Testpmd forwards packets in checksum mode that it needs to calculate
the checksum of each layer's protocol.
In process_inner_cksums, when parsing tunnel packets, inner L4 offset
should be outer_l2_len + outer_l3_len + l2_len + l3_len.
In process_outer_cksums, when parsing tunnel packets, outer L4 offset
should be outer_l2_len + outer_l3_len.
Fixes: e6b9d6411e ("app/testpmd: add SW L4 checksum in multi-segments")
Cc: stable@dpdk.org
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Yuying Zhang <yuying.zhang@intel.com>
Acked-by: Aman Singh <aman.deep.singh@intel.com>
Depending on number of jobs specified on command line, part of the
data buffer may not get searched, resulting in incorrect number of
matches being reported.
Additional change to ensure the "All Matches" summary outputs the
correct match start locations in the supplied data buffer.
Fixes: de06137cb2 ("app/regex: add RegEx test application")
Cc: stable@dpdk.org
Signed-off-by: Gerry Gribbon <ggribbon@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Currently dumpcap tries to initialize dpdk before parsing command line
arguments, this makes it impossible to check version or help without
having the primary process running already.
Signed-off-by: Ben Magistro <koncept1@gmail.com>
If the rte_eth_promiscuous_enable() fails, then log the error
and continue.
Coverity issue: 373662
Fixes: cbb44143be ("app/dumpcap: add new packet capture application")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
If conversion of cBPF to eBPF fails (in rte_bpf_convert)
then the test should not try and print the result.
Coverity issue: 373661
Fixes: 2eccf6afbe ("bpf: add function to convert classic BPF to DPDK BPF")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The mempool should be free when cleanup resources.
Signed-off-by: Tianli Lai <laitianli@tom.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Check lcore id value is not the maximum core supported.
Using lcore id without this check might cause
out of bound access inside the rte_eal_wait_lcore.
Coverity issue: 375841
Fixes: b2854d5317 ("app/pdump: support multi-core capture")
Cc: stable@dpdk.org
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The node clone API parameter 'name' is the new node's postfix name, not
the final node name, so it makes no sense to check it. And the new name
will be checked duplicate when calling API '__rte_node_register'.
And update the test case to call clone API twice to check the real name
duplicate.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
A pattern template creation shares the parsing mechanism with
a simple flow creation. The pattern template creation only consists
of pattern items while the flow creation continues with actions.
The parsing mechanism now accommodates both cases and allows to stop
at the item end token, which should not happen for the flow creation.
Fix parsing mechanism to differentiate between these two cases.
Bugzilla ID: 941
Fixes: 04cc665fab ("app/testpmd: add flow template management")
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Tested-by: Zhimin Huang <zhiminx.huang@intel.com>
Ops population functions are called in datapath. Keeping it common for
PDCP & DOCSIS would mean ops population would have additional
conditional checks causing the throughput reported to be lower than what
the PMD is capable of.
Separate out routine for IPsec cases and split vector population and op
preparation into two loops to allow 2 rte_rdtsc_precise() calls to
capture cycles consumed for memcpying the vector. Checking the cycle
count from the loop would mean more calls to the same API.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The number of QPs is limited by the number of cores, such that in
case the user requests more QPs than possible, the number of QPs
actually configured on the device is equal to the number of cores,
but the app tries to setup the original number of QPs.
Align the number of QPs setup'ed to the limited number.
Fixes: 424dd6c8c1 ("app/compress-perf: add weak functions for multicore test")
Cc: stable@dpdk.org
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Socket ID is obtained by function rte_compressdev_socket_id, which
returns it as integer, but is interpreted as unsigned byte integer.
change type from uint8_t to int.
Fixes: ed7dd94f7f ("compressdev: add basic device management")
Cc: stable@dpdk.org
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
An array of the size of total operations needed for the de/compression is
reserved for ops while enqueueing, although only first burst_size entries
of the array are used.
Reduce the size of the array allocated.
Fixes: b68a82425d ("app/compress-perf: add performance measurement")
Cc: stable@dpdk.org
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
In cyclecount main_loop function, each iteration it tries to
enqueue X ops, in case Y<X ops were enqueued, the rest of the
X-Y ops are moved to the beginning of the ops array, to preserve
ops order, and next Y ops are allocated for the next enqueue
action, the allocation of the ops occurs on the first Y entries
in the array, when it should have skipped the first X-Y
array entries and allocate the following Y entries.
Fix the allocation by adding the correct offset.
Fixes: 2695db95a1 ("test/compress: add cycle-count mode to perf tool")
Cc: stable@dpdk.org
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Constant value 1 has a size of 32 bits, and shifting it more than 32 bits
to the left overflows. 1ULL is needed to be able to get a 64-bit value.
Coverity ID: 375846
Fixes: 8751a7e983 ("efd: allow more CPU sockets in table creation")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Yipeng Wang <yipeng1.wang@intel.com>
When ixgbe and bnxt are disabled, compilation was failing:
app/test-pmd/cmdline.c:9396:11: error:
variable 'vf_rxmode' set but not used
Fixes: 4cfe399f65 ("net/bnxt: support to set VF rxmode")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The structure "rte_flow_item_geneve_opt" is not a protocol header of
geneve tunnel option from rfc8926. The field "data" is a pointer
which points to the actual variable-length option data. So the
structure is not packed.
There is 4 bytes hole before the pointer in a 64-bit system. The
option header is just 4 bytes. When using offsetof() to get the
fixed part's size of option header, the wrong value 8 was got. When
constructing the encap header, a wrong size and offset was used due
to this hole.
With this commit, the fixed part's size is calculated explicitly
based on all fields.
Fixes: 55c074f3ba ("app/testpmd: support GENEVE option item")
Cc: stable@dpdk.org
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Reviewed-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Add testpmd support for the rte_flow_async_action_handle API.
Provide the command line interface for operations dequeue.
Usage example:
flow queue 0 indirect_action 0 create action_id 9
ingress postpone yes action rss / end
flow queue 0 indirect_action 0 update action_id 9
action queue index 0 / end
flow queue 0 indirect_action 0 destroy action_id 9
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Add testpmd support for the rte_flow_pull API.
Provide the command line interface for pulling operations results.
Usage example: flow pull 0 queue 0
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Add testpmd support for the rte_flow_push API.
Provide the command line interface for pushing operations.
Usage example: flow queue 0 push 0
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Add testpmd support for the rte_flow_q_create/rte_flow_q_destroy API.
Provide the command line interface for enqueueing flow
creation/destruction operations. Usage example:
testpmd> flow queue 0 create 0 postpone no
template_table 6 pattern_template 0 actions_template 0
pattern eth dst is 00:16:3e:31:15:c3 / end actions drop / end
testpmd> flow queue 0 destroy 0 postpone yes rule 0
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Add testpmd support for the rte_flow_table API.
Provide the command line interface for the flow
table creation/destruction. Usage example:
testpmd> flow template_table 0 create table_id 6
group 9 priority 4 ingress mode 1
rules_number 64 pattern_template 2 actions_template 4
testpmd> flow template_table 0 destroy table 6
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Add testpmd support for the rte_flow_pattern_template and
rte_flow_actions_template APIs. Provide the command line interface
for the template creation/destruction. Usage example:
testpmd> flow pattern_template 0 create pattern_template_id 2
template eth dst is 00:16:3e:31:15:c3 / end
testpmd> flow actions_template 0 create actions_template_id 4
template drop / end mask drop / end
testpmd> flow actions_template 0 destroy actions_template 4
testpmd> flow pattern_template 0 destroy pattern_template 2
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Add testpmd support for the rte_flow_configure API.
Provide the command line interface for the Flow management.
Usage example: flow configure 0 queues_number 8 queues_size 256
Implement rte_flow_info_get API to get available resources:
Usage example: flow info 0
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
The csum FWD mode parses any received packet to set mbuf offloads for
the transmitting burst, mainly in the checksum/TSO areas.
In the case of a tunnel header, the csum FWD tries to detect known
tunnels by the standard definition using the header's data and fallback
to check the packet type in the mbuf to see if the Rx port driver
already sign the packet as a tunnel.
In the fallback case, the csum assumes the tunnel is VXLAN and parses
the tunnel as VXLAN.
When the GENEVE tunnel was added to the known tunnels in csum, its
parsing trial was wrongly located after the pkt type detection, causing
the csum to parse the GENEVE header as VXLAN when the Rx port set the
tunnel packet type.
Remove the fall back case to VXLAN.
Log error of unrecognized tunnel if no tunnel was parsed successfully.
Fixes: c10a026c3b ("app/testpmd: introduce vxlan parsing function in csum fwd engine")
Cc: stable@dpdk.org
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Aman Singh <aman.deep.singh@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
In bond, start or stop slave port should be operated by bonding port.
This patch add port_is_bonding_slave in start_port function.
Fixes: 0e545d3047 ("app/testpmd: check stopping port is not in bonding")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
If a initial process for the bonding device is like:
rte_eth_dev_configure
rte_eth_dev_set_mtu
queue setup and start, etc.
Pass the vdev args to application, and init bonding device only.
-a 0000:af:00.0 --vdev="net_bonding0,mode=2,slave=0000:af:00.0"
It will fail and complain for the slave device
"Port 0 must be configured before MTU set"
Test can be reproduced with ovs.
Fixes: b26bee10ee ("ethdev: forbid MTU set before device configure")
Cc: stable@dpdk.org
Signed-off-by: Junjie Wan <wanjunjie@bytedance.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Min Hu (Connor) <humin29@huawei.com>
Added test case to verify L4 checksum offload in IPsec transport mode.
Signed-off-by: Volodymyr Fialko <vfialko@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Add test cases to verify TTL and hop limit decrement with lookaside
IPsec offload.
