No need to access rx_cfa_code, cfa_code_map from the VF-Rep functions
anymore.
Fixes: 322bd6e70272 ("net/bnxt: add port representor infrastructure")
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added TruFlow hash API for common hash uses across TruFlow
core functions.
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
'port_id' storage size should be 'uint16_t', the API
'rte_pmd_dpaa_set_tx_loopback()' has it as 'uint8_t' but fixing it is an
ABI breakage, that is why planning the fix in v20.11 release where ABI
breakage is allowed.
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Zhiyong Yang <zhiyong.yang@intel.com>
Following the new RegEx class.
There is a need to create a dedicated test application in order to
validate this class and PMD.
Unlike net device this application loads data from a file.
This commit introduces the new RegEx test app.
The basic app flow:
1. Configure the RegEx device to use one queue, and set the rule
database, using precompiled file.
2. Allocate mbufs based on the requested number of jobs, each job will
i get one mbuf.
3. Enqueue as much as possible jobs.
4. Dequeue jobs.
5. if the number of dequeue jobs < requested number of jobs job to step
Signed-off-by: Ori Kam <orika@mellanox.com>
Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
This patch updates 20.08 release notes inside
the part that describe changes in Intel QuickAssist PMD.
Fixes: faa57df0b458 ("crypto/qat: support ChaCha20-Poly1305")
Fixes: 9904ff684981 ("common/qat: improve multi-process handling")
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This adds pci detection and documentation for Intel GEN2
QuickAssist device 200xx (PF Did 0x18ee, VF Did 0x18ef).
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Add generic mlx5 PCI PMD layer as part of existing common_mlx5
module. This enables multiple classes (net, regex, vdpa) PMDs
to be supported at same time.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
fixed typing error in doc/guides/tools/testbbdev.rst
Fixes: f714a18885a6 ("app/testbbdev: add test application for bbdev")
Cc: stable@dpdk.org
Signed-off-by: Sarosh Arif <sarosh.arif@emumba.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>
The display was not proper due to the missing space. Changed
arm64 to aarch64.
Fixes: 2eb7c526b929 ("doc: clarify IOMMU disabling for uio_pci_generic")
Cc: stable@dpdk.org
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
There are some limitations on some NICs (at least on ConnectX-6 Dx
and BlueField 2) with supporting FCS (frame checksum) scattering for
the tunnel decapsulated packets.
For the case only one of the features can be supported in the same time,
and the new devarg "decap_en" is introduced to provide the choice to the
users.
If FCS scattering feature is not supposed to be engaged by application,
this new devarg should be specified as "decap_en=0", forcing the FCS
feature enable and rejecting tunnel decap actions in the rte_flow engine.
If FCS scatter is not needed and application supposes to use tunnel
decapsulation in rte_flow, the devarg can be omitted or set to non-zero
value (this is default settings).
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
As scatter FCS might be not supported for decapsulated tunnel
packets in some NIC HW, a new capability bit which indicates
if scatter FCS works with decap is added.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Currently, for MLX5 PMD, once millions of flows created, the memory
consumption of the flows are also very huge. For the system with limited
memory, it means the system need to reserve most of the memory as huge
page memory to serve the flows in advance. And other normal applications
will have no chance to use this reserved memory any more. While most of
the time, the system will not have lots of flows, the reserved huge
page memory becomes a bit waste of memory at most of the time.
By the new sys_mem_en devarg, once set it to be true, it allows the PMD
allocate the memory from system by default with the new add mlx5 memory
management functions. Only once the MLX5_MEM_RTE flag is set, the memory
will be allocate from rte, otherwise, it allocates memory from system.
So in this case, the system with limited memory no need to reserve most
of the memory for hugepage. Only some needed memory for datapath objects
will be enough to allocated with explicitly flag. Other memory will be
allocated from system. For system with enough memory, no need to care
about the devarg, the memory will always be from rte hugepage.
One restriction is that for DPDK application with multiple PCI devices,
if the sys_mem_en devargs are different between the devices, the
sys_mem_en only gets the value from the first device devargs, and print
out a message to warn that.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Update the release notes of mlx5 PMD part by adding the
support of eCPRI.
Update the firmware configuration in the mlx5 NIC guide to support
the usage of eCPRI.
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This patch introduces the new devargs:
tx_pp - enables accurate packet send scheduling on mbuf timestamps
in the PMD. On the device start if "rte_dynflag_timestamp"
dynamic flag is registered and this devarg non-zero value is
specified, the driver initializes all necessary internal
infrastructure to provide packet scheduling. The parameter
value specifies scheduling granularity in nanoseconds.
tx_skew - the parameter adjusts the send packet scheduling on
timestamps and represents the average delay between beginning
of the transmitting descriptor processing by the hardware and
appearance of actual packet data on the wire. The value should
be provided in nanoseconds and is valid only if tx_pp parameter
is specified. The default value is zero.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
DEV_RX_OFFLOAD_TIMESTAMP is per port, so the internal implementation
shall enable it on per port basis only.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Two new sync modes were introduced into rte_ring:
relaxed tail sync (RTS) and head/tail sync (HTS).
