eal_flags_autotest was broken after commit
19bfa4dd ("eal: make the -n argument optional"),
since the unit test was checking that app would not run
if -n flag was missing, which now it is possible.
Also, subtest test_missing_n_flag() has been renamed
to test_invalid_n_flag(), as now -n flag is not compulsory.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
If using multiple cores on a system with hardware transactional
memory support, thread scaling does not work, as there was a single
point in the hash library which is a bottleneck for all threads,
which is the "free_slots" ring, which stores all the indices of
the free slots in the table.
This patch fixes the problem, by creating a local cache per logical core,
which stores locally indices of free slots,
so most times, writer threads will not interfere each other.
Fixes: 48a3991196 ("hash: replace with cuckoo hash implementation")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Test commands are added to support selecting different length of GRE key.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Test commands are added to support selecting input set, or adding
new input set per different pctype.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Add a performance test for ring pmd, comparing performance of the pmd
compared to the basic rte_ring APIs.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch adds a command to display DCB info in ports.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch changes the testpmd DCB forwarding stream to make it
based on traffic class.
It also fixes some coding style issues.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
The "show port X rss-hash" command sometimes displays garbage instead of the
expected RSS hash key because the maximum key length is undefined. When the
requested key is too large to fit in the buffer,
rte_eth_dev_rss_hash_conf_get() does not update it.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
DPDK uses a structure to get or set a new hash key (see
eth_rte_rss_hash_conf). rss_hf field from this structure is used in
rss_hash_get_conf to retrieve the hash key and in rss_hash_update uses
it to verify the key exists before trying to update it.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
For some ethnet-switch like intel RRC, all the packet forwarded
out by DPDK will be dropped in switch side, so the packet
generator will never receive the packet.
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The different fdir mode needs different parameters, so, the parameter *mode*
is introduced to the CLI flow_director_filter and flow_director_mask. This
parameter can pormpt the user to input the appropriate parameters for different
mode.
Please be aware, as we should set the fdir mode, the value of the parameter
pkt-filter-mode, when we start testpmd. We cannot set a different mode for
mask or filter.
The new CLIs are added for the mac vlan and tunnel modes, like this,
flow_director_mask X mode MAC-VLAN vlan XXXX mac XX,
flow_director_mask X mode Tunnel vlan XXXX mac XX tunnel-type X tunnel-id XXXX,
flow_director_filter X mode MAC-VLAN add/del/update mac XX:XX:XX:XX:XX:XX
vlan XXXX flexbytes (X,X) fwd/drop queue X fd_id X,
flow_director_filter X mode Tunnel add/del/update mac XX:XX:XX:XX:XX:XX
vlan XXXX tunnel NVGRE/VxLAN tunnel-id XXXX flexbytes (X,X) fwd/drop queue X
fd_id X.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
There're fdir mask and supported flow type in the output of the CLI,
show port fdir. But not every parameter has meaning for all the fdir
modes, and the supported flow type is meaningless for mac vlan and
tunnel modes. So, we output different thing for different mode.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
For testpmd CLI's parameter pkt-filter-mode, there're new values supported for
fdir new modes, perfect-mac-vlan, perfect-tunnel.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
When a port is enabled, there're default values for the parameters of
fdir mask. For the new parameters, the default values also need to be
set.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This is a useful default for simple applications where the assignment
of lcores to CPUs doesn't matter. It's also useful for more complex
applications that automatically assign tasks to cores based on the
NUMA topology.
Signed-off-by: Rich Lane <rich.lane@bigswitch.com>
Currently, there is a MAX_SOCKET macro which artificially limits the
number of NUMA sockets testpmd can use. Anything on a higher socket
ends up using socket zero. This patch replaces this with a variable
set during set_default_fwd_lcores_config() and uses RTE_MAX_NUMA_NODES
where a hard-coded max number of sockets is required.
Signed-off-by: Stephen Hurd <shurd@broadcom.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
'virtual' is a keyword and can't be used if the code is to compile with
C++ compilers.
