The directory steam was not closed when the hugepage action was
HUGEPAGE_CHECK_EXISTS. This caused a memory leak in some parts of
the unit tests.
Fixes: 45f1b6e868 ("app: add new tests on eal flags")
Cc: stable@dpdk.org
Signed-off-by: Owen Hilyard <ohilyard@iol.unh.edu>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Fixes for a few memory leaks in the cmdline_autotest unit test.
All of the leaks were related to not freeing the commandline struct
after testing had completed.
Fixes: dbb860e03e ("cmdline: tests")
Cc: stable@dpdk.org
Signed-off-by: Owen Hilyard <ohilyard@iol.unh.edu>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
ASAN found a stack buffer overflow in lib/rib/rte_rib6.c:get_dir.
The fix for the stack buffer overflow was to make sure depth
was always < 128, since when depth = 128 it caused the index
into the ip address to be 16, which read off the end of the array.
While trying to solve the buffer overflow, I noticed that a few
changes could be made to remove the for loop entirely.
Fixes: f7e861e21c ("rib: support IPv6")
Cc: stable@dpdk.org
Signed-off-by: Owen Hilyard <ohilyard@iol.unh.edu>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Rules in a classify table were not freed if the table
had a delete function.
Fixes: be41ac2a33 ("flow_classify: introduce flow classify library")
Cc: stable@dpdk.org
Signed-off-by: Owen Hilyard <ohilyard@iol.unh.edu>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
When IOVA=VA, address translation for segmented packets is wrong, it
assumes the address in the mbuf->next is physical address, not VA
address.
Fixing the address translation to work both PA & VA mode.
Fixes: e73831dc6c ("kni: support userspace VA")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In kni_allocate_mbufs(), we alloc mbuf for alloc_q as this code.
allocq_free = (kni->alloc_q->read - kni->alloc_q->write - 1) \
& (MAX_MBUF_BURST_NUM - 1);
The value of allocq_free maybe zero, for example :
The ring size is 1024. After init, write = read = 0. Then we fill
kni->alloc_q to full. At this time, write = 1023, read = 0.
Then the kernel send 32 packets to userspace. At this time, write
= 1023, read = 32. And then the userspace receive this 32 packets.
Then fill the kni->alloc_q, (32 - 1023 - 1) & 31 = 0, fill nothing.
...
Then the kernel send 32 packets to userspace. At this time, write
= 1023, read = 992. And then the userspace receive this 32 packets.
Then fill the kni->alloc_q, (992 - 1023 - 1) & 31 = 0, fill nothing.
Then the kernel send 32 packets to userspace. The kni->alloc_q only
has 31 mbufs and will drop one packet.
Absolutely, this is a special scene. Normally, it will fill some
mbufs everytime, but may not enough for the kernel to use.
In this patch, we always keep the kni->alloc_q to full for the kernel
to use.
Fixes: 49da4e82cf ("kni: allocate no more mbuf than empty slots in queue")
Cc: stable@dpdk.org
Signed-off-by: Cheng Liu <liucheng11@huawei.com>
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch uses the new device config ops to get and set
the MAC address if supported.
If a valid MAC address is passed as devarg of the
Virtio-user PMD, the driver will try to store it in the
device config space. Otherwise the one provided in
the device config space will be used, if available.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
This patch introduces two virtio-user callbacks to get
and set device's config, and implements it for vDPA
backends.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
This patch is preliminary rework to add support for getting
and setting device's config space.
In order to get or set a device config such as its MAC address,
we need to know whether the device itself support the feature,
or if it is emulated by the frontend.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Same idea as commit a287ac2891 ("vhost: allocate and free packets
in bulk in Tx packed"), allocate and free packets in bulk.
Also remove the unused function virtio_dev_pktmbuf_alloc.
Signed-off-by: Balazs Nemeth <bnemeth@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Restore the original code, where VHOST_SET_FEATURES is applied to
all vhostfds of the device.
Fixes: cc0151b34d ("net/virtio: add virtio-user features ops")
Cc: stable@dpdk.org
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Use vc_req only after it was checked not to be NULL.
