This patch introduces rte_vhost_iovec struct that contains
both source and destination addresses since we always have
a 1:1 mapping between source and destination. While using
the standard iovec struct might have seemed better, having
to duplicate IO vectors and its iterators is memory
inefficient and make the implementation more complex.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Reviewed-by: Jiayu Hu <jiayu.hu@intel.com>
Reaching the async batch threshold was one of the condition
to trigger the DMA transfer. However, this condition was
never met since the threshold value is 32, same as the
MAX_PKT_BURST value.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Reviewed-by: Jiayu Hu <jiayu.hu@intel.com>
This patch splits the iterator arrays in two, one for
source and one for destination. The goal is make the code
easier to understand.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Reviewed-by: Jiayu Hu <jiayu.hu@intel.com>
IO vectors implementation is unnecessarily complex, mixing
source and destinations vectors in the same array.
This patch declares two arrays, one for the source and one
for the destination. It also gets rid of seg_awaits variable
in both packed and split implementation, which is the same
as iovec_idx.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Reviewed-by: Jiayu Hu <jiayu.hu@intel.com>
This patch moves async_inflight_info struct to internal
header since it should not be part of the API.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Reviewed-by: Jiayu Hu <jiayu.hu@intel.com>
This patch moves async-related metadata from vhost_virtqueue
to a dedicated struct. It makes it clear which fields are
async related, and also saves some memory when async feature
is not in use.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Reviewed-by: Jiayu Hu <jiayu.hu@intel.com>
Link update callback reports speed/duplex based on data
filled on device initialization. This is wrong in case of
VIRTIO_NET_F_SPEED_DUPLEX is negotiated since link could
be down at this time. Fix this function to actually
update the HW data in this case with respect to the fact
that specifying speed via devarg is a highest priority.
Fixes: 1357b4b36246 ("net/virtio: support Virtio link speed feature")
Cc: stable@dpdk.org
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
In l3fwd-power, there is default port configuration which requires
RSS and IPv4/UDP/TCP checksum. Once device does not support these,
the l3fwd-power will exit and report an error.
This patch updates the port configuration based on device capabilities
after getting the device information to support devices like virtio
and vhost.
Signed-off-by: Miao Li <miao.li@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Since some vdevs like virtio and vhost do not support rxq_info_get and
queue state inquiry, the error return value -ENOTSUP need to be ignored
when queue_stopped cannot get rx queue information and rx queue state.
This patch changes the return value of queue_stopped when
rte_eth_rx_queue_info_get return -ENOTSUP to support vdevs which cannot
provide rx queue information and rx queue state enable power management.
Fixes: 209fd585456c ("power: make ethdev power management thread unsafe")
Cc: stable@dpdk.org
Signed-off-by: Miao Li <miao.li@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
According to current semantics of power monitor, this commit adds a
callback function to decide whether aborts the sleep by checking
current value against the expected value and vhost_get_monitor_addr
to provide address to monitor. When no packet come in, the value of
address will not be changed and the running core will sleep. Once
packets arrive, the value of address will be changed and the running
core will wakeup.
Signed-off-by: Miao Li <miao.li@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
This commit defines rte_vhost_power_monitor_cond which is used to pass
some information to vhost driver. The information is including the
address to monitor, the expected value, the mask to extract value read
from 'addr', the value size of monitor address, the match flag used to
distinguish the value used to match something or not match something.
Vhost driver can use these information to fill rte_power_monitor_cond.
Signed-off-by: Miao Li <miao.li@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
According to current semantics of power monitor, this commit adds a
callback function to decide whether aborts the sleep by checking
current value against the expected value and virtio_get_monitor_addr
to provide address to monitor. When no packet come in, the value of
address will not be changed and the running core will sleep. Once
packets arrive, the value of address will be changed and the running
core will wakeup.
Signed-off-by: Miao Li <miao.li@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Async DMA map status flag was added to prevent the unnecessary unmap
when DMA devices bound to kernel driver. This brings maintenance cost
for a lot of code. This patch removes the DMA map status by using
rte_errno instead.
This patch relies on the following patch to fix a partial
unmap check in vfio unmapping API.