This change provides user with ability to select these
modes for ring based mempool via mempool ops API.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Gage Eads <gage.eads@intel.com>
This commit introduce the RegEx poll mode drivers class, and
adds Mellanox RegEx PMD.
Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
Signed-off-by: Ori Kam <orika@mellanox.com>
refcnt_atomic member in structures rte_mbuf and rte_mbuf_ext_shared_info
will be removed in 20.11 release.
Suggested-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Signed-off-by: Phil Yang <phil.yang@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: David Marchand <david.marchand@redhat.com>
RTE_FLOW API allows hardware parsing and steering of packets to specific
queues which helps in distributing ingress traffic across various cores.
Adding 'flow' rules allows user to specify the distribution required.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch updates the minimum driver version that supports
Intel QuickAssist device D15xx.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Multi-segment mbufs are not supported for DOCSIS security protocol.
This patch adds an explicit check for this and returns an op error if
this case is found. This limitation is also added to the QAT cryptodev
documentation.
Fixes: 6f0ef237404b ("crypto/qat: support DOCSIS protocol")
Signed-off-by: David Coyle <david.coyle@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
The patch reverts the commit that updated Intel QuickAssist GEN3
marketing name. The change was not backported and has to be withdrawn.
This reverts commit 9cd9d3e702fba4700539c1a2eddac13dd14ecf70
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Add information about possible optimizations using C11 atomic builtins.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
This change is required to allow the branch ratio algorithm to
power manage cores with no workload running on them. This is
useful both when idle cores don't use C-states and for a number of
hyperthreading scenarios.
Signed-off-by: Rory Sexton <rory.sexton@intel.com>
Reviewed-by: David Hunt <david.hunt@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
This modification allows for the branch ratio threshold to be set
per core rather than system wide. This gives greater flexibility to
the branch ratio monitoring allowing it to manage different
workloads with different characteristics on the same system.
Signed-off-by: Rory Sexton <rory.sexton@intel.com>
Reviewed-by: David Hunt <david.hunt@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Add a new item "rte_flow_item_ecpri" in order to match eCRPI header.
eCPRI is a packet based protocol used in the fronthaul interface of
5G networks. Header format definition could be found in the
specification via the link below:
https://www.gigalight.com/downloads/standards/ecpri-specification.pdf
eCPRI message can be over Ethernet layer (.1Q supported also) or over
UDP layer. Message header formats are the same in these two variants.
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The new 5-tuple swap engine swaps:
source and destination mac address,
source and destination address in ipv4/ipv6,
source and destination port in UDP/TCP.
The forwarding engine will parse each layer
and swap it, and will stop when the next
layer doesn't match.
The mentioned headers of ICMP/ARP/Multicast
packets will be swapped as well according to
matching layers.
usage: --forward-mode=5tswap
Signed-off-by: Shiri Kuzin <shirik@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This commit adds testpmd capability to provide timestamps on the packets
being sent in the txonly mode. This includes:
- SEND_ON_TIMESTAMP support
new device Tx offload capability support added, example:
testpmd> port config 0 tx_offload send_on_timestamp on
- set txtimes, registers field and flag, example:
testpmd> set txtimes 1000000,0
This command enables the packet send scheduling on timestamps if
the first parameter is not zero, generic format:
testpmd> set txtimes (inter),(intra)
where:
inter - is the delay between the bursts in the device clock units.
If "intra" (next parameter) is zero, this is the time between the
beginnings of the first packets in the neighbour bursts, if "intra"
is not zero, "inter" specifies the time between the beginning of
the first packet of the current burst and the beginning of the last
packet of the previous burst. If "inter"parameter is zero the send
scheduling on timestamps is disabled (default).
intra - is the delay between the packets within the burst specified
in the device clock units. The number of packets in the burst is
defined by regular burst setting. If "intra" parameter is zero no
timestamps provided in the packets excepting the first one in the
burst.
As the result the bursts of packet will be transmitted with
specific delay between the packets within the burst and specific
delay between the bursts. The rte_eth_read_clock() is supposed to
be engaged to get the current device clock value and provide the
reference for the timestamps. If there is no supported
rte_eth_read_clock() there will be no provided send scheduling on
the device.
- show txtimes, displays the timing settings
- txonly burst time pattern
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
There is the requirement on some networks for precise traffic timing
management. The ability to send (and, generally speaking, receive)
the packets at the very precisely specified moment of time provides
the opportunity to support the connections with Time Division
Multiplexing using the contemporary general purpose NIC without involving
an auxiliary hardware. For example, the supporting of O-RAN Fronthaul
interface is one of the promising features for potentially usage of the
precise time management for the egress packets.
