mlx5 in Windows needs the software parsing hca capabilities
to query the NIC for TSO and Checksum offloading support.
Added the capability as part of the capabilities
queried by the PMD using DevX.
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Tested-by: Idan Hackmon <idanhac@nvidia.com>
Currently, the PMD decides if the software parsing
offload can enable outer IPv4 checksum and tunneled
TSO support by checking config->hw_csum and config->tso
respectively.
This is incorrect, the right way is to check the following
flags returned by the mlx5dv_query_device function:
MLX5DV_SW_PARSING - check general swp support.
MLX5DV_SW_PARSING_CSUM - check swp checksum support.
MLX5DV_SW_PARSING_LSO - check swp LSO/TSO support.
The fix enables the offloads according to the correct
flags returned by the kernel.
Fixes: e46821e9fc ("net/mlx5: separate generic tunnel TSO from the standard one")
Cc: stable@dpdk.org
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Tested-by: Idan Hackmon <idanhac@nvidia.com>
Add helper functions that allow one to check platform
ROC is running on. Platform type is retrieved from device
tree attribute runplatform which is updated by EBF accordingly.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Maximum interrupt number function used direct access to
structure field while ROC helper exists and serves the
same purpose.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
One sends commands and receive responses by enqueuing or dequeuing
custom messages. In order to simplify this scheme simple wrappers
were added which take care of all the heavy lifting.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
When the iavf_adapter instance is not initialized completely in the
primary process, the secondary process accesses its "rte_eth_dev"
member, it causes secondary process crash.
This patch replaces eth_dev with eth_dev_data in iavf_adapter.
Fixes: f978c1c9b3 ("net/iavf: add RSS hash parsing in AVX path")
Fixes: 9c9aa00403 ("net/iavf: add offload path for Rx AVX512 flex descriptor")
Fixes: 63660ea3ee ("net/iavf: add RSS hash parsing in SSE path")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds some defines related to DDP Track ID.
Signed-off-by: Artur Tyminski <arturx.tyminski@intel.com>
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Update FVL FW API version to 1.15
Signed-off-by: Maciej Paczkowski <maciej.paczkowski@intel.com>
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add raw format for i40e_32byte_rx_desc, right now this only be used
by kernel driver, the commit is just to sync with kernel driver.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add macros and structures for MAC frequency calculation in case the link
is not present.
Remove duplicate definition in i40e_ethdev.c
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The variable checksum from i40e_calc_nvm_checksum is used before return
value is checked. Fix this logic.
Fixes: 8db9e2a1b2 ("i40e: base driver")
Fixes: 3ed6c3246f ("i40e/base: handle AQ timeout when releasing NVM")
Cc: stable@dpdk.org
Signed-off-by: Christopher Pau <christopher.pau@intel.com>
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The status of i40e_read_nvm_word is not checked, so variables set
from this function could be used uninitialized. In this case, preserve
the existing flow that does not block initialization by initializing
these values from the start.
Fixes: 8d6c51fcd2 ("i40e/base: get OEM version")
Fixes: 2db7057424 ("net/i40e/base: limit PF/VF specific code to that driver only")
Cc: stable@dpdk.org
Signed-off-by: Christopher Pau <christopher.pau@intel.com>
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Fix mismatched function name in comments.
Fixes: 8db9e2a1b2 ("i40e: base driver")
Fixes: 842ea19963 ("i40e/base: save link module type")
Fixes: fd72a2284a ("i40e/base: support LED blinking with new PHY")
Fixes: 788fc17b2d ("i40e/base: support proxy config for X722")
Cc: stable@dpdk.org
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add flags for outer VLAN and include set port parameters.
Add flags, which describe port and switch state for both double VLAN
functionality and outer VLAN processing.
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
For Active Optical Cable (AOC) the correct media type is "Fibre",
not "Direct Attach Copper".
Fixes: d749d4d899 ("i40e/base: add AOC PHY types")
Fixes: aa153cc89f ("net/i40e/base: add new PHY types for 25G AOC and ACC")
Cc: stable@dpdk.org
Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com>
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The X722 card has 'Link Type' information elsewhere than the X710.
Previously, for all cards, the 'Link Type' information was retrieved by
opcode 0x0607 and this value was wrong for all X722 cards.
Now this information for X722 only is taken by opcode 0x0600
(function: i40e_aq_get_phy_capabilities) instead of an opcode
0x0607 (function: i40e_aq_get_link_info).
All other parameters read by opcode 0x0607 unchanged.