Fixes: 2d962bb736 ("vhost/crypto: fix possible TOCTOU attack")
Cc: stable@dpdk.org
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When having multiple working trees, the main one has a .git directory
while attached trees have a .git file.
Thus the git check should work for both file and directory.
In the case there is no working tree (.git not readable), the command
"find" is used and should be able to list paths with wildcards.
Wildcards work only as shell expansion in the case of file paths,
so the quotes must be removed.
Fixes: 27c2ce5632 ("maintainers: start a Linux-style file")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
If compiled with SVE feature (e.g. "-march=armv8.2-a+sve'), the binary
could not run on non-SVE platform else it will encounter illegal
instruction [1].
This patch fixes it by adding 'RTE_CPUFLAG_SVE' to compile_time_cpuflags,
so that rte_cpu_is_supported() will print meaningful log under above
situation.
[1] http://mails.dpdk.org/archives/dev/2021-May/209124.html
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Ruifeng Wang <ruifeng.wang@arm.com>
Interrupt manager in Windows EAL allocates on IOCP and starts
a control thread that runs indefinitely. At DPDK cleanup
this thread was not stopped and IOCP handle was not closed.
Gracefully stop interrupt-handling in rte_eal_cleanup().
The thread already closes IOCP handle before exiting.
Fixes: 5c016fc020 ("eal/windows: add interrupt thread skeleton")
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Jie Zhou <jizh@microsoft.com>
Tested-by: Jie Zhou <jizh@microsoft.com>
Each time a work was scheduled in the interrupt thread,
usually an alarm, a handle was opened but not closed.
Opening a handle is a system call, which harms alarm precision.
Instead of opening and closing a handle each time, open it
when interrupt thread starts and close it when the thread finishes.
Fixes: 5c016fc020 ("eal/windows: add interrupt thread skeleton")
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: Pallavi Kadam <pallavi.kadam@intel.com>
Interrupt thread ID retained its value after interrupt thread finish.
Other interrupt routines could then operate on the wrong thread.
Clear interrupt thread ID before thread termination.
Fixes: 5c016fc020 ("eal/windows: add interrupt thread skeleton")
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
In the event of a device reconfigure, "hdls_avail" is not being reset. This
can lead to miscalculations in rte_ioat_completed_ops(), causing the
function to report an incorrect amount of completed operations. This patch
fixes the issue by resetting "hdls_avail" during the device configure.
Fixes: 74464005a2 ("raw/ioat: rework SW ring layout")
Cc: stable@dpdk.org
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
During device configure, memory is allocated for "hdl_ring_flags". In the
event of another call to the device configure function (reconfigure), a
memory leak would occur. This patch fixes the memory leak by free'ing the
memory before reallocating it.
Fixes: 245efe544d ("raw/ioat: report status of completed jobs")
Cc: stable@dpdk.org
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Size of string constant symbol may be larger than its length
measured up to NUL terminator. In this case pmdinfogen included padding
bytes after NUL terminator in generated source, yielding incorrect code.
Always trim string data to NUL terminator while reading ELF.
It was already done for COFF because there's no symbol size.
Bugzilla ID: 720
Fixes: f0f93a7adf ("buildtools: use Python pmdinfogen")
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
This became visible by backporting the following for the 19.11 stable tree:
c13ca4e8 "vfio: fix DMA mapping granularity for IOVA as VA"
The usage of type bool in the vfio code would require "#include
<stdbool.h>", but rte_vfio.h has no direct paths to stdbool.h.
It happens that in eal_vfio_mp_sync.c it comes after "#include
<rte_log.h>".
And rte_log.h since 20.05 includes stdbool since this change:
241e67bfe "log: add API to check if a logtype can log in a given level"
and thereby mitigates the issue.
It should be safe to include stdbool.h from rte_vfio.h itself
to be present exactly when needed for the struct it defines using that
type.