Signed-off-by: Volodymyr Fialko <vfialko@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
This patch fixes misspelled RTE_RSA_KEY_TYPE_QT,
this will prevent checkpach from complaining wherever
change to RSA is being made.
Fixes: 26008aaed1 ("cryptodev: add asymmetric xform and op definitions")
Cc: stable@dpdk.org
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add test cases to verify copy and set DSCP with
IPv4 and IPv6 tunnels.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
In crypto producer mode, producer core enqueues cryptodev with software
generated crypto ops and worker core dequeues crypto completion events
from the eventdev. Event crypto metadata used for above processing is
pre-populated in each crypto session.
Parameter --prod_type_cryptodev can be used to enable crypto producer
mode. Parameter --crypto_adptr_mode can be set to select the crypto
adapter mode, 0 for OP_NEW and 1 for OP_FORWARD.
This mode can be used to measure the performance of crypto adapter.
Example:
./dpdk-test-eventdev -l 0-2 -w <EVENTDEV> -w <CRYPTODEV> -- \
--prod_type_cryptodev --crypto_adptr_mode 1 --test=perf_atq \
--stlist=a --wlcores 1 --plcores 2
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
For some DMA HW devices, e.g. those using the idxd driver, the maximum
burst size is configurable, which can lead to test failures if the value
is set too small. Add explicit check for this to give reasonable error
messages for devices which need their config adjusted.
Fixes: 1b86a66a30 ("test/dma: add more comprehensive copy tests")
Fixes: 8fa5d26839 ("test/dma: add burst capacity test")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
rte_gpu_mem_cpu_map() exposes a GPU memory area to the CPU.
In gpudev communication list this is useful to store the
status flag.
A communication list status flag allocated on GPU memory
and mapped for CPU visibility can be updated by CPU and polled
by a GPU workload.
The polling operation is more frequent than the CPU update operation.
Having the status flag in GPU memory reduces the GPU workload polling
latency.
If CPU mapping feature is not enabled, status flag resides in
CPU memory registered so it's visible from the GPU.
To facilitate the interaction with the status flag, this patch
provides also the set/get functions for it.
Signed-off-by: Elena Agostini <eagostini@nvidia.com>
Update rte_gpu_mem_cpu_unmap() header documentation
and the test application to use GPU pointer when unmapping.
Signed-off-by: Elena Agostini <eagostini@nvidia.com>
Rather than the asym session create function returning a session on
success, and a NULL value on error, it is modified to now return int
values - 0 on success or -EINVAL/-ENOTSUP/-ENOMEM on failure.
The session to be used is passed as input.
This adds clarity on the failure of the create function, which enables
treating the -ENOTSUP return as TEST_SKIPPED in test apps.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
A user data field is added to the asymmetric session structure.
Relevant API added to get/set the field.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The rte_cryptodev_asym_session structure is now moved to an internal
header. This will no longer be used directly by apps,
private session data can be accessed via get API.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Rather than using a session buffer that contains pointers to private
session data elsewhere, have a single session buffer.
This session is created for a driver ID, and the mempool element
contains space for the max session private data needed for any driver.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The programmer's guide for cryptodev included sample code for using
Asymmetric crypto. This is now replaced with direct code from the test
application, using literal includes. It is broken into snippets as the
test application didn't have all of the required code in one function.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Fix out of place scatter gather list in sym raw datapath unit test.
Fixes: cd8166c28c ("test/crypto: add raw API test for dpaax")
Cc: stable@dpdk.org
Signed-off-by: Kai Ji <kai.ji@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add gre_option command for matching optional fields
(checksum/key/sequence) in GRE header. The item must follow gre item,
and the item does not change the flags in gre item, the application
should set the flags in gre item correspondingly.
Application can still use gre_key item 'gre_key value is xx' for key
matching, the effect is the same with using 'gre_option key is xx'.
The examples for gre_option are as follows:
To match on checksum field with value 0x11:
testpmd> ... pattern / eth / gre c_bit is 1 / gre_option checksum is
0x11 / end ..
To match on checksum field with value 0x11 and any value of key:
testpmd> ... pattern / eth / gre c_bit is 1 k_bit is 1 / gre_option
checksum is 0x11 / end ..
To match on checksum field with value 0x11 and no key field in packet:
testpmd> ... pattern / eth / gre c_bit is 1 k_bit is 0 / gre_option
checksum is 0x11 / end ..
The invalid patterns for gre_option are as follows:
testpmd> ... pattern / eth / gre / gre_option checksum is 0x11 / end ..
(c_bit in gre item not present)
testpmd> ... pattern / eth / gre c_bit is 0 / gre_option checksum is 0x11 /
end .. (c_bit is unset for gre item, but checksum is
specified by gre_option item)
Signed-off-by: Sean Zhang <xiazhang@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
This patch adds L2TPv2 control message and 5 types of data message
support for testpmd.
The added L2TPv2 message types are listed below:
1. L2TPv2 control
2. L2TPv2
3. L2TPv2 + length option
4. L2TPv2 + sequence option
5. L2TPv2 + offset option
6. L2TPv2 + length option + sequence option
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Acked-by: Ori Kam <orika@nvidia.com>
This patch defines new RSS offload type for L2TPv2, which
is required when users want to distribute packets based on
the L2TPv2 session ID field.
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Functions like free, rte_free, and rte_mempool_free
already handle NULL pointer so the checks here are not necessary.
Remove redundant NULL pointer checks before free functions
found by nullfree.cocci
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When allocating a mbuf, its data content is most of the time zero'd but
nothing ensures this. This is especially wrong when building with
RTE_MALLOC_DEBUG, where data is poisoned to 0x6b on free.
This test reserves MBUF_TEST_DATA_LEN2 bytes in the mbuf data segment,
and sets this data to 0xcc.
Calling strlen(), the test may try to read more than MBUF_TEST_DATA_LEN2
which has been noticed when memory had been poisoned.
The mbuf data content is checked right after, so we can simply remove
strlen().
Fixes: 7b295dceea ("test/mbuf: add unit test cases")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This patch fixes the division by 0, which occurs if the number of
routes is less than 10.
Can be triggered by passing -n argument with value < 10:
./dpdk-test-fib -- -n 9
...
Floating point exception (core dumped)
Fixes: 103809d032 ("app/test-fib: add test application for FIB")
Cc: stable@dpdk.org
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Enable the possibility to expose a GPU memory area and make it
accessible from the CPU.
GPU memory has to be allocated via rte_gpu_mem_alloc().
This patch allows the gpudev library to map (and unmap),
through the GPU driver, a chunk of GPU memory and to return
a memory pointer usable by the CPU to access the GPU memory area.
Signed-off-by: Elena Agostini <eagostini@nvidia.com>
Patch adds command line options to configure queue based
priority flow control.
- Syntax command is given as below:
set pfc_queue_ctrl <port_id> rx <on|off> <tx_qid> <tx_tc> \
tx <on|off> <rx_qid> <rx_tc> <pause_time>
- Example command to configure queue based priority flow control
on rx and tx side for port 0, Rx queue 0, Tx queue 0 with pause
time 2047
testpmd> set pfc_queue_ctrl 0 rx on 0 0 tx on 0 0 2047
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Csum forwarding mode only supports software UDP/TCP csum calculation
for single segment packets when hardware offload is not enabled.
This patch enables software UDP/TCP csum calculation over multiple
segments.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Tested-by: Sunil Pai G <sunil.pai.g@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch enables method to provide key and mask for raw rules
to be provided as hexadecimal values. There is new parameter
pattern_mask added to support this.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
When the size of EEPROM exceeds the default thread stack size(8MB),
e.g.: 10MB size, it will crash due to stack overflow.
Allocate the data of EPPROM information on the heap.
Fixes: 6b67721dee ("app/testpmd: add EEPROM command")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Acked-by: Aman Singh <aman.deep.singh@intel.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
when start testpmd, and type command like this, it will lead to
Segmentation fault, like:
testpmd> create bonded device 4 0
testpmd> add bonding slave 0 2
testpmd> add bonding slave 1 2
testpmd> port start 2
testpmd> set bonding mode 0 2
testpmd> quit
Stopping port 0...
Stopping ports...
...
Bye...
Segmentation fault
The reason to the bug is that rte timer do not be cancelled when quit.
That is, in 'bond_ethdev_start', resources are allocated according to
different bonding mode. In 'bond_ethdev_stop', resources are free by
the corresponding mode.
For example, 'bond_ethdev_start' start bond_mode_8023ad_ext_periodic_cb
timer for bonding mode 4. and 'bond_ethdev_stop' cancel the timer only
when the current bonding mode is 4. If the bonding mode is changed,
and directly quit the process, the timer will still on, and freed memory
will be accessed, then segmentation fault.
'bonding mode' changed means resources changed, reallocate resources for
different mode should be done, that is, device should be restarted.
Fixes: 2950a76931 ("bond: testpmd support")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Expose Linux EAL ability to reuse existing hugepage files
via --huge-unlink=never switch.
Default behavior is unchanged, it can also be specified
using --huge-unlink=existing for consistency.
Old --huge-unlink switch is kept,
it is an alias for --huge-unlink=always.
Add a test case for the --huge-unlink=never mode.
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Memory allocator performance is crucial to applications that deal
with large amount of memory or allocate frequently. DPDK allocator
performance is affected by EAL options, API used and, at least,
allocation size. New autotest is intended to be run with different
EAL options. It measures performance with a range of sizes
for dirrerent APIs: rte_malloc, rte_zmalloc, and rte_memzone_reserve.
Work distribution between allocation and deallocation depends on EAL
options. The test prints both times and total time to ease comparison.
Memory can be filled with zeroes at different points of allocation path,
but it always takes considerable fraction of overall timing. This is why
the test measures filling speed and prints how long clearing takes
for each size as a reference (for rte_memzone_reserve estimations
are printed).