[1] https://www.mail-archive.com/dev@dpdk.org/msg226464.html
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch adds missing IPv6-Ex and GTPU flow types to port
info command. It also add the same definitions to
str2flowtype(), used to configure flow director.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
This patch fixes RETA updating for entries above 64.
Without that, these entries are never updated as
calculated mask value will always be 0.
Fixes: 634efbc2c8c0 ("mlx5: support RETA query and update")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
This patch fixes the display of the RSS hash types
configured in the port, which displayed "all" even
if only a single type was configured
Fixes: 3c90743dd3b9 ("app/testpmd: support more types for flow RSS")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
port_rss_hash_key_update() initializes rss_conf with the
RSS key configuration provided by the user, but it calls
rte_eth_dev_rss_hash_conf_get() before calling
rte_eth_dev_rss_hash_update(), which overrides the parsed
RSS config.
While the RSS key value is set again after, this is not
the case of the key length. It could cause out of bounds
access if the key length parsed is smaller than the one
read from rte_eth_dev_rss_hash_conf_get().
This patch restores the key length before the
rte_eth_dev_rss_hash_update() call to ensure the RSS key
value/length pair is consistent.
Fixes: 8205e241b2b0 ("app/testpmd: add missing type to RSS hash commands")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Provide the capability to update the hash key, hash types
and RETA table on the fly (without needing to stop/start
the device). However, the key length and the number of RETA
entries are fixed to 40B and 128 entries respectively. This
is done in order to simplify the design, but may be
revisited later as the Virtio spec provides this
flexibility.
Note that only VIRTIO_NET_F_RSS support is implemented,
VIRTIO_NET_F_HASH_REPORT, which would enable reporting the
packet RSS hash calculated by the device into mbuf.rss, is
not yet supported.
Regarding the default RSS configuration, it has been
chosen to use the default Intel ixgbe key as default key,
and default RETA is a simple modulo between the hash and
the number of Rx queues.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
host-based-truflow devarg is not used anymore to enable host based
flow table management functionality TruFlow. Instead this feature is
now driven by a capability indicated by the firmware.
TruFlow is not in tech preview anymore. Update the doc accordingly.
Fixes: da3731e2ea00 ("net/bnxt: check FW capability to support TRUFLOW")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Support for runtime Rx/Tx queue setup and inner RSS is not updated.
Update feature matrix for bnxt PMD.
Fixes: 7ed45b1a7c0f ("net/bnxt: support RSS hash selection")
Fixes: 0105ea1296c9 ("net/bnxt: support runtime queue setup")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Remove a stale compile option from meson build file.
RTE_LIBRTE_BNXT_TF sneaked in incorrectly.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
After DCF is reset by PF, the VSI update service is unable to be
completed since the DCF resource is invalid.
This patch removes the call to service that updates VSI since it is
useless and output too many error messages.
Fixes: c7e1a1a3bfeb ("net/ice: refactor DCF VLAN handling")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add watchdog to iAVF PMD which support monitoring the VFLR register. If
the device is not already in reset then if a VF reset in progress is
detected then notify user through callback and set into reset state.
If the device is already in reset then poll for completion of reset.
The watchdog is disabled by default, to enable it set
IAVF_DEV_WATCHDOG_PERIOD to a non zero value (microseconds)
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add per queue counters for maintaining statistics for inline IPsec
crypto offload, which can be retrieved through the
rte_security_session_stats_get() with more detailed errors through the
rte_ethdev xstats.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add support for inline crypto for IPsec, for ESP transport and
tunnel over IPv4 and IPv6, as well as supporting the offload for
ESP over UDP, and in conjunction with TSO for UDP and TCP flows.
Implement support for rte_security packet metadata
Add definition for IPsec descriptors, extend support for offload
in data and context descriptor to support
Add support to virtual channel mailbox for IPsec Crypto request
operations. IPsec Crypto requests receive an initial acknowledgment
from physical function driver of receipt of request and then an
asynchronous response with success/failure of request including any
response data.