Fixes: c13ca4e81c ("vfio: fix DMA mapping granularity for IOVA as VA")
Cc: stable@dpdk.org
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Default burst size in testpmd has been changed from 16 to 32
for some time now. But the documentation had not been updated.
Fixes: 836853d3d4 ("app/testpmd: increase default burst size to 32")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
A stray character got added. Remove it.
Fixes: cb056611a8 ("eal: rename lcore master and slave")
Cc: stable@dpdk.org
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Currently once a device is configured, the user does not have the ability
to reset the device via the script.
This patch adds a device reset option to the script. For example
"$dpdk_idxd_cfg.py 0 --reset" would reset device 0.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Currently the user needs to find the DSA instance number for any DSA device
they would like to configure using this script, which can be cumbersome and
error-prone since the instance numbering may change when changing the
binding of the devices between vfio-pci and idxd.
This patch improves the usability of the script by adding the ability to
specify the DSA device to configure using the device's PCI address instead
of the DSA instance number. For example, "$dpdk_idxd_cfg.py 0" and
"$dpdk_idxd_cfg.py 6a:01.0" are both valid references to the same device
(assuming the numbering).
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The device name is not being initialized during the idxd bus scan which
will cause segmentation faults when an appliation tries to access this
information.
This patch adds the required initialization of the device name so that it
can be read without issues.
Fixes: b7aaf417f9 ("raw/ioat: add bus driver for device scanning automatically")
Cc: stable@dpdk.org
Reported-by: Sunil Pai G <sunil.pai.g@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Sunil Pai G <sunil.pai.g@intel.com>
--buildtype=debug with gcc 6.3 produces the following error:
../lib/librte_acl/acl_run_avx512_common.h: In function
‘resolve_match_idx_avx512x16’:
../lib/librte_acl/acl_run_avx512x16.h:33:18: error:
the last argument must be an 8-bit immediate
^
../lib/librte_acl/acl_run_avx512_common.h:373:9: note:
in expansion of macro ‘_M_I_’
return _M_I_(slli_epi32)(mi, match_log);
^~~~~
Seems like gcc-6.3 complains about the following construct:
static const uint32_t match_log = 5;
...
_mm512_slli_epi32(mi, match_log);
It can't substitute constant variable 'match_log' with its actual value.
The fix replaces constant variable with its immediate value.
Bugzilla ID: 717
Fixes: b64c2295f7 ("acl: add 256-bit AVX512 classify method")
Fixes: 45da22e42e ("acl: add 512-bit AVX512 classify method")
Cc: stable@dpdk.org
Reported-by: Liang Ma <liangma@liangbit.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
IPv4 and IPv6 fragment ptypes are supposed to be separated from IP
other ptypes. New bitmaps for IP fragment ptypes were created, but the
IP fragment ptypes were not deleted from the previous non-frag bitmaps,
which will cause conflicts. This patch removes IP fragment ptypes from
the non-frag bitmaps.
Fixes: 8434528175 ("net/ice/base: support IP fragment RSS and FDIR")
Cc: stable@dpdk.org
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The new allocated mbuf should be updated to the SW
ring.
Fixes: a2b29a7733 ("net/avf: enable basic Rx Tx")
Fixes: b8b4c54ef9 ("net/iavf: support flexible Rx descriptor in normal path")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
The original code use a heap pointer after it is freed.
Fixes: 460d167958 ("drivers/net: delete HW rings while freeing queues")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When creating FDIR rule and parsing the pattern, if IPv4 fragment type is
detected, the flow type is not changed to ICE_FLTR_PTYPE_FRAG_IPV4 from
ICE_FLTR_PTYPE_NONF_IPV4_OTHER. It will cause profile confilict with
other FDIR rules for IPv4 other type.
Fixes: b7e8781de7 ("net/ice: support flow director for IP fragment packet")
Cc: stable@dpdk.org
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The rte_eth_devices array is not in share memory, it should not be
referenced by ice_adapter which is shared by primary and secondary.
Any process set ice_adapter->eth_dev will corrupt another process'
context.
The patch removed the field "eth_dev" from ice_adapter.