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Reviewed-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Enable a subset of unit tests for Windows CI
- For driver tests, driver owners should enable corresponding tests when
enabling driver for Windows.
- For dump tests, currently the tests hang on Windows which require
further investigation.
- For telemetry tests, it has POSIX socket specific codes which require
replacement for Windows. Will investigate and work on a separate patch.
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
- Add python script to check if system supports hugepages
- Remove corresponding .sh script
- Replace calling of .sh with corresponding .py in meson.build
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Skip tests which are not yet supported for Windows:
- The libraries that tests depend on are not enabled on Windows yet
- The tests can compile but with issue still under investigation
* test_func_reentrancy:
Windows EAL has no protection against repeated calls.
* test_lcores:
Execution enters an infinite loops, requires investigation.
* test_rcu_qsbr_perf:
Execution hangs on Windows, requires investigation.
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Add prefix to resolve name collision on Windows.
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Remove two alarm_autotest test cases which do bogus range check
on Windows.
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
On Windows, strerror returns just "Unknown error" for errnum greater
than MAX_ERRNO, while linux and freebsd returns "Unknown error <num>",
which is the current expectation for errno_autotest. Differentiate
the error string on Windows to remove a "duplicate error code" failure.
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
DPDK logs_autotest on Windows failed at "dynamic log types" tests.
The failures are on 2 test cases for rte_log_set_level_regexp API,
due to regular expression is not supported on Windows in DPDK yet
and regcomp/regexec are just stubs on Windows (in regex.h).
In app/test/test_logs.c, ifndef these two test cases, and for the
rte_log_set_level_pattern validation case following these two cases,
differentiate the expected log level passed into macro CHECK_LEVELS
Now logs_autotest completes for all dynamic log types and static log types.
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Even though test_interrupts.c can compile on Windows, skip interrupt
tests for now since majority of eal_interrupt on Windows are stubs.
Will remove the skip after interrupt being fully enabled on Windows.
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
- Replace POSIX-specific code with DPDK equivalents or
conditionally disable it on Windows
- Use NUL on Windows as /dev/null for Unix
- Exclude tests not supported on Windows yet
* multi-process
* PMD performance statistics display on signal
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
"What gets measured gets done."
This patch adds mempool performance tests where the number of objects to
put and get is constant at compile time, which may significantly improve
the performance of these functions. [*]
Also, it is ensured that the array holding the object used for testing
is cache line aligned, for maximum performance.
And finally, the following entries are added to the list of tests:
- Number of kept objects: 512
- Number of objects to get and to put: The number of pointers fitting
into a cache line, i.e. 8 or 16
[*] Some example performance test (with cache) results:
get_bulk=4 put_bulk=4 keep=128 constant_n=false rate_persec=280480972
get_bulk=4 put_bulk=4 keep=128 constant_n=true rate_persec=622159462
get_bulk=8 put_bulk=8 keep=128 constant_n=false rate_persec=477967155
get_bulk=8 put_bulk=8 keep=128 constant_n=true rate_persec=917582643
get_bulk=32 put_bulk=32 keep=32 constant_n=false rate_persec=871248691
get_bulk=32 put_bulk=32 keep=32 constant_n=true rate_persec=1134021836
Signed-off-by: Morten Brørup <mb@smartsharesystems.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Meson 0.61.1 is giving warnings that the calls to run_command do not
always explicitly specify if the result is to be checked or not, i.e.
there is a missing "check" parameter. This is because the default
behaviour without the parameter is due to change in the future.
We can fix these warnings by explicitly adding into each call whether
the result should be checked by meson or not. This patch therefore
adds in "check: false" to each run_command call where the result is
being checked by the DPDK meson.build code afterwards, and adds in
"check: true" to any calls where the result is currently unchecked.
Bugzilla ID: 921
Cc: stable@dpdk.org
Reported-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
External pinned buffer memory (--mp-alloc=xbuf)
was allocated as multiple IOVA-contiguous memzones
of 2M size and 2M alignment.
Due to the malloc overhead and the alignment requirement,
each 2M memzone consumed 4M of hugepage memory:
2M of usable memory + X of malloc overhead + (2M-X) padding.
The allocation often failed with 2M hugepages and IOVA-as-PA
if a PA-contiguous span of 2 hugepages could not be found.
Also, with any hugepage size and IOVA mode
memory consumption was almost 2x of the usable amount.
Alignment requirement of 2M for external buffers is redundant.
It was an attempt to ensure IOVA-contiguity
by forcing memzones to start at hugepage boundaries,
while 2M size intended to leave no unused space on the page.
As shown above, this in fact caused excessive memory consumption
and decreased the chance of a successful allocation.
RTE_MEMZONE_F_IOVA_CONTIG already ensures IOVA-contiguity.
Remove the alignment requirement.
Reduce the memzone size by the malloc overhead size (4 cache lines),
so that memory consumption for each memzone is
(2M-X) of usable memory + X of malloc overhead = 2M.
This also means that whenever there are free 2M hugepages,
an IOVA-contiguous memzone can always be allocated.
Fixes: 72512e1897 ("app/testpmd: add mempool with external data buffers")
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Assign 'left' variable only after null check on 'size'
as function returns if 'size' is null.
Coverity issue: 374381
Fixes: 169a9fed1f ("app/testpmd: fix hex string parser support for flow API")
Cc: stable@dpdk.org
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The first "set txtimes" command parameter specifies the time
interval between scheduled send bursts for single queue. This
interval should be the same for all the forwarding ports.
It requires to maintain the timing related variables on per
queue basis instead of per core, as currently implemented.
This resulted in wrong burst intervals if two or more cores
were generating the scheduled traffic for two or more ports
in txonly mode.
This patch moves the timing variable to the fstream structure.
Only txonly forwarding mode with enabled send scheduling is
affected.
Fixes: 4940344dab ("app/testpmd: add Tx scheduling command")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add test cases to verify copy DF and set DF options
with lookaside IPsec offload.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add known vector test cases for NULL cipher + AES-XCBC.
Also add both algos to the combined mode list of algos.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Skipping NULL authentication in ICV corruption test case
for lookaside IPsec testsuite.
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add fragmented plain packet test case in combined mode.
The test case leverages combined mode framework to generate
IPsec packet from a fragment and verify that headers are formed
correctly. The IPsec packet would be decapsulated and the plain
packet is compared against the original packet.
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add IPsec AES-CTR test case for combined mode
in lookaside IPsec testsuite.
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Added IPsec transport mode test cases for IPv4 packets
in the test app.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Added fragmented plain packet known vector test case in
IPsec outbound. The test case sends a fragmented packet
and ensures that the IPsec packet generated has correct
fragmentation fields (ie, the IPsec packet is not fragmented)
by comparing against the known vector.
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Test app is updated with lookaside IPsec HMAC-SHA384/512
known vectors test cases.
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Added IPv6 known vector and combined mode tests.
Following modes are added:
Tunnel IPv6 in IPv6
Tunnel IPv4 in IPv4
Tunnel IPv4 in IPv6
Tunnel IPv6 in IPv4
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Test app for lookaside IPsec is added with
AES-CBC-HMAC-SHA256 test cases.
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Extend IPsec lookaside test framework to support chained
operations and add AES-CBC 128 known vector tests.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add port, table and pipeline libraries - collectively often known as
the "packet framework" - to the list of optional libraries, and
ensure tests can build with them disabled.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Add the flow_classify library to the list of optional libraries, and
ensure tests can build with it disabled.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Rather than maintaining a list of the libraries the unit tests need, and
having to conditionally include/omit optional libs from the list, we can
just link against all available libraries, simplifying the code
considerably.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Similarly to rte_malloc, rte_gpu_mem_alloc accepts as
input the memory alignment size.
GPU driver should return GPU memory address aligned
with the input value.
Signed-off-by: Elena Agostini <eagostini@nvidia.com>
To ensure we catch any bugs in calculation due to wrap-around of the id
values, increase the number of iterations of the burst_capacity test.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Kevin Laatz <kevin.laatz@intel.com>
As per the deprecation notice, In the view of enabling unified driver
for octeontx2(cn9k)/octeontx3(cn10k), removing drivers/octeontx2
drivers and replace with drivers/cnxk/ which
supports both octeontx2(cn9k) and octeontx3(cn10k) SoCs.
This patch does the following
- Replace drivers/common/octeontx2/ with drivers/common/cnxk/
- Replace drivers/mempool/octeontx2/ with drivers/mempool/cnxk/
- Replace drivers/net/octeontx2/ with drivers/net/cnxk/
- Replace drivers/event/octeontx2/ with drivers/event/cnxk/
- Replace drivers/crypto/octeontx2/ with drivers/crypto/cnxk/
- Rename config/arm/arm64_octeontx2_linux_gcc as
config/arm/arm64_cn9k_linux_gcc
- Update the documentation and MAINTAINERS to reflect the same.
- Change the reference to OCTEONTX2 as OCTEON 9. Old release notes and
the kernel related documentation is not accounted for this change.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Ruifeng Wang <ruifeng.wang@arm.com>
Remove all memory leaks in case of errors in
test-gpudev application.
Fixes: e818c4e2bf ("gpudev: add memory API")
Fixes: c7ebd65c13 ("gpudev: add communication list")
Signed-off-by: Elena Agostini <eagostini@nvidia.com>
Removing the use of driver following PMD as its unnecessary.
Cc: stable@dpdk.org
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Signed-off-by: Conor Fogarty <conor.fogarty@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Remove the use of double "the" as it does not make sense.
Cc: stable@dpdk.org
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Signed-off-by: Conor Fogarty <conor.fogarty@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Current hex string parser assumes input has even characters number.
The parser fails input string with odd length.
The patch parses hex strings with even and odd length.
Parse result of an input with odd length will match result of
even length input, that has `0` as MSB, following by the original
sequence.