Add enhanced descriptor debugging
Refactor of scalar tx burst function to support integration of offload
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Reviewed-by: Jingjing Wu <jingjing.wu@intel.com>
Rework the Tx path and Tx descriptor usage in order to
allow for better use of offload flags and to facilitate enabling of
inline crypto offload feature.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
An external project that wants to do additional checks on fields
endianness can remap rte_beXX types to instrumented types and use
sparse.
The current code breaks OVS build with sparse:
../../lib/ofp-packet.c: note: in included file (through
.../ovs/dpdk-dir/build/include/rte_flow.h, ../../lib/netdev-dpdk.h,
../../lib/dp-packet.h):
.../ovs/dpdk-dir/build/include/rte_l2tpv2.h:92:37:
error: invalid bitfield specifier for type restricted ovs_be16.
.../ovs/dpdk-dir/build/include/rte_l2tpv2.h:93:37:
error: invalid bitfield specifier for type restricted ovs_be16.
.../ovs/dpdk-dir/build/include/rte_l2tpv2.h:94:40:
error: invalid bitfield specifier for type restricted ovs_be16.
.../ovs/dpdk-dir/build/include/rte_l2tpv2.h:95:37:
error: invalid bitfield specifier for type restricted ovs_be16.
.../ovs/dpdk-dir/build/include/rte_l2tpv2.h:96:40:
error: invalid bitfield specifier for type restricted ovs_be16.
.../ovs/dpdk-dir/build/include/rte_l2tpv2.h:97:37:
error: invalid bitfield specifier for type restricted ovs_be16.
.../ovs/dpdk-dir/build/include/rte_l2tpv2.h:98:37:
error: invalid bitfield specifier for type restricted ovs_be16.
.../ovs/dpdk-dir/build/include/rte_l2tpv2.h:99:40:
error: invalid bitfield specifier for type restricted ovs_be16.
.../ovs/dpdk-dir/build/include/rte_l2tpv2.h💯39:
error: invalid bitfield specifier for type restricted ovs_be16.
make[3]: *** [lib/ofp-packet.lo] Error 1
Use simple uint16_t types for bitfields in L2TPv2 struct.
Fixes: 3a929df1f286 ("ethdev: support L2TPv2 and PPP procotol")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
There is no point to do rte_eth_dev_mtu_set() before configure since
set MTU value is overwritten on configure anyway. So, setting of MTU
before configure is rejected now on ethdev level.
If testpmd is going to do configure (e.g. just after testpmd start
with disabled devices start up or any configuration changes in stopped
state which require reconfigure), just save requested MTU in device
config to be applied on reconfigure.
Fixes: 1bb4a528c41f ("ethdev: fix max Rx packet length")
Fixes: b26bee10ee37 ("ethdev: forbid MTU set before device configure")
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In "msg_type |= 0xc800", wider "51200" has high-order bits (0xc800)
that don't affect the narrower left-hand side.
This patch fixes coverity issue by changing the definition type of
"msg_type" from uint8_t to uint16_t.
Coverity issue: 373651
Fixes: 748530f0354e ("app/testpmd: support L2TPv2 and PPP protocol pattern")
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Rx ring for representors does not use aggregation rings for Rx.
Instead they use simple software buffers for handling Rx packets.
So there is no need to use the same cleanup routine as done by
the non-representor code path.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Minor fixes are needed in the RTE_FLOW RSS action parser.
1. Update the comment in the parser to indicate RSS level 1 implies RSS
on outer header.
2. RSS action will not be supported if level is > 1.
3. RSS action will not be supported if user or application specifies
MARK or COUNT action.
4. If RSS types is not specified i.e., is 0, the best effort RSS should
use IPv4 and IPv6 headers. Currently we are considering only IPv4.
Fixes: 239695f754cb ("net/bnxt: enhance RSS action support")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Move the Rx queue state update before bnxt_setup_one_vnic()
is called. For Thor, rxq->rx_started and eth_dev->data->rx_queue_state[]
needs to be set for all queues before bnxt_hwrm_vnic_cfg() or
bnxt_vnic_rss_configure() are called.
Fixes: 0105ea1296c9 ("net/bnxt: support runtime queue setup")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Integrity item validation and translation must verify that integrity
item bits match L3 and L4 items in flow rule pattern.
For cases when integrity item was positioned before L3 header, such
verification must be split into two stages.