Fixes: e6691b428e ("i40e/base: fix PHY NVM interaction")
Fixes: 75c3de654e ("net/i40e/base: fix long link down notification time")
Cc: stable@dpdk.org
Signed-off-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com>
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
PF has to delete all the filters during reset.
If it is fully loaded with filters then it is possible that it will take
more than 200 ms to finish the reset resulting in timeout during pf_reset
and PF reset failed, -15 error indication.
Increasing the timeout value for PF reset from 200 to 1000 to give PF
more time to finish reset if it is loaded with filters.
Fixes: 1e32378f07 ("i40e/base: increase PF reset max loop limit")
Cc: stable@dpdk.org
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Unlike other supported adapters, 2.5G and 5G use different PHY type
identifiers for reading/writing PHY settings and for reading link status.
This commit introduces separate PHY identifiers for these two operation
types.
Fixes: 988ed63c74 ("net/i40e/base: add support for Carlsville device")
Cc: stable@dpdk.org
Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com>
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add definitions for Shadow RAM pointers: 6th FPA (Free Provisioning Area)
module, 5th FPA module in X722 and Preservation Rules module.
These definitions are not using by DPDK now, the purpose of this commit
is to sync base code with kernel driver.
Signed-off-by: Stanislaw Grzeszczak <stanislaw.a.grzeszczak@intel.com>
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Some customers want to downgrade to an earlier FW security revision, this
already implemented by FW so that customers can have more control over
the security revisions they can use. FW also implemented a mechanism via
NVMupdate to allow the users to accept or not a baseline Min SRev version
that will limit the secure version rollback only down to that level.
This commit increments X722 API version and adds new minimal rollback
revision that related to the extended implementation of Security Revision
Opt-In for 4 more X722 modules.
These definitions are not using by DPDK now, the purpose of this commit
is sync with latest share code.
Signed-off-by: Stanislaw Grzeszczak <stanislaw.a.grzeszczak@intel.com>
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
ASQ(Admin Send Queue) send command functions are returning only i40e
status codes yet some calling functions also need Admin Queue status that
is stored in hw->aq.asq_last_status. Since hw object is stored on a heap
it introduces a possibility for a race condition in access to hw if
calling function is not fast enough to read hw->aq.asq_last_status before
next send ASQ command is executed.
Added new versions of send ASQ command functions that return Admin Queue
status on the stack to avoid race conditions in access to
hw->aq.asq_last_status.
Added new _v2 version of i40e_aq_remove_macvlan and i40e_aq_add_macvlan
that is using new _v2 versions of ASQ send command functions and returns
the Admin Queue status on the stack.
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
On the vector implementation, during the tear-down, the mbufs not
drained in the RxQ and TxQ are freed based on an algorithm which
supposed that the number of descriptors is a power of 2 (max_desc).
Based on this hypothesis, this algorithm uses a bitmask in order to
detect an index overflow during the iteration, and to restart the loop
from 0.
However, there is no such power of 2 requirement in the ixgbe for the
number of descriptors in the RxQ / TxQ. The only requirement is to have
a number correctly aligned.
If a user requested to configure a number of descriptors which is not a
power of 2, as a consequence, during the tear-down, it was possible to
be in an infinite loop, and to never reach the exit loop condition.
By removing the bitmask and changing the loop method, we can avoid this
issue, and allow the user to configure a RxQ / TxQ which is not a power
of 2.
Fixes: c95584dc2b ("ixgbe: new vectorized functions for Rx/Tx")
Cc: stable@dpdk.org
Signed-off-by: Julien Meunier <julien.meunier@nokia.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Some packets are discarded by the NIC because they are larger than
the MTU, these packets should be counted as "RX error" instead of
"RX packet", for example:
pkt1 = Ether()/IP()/Raw('x' * 1400)
pkt2 = Ether()/IP()/Raw('x' * 1500)
---------------- Forward statistics for port 0 -----------------
RX-packets: 2 RX-dropped: 0 RX-total: 2
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------
Here the packet pkt2 has been discarded, but still was counted
by "RX-packets"
The register 'GL_RXERR1' can count above discarded packets.
This patch adds reading and calculation of the 'GL_RXERR1' counter
when reporting DPDK statistics.
Fixes: f4a91c38b4 ("i40e: add extended stats")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
If GTPU Extension header has no pdu_type setting, the parsed value of
gtp_psc_spec->hdr.type will be 0, which is same as IAVF_GTPU_EH_DWLINK.
Thus, for this case, we should check gtp_psc_mask->hdr.type instead,
to set QFI field bit of GTPU_EH first.