For example:
"0x1" results in *dst={0x01, 0x00}, *size=1
"0xabc" results in *dst={0x0a, 0xbc, 0x00}, *size=2
Fixes: 169a9fed1f ("app/testpmd: fix hex string parser support for flow API")
Cc: stable@dpdk.org
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Reviewed-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Device iterator RTE_DEV_FOREACH() failed to return devices from
classifier like "class=vdpa", because matching name from empty kvargs
returns no result. If device name not specified in kvargs, the function
should iterate all devices.
This patch allows empty devargs or devargs without name specified.
Fixes: 6aebb94290 ("kvargs: add function to get from key and value")
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Xueming Li <xuemingl@nvidia.com>
Application calculates segment size based on buffer size plus
digest size only, But if the operation mode is IPsec then
packet length can be increased by some more bytes depending on
the algorithm.
In this patch, increasing segment size with RTE_PKTMBUF_HEADROOM
when there is no user given segment size.
Fixes: 28dde5da50 ("app/crypto-perf: support lookaside IPsec")
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Tunnel offload API allows application to restore packet to
its original form if chain of flows missed after DECAP action.
The main idea of the tunnel offload API was to query port PMD
to provide flow elements - actions or items.
Flow elements supplied by PMD are merged with original flow rule
elements provided by testpmd operator to create a new flow rule,
optimal for PMD, to implement the tunnel offload API.
That flow rule transformation is hidden form testpmd operator and uses
internal testpmd resources.
Current testpmd did not release tunnel offload resources if flow rule
validation failed.
The patch always releases tunnel offload resources after flow rule
validation returns.
Fixes: 1b9f274623 ("app/testpmd: add commands for tunnel offload")
Cc: stable@dpdk.org
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Reviewed-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Aman Singh <aman.deep.singh@intel.com>
The current approach detects the proxy port on each port (re-)plug and
may spam the log with error messages if the PMD does not support flows.
As testpmd is a debug tool, it must not do such implicit port handling.
Instead, the new API should be called only when the user requests that.
Revoke the existing code. Implement an explicit command-line primitive
to let the user find the proxy port themselves. Provide relevant hints.
Fixes: 1179f05cc9 ("ethdev: query proxy port to manage transfer flows")
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Current implementation for raw encap sets the length to be in bytes,
but, GTP 'extension' header length is an 8-bit field in 4-octet units.
This fixes the length calculation of the header length.
Fixes: 9213c50e36 ("app/testpmd: support GTP PSC option in raw sets")
Cc: stable@dpdk.org
Signed-off-by: Raslan Darawsheh <rasland@nvidia.com>
Reviewed-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
This library can be made optional.
dumpcap and pdump applications depend on this library, check for
dependencies like what we have for examples.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
metrics, bitratestats, jobstats and latencystats libraries can be made
optional as they provide standalone features.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
GRO and GSO integration in testpmd is relatively self contained and easy
to extract.
Those libraries can be made optional as they provide standalone
features.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Remove the unnecessary rte_atomic.h included in app modules.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
The port_status changes do not need to be handled
atomically, as they are modified during initialization
or through the testpmd prompt instead of multiple
threads.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Convert rte_atomic usages to compiler atomic built-ins
for shared data sync in eventdev cases.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Convert rte_atomic_test_and_set usage to compiler atomic
CAS operation for display sync in crypto cases.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Convert rte_atomic_test_and_set usage to compiler atomic
CAS operation for display sync.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Convert rte_atomic usages to compiler atomic built-ins
for shared data sync in bbdev cases.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Convert rte_atomic usages to compiler atomic
built-ins for lcore_state and collisions sync.
Also, move 'main_init_workers' outside of
'timer_stress2_main_loop' to guarantee lcore_state
initialized correctly before the threads launched.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Convert rte_atomic usages to compiler atomic built-ins
for lcore sync in stack_perf test cases.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Convert rte_atomic usages to compiler atomic built-ins
for lcores sync in ring_perf test cases.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Convert rte_atomic usages to compiler atomic built-ins
for polling sync in pmd_perf test cases.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Convert rte_atomic usages to compiler atomic built-ins
for shared data sync in func_reentrancy test cases.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Convert rte_atomic usages to compiler atomic built-ins
for calculation in bpf test cases.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Currently, if an invalid parameter is passed to the application
it will cause a crash due to missing default in options.
For example:
./dpdk-test-flow-perf -a 01:00.0 -- --invalid
This adds missing default for options, and prints the
invalid option.
Fixes: 3344cf2e30 ("app/flow-perf: add flow performance skeleton")
Cc: stable@dpdk.org
Signed-off-by: Raslan Darawsheh <rasland@nvidia.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Fix spelling errors in comments including doxygen found using codespell.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
This test gives random failures, move it to extra until we have a fix.
See: https://bugs.dpdk.org/show_bug.cgi?id=826
Signed-off-by: David Marchand <david.marchand@redhat.com>
We removed some tests from the "CI" (fast-tests) list because they
were not reliable enough or did not make sense as non regression tests.
Since we still build those tests code, leave an option for users to call
them.
This list can also serve as a point where to document why test X is not
suitable for the "CI" list.
Signed-off-by: David Marchand <david.marchand@redhat.com>
EAL and rwlock tests have been split into smaller unit tests now listed
in meson.
Nothing is referencing eal_flags_autotest and rwlock_autotest anymore,
since we dropped the python wrapper.
Fixes: 8c745bb623 ("test: remove autotest python wrapper")
Signed-off-by: David Marchand <david.marchand@redhat.com>
These tests were using strings with hostname (dpdk.org) and this makes
test code do a DNS lookup. In container environment used for OpenSuse
build, DNS is unavailable. Replace dpdk.org with an IPv4 address
reserved for documentation (RFC5737) and use IPv6 in one example
(RFC3849). Actual addresses don't matter for this test which is
validating that code generated in classic BPF can be successfully
converted to eBPF.
Fixes: 2eccf6afbe ("bpf: add function to convert classic BPF to DPDK BPF")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Luca Boccassi <bluca@debian.org>
Input buffer length is getting appended with
padding length when the test case is encrypted
digest, but output buffer length is appended
with padding length for all the cases.
This patch fixes the output buffer length
by appending the padding length only when the
test case is of encrypted digest type.
Fixes: 6356c28642 ("test/crypto: add cases for block cipher encrypted digest")
Cc: stable@dpdk.org
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The device stats are retrieved in the testcase teardown function,
but are not being used afterwards. Remove this unnecessary call.
The stats retrieval for the device is being tested already by a
dedicated stats testcase.
Fixes: 202d375c60 ("app/test: add cryptodev unit and performance tests")
Cc: stable@dpdk.org
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
The API could return errors. Add error checking for the same.
Fixes: b3bbd9e5f2 ("cryptodev: support device independent sessions")
Cc: stable@dpdk.org
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This patch fixes incorrect data lengths computation in cryptodev
unit test. Previously some data lengths were incorrectly set, which
was insensitive for crypto op unit tets but is critical for raw data
path API unit tests. The patch addressed the issue by setting the
correct data lengths for some tests.
Fixes: 681f540da5 ("cryptodev: do not use AAD in wireless algorithms")
Fixes: e847fc5128 ("test/crypto: add encrypted digest case for AES-CTR-CMAC")
Fixes: b1c1df4687 ("test/crypto: add ZUC test cases for auth-cipher")
Cc: stable@dpdk.org
Signed-off-by: Kai Ji <kai.ji@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
NULL cipher is used for validating auth only cases. With NULL cipher,
validating plain text should not be done as the PMD is only expected
to update auth data.
Fixes: e847fc5128 ("test/crypto: add encrypted digest case for AES-CTR-CMAC")
Cc: stable@dpdk.org
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Ciara Power <ciara.power@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Reported by clang 13.
This patch fixes unused but set variables in the distributor test perf.
Bugzilla ID: 881
Fixes: c0de0eb82e ("distributor: switch over to new API")
Cc: stable@dpdk.org
Reported-by: Liang Longfeng <longfengx.liang@intel.com>
Signed-off-by: Conor Walsh <conor.walsh@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
run_rss_calc() is used to compare the number of cycles spent computing a
hash value for different implementations.
clang 13 reports the hash variable as being unused, but run_rss_calc()
needs this variable as a placeholder for computing the hash value.
Bugzilla ID: 881
Fixes: 239fffe040 ("test/thash: add performance tests for Toeplitz hash")
Reported-by: Liang Longfeng <longfengx.liang@intel.com>
Signed-off-by: Conor Walsh <conor.walsh@intel.com>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
The flow perf application uses the srtcm_rfc2697 as meter profile
while doing the meter testing.
This patch adds new configuration parameter '--packet-mode' to
generate the meter flows with packet cir instead of byte cir.
Signed-off-by: Rongwei Liu <rongweil@nvidia.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Change meter-cir option to meter-profile to cover user input for CIR,
CBS & EBS values.
The usage is as below:
--meter-profile=N1,N2,N3 default value is 1250000 156250 0.
Signed-off-by: Rongwei Liu <rongweil@nvidia.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Add option "policy-mtr" to indicate if meter creation will include policy
or not. Meter creation will keep unchanged without it.
With "policy-mtr", the policy is introduced. API create_meter_policy
is to create a policy. API create_meter_rule will use it to create
a meter. The value of it is used to specify meter policy actions.
Signed-off-by: Haifei Luo <haifeil@nvidia.com>
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Signed-off-by: Rongwei Liu <rongweil@nvidia.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
With flow_options defined as global struct, it's possible
to use sub-functions to handle run-time options.
It's helpful to avoid too many tabs warnings.
Signed-off-by: Rongwei Liu <rongweil@nvidia.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
This is probably due a s/red/rte_red/ a long time ago.
