Add support for parsing the packet type and L2/L3 checksum offload
capability information.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Add support for get/set_eeprom, get_eeprom_length dev_ops.
Defined the structures required to get/set the eeprom length/data
in hsi_struct_defs hdr file along with implementation.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This removes the dependency on specific Mellanox OFED libraries by
using the upstream rdma-core and linux upstream community code.
Both rdma-core upstream and Mellanox OFED are Linux user-space packages:
1. Rdma-core is Linux upstream user-space package.(Generic)
2. Mellanox OFED is Mellanox's Linux user-space package.(Proprietary)
The difference between the two are the APIs towards the kernel.
Support for x86-32 is removed due to issues in rdma-core library.
ICC compilation will be supported as soon as the following patch is
integrated in rdma-core:
https://marc.info/?l=linux-rdma&m=150643474705690&w=2
Signed-off-by: Shachar Beiser <shacharbe@mellanox.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
The flow API is supported in TAP PMD if flower is supported in Linux.
Some commands are combined to suggest a convenient check of its support
by the running kernel.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
- Use rte_malloc() instead of malloc() for the per device 'vdev' structure
so that it can be shared across processes.
- Only initialize the device if the process type is RTE_PROC_PRIMARY
- Only allow the primary process to do queue setup, start/stop, promisc
allmulticast, mac add/del, mtu.
Fixes: fefed3d1e6 ("enic: new driver")
Cc: stable@dpdk.org
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Mellanox NICs has a limitation on the number of mbuf segments a multi
segment mbuf can have. The max number depends on the Tx offloads
requested.
The current code not enforce such limitation, which might cause
malformed work requests to be written to the device.
This commit adds verification for the number of mbuf segments posted
to the device. In case of overflow the packet will not be sent.
In addition update the nic documentation with the limitation.
Considering device limitation is 63 data segments in a work request, the
maximum number of segment in mbuf was calculated taking TSO as the worst
case:
max_nb_segs = 63 - (control_segment + ethernet segment +
TSO headers inline + inline segment +
extra inline to align to cacheline)
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Extend the LSC event handling to support the device removal as well.
The mlx5 event handling has been made capable of receiving and
signaling several event types at once.
This support includes next:
1. Removal event detection according to the user configuration.
2. Calling to all registered mlx5 removal callbacks.
3. Capabilities extension to include removal interrupt handling.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
NFP PMD implement now PF and VF drivers. Although the driver
functionality is the same by now, except for initialization, it
will change with future PF additions.
A new feature is required for describing the firmware upload
capability coming with the NFP PF now, so the PF file will be
updated soon in another patch.
SRIOV is not supported by the PF yet, and it is wrong to include it
as a VF driver feature, so none of the files have such a feature.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
NFP PMD has now support for both, PF and VFs. This patch updates
the guide and give some information about implications.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Reviewed-by: John McNamara <john.mcnamara@intel.com>
The Verbs API used to implement Tx and Rx burst functions is deprecated.
Drop scatter/gather support to ease refactoring while maintaining basic
single-segment Rx/Tx functionality in the meantime.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The Verbs API used to implement packet type recognition is deprecated.
Support will be added back after refactoring the PMD.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The Verbs API used to implement Tx and Rx checksum offloads is deprecated.
Support for these will be added back after refactoring the PMD.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The Verbs RSS API used in this PMD is now obsolete. It is superseded by an
enhanced API with fewer constraints already used in the mlx5 PMD.
Drop RSS support in preparation for a major refactoring. The ability to
configure several Rx queues is retained, these can be targeted directly by
creating specific flow rules.
There is no need for "ignored" Rx queues anymore since their number is no
longer limited to powers of two.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Only the default port MAC address remains and is not configurable.
This is done in preparation for a major refactoring.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This option both sets the maximum number of segments for Rx/Tx packets and
whether scattered mode is supported at all. This commit removes the latter
as well as configuration file exposure since the most appropriate value
should be decided at run-time.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Current implementation is partial (Tx only), not convenient to use and
not of primary concern.
Remove this feature before refactoring the PMD.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Copyright lasts long enough not to require notices to be updated yearly.
The current approach of updating them occasionally while working on
unrelated tasks should be deprecated in favor of dedicated commits updating
all files at once when necessary.
Standardize on a single year per copyright owner.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This patch adds link to the DPDK i40e doc,
which is how to upgrade firmware guide for users.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Support for the feature is added to EFX Tx datapath
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Support for the feature is added to EFX Rx datapath
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Support MTU change in the range ETHER_MIN_MTU to PF_MTU. A drop in PF
MTU lowers VF MTU if it goes out of range.
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Secondary process is a copy/paste of the mlx4 drivers, it was never
tested and it even segfault at the secondary process start in the
mlx5_pci_probe().
This makes more sense to wipe this non working feature to re-write a
working and functional version.
Fixes: a48deada65 ("mlx5: allow operation in secondary processes")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
These PMDs must be versioned because they have an API.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Zhiyong Yang <zhiyong.yang@intel.com>
The patch simplifies DPDK applications analysis for developers which use
Intel® VTune Amplifier.
The empty cycles are such iterations that yielded no RX packets. As far as
DPDK is running in poll mode, wasting cycles is equal to wasting CPU time.
Tracing such iterations can identify that device is underutilized. Tracing
empty cycles becomes even more critical if a system uses a lot of Ethernet
ports.
The patch gives possibility to analyze empty cycles without changing
application code. All needs to be done is just to reconfigure and rebuild
the DPDK itself with CONFIG_RTE_ETHDEV_PROFILE_ITT_WASTED_RX_ITERATIONS
enbled. The important thing here is that this does not affect DPDK code.
The profiling code is not being compiled if user does not specify config
flag.
The patch provides common way to inject RX queues profiling and VTune
specific implementation.
Signed-off-by: Ilia Kurakin <ilia.kurakin@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