Fixes: cd212c4669 ("net/iavf: fix QFI fields of GTPU UL/DL for flow director")
Cc: stable@dpdk.org
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Indirect actions should be used to do shared counters.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The representor support has been implemented to some extent, and the fact
that ethdev mport is equivalent to entity mport is by design.
Fixes: 1fb65e4dae ("net/sfc: support flow action port ID in transfer rules")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Galaktionov <viacheslav.galaktionov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Let the driver provide the user with information about available
representors by implementing the representor_info_get operation.
Due to the lack of any structure to representor IDs, every ID range
describes exactly one representor.
Signed-off-by: Viacheslav Galaktionov <viacheslav.galaktionov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Representor IDs must be unique for each representor. VFs, which are
currently used, are not unique as they may repeat in combination with
different PCI controllers and PFs. On the other hand, switch port IDs
are unique, so they are a better fit for this role.
Signed-off-by: Viacheslav Galaktionov <viacheslav.galaktionov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Allow the user to specify representor entities using the structured
parameter values.
Signed-off-by: Viacheslav Galaktionov <viacheslav.galaktionov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Make representor names unique on multi-host configurations.
Signed-off-by: Viacheslav Galaktionov <viacheslav.galaktionov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
This information will be useful when representor info API is implemented.
Signed-off-by: Viacheslav Galaktionov <viacheslav.galaktionov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Newer hardware may have arbitrarily complex controller configurations,
and for this reason the mapping has been made dynamic: it is represented
with a dynamic array that is indexed by controller numbers and each
element contains an EFX interface number. Since the number of controllers
is expected to be small, this approach should not hurt the performance.
Signed-off-by: Viacheslav Galaktionov <viacheslav.galaktionov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Equality checks between VNICs should be done by comparing their client
handles. This means that clients should be able to retrieve client
handles for arbitrary functions and themselves.
Signed-off-by: Viacheslav Galaktionov <viacheslav.galaktionov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
This is required to provide the driver with the current state of mports.
Signed-off-by: Viacheslav Galaktionov <viacheslav.galaktionov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
This information is required to be able to fully identify the function.
Add this information to the NIC configuration structure for easy access.
Signed-off-by: Viacheslav Galaktionov <viacheslav.galaktionov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Provide helper function to compose multi-host aware PCIe
function M-port selector.
The firmware expects mport selectors to use different sets of values to
represent a PCIe interface in mport selectors and elsewhere. In order to
avoid having the user perform the conversion themselves, it is now done
automatically when a selector is constructed.
In addition, a type has been added to libefx for possible PCIe
interfaces.
This is done to abstract different representations away from the users.
Allow to support matching traffic coming from an arbitrary PCIe
end-point of the NIC and redirect traffic to it.
Signed-off-by: Viacheslav Galaktionov <viacheslav.galaktionov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
If for some reason the hardware switch ID initialization function fails,
MAE lock is still held after the function finishes. This patch fixes that.
Fixes: 1e7fbdf0ba ("net/sfc: support concept of switch domains/ports")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Galaktionov <viacheslav.galaktionov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Gather statistics of enqueued and dequeued packets in Rx and Tx burst
callbacks to report in stats_get callback.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Implement traffic forwarding for representor and representor proxy
from virtual functions to representor Rx queues.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Set ingress mport dynamic field in mbuf in EF100.
For a given PF, Rx queues of representor devices
function on top of the only Rx queue operated by
the PF representor proxy facility. This field is
a means to demultiplex traffic hitting the queue.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Layout of the EF100 Rx prefix is defined in terms of a 32 bytes long
value type (xword). Replace oword with xword to avoid truncation.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Forward traffic that is transmitted from a port representor to the
corresponding virtual function using the dedicated TxQ.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Support probing the device multiple times so that additional port
representors can be created with hotplug EAL API. To hotplug a
representor, the PF must be hotplugged with different representor
device argument.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Implement the callback by reporting link down if the representor
is not started, otherwise report link up with undefined link speed.
Link speed is undefined since representors can pass traffic to each
other even if the PF link is down.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Implement queue start and stop operation both in port
representors and representor proxy.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Implement Tx queue start and stop in port representor proxy.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Add extra libefx flags to Rx queue information initialization
function interface to be able to specify the ingress m-port
flag for a representor RxQ. Rx prefix of packets on that queue
will contain ingress m-port field required for packet forwarding
in representor proxy.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Implement queue creation and destruction both in port representors
and representor proxy.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