Fixes: de3cfa2c98 ("sched: initial import")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@yahoo.com>
When set port DCB in VT mode enabled, it should remove RSS HASH
offload before reconfiguring the device and queues.
Because port multi-queue mode is changed from RSS to DCB in VT.
Fixes: 2a977b891f ("app/testpmd: fix DCB configuration")
Cc: stable@dpdk.org
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Acked-by: Aman Singh <aman.deep.singh@intel.com>
The 'proc_id' should be less than 'num_procs', if not, exit the testpmd
and show the error message.
Fixes: a550baf24a ("app/testpmd: support multi-process")
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The unit test code should depend on the pcapng library.
Fixes: 7a944656b3 ("test/pcapng: test pcapng library")
Signed-off-by: David Marchand <david.marchand@redhat.com>
The RTE_PORT_PCAP variable is used to signal libpcap availability,
though its name seems to refer to pcap support in the port library.
Prefer a generic name and add explicit link dependencies where needed.
Fixes: 7a944656b3 ("test/pcapng: test pcapng library")
Fixes: 2eccf6afbe ("bpf: add function to convert classic BPF to DPDK BPF")
Fixes: cbb44143be ("app/dumpcap: add new packet capture application")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
This test was never added to the list of tests to run in CI.
Its name does not follow the implicit convention of ending with
_autotest.
Let's fix this.
Fixes: 5e9647fd5a ("test/bitmap: test scan after half cacheline is cleared")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add the test content of the fragment_offset(offset and MF)
to the test_ip_frag function. Add test data for a fragment
that is not the last fragment.
Signed-off-by: Huichao Cai <chcchc88@163.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
In heterogeneous computing system, processing is not only in the CPU.
Some tasks can be delegated to devices working in parallel.
When mixing network activity with task processing there may be the need
to put in communication the CPU with the device in order to synchronize
operations.
An example could be a receive-and-process application
where CPU is responsible for receiving packets in multiple mbufs
and the GPU is responsible for processing the content of those packets.
The purpose of this list is to provide a buffer in CPU memory visible
from the GPU that can be treated as a circular buffer
to let the CPU provide fondamental info of received packets to the GPU.
A possible use-case is described below.
CPU:
- Trigger some task on the GPU
- in a loop:
- receive a number of packets
- provide packets info to the GPU
GPU:
- Do some pre-processing
- Wait to receive a new set of packet to be processed
Layout of a communication list would be:
-------
| 0 | => pkt_list
| status |
| #pkts |
-------
| 1 | => pkt_list
| status |
| #pkts |
-------
| 2 | => pkt_list
| status |
| #pkts |
-------
| .... | => pkt_list
-------
Signed-off-by: Elena Agostini <eagostini@nvidia.com>
In heterogeneous computing system, processing is not only in the CPU.
Some tasks can be delegated to devices working in parallel.
When mixing network activity with task processing there may be the need
to put in communication the CPU with the device in order to synchronize
operations.
The purpose of this flag is to allow the CPU and the GPU to
exchange ACKs. A possible use-case is described below.
CPU:
- Trigger some task on the GPU
- Prepare some data
- Signal to the GPU the data is ready updating the communication flag
GPU:
- Do some pre-processing
- Wait for more data from the CPU polling on the communication flag
- Consume the data prepared by the CPU
Signed-off-by: Elena Agostini <eagostini@nvidia.com>
In heterogeneous computing system, processing is not only in the CPU.
Some tasks can be delegated to devices working in parallel.
Such workload distribution can be achieved by sharing some memory.
As a first step, the features are focused on memory management.
A function allows to allocate memory inside the device,
or in the main (CPU) memory while making it visible for the device.
This memory may be used to save packets or for synchronization data.
The next step should focus on GPU processing task control.
Signed-off-by: Elena Agostini <eagostini@nvidia.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The computing device may operate in some isolated contexts.
Memory and processing are isolated in a silo represented by
a child device.
The context is provided as an opaque by the caller of
rte_gpu_add_child().
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
In heterogeneous computing system, processing is not only in the CPU.
Some tasks can be delegated to devices working in parallel.
The new library gpudev is for dealing with GPGPU computing devices
from a DPDK application running on the CPU.
The infrastructure is prepared to welcome drivers in drivers/gpu/.
Signed-off-by: Elena Agostini <eagostini@nvidia.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Added support to create flows with priority attribute set
randomly between 0 and a user supplied maximum value. This
is useful to measure performance on NICs which may have to
rearrange flows to honor flow priority.
Removed the lower limit of 100000 flows per batch.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
ext_deps was not used in app/meson.build
so testpmd dependency on jansson was ignored.
testpmd currently can be linked because metrics library is pulling
the dependency on libjansson.
Fixes: 59f3a8acbc ("app/testpmd: add flex item commands")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Gregory Etelson <getelson@nvidia.com>
No need for double dependency, once is enough.
While at it, sort alphabetically.
Fixes: fac83b3ef8 ("app: fix missing dependencies")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
testpmd depends on ethdev, which itself depends on meter.
No need for an explicit dependency, since no testpmd code directly calls
in the meter library.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Testpmd provides 2 sets of flex item create and destroy functions
One for hosts with JSON library. These functions parse
flex item configuration stored in JSON file and create or destroy
flex item object. The second functions set is for hosts without JSON
library for compilation compatibility.
On hosts without JSON library, current implementation issues
"no JSON library" notification on port close.
The notification was triggered by port destructors that include
flex items flush routine.
The patch introduces single implementation for testpmd
flex item destroy.
Fixes: 59f3a8acbc ("app/testpmd: add flex item commands")
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Reviewed-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
add unit test for rte_event_eth_rx_adapter_queue_stats_get() and
rte_event_eth_rx_adapter_queue_stats_reset() APIs.
Signed-off-by: Naga Harish K S V <s.v.naga.harish.k@intel.com>
Acked-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Fix the test vectors added for ZUC 256-bit key
Add known vectors form ZUC 256 RFC.
Fixes: fa5bf9345d ("test/crypto: add ZUC cases with 256-bit keys")
Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Fix the IV for ZUC-256 test vectors
Fixes: 216125c62d ("test/crypto: add ZUC-256 vectors")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
In the current implementation, the DOCSIS test cases are running
and being reported as one test, despite the fact that multiple
test cases are hidden inside i.e. "test_DOCSIS_PROTO_all" runs
52 test cases. Each DOCSIS test case should be reported individually
instead.
This commit achieves this by removing the use of the
test_DOCSIS_PROTO_all function and statically listing the test cases
to run when building the test suite, which are then reported to the
user by description.
Signed-off-by: Rebecca Troy <rebecca.troy@intel.com>
Acked-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: David Coyle <david.coyle@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
clang-13 rightfully complains that the total_deq_ops
variable in cperf_cyclecount_op_setup is set but not
used, since the final accumulated total_deq_ops
results isn't used anywhere. So just remove the
total_deq_ops variable.
Fixes: 2695db95a1 ("test/compress: add cycle-count mode to perf tool")
Cc: stable@dpdk.org
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
While populating the crypto ops in case of asymmetric, result
is being allocated from stack. This is causing crash in the
application. And operation type is also not being initialized
properly. Adding a fix by allocating the result from global
memory and initialized the operation memory properly.
Fixes: ba588ce3f9 ("test/crypto-perf: test asymmetric crypto throughput")
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Update the calculation of the max length needed when converting mbuf to
data vec in partial digest test case. This update make sure the enough
vec buffers are allocated for the appended digest in sgl op for raw
datapath api.
Fixes: 4868f6591c ("test/crypto: add cases for raw datapath API")
Cc: stable@dpdk.org
Signed-off-by: Kai Ji <kai.ji@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This patch adds missing IPv6-Ex and GTPU flow types to port
info command. It also add the same definitions to
str2flowtype(), used to configure flow director.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
This patch fixes the display of the RSS hash types
configured in the port, which displayed "all" even
if only a single type was configured
Fixes: 3c90743dd3 ("app/testpmd: support more types for flow RSS")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
port_rss_hash_key_update() initializes rss_conf with the
RSS key configuration provided by the user, but it calls
rte_eth_dev_rss_hash_conf_get() before calling
rte_eth_dev_rss_hash_update(), which overrides the parsed
RSS config.
While the RSS key value is set again after, this is not
the case of the key length. It could cause out of bounds
access if the key length parsed is smaller than the one
read from rte_eth_dev_rss_hash_conf_get().
This patch restores the key length before the
rte_eth_dev_rss_hash_update() call to ensure the RSS key
value/length pair is consistent.
Fixes: 8205e241b2 ("app/testpmd: add missing type to RSS hash commands")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
There is no point to do rte_eth_dev_mtu_set() before configure since
set MTU value is overwritten on configure anyway. So, setting of MTU
before configure is rejected now on ethdev level.
If testpmd is going to do configure (e.g. just after testpmd start
with disabled devices start up or any configuration changes in stopped
state which require reconfigure), just save requested MTU in device
config to be applied on reconfigure.
Fixes: 1bb4a528c4 ("ethdev: fix max Rx packet length")
Fixes: b26bee10ee ("ethdev: forbid MTU set before device configure")
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In "msg_type |= 0xc800", wider "51200" has high-order bits (0xc800)
that don't affect the narrower left-hand side.
This patch fixes coverity issue by changing the definition type of
"msg_type" from uint8_t to uint16_t.
Coverity issue: 373651
Fixes: 748530f035 ("app/testpmd: support L2TPv2 and PPP protocol pattern")
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add optional destination ports parameter for port-id action.
The parameter is not must, and the value is 1 by default as before
if the parameter not provided.