Now, when the data paths try to access the rte_eth_dev_data instance,
they should replace adapter->eth_dev->data with adapter->pf.dev_data.
Fixes: f9cf4f8641 ("net/ice: support device initialization")
Cc: stable@dpdk.org
Reported-by: Yixue Wang <yixue.wang@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Yixue Wang <yixue.wang@intel.com>
The flag use_avx2 and use_avx512 are defined as local variables, they
will not be aware by the secondary process, then wrong data path is
selected. Fix the issue by moving them into struct ice_adapter.
Fixes: ae60d3c9b2 ("net/ice: support Rx AVX2 vector")
Fixes: 2d5f6953d5 ("net/ice: support vector AVX2 in Tx")
Fixes: 7f85d5ebcf ("net/ice: add AVX512 vector path")
Cc: stable@dpdk.org
Reported-by: Yixue Wang <yixue.wang@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Yixue Wang <yixue.wang@intel.com>
remove the VSI info from previous aggregator after moving the VSI to a
new aggregator.
Signed-off-by: Victor Raj <victor.raj@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
ice_aq_set_pfc_mode is used to configure DSCP.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Performance improvement: use a write combining store
instead of a regular mmio write to update queue tail
registers.
Signed-off-by: Gordon Noonan <gordon.noonan@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When user configured the flow rule with raw packet via command
"flow_director_filter", it would reset all previous fdir input set
flags with "i40e_flow_set_fdir_inset()".
Ignore to configure the flow input set with raw packet rule used.
Fixes: ff04964ea6 ("net/i40e: fix flow director for common pctypes")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
In original implementation, device reconfiguration will generate
a new default RSS key if there is no one from user, it is unexpected
when updating a completely unrelated configuration.
This patch makes default RSS key unchanged, during the lifetime of the
DPDK application even if there are multiple reconfigurations.
Fixes: 50370662b7 ("net/ice: support device and queue ops")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
In max10_staging_area_init(), variable "start" from fdt_get_reg() may
be invalid, it should be checked before assigning to member variable
"staging_area_base" of structure "intel_max10_device".
Coverity issue: 367480, 367482
Fixes: a05bd1b40b ("raw/ifpga: add FPGA RSU APIs")
Cc: stable@dpdk.org
Signed-off-by: Wei Huang <wei.huang@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
The array rss_key has size 'vf->vf_res->rss_key_size', the array index
should be less than that.
Cc: stable@dpdk.org
Fixes: 69dd4c3d08 ("net/avf: enable queue and device")
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The existing log message is missing a space. Modified it to
a more meaningful log as part of this change.
Before this patch:
bnxt_dev_init(): bnxtfound at mem D67E0000, node addr 0x2101112000M
With this patch:
bnxt_dev_init(): Found bnxt device at mem D67E0000, node addr 0x2101112000M
Fixes: 1bf01f5135 ("net/bnxt: prevent device access when device is in reset")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
On Thor, driver must use HWRM to access the timestamp information.
Driver should not advertise PTP support to application
if PTP information is not available via HWRM commands.
Fixes: 6cbd89f9f3 ("net/bnxt: support PTP for Thor")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Use the function bnxt_vnic_destroy() to destroy VNIC resources
and thereby eliminate few duplicate code.
Fixes: 8d0a244b40 ("net/bnxt: cleanup VNIC after flow validate")
Fixes: 49d0709b25 ("net/bnxt: delete and flush L2 filters cleanly")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
During flow destroy, when bnxt_hwrm_tunnel_redirect_free() fails,
driver is not setting flow error using "rte_flow_error_set".
Fixes: 11e5e19695 ("net/bnxt: support redirecting tunnel packets to VF")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Resources should be freed on error conditions. i.e, VNIC and
VNIC context created in HW and memory allocated in
bnxt_vnic_grp_alloc() should be freed.
Added a new function bnxt_vnic_destroy() to do the cleanup.
This lightweight function can be used in flow destroy/flush
path to avoid duplicate code as well.
Fixes: d24610f7bf ("net/bnxt: allow flow creation when RSS is enabled")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