The first stage detects integrity flow item and makes initializations
for the second stage.
The second stage is activated after PMD completes processing of all
flow items in rule pattern. PMD accumulates information about flow
items in flow pattern. When all pattern flow items were processed,
PMD can apply that data to complete integrity item validation
and translation.
Fixes: 79f8952783d0 ("net/mlx5: support integrity flow item")
Cc: stable@dpdk.org
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
MLX5 PMD can match on integrity bits for inner and outer headers in
a single flow.
That means a single flow rule can reference both inner and outer
integrity bits. That is implemented by adding 2 flow integrity items
to a rule - one item for outer integrity bits and other for
inner integrity bits.
Integrity item `level` parameter specifies what part is being
targeted.
Current PMD treated integrity items for outer and inner headers as
the same.
The patch separates PMD verifications for inner and outer integrity
items.
Fixes: 79f8952783d0 ("net/mlx5: support integrity flow item")
Cc: stable@dpdk.org
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Multiple rules could use the same encap_decap/modify_hdr/counter action.
The flow dump data could be duplicated.
To avoid redundancy, flow dump value is based on the actions' pointer
instead of previous rules' pointer.
For counter, the data is stored in cmng of priv->sh.
For encap_decap/modify_hdr, the data stored in encaps_decaps/modify_cmds.
Traverse the fields and get action's pointer and information.
Formats are same for information in the dump except "id" stands for
actions' pointer:
Counter: rec_type,id,hits,bytes
Modify_hdr: rec_type,id,actions_number,actions
Encap_decap: rec_type,id,buf
Signed-off-by: Haifei Luo <haifeil@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
During the device spawn process, mlx5 PMD queried the available flow
priorities by calling mlx5_flow_discover_priorities, queried
if the DR drop action was supported on the root table by calling
the mlx5_flow_discover_dr_action_support routine, and queried the
availability of metadata register C by calling mlx5_flow_discover_mreg_c
These functions created the test flows to get the supported fields, and
at the end destroyed the test flows. The test flows in the first two
functions was created on the root table.
If the device was spawned with multiple representors, these test flows
were created and destroyed on each representor as well. The above
operations took a significant amount of init time during the device
spawn.
This patch optimizes the device discover functions, if there is
the device with multiple representors (VF/SF) being spawned,
the priority and drop action and metadata register support check can be
done only ones and check results can be shared for all representors.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Remove debug log inside of mlx5_list_init to avoid flooding debug
messages when creating hash list with large actual size.
Fixes: 9c373c524bae ("common/mlx5: move list utility from net driver")
Cc: stable@dpdk.org
Signed-off-by: Sean Zhang <xiazhang@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
In socket direct mode, it's possible to bind any two (maybe four
in future) PCIe devices with IDs like xxxx:xx:xx.x and
yyyy:yy:yy.y. Bonding member interfaces are unnecessary to have
the same PCIe domain/bus/device ID anymore,
Kernel driver uses "system_image_guid" to identify if devices can
be bound together or not. Sysfs "phys_switch_id" is used to get
"system_image_guid" of each network interface.
OFED 5.4+ is required to support "phys_switch_id".
Signed-off-by: Rongwei Liu <rongweil@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
sysfs entry "phys_switch_id" holds each PCIe device'
guid.
The devices which reside in the same physical NIC should
have the same guid.
Signed-off-by: Rongwei Liu <rongweil@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The shared pointer is initialized to a static local array defined in the
primary process and it shall not be accessed in the secondary process.
This patch copies the local data to shared data, to avoid data access
violation.
Fixes: 040b44551f77 ("net/iavf: unify Rx packet type table")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch uses the index value to call the function, instead of the
function pointer assignment to save the selection of Receive Flex
Descriptor profile ID.
Otherwise the secondary process will run with wrong function address
from primary process.
Fixes: 7a340b0b4e03 ("net/ice: refactor Rx FlexiMD handling")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
After DCF is reset by PF, the DCF device un-initialization cannot
function normally, ignore the failure does not help since the kernel
does not clean up resource.
The patch workaround the issue by triggering an additional DCF enable/
disable cycle when a passive reset is detected.