For example:
$ dpdk-test-flow-perf -w 08:00.0,representor=[0,1] -- --transfer \
--ingress --transfer --ether --portmask=0x2 --vxlan-encap \
--port-id=0
This command means the rule created on representor 0 with port 0
as destination, since the portmask is 0x2 and dst-ports is 0:
$ dpdk-test-flow-perf -w 08:00.0,representor=[0,1] \
-w 08:00.1,representor=[0,1]-- --transfer --ingress --transfer \
--ether --portmask=0x12 --vxlan-encap --port-id=0,3
This command means the rules created on both representor 0 of PF 0
and PF 1, the destination port for the first representor is PF 0,
and the destination port for the other one is PF 1.
Signed-off-by: Sean Zhang <xiazhang@nvidia.com>
Reviewed-by: Wisam Jaddo <wisamm@nvidia.com>
rte_bpf_convert() implementation depends on libpcap.
Right now it is defined only when this library is installed and
RTE_PORT_PCAP is defined.
Fix that by providing for such case stub rte_bpf_convert()
implementation that will always return an error.
To draw user attention, if proper implementation is disabled,
warning will be thrown at meson configure stage.
Also move stub for another function (rte_bpf_elf_load) into
the same place (bpf_stub.c).
Fixes: 2eccf6afbe ("bpf: add function to convert classic BPF to DPDK BPF")
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Implement PIE based congestion management based on rfc8033.
The Proportional Integral Controller Enhanced (PIE) algorithm works
by proactively dropping packets randomly.
PIE is implemented as more advanced queue management is required to
address the bufferbloat problem and provide desirable quality of
service to users.
Tests for PIE code added to test application.
Added PIE related information to documentation.
Signed-off-by: Wojciech Liguzinski <wojciechx.liguzinski@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
This patch adds a new parameter to the FIB configuration to specify
the size of the extension for internal RIB structure.
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Tested-by: Conor Walsh <conor.walsh@intel.com>
Seen by ASan.
In the external buffer mbuf test, we check that the buffer is freed
by checking that its refcount is 0.
This is not a valid condition, because it accesses to an already
freed area.
Fix this by setting a boolean flag in the callback when rte_free()
is actually called, and check this flag instead.
Bugzilla ID: 867
Fixes: 7b295dceea ("test/mbuf: add unit test cases")
Cc: stable@dpdk.org
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
This patch adds performance tests for the following Toeplitz hash
function implementations:
Scalar:
- rte_softrss()
- rte_softrss_be()
Vector using gfni:
- rte_thash_gfni()
- rte_thash_gfni_bulk()
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
This patch adds a bulk version for the Toeplitz hash implemented
with Galios Fields New Instructions (GFNI).
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch add a new Toeplitz hash implementation using
Galios Fields New Instructions (GFNI).
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Amount of locked memory for regular users is limited,
it is usually 64 KB by default.
Hitting this limit in rte_mempool_populate_anon()
resulted in not populating the mempool, and a test case failure:
EAL: Test assert test_mempool_events line 585 failed: Failed to populate mempool empty1: Success
test failed at test_mempool():1019
Test Failed
Decrease the amount of mapped anonymous memory to fit the limit.
While there, make all function-local constants lowercase.
Fixes: 11541c5c81 ("mempool: add non-IO flag")
Reported-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
FreeBSD EAL does not implement rte_mem_virt2iova() causing an error:
EAL: Test assert test_mempool_flag_non_io_unset_when_populated_with_valid_iova
line 781 failed: Cannot get IOVA
test failed at test_mempool():1030
Test Failed
Change unit test to use rte_memzone_reserve() to allocate memory,
which allows to obtain IOVA directly.
Bugzilla ID: 863
Fixes: 11541c5c81 ("mempool: add non-IO flag")
Reported-by: Yu Jiang <yux.jiang@intel.com>
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
(bitratestats_autotest|latencystats_autotest|pdump_autotest) tests
generate a log of error messages like that:
test_packet_forward() line 104: Error sending packet to port 0
Send pkts Failed
These tests use of app/test/sample_packet_forward.* code.
This code creates a portid from a ring, but doesn't properly
configure/start it.
The fix adds code to configure/start given port before usage.
Fixes: 7a0935239b ("ethdev: make fast-path functions to use new flat array")
Fixes: a52966cd48 ("test: add helpers using ring PMD Rx/Tx")
Cc: stable@dpdk.org
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: David Marchand <david.marchand@redhat.com>
Some options are needed in the runtime many times, so leaving
it during compilation is not correct. As a result some options
has been exported into command line options to be used at run
time.
The options exported are:
--txq=N
--rxq=N
--txd=N
--rxd=N
--mbuf-size=N
--mbuf-cache-size=N
--total-mbuf-count=N
Signed-off-by: Wisam Jaddo <wisamm@nvidia.com>
Reviewed-by: Alexander Kozyrev <akozyrev@nvidia.com>
Add a testcase to test launching of control threads.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Updating the interrupt testsuite to make use of interrupt
handle get set APIs.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Raslan Darawsheh <rasland@nvidia.com>
wrk_cmd variable is used to signal the worker thread to start
or stop the stress test loop. Relaxed barriers are used
to achieve the same.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Feifei Wang <feifei.wang2@arm.com>
When mempool had been created with RTE_MEMPOOL_F_NO_IOVA_CONTIG flag
but later populated with valid IOVA, RTE_MEMPOOL_F_NON_IO was unset,
while it should be kept. The unit test did not catch this
because rte_mempool_populate_default() it used was populating
with RTE_BAD_IOVA.
Keep setting RTE_MEMPOOL_NON_IO at an empty mempool creation
and add an assert for it in the unit test (remove the separate case).
Do not reset the flag if RTE_MEMPOOL_F_ON_IOVA_CONTIG is set.
Fixes: 11541c5c81 ("mempool: add non-IO flag")
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
In layer argument test function, kvargs are parsed and checked without
free. This patch calls rte_kvargs_free() function to avoid memory leak.
Coverity issue: 373631
Fixes: a4975cd20d ("test: add devargs test cases")
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Fix the mbuf offload flags namespace by adding an RTE_ prefix to the
name. The old flags remain usable, but a deprecation warning is issued
at compilation.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
The flags PKT_TX_VLAN_PKT and PKT_TX_QINQ_PKT are
marked as deprecated since commit 380a7aab1a ("mbuf: rename deprecated
VLAN flags") (2017). But they were not using the RTE_DEPRECATED
macro, because it did not exist at this time. Add it, and replace
usage of these flags.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
An autotest is added for the new chacha20_poly1305 PMD.
A new test case is also added for SGL test.
Signed-off-by: Kai Ji <kai.ji@intel.com>
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add extra ZUC-EIA3-256 and ZUC-EEA3-256 test vectors.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Check for auth parameters in the transform to verify if a test case is
supported by the crypto device under test.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Check for cipher parameters in the transform to verify if a test case
is supported by the crypto device under test.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to have 'rte_eth' prefix.
All internal components switched to using new names.
Syntax fixed on lines that this patch touches.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
link bounding auto-test internally creates emulated ethdev.
Some tests change Rx/Tx functions of this emulated device on the fly:
by directly modifying rte_eth_dev fields and without doing stop/start
for these devices.
As now ethdev uses rte_eth_fp_ops[] for fast-path functions, these
direct changes doesn't make expected effect.
Fix the problem by guarding fast-path functions changes with
rte_eth_dev_stop()/rte_eth_dev_start().
Fixes: 7a0935239b ("ethdev: make fast-path functions to use new flat array")
Reported-by: Lewei Yang <leweix.yang@intel.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
RX/TX functions (rte_eth_rx_burst/rte_eth_tx_burst) get 'nb_pkts'
argument, which specifies the maximum number to receive/transmit.
It can be 0..nb_pkts, meaning nb_pkts+1 options.
Testpmd can provide statistics of the burst sizes ('set
record-burst-stats on') by incrementing an array cell of index
<burst-size>. This array is mistakenly [MAX_PKT_BURST] size. Receiving
the maximum burst will cause out of bound write.
Enlarge the spread stats array by one cell to fix it.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Eli Britstein <elibr@nvidia.com>
Reviewed-by: Matan Azrad <matan@nvidia.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
To support shared Rx queue, this patch introduces dedicate forwarding
engine. The engine groups received packets by mbuf->port into sub-group,
updates stream statistics and simply frees packets.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Shared Rx queue must be polled on same core. This patch checks and stops
forwarding if shared RxQ being scheduled on multiple
cores.
It's suggested to use same number of Rx queues and polling cores.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
In case of shared Rx queue, source port mbuf from polling result isn't
the Rx port of forwarding stream. To provide original port ID, this
patch dumps mbuf->port for each packet in verbose mode if shared Rx
queue enabled.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Adds "--rxq-share=X" parameter to enable shared RxQ.
Rx queue is shared if device supports, otherwise fallback to standard
RxQ.
Shared Rx queues are grouped per X ports. X defaults to UINT32_MAX,
implies all ports join share group 1. Queue ID is mapped equally with
shared Rx queue ID.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Dump device capability and Rx domain ID if shared Rx queue is supported
by device.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support for test-pmd to parse protocol pattern L2TPv2 and PPP.
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Malloc cl in the cmdline_stdin_new function, so release in the
cmdline_stdin_exit function is logical, so that cl will not be
released alone.
Fixes: af75078fec ("first public release")
Signed-off-by: Zhihong Peng <zhihongx.peng@intel.com>
Reviewed-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Zhihong Peng <zhihongx.peng@intel.com>
Hide struct rdline definition and some RDLINE_* constants in order
to be able to change internal buffer sizes transparently to the user.
Add new functions:
* rdline_new(): allocate and initialize struct rdline.
This function replaces rdline_init() and takes an extra parameter:
opaque user data for the callbacks.
* rdline_free(): deallocate struct rdline.
* rdline_get_history_buffer_size(): for use in tests.
* rdline_get_opaque(): to obtain user data in callback functions.
Remove rdline_init() function from library headers and export list,
because using it requires the knowledge of sizeof(struct rdline).