The main objective of this patchset is to specify the way how applications
can provide the moment of time at what the packet transmission must be
started and to describe in preliminary the supporting this feature
from mlx5 PMD side [1].
The new dynamic timestamp field is proposed, it provides some timing
information, the units and time references (initial phase) are not
explicitly defined but are maintained always the same for a given port.
Some devices allow to query rte_eth_read_clock() that will return
the current device timestamp. The dynamic timestamp flag tells whether
the field contains actual timestamp value. For the packets being sent
this value can be used by PMD to schedule packet sending.
The device clock is opaque entity, the units and frequency are
vendor specific and might depend on hardware capabilities and
configurations. If might (or not) be synchronized with real time
via PTP, might (or not) be synchronous with CPU clock (for example
if NIC and CPU share the same clock source there might be no
any drift between the NIC and CPU clocks), etc.
After PKT_RX_TIMESTAMP flag and fixed timestamp field supposed
deprecation and obsoleting, these dynamic flag and field might be
used to manage the timestamps on receiving datapath as well. Having
the dedicated flags for Rx/Tx timestamps allows applications not
to perform explicit flags reset on forwarding and not to promote
received timestamps to the transmitting datapath by default.
The static PKT_RX_TIMESTAMP is considered as candidate to become
the dynamic flag and this move should be discussed.
When PMD sees the "rte_dynfield_timestamp" set on the packet being sent
it tries to synchronize the time of packet appearing on the wire with
the specified packet timestamp. If the specified one is in the past it
should be ignored, if one is in the distant future it should be capped
with some reasonable value (in range of seconds). These specific cases
("too late" and "distant future") can be optionally reported via
device xstats to assist applications to detect the time-related
problems.
There is no any packet reordering according timestamps is supposed,
neither within packet burst, nor between packets, it is an entirely
application responsibility to generate packets and its timestamps
in desired order. The timestamps can be put only in the first packet
in the burst providing the entire burst scheduling.
PMD reports the ability to synchronize packet sending on timestamp
with new offload flag:
This is palliative and might be replaced with new eth_dev API
about reporting/managing the supported dynamic flags and its related
features. This API would break ABI compatibility and can't be introduced
at the moment, so is postponed to 20.11.
For testing purposes it is proposed to update testpmd "txonly"
forwarding mode routine. With this update testpmd application generates
the packets and sets the dynamic timestamps according to specified time
pattern if it sees the "rte_dynfield_timestamp" is registered.
The new testpmd command is proposed to configure sending pattern:
set tx_times <burst_gap>,<intra_gap>
<intra_gap> - the delay between the packets within the burst
specified in the device clock units. The number
of packets in the burst is defined by txburst parameter
<burst_gap> - the delay between the bursts in the device clock units
As the result the bursts of packet will be transmitted with specific
delays between the packets within the burst and specific delay between
the bursts. The rte_eth_read_clock is supposed to be engaged to get the
current device clock value and provide the reference for the timestamps.
[1] http://patches.dpdk.org/patch/73714/
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Softnic can be used like other virtual devices without
needing any special mode. Therefore, remove softnic mode
from testpmd app. Documentation is updated as well.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The APIs are marked in the doxygen comment but better to mark the
symbols too. This is planned for v20.11 release.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Flow manager API includes push/pop actions, so support corresponding
DPDK flow actions.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Add support for .get_reg eth_dev ops which will be used to collect the
firmware debug data.
PMD on detecting on some HW errors will collect the FW/HW Dump to a
buffer and then it will save it to a file implemented in
qede_save_fw_dump().
Dump file location and name:
Location: <RTE_SDK> or DPDK root
Name: qede_pmd_dump_mm-dd-yy_hh-mm-ss.bin
DPDK applications can initiate a debug data collection by invoking DPDK
library’s rte_eth_dev_get_reg_info() API. This API invokes .get_reg()
interface in the PMD.
PMD implementation of .get_reg() collects the FW/HW Dump, saves it to
data field of rte_dev_reg_info and passes it to the application. It’s
the responsibility of the application to save the FW/HW Dump to a file.
We recommendation using the file name format used by qede_save_fw_dump().
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Added support for set ipv4 address action items. It allows the source
or destination ip address to be changed for a given flow.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support for the vlan push and vlan pop actions
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add bnxt vector PMD support using NEON SIMD instructions.
Also update the 20.08 release notes with this information.
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Dynamic flow used instead of layout defined.
The actual key/mask size depends on protocols and(or) fields
of patterns specified.
Also, the key and mask should start from the beginning of IOVA.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Enable/disable link state interrupt and get link state api is
defined using IOCTL calls from kernel driver
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Minimize the number of different thread variables
Add all the thread specific variables in dpaa_portal
structure to optimize TLS Usage.
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