Fixes: 1a86f4dbdf42 ("net/ice: support DCF device reset")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Warning continuously is a pain when developping or if a unit test
is/gets broken.
It could also be a problem if application behaves badly only in some
corner cases and a DoS results of those logs being continuously displayed.
Let's warn once per port and per rx/tx.
Getting such a log is scary, but let's make it more eye catching by
dumping a backtrace with it.
Tested by introducing a bug in testpmd:
static int
eth_dev_start_mp(uint16_t port_id)
{
- if (is_proc_primary())
+ if (!is_proc_primary())
return rte_eth_dev_start(port_id);
return 0;
Then, running a basic null test:
$ ./devtools/test-null.sh
...
Start automatic packet forwarding
io packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support
enabled, MP allocation mode: native
Logical Core 1 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
lcore 0 called rx_pkt_burst for not ready port 0
8: [build/app/dpdk-testpmd() [0x59e839]]
7: [/lib64/libc.so.6(__libc_start_main+0xf5) [0x7ff481b69555]]
6: [build/app/dpdk-testpmd(main+0x54b) [0x662d24]]
5: [build/app/dpdk-testpmd(start_packet_forwarding+0x263) [0x65e795]]
4: [build/app/dpdk-testpmd() [0x65e1be]]
3: [build/app/dpdk-testpmd() [0x65a996]]
2: [build/app/dpdk-testpmd() [0xa6cbc7]]
1: [build/app/dpdk-testpmd(rte_dump_stack+0x27) [0xaee796]]
lcore 0 called rx_pkt_burst for not ready port 1
8: [build/app/dpdk-testpmd() [0x59e839]]
7: [/lib64/libc.so.6(__libc_start_main+0xf5) [0x7ff481b69555]]
6: [build/app/dpdk-testpmd(main+0x54b) [0x662d24]]
5: [build/app/dpdk-testpmd(start_packet_forwarding+0x263) [0x65e795]]
4: [build/app/dpdk-testpmd() [0x65e1be]]
3: [build/app/dpdk-testpmd() [0x65a996]]
2: [build/app/dpdk-testpmd() [0xa6cbc7]]
1: [build/app/dpdk-testpmd(rte_dump_stack+0x27) [0xaee796]]
io packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0x0 Tx offloads=0x0
Fixes: c87d435a4d79 ("ethdev: copy fast-path API into separate structure")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Driver is using 'ETH_FRAME_LEN' Linux defined value as max frame length,
which doesn't include FCS (4 bytes CRC). But ethdev by default uses
frame size with FCS when application doesn't define any explicit value.
As a result device configuration fails because device is tried to be
configured with a frame size length that is bigger than what device
reported as supported. Device reports as max supported frame size is
1514 but configured value is 1518.
Instead use DPDK macro, 'RTE_ETHER_MAX_LEN', that includes FCS in the
driver to report the max supported frame size, this matches to the
initial intention.
Fixes: 1bb4a528c41f ("ethdev: fix max Rx packet length")
Reported-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: David Christensen <drc@linux.vnet.ibm.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Driver is using 'ETH_FRAME_LEN' Linux defined value as max frame length,
which doesn't include FCS (4 bytes CRC). But ethdev by default uses
frame size with FCS when application doesn't define any explicit value.
As a result device configuration fails because device is tried to be
configured with a frame size length that is bigger than what device
reported as supported. Device reports as max supported frame size is
1514 but configured value is 1518.
Instead use DPDK macro, 'RTE_ETHER_MAX_LEN', that includes FCS in the
driver to report the max supported frame size, this matches to the
initial intention.
Fixes: 1bb4a528c41f ("ethdev: fix max Rx packet length")
Reported-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Since its introduction in 2018, the SIGBUS handler was never registered,
and all related functions were unused.
A SIGBUS can be received by the application when accessing to hugepages
even if mmap() was successful, This happens especially when running
inside containers when there is not enough hugepages. In this case, we
need to recover. A similar scheme can be found in eal_memory.c.
Fixes: 582bed1e1d1d ("mem: support mapping hugepages at runtime")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: David Marchand <david.marchand@redhat.com>