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Narcisa Vasile <navasile@linux.microsoft.com>
This is a new packet capture application to replace existing pdump.
The new application works like Wireshark dumpcap program and supports
the pdump API features.
It is not complete yet some features such as filtering are not implemented.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The pcap library emits classic BPF (32 bit) and is useful for
creating filter programs. The DPDK BPF library only implements
extended BPF (eBPF). Add an function to convert from old to
new.
The rte_bpf_convert function uses rte_malloc to put the resulting
program in hugepage shared memory so it can be passed from a
secondary process to a primary process.
The code to convert was originally done as part of the Linux
kernel implementation then converted to a userspace program.
See https://github.com/tklauser/filter2xdp
Both authors have agreed that it is allowable to create a modified
version of this code and license it with BSD license used by DPDK.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
The BPF autotest is defined but not run automatically.
Since it is short, it should be added to the autotest suite.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Simple unit test that created pcapng file using API.
To run this test you need to have at least one device.
For example:
DPDK_TEST=pcapng_autotest ./build/app/test/dpdk-test -l 0-15 \
--no-huge -m 2048 --vdev=net_tap,iface=dummy
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
No need to expose rte_dma_devices out of the dmadev library.
Existing helpers should be enough, and inlines make use of
rte_dma_fp_objs.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Chengwen Feng <fengchengwen@huawei.com>
Tested-by: Conor Walsh <conor.walsh@intel.com>
Acked-by: Kevin Laatz <kevin.laatz@intel.com>
This commit adds producer, worker and consumer port hints for the
test-eventdev application performance tests.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Introduce a new command line option prod_enq_burst_sz
to set burst size for eventdev enqueue at producer in perf_queue
test. The newly added function perf_producer_burst is called when
prod_enq_burst_sz is greater than 1.
Signed-off-by: Rashmi Shetty <rashmi.shetty@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Before this commit, a Control^C exit of the test-eventdev application
would print the worker packet percentages, and leave the terminal with
a green colour despite the colour reset being issued after the newline.
By moving the colour reset command before the \n the issue is fixed.
Fixes: 6b1a14a83a ("app/eventdev: add packet distribution logs")
Cc: stable@dpdk.org
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Added per queue buffer. To configure per queue event buffer size,
application sets rte_event_eth_rx_adapter_params::use_queue_event_buf
flag as true while using rte_event_eth_rx_adapter_create_with_params().
The per queue event buffer size is populated in
rte_event_eth_rx_adapter_queue_conf::event_buf_size and passed
to rte_event_eth_rx_adapter_queue_add().
Signed-off-by: Naga Harish K S V <s.v.naga.harish.k@intel.com>
Acked-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Currently event buffer is static array with a default size defined
internally.
To configure event buffer size from application,
rte_event_eth_rx_adapter_create_with_params() API is added which
takes struct rte_event_eth_rx_adapter_params to configure event
buffer size in addition other params. The event buffer size is
rounded up for better buffer utilization and performance. In case
of NULL params argument, default event buffer size is used.
Signed-off-by: Naga Harish K S V <s.v.naga.harish.k@intel.com>
Signed-off-by: Ganapati Kundapura <ganapati.kundapura@intel.com>
Acked-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Added rte_event_eth_rx_adapter_queue_conf_get() API to get rx queue
information - event queue identifier, flags for handling received packets,
scheduler type, event priority, polling frequency of the receive queue
and flow identifier in rte_event_eth_rx_adapter_queue_conf structure
Signed-off-by: Ganapati Kundapura <ganapati.kundapura@intel.com>
Acked-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Include vector configuration into the structure
``rte_event_eth_rx_adapter_queue_conf`` that is used to configure
Rx adapter ethernet device Rx queue parameters.
This simplifies event vector configuration as it avoids splitting
configuration per Rx queue.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Event crypto adapter spec does not mention about cryptodev start and
stop. Cryptodev attached to the adapter should be started before calling
crypto adapter start. Added the same in spec and test application.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Cores count has a direct impact on the time needed to complete unit
tests.
Currently, the core list used for unit test is enforced to "all cores on
the system" with no way for (CI) users to adapt it.
On the other hand, EAL default behavior (when no -c/-l option gets passed)
is to start threads on as many cores available in the process cpu
affinity.
Remove logic from meson: users can then select where to run the tests by
either running meson with a custom cpu affinity (using taskset/cpuset
depending on OS) or by passing a --test-args option to meson.
Example:
$ sudo meson test -C build --suite fast-tests -t 3 --test-args "-l 0-3"
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Aaron Conole <aconole@redhat.com>
m->nb_seg must be reset on mbuf free whatever the value of m->next,
because it can happen that m->nb_seg is != 1. For instance in this
case:
m1 = rte_pktmbuf_alloc(mp);
rte_pktmbuf_append(m1, 500);
m2 = rte_pktmbuf_alloc(mp);
rte_pktmbuf_append(m2, 500);
rte_pktmbuf_chain(m1, m2);
m0 = rte_pktmbuf_alloc(mp);
rte_pktmbuf_append(m0, 500);
rte_pktmbuf_chain(m0, m1);
As rte_pktmbuf_chain() does not reset nb_seg in the initial m1
segment (this is not required), after this code the mbuf chain
have 3 segments:
- m0: next=m1, nb_seg=3
- m1: next=m2, nb_seg=2
- m2: next=NULL, nb_seg=1
Then split this chain between m1 and m2, it would result in 2 packets:
- first packet
- m0: next=m1, nb_seg=2
- m1: next=NULL, nb_seg=2
- second packet
- m2: next=NULL, nb_seg=1
Freeing the first packet will not restore nb_seg=1 in the second
segment. This is an issue because it is expected that mbufs stored
in pool have their nb_seg field set to 1.
Fixes: 8f094a9ac5 ("mbuf: set mbuf fields while in pool")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Ali Alnubani <alialnu@nvidia.com>
This patch fixes buffer overflow reported by ASAN,
please reference https://bugs.dpdk.org/show_bug.cgi?id=818
Some tests for the rte_hash table use the rte_jhash_32b() as
the hash function. This hash function interprets the length
argument in units of 4 bytes.
This patch adds a wrapper function around rte_jhash_32b()
to reflect API differences regarding the length argument,
effectively dividing it by 4.
For some tests rte_jhash() is used with keys of length not
a multiple of 4 bytes. From the rte_jhash() documentation:
If input key is not aligned to four byte boundaries or a
multiple of four bytes in length, the memory region just
after may be read (but not used in the computation).
This patch increases the size of the proto field of the
flow_key struct up to uint32_t.
Bugzilla ID: 818
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Yipeng Wang <yipeng1.wang@intel.com>
Network port hardware is shipped with fixed number of
supported network protocols. If application must work with a
protocol that is not included in the port hardware by default, it
can try to add the new protocol to port hardware.
Flex item or flex parser is port infrastructure that allows
application to add support for a custom network header and
offload flows to match the header elements.
Application must complete the following tasks to create a flow
rule that matches custom header:
1. Create flow item object in port hardware.
Application must provide custom header configuration to PMD.
PMD will use that configuration to create flex item object in
port hardware.
2. Create flex patterns to match. Flex pattern has a spec and a mask
components, like a regular flow item. Combined together, spec and mask
can target unique data sequence or a number of data sequences in the
custom header.
Flex patterns of the same flex item can have different lengths.
Flex pattern is identified by unique handler value.
3. Create a flow rule with a flex flow item that references
flow pattern.
Testpmd flex CLI commands are:
testpmd> flow flex_item create <port> <flex_id> <filename>
testpmd> set flex_pattern <pattern_id> \
spec <spec data> mask <mask data>
testpmd> set flex_pattern <pattern_id> is <spec_data>
testpmd> flow create <port> ... \
/ flex item is <flex_id> pattern is <pattern_id> / ...
The patch works with the jansson library API.
A new optional dependency on jansson library is added for
testpmd. If jansson not detected the flex item functionality
is disabled.
Jansson development files must be present:
jansson.pc, jansson.h libjansson.[a,so]
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Reviewed-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
testpmd flow creation is constructed from these procedures:
1. receive string with flow rule description;
2. parse input string and build flow parameters: port_id value,
flow attributes, items array, actions array;
3. create a flow rule from flow rule parameters.
Flow rule creation procedures are built as a pipeline. A new
procedure starts immediately after successful predecessor completion.
Due to this we have no dedicated routines providing intermediate
results for step 1-3 above.
The patch adds `flow_parse()` function call. It parses input string
and provides a caller with parsed data. This is a preparation step
for introducing flex item command processing.
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Reviewed-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Current testpmd implementation supports VXLAN only for tunnel offload.
Add GRE, NVGRE and GENEVE for tunnel offload flow matches.
For example:
testpmd> flow tunnel create 0 type vxlan
port 0: flow tunnel #1 type vxlan
testpmd> flow tunnel create 0 type nvgre
port 0: flow tunnel #2 type nvgre
testpmd> flow tunnel create 0 type gre
port 0: flow tunnel #3 type gre
testpmd> flow tunnel create 0 type geneve
port 0: flow tunnel #4 type geneve
Fixes: 1b9f274623 ("app/testpmd: add commands for tunnel offload")
Cc: stable@dpdk.org
Signed-off-by: Eli Britstein <elibr@nvidia.com>
Reviewed-by: Gregory Etelson <getelson@nvidia.com>
During parsing of DSCP entries, memory is allocated and assigned
to *dscp_table. Later on, same memory is accessed using
*dscp_table[i++].
Due to higher precedence for array subscript, dscp_table[i++] will
be executed first which actually does not point to the same memory
which was allocated previously for DSCP table entries.
Fixes: 459463ae6c ("app/testpmd: fix memory allocation for DSCP table")
Cc: stable@dpdk.org
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Removing 'DEV_RX_OFFLOAD_JUMBO_FRAME' offload flag.
