Some mempool hw like octeontx/fpa block, demands block size
(/total_elem_sz) aligned object start address.
Introducing an MEMPOOL_F_CAPA_BLK_ALIGNED_OBJECTS flag.
If this flag is set:
- Align object start address(vaddr) to a multiple of total_elt_sz.
- Allocate one additional object. Additional object is needed to make
sure that requested 'n' object gets correctly populated.
Example:
- Let's say that we get 'x' size of memory chunk from memzone.
- And application has requested 'n' object from mempool.
- Ideally, we start using objects at start address 0 to...(x-block_sz)
for n obj.
- Not necessarily first object address i.e. 0 is aligned to block_sz.
- So we derive 'offset' value for block_sz alignment purpose i.e..'off'.
- That 'off' makes sure that start address of object is blk_sz aligned.
- Calculating 'off' may end up sacrificing first block_sz area of
memzone area x. So total number of the object which can fit in the
pool area is n-1, Which is incorrect behavior.
Therefore we request one additional object (/block_sz area) from memzone
when MEMPOOL_F_CAPA_BLK_ALIGNED_OBJECTS flag is set.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The memory area containing all the objects must be physically
contiguous.
Introducing MEMPOOL_F_CAPA_PHYS_CONTIG flag for such use-case.
The flag useful to detect whether pool area has sufficient space
to fit all objects. If not then return -ENOSPC.
This way, we make sure that all object within a pool is contiguous.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Allow the mempool driver to advertise his pool capabilities.
For that pupose, an api(rte_mempool_ops_get_capabilities)
and ->get_capabilities() handler has been introduced.
- Upon ->get_capabilities() call, mempool driver will advertise
his capabilities to mempool flags param.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
xmem_size and xmem_usage need to know the status of mempool flags,
so add 'flags' arg in _xmem_size/usage() api.
Following patch will make use of that.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
mp->flags is int and mempool API writes unsigned int
value in 'flags', so fix the 'flags' data type.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Now that dpdk supports more than one mempool drivers and
each mempool driver works best for specific PMD, example:
- sw ring based mempool for Intel PMD drivers.
- dpaa2 HW mempool manager for dpaa2 PMD driver.
- fpa HW mempool manager for Octeontx PMD driver.
Application would like to know the best mempool handle
for any port.
Introducing rte_eth_dev_pool_ops_supported() API,
which allows PMD driver to advertise
his supported pool capability to the application.
Supported pools are categorized in below priority:-
- Best mempool handle for this port (Highest priority '0')
- Port supports this mempool handle (Priority '1')
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
DPDK has support for both sw and hw mempool and
currently user is limited to use ring_mp_mc pool.
In case user want to use other pool handle,
need to update config RTE_MEMPOOL_OPS_DEFAULT, then
build and run with desired pool handle.
Introducing eal option to override default pool handle.
Now user can override the RTE_MEMPOOL_OPS_DEFAULT by passing
pool handle to eal `--mbuf-pool-ops-name=""`.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
iova autodetection depends on rte_bus_scan result. Result of bus scan will
have updated device_list and each device in that list has its '.kdev' state
updated. That kdrv state used to detect iova mapping mode for that device.
_device_parse() has dependency on rt_bus_scan so,
Below calls moved up in the eal initialization order:
- eal_option_device_parse
- rte_bus_scan
And based on the result of rte_bus_scan_iommu_class - select iova
mapping mode.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Introducing rte_eal_iova_mode() helper API. This API
used by non-eal library for detecting iova mode.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
API(rte_bus_get_iommu_class) helps to automatically detect and select
appropriate iova mapping scheme for iommu capable device on that bus.
Algorithm for iova scheme selection for bus:
0. Iterate through bus_list.
1. Collect each bus iova mode value and update into 'mode' var.
2. Mode selection scheme is:
if mode == 0 then iova mode is _pa,
if mode == 1 then iova mode is _pa,
if mode == 2 then iova mode is _va,
if mode == 3 then iova mode ia _pa.
So mode !=2 will be default iova mode (_pa).
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Get iommu class of PCI device on the bus and returns preferred iova
mapping mode for that bus.
Patch also introduces RTE_PCI_DRV_IOVA_AS_VA drv flag.
Flag used when driver needs to operate in iova=va mode.
Algorithm for iova scheme selection for PCI bus:
0. If no device bound then return with RTE_IOVA_DC mapping mode,
else goto 1).
1. Look for device attached to vfio kdrv and has .drv_flag set
to RTE_PCI_DRV_IOVA_AS_VA.
2. Look for any device attached to UIO class of driver.
3. Check for vfio-noiommu mode enabled.
If 2) & 3) is false and 1) is true then select
mapping scheme as RTE_IOVA_VA. Otherwise use default
mapping scheme (RTE_IOVA_PA).
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Introducing rte_pci_get_iommu_class API which helps to get iommu class
of PCI device on the bus and returns preferred iova mapping mode for
PCI bus.
Patch also adds rte_pci_get_iommu_class definition for:
- bsdapp: api returns default iova mode.
- linuxapp: Has stub implementation, Followup patch has complete
implementation.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Export rte_pci_match() function as it needed in the followup patch.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
As for the testpmd flow command which uses uint16_t since the beginning by
chance, switch to portid_t for consistency.
Fixes: 14ab03825b1d ("ethdev: increase port id range")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
In order to support more than 256 virtual ports, the field "port"
in rte_mbuf has been increased to 16 bits. The initialization/reset
value of the field "port" should be changed from 0xff to 0xffff
accordingly.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Extend port_id definition from uint8_t to uint16_t in lib and drivers
data structures, specifically rte_eth_dev_data. Modify the APIs,
drivers and app using port_id at the same time.
Fix some checkpatch issues from the original code and remove some
unnecessary cast operations.
release_17_11 and deprecation docs have been updated in this patch.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
There are two bonding APIs using ABI versioning, and both have
port_id as parameter. Since we are already breaking ABI, no need
to keep older versions of APIs.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Before this patch, the devices discovered from VFIO layer were
being added in the device list in the order received from directory
scan. This causes an issue in case devices are reordered.
This patch makes all the devices inserted in the device list in
sorted order according to their name.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
enable the printing of objects during debuging.
use RTE_LOG to avoid function name printing for object name.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Instead of enabling the RX checksum by default, make it
enable only with user ethernet configuration
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The current code is sending 8 packet in each internal loop.
In some of the conditions, mbuf is being allocated or freed.
In case of error, the code is returning without taking care of
such buffer. It is better to send already prepared buffer and err
for the current failure only.
Fixes: 9e5f3e6d36 ("net/dpaa2: handle non-hardware backed buffer pool")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
name alignment for check command and result functions
putting them as separate functions instead of changing the original
functions.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
QMan5.0 supports up to 32 frames in one volatile dequeue
command. For the older Qman versions which only support
up to 16 frames, the highest bit in NUMF will be ignored.
Signed-off-by: Haiying Wang <haiying.wang@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The word_copy is not as efficient as expected, so remove it from
this driver.
Signed-off-by: Haiying Wang <haiying.wang@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