Instead of drivers announce this capability, application can deduct the
capability by checking reported 'dev_info.max_mtu' or
'dev_info.max_rx_pktlen'.
And instead of application setting this flag explicitly to enable jumbo
frames, this can be deduced by driver by comparing requested 'mtu' to
'RTE_ETHER_MTU'.
Removing this additional configuration for simplification.
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
There is a confusion on setting max Rx packet length, this patch aims to
clarify it.
'rte_eth_dev_configure()' API accepts max Rx packet size via
'uint32_t max_rx_pkt_len' field of the config struct 'struct
rte_eth_conf'.
Also 'rte_eth_dev_set_mtu()' API can be used to set the MTU, and result
stored into '(struct rte_eth_dev)->data->mtu'.
These two APIs are related but they work in a disconnected way, they
store the set values in different variables which makes hard to figure
out which one to use, also having two different method for a related
functionality is confusing for the users.
Other issues causing confusion is:
* maximum transmission unit (MTU) is payload of the Ethernet frame. And
'max_rx_pkt_len' is the size of the Ethernet frame. Difference is
Ethernet frame overhead, and this overhead may be different from
device to device based on what device supports, like VLAN and QinQ.
* 'max_rx_pkt_len' is only valid when application requested jumbo frame,
which adds additional confusion and some APIs and PMDs already
discards this documented behavior.
* For the jumbo frame enabled case, 'max_rx_pkt_len' is an mandatory
field, this adds configuration complexity for application.
As solution, both APIs gets MTU as parameter, and both saves the result
in same variable '(struct rte_eth_dev)->data->mtu'. For this
'max_rx_pkt_len' updated as 'mtu', and it is always valid independent
from jumbo frame.
For 'rte_eth_dev_configure()', 'dev->data->dev_conf.rxmode.mtu' is user
request and it should be used only within configure function and result
should be stored to '(struct rte_eth_dev)->data->mtu'. After that point
both application and PMD uses MTU from this variable.
When application doesn't provide an MTU during 'rte_eth_dev_configure()'
default 'RTE_ETHER_MTU' value is used.
Additional clarification done on scattered Rx configuration, in
relation to MTU and Rx buffer size.
MTU is used to configure the device for physical Rx/Tx size limitation,
Rx buffer is where to store Rx packets, many PMDs use mbuf data buffer
size as Rx buffer size.
PMDs compare MTU against Rx buffer size to decide enabling scattered Rx
or not. If scattered Rx is not supported by device, MTU bigger than Rx
buffer size should fail.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
The driver may change RSS hash offloads in dev->data->dev_conf
during dev_configure which may cause port->dev_conf and port->rx_conf
contain outdated values.
Since testpmd uses its configuration structures to display offloads
configuration, it doesn't display RSS hash offload.
This patch updates the testpmd offloads from device configuration
to fix this issue.
Fixes: ce8d561418 ("app/testpmd: add port configuration settings")
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
RTE IPv4 header definition combines the `version' and `ihl' fields
into a single structure member.
This patch introduces dedicated structure members for both `version'
and `ihl' IPv4 fields. Separated header fields definitions allow to
create simplified code to match on the IHL value in a flow rule.
The original `version_ihl' structure member is kept for backward
compatibility.
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add 'display-xstats' option for using in accompanying with Rx/Tx statistics
(i.e. 'stats-period' option or 'show port stats' interactive command) to
display specified list of extended statistics.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The hexadecimal string parser does not check the target
field buffer size, buffer overflow happens and might
cause the application failure (segmentation fault
is observed usually).
Fixes: 169a9fed1f ("app/testpmd: fix hex string parser support for flow API")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
The testpmd flow create command updates provided:
- modify field action supports the updated actions
- pointer type added for action source field
- pointer and value source field takes hex string
instead of unsigned int in host endianness
There are some examples of flow with update modified
field action:
1. IPv6 destination address bytes 4-7 assignment:
0000::1111 - > 0000:xxxx:4455:6677::1111
flow create 0 egress group 1
pattern eth / ipv6 dst is 0000::1111 / udp / end
actions modify_field op set
dst_type ipv6_dst
dst_offset 32
src_type value
src_value 0011223344556677
width 32 / end
2. Copy second byte of IPv4 destination address to the
third byte of source address:
10.0.118.4 -> 192.168.100.1
10.0.168.4 -> 192.168.100.1
flow create 0 egress group 1
pattern eth / ipv4 / udp / end
actions modify_field op set
dst_type ipv4_src
dst_offset 16
src_type ipv4_dst
src_offset 8
width 8 / end
3. Assign METADATA value with 11223344 value from the
hex string in the linear buffer. Please note, the value
definition should follow host-endian, example is given
for x86 (little-endian):
flow create 0 egress group 1
pattern eth / ipv4 / end
actions modify_field op set
dst_type meta
src_type pointer
src_ptr 44332211
width 32 / end
4. Assign destination MAC with EA:11:0B:AD:0B:ED value:
flow create 0 egress group 1
pattern eth / end
actions modify_field op set
dst_type mac_dst
src_type value
src_value EA110BAD0BED
width 48 / end
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Not all DPDK ports in a given switching domain may have the
privilege to manage "transfer" flows. Add an API to find a
port with sufficient privileges by any port in the domain.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
For use in "transfer" flows. Supposed to send matching traffic to the
entity represented by the given ethdev, at embedded switch level.
Such an entity can be a network (via a network port), a guest
machine (via a VF) or another ethdev in the same application.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
For use in "transfer" flows. Supposed to send matching traffic to
the given ethdev (to the application), at embedded switch level.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
For use in "transfer" flows. Supposed to match traffic entering the
embedded switch from the entity represented by the given ethdev.
Such an entity can be a network (via a network port), a guest
machine (via a VF) or another ethdev in the same application.
Must not be combined with direction attributes.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
For use in "transfer" flows. Supposed to match traffic
entering the embedded switch from the given ethdev.
Must not be combined with direction attributes.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Introduce rte_eth_macaddrs_get() to allow user to retrieve all ethernet
addresses assigned to given port.
Change testpmd to use this new function and avoid referencing directly
rte_eth_devices[].
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Feifei Wang <feifei.wang2@arm.com>
Provide an API to let the application control the NIC's ability
to deliver specific kinds of per-packet metadata to the PMD.
Checks for the NIC's ability to set these kinds of metadata
in the first place (support for the flow actions) belong in
flow API responsibility domain (flow validate mechanism).
This topic is out of scope of the new API in question.
The PMD's ability to deliver received metadata to the user
by virtue of mbuf fields should be covered by mbuf library.
It is also out of scope of the new API in question.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Indirect actions should be used to do shared counters.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Make it simpler to debug configurations and code related to the representor
info API.
Signed-off-by: Viacheslav Galaktionov <viacheslav.galaktionov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
When configuring DCB, testpmd retains the rx_mode/tx_mode configuration in
rte_port->dev_conf. But some configurations, such as the link_speed, were
not saved if they were set before configuring DCB.
Fixes: 1a572499be ("app/testpmd: setup DCB forwarding based on traffic class")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Add a new cmdline to help diagnostic the bonding mode 4 in testpmd.
Show the lacp information about the bonded device and its slaves:
show bonding lacp info <bonded device port_id>
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
When random number of Tx segments is enabled, because the actual
number of segments may be only one, the first segment of the Tx
packets must accommodate a complete being sending Eth/IP/UDP packet.
Besides, if multiple flow is enabled, the forwarding will update
the IP and UDP header, these headers shouldn't cross segments.
This also requires the first Tx segment can accommodate a complete
Eth/IP/UDP packet.
In addition, if time stamp is enabled, the forwarding needs more
Tx segment space for time stamp information.
This patch adds checks in beginning of forward engine to make sure
all above conditions are met.
Bugzilla ID: 797
Fixes: 79bec05b32 ("app/testpmd: add ability to split outgoing packets")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
For each forward engine, there may be some special conditions
must be met before the forwarding runs.
Adding checks for these conditions in configuring is not suitable,
because one condition may rely on multiple configurations, and the
conditions required by each forward engine is not general.
The best solution is each forward engine has a callback to check
whether these conditions are met, and then testpmd can call the
callback to determine whether the forwarding can be started.
There was a void callback 'port_fwd_begin' in forward engine,
it did some initialization for forwarding, this patch updates its
return value then we can add some checks in it to confirm whether
the forwarding can be started. In addition, this patch calls the
callback before the forwarding stats is reset and then launches the
forwarding engine.
Bugzilla ID: 797
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
test_shift1_check() function fails with clang build.
The reason for that is that clang uses 64-bit shift instruction for
what expected to be 32-bit operation.
To be more specific, this C code:
r2 = (uint32_t)r2 >> r4;
With clang produces:
41a4eb: 48 d3 ef shr %cl,%rdi
In that particular case it is an allowed choice, as from one side
left-operand value is known to fit into 32 bits, from other side
according to 'C' standard:
"...if the value of the right operand is negative or is greater than
or equal to the width of the promoted left operand, the behavior is
undefined."
The problem is that on x86 behavior for 64-bit and 32-bit shift
operation might differ.
The fix avoids undefined behavior by making sure
that right operand will not exceed width of the promoted left operand.
Bugzilla ID: 811
Fixes: 9f8f9d91a7 ("test/bpf: introduce functional test")
Cc: stable@dpdk.org
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
With data input, output and harq also supported in big
endian format, this patch updates the testbbdev application
to handle the endianness conversion as directed by the
the driver being used.
The test vectors assumes the data in the little endian order, and
thus if the driver supports big endian data processing, conversion
from little endian to big is handled by the testbbdev application.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>
Enabled NXP la12xx bbdev driver in test bbdev app
for unit testing.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>
This patch add support for RAW API testing with ZUC
and SNOW test cases.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