If rte_devargs.h was included in C++ code, compilation with clang++
failed with an error. g++ did not fail, but only because of a bug
that treats it as an anonymous struct with a decl-specifier which it
ignores.
This simply renames the member to 'virt'.
Reported-by: Ming Zhao <mzhao@luminatewireless.com>
Signed-off-by: Christoph Gysin <christoph.gysin@gmail.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
This patch relates to ABI change proposed for librte_port. Macros to
access the packet meta-data stored within the packet buffer has been
adjusted to cover the packet mbuf structure.
The LIBABIVER number is incremented.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
LPM table and pipeline apps have been modified to
include name parameter of the lpm table.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The function rte_jhash2() was renamed rte_jhash_32b and
macros RTE_HASH_KEY_LENGTH_MAX and RTE_HASH_BUCKET_ENTRIES_MAX
were tagged as deprecated, so they can be removed in 2.2.
RTE_HASH_KEY_LENGTH is replaced in unit tests by an internal macro
for the memory allocation of all keys used.
The library version number is incremented.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
These functions were tagged as deprecated in 2.0 so they can be
removed in 2.2.
The library version is incremented.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Helin Zhang <helin.zhang@intel.com>
[Thomas: update doc and version]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The functions and structures are moved to app/test in order to keep
existing unit tests. Some minor changes were done in these functions
because of library scope restrictions.
An enum is also copied in two other applications to keep existing code.
The library version is incremented.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The library version is incremented.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The extended SCTP flow entries are now part of the standard API.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The extended unified packet type is now part of the standard ABI.
As mbuf struct is changed, the mbuf library version is incremented.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
In table_autotest, the structures containing the parameters
to create the tables were not initialized, and therefore,
some checks could fail and so the unit test.
Also, due to this initialization, one of the tests that was
checking if the table was improperly initialized has been
removed, as it is not needed anymore (duplicated)
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
In commit: 1129992baa checking for offset alignment was removed.
Unit tests wasn't updated to reflect that change. This patch changes
checks with unaligned offsets to make tests pass.
Fixes: 1129992baa ("port: fix unaligned access to metadata")
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Test failed on verification if number of bytes
transmitted on each slave is not less than 90%
and greater than 110% of mean value of bytes transmitted
thru one slave. This was verified on a real system
but is difficult to achieve using virtualpmd.
That's why for unit tests only, it is sufficient to verify that with
high load (2 seconds transmission) all slaves are transmitting
so the traffic is balanced.
Fixes: 0c8396e6d7 ("bond: unit tests for mode 5")
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
'--no-huge' option now can workable with -m option.
Unit test for eal flag should change pass criterion.
Fixes: a7de7e6beb ("eal: allow combining -m and --no-huge")
Signed-off-by: Marvin Liu <yong.liu@intel.com>
In previous setting, mempool size and cache_size were both 32.
It does not satisfy with cache_size checking rule by now.
Cache size should be less than CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE and
mempool size / 1.5.
Fixes: 462321b44a ("mempool: limit cache size")
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
[Thomas: remove unused PKT_BURST_SZ]
Add new timer-manage race-condition test: We wrote a test to confirm
our suspicion that we could crash rte_timer_manage() under the right
circumstances. We repeatedly set several timers to expire at roughly
the same time on the master core. The master lcore just delays and runs
rte_timer_manage() about ten times per second. The slave lcores all
watch the first timer (timer-0) to see when rte_timer_manage() is
running on the master, i.e., timer-0's state is not PENDING.
At this point, each slave attempts to reset a subset of the timers to
a later expiration time. The goal here is to have the slaves moving
most of the timers to a different place in the master's pending-list,
while the master is traversing the same next-pointers (the slaves'
sl_next[0] pointers) and running callback functions. This eventually
results in the master traversing a corrupted linked-list.
In our observations, it results in an infinite loop.
Signed-off-by: Robert Sanford <rsanford@akamai.com>
Fix app/test timer stress test 2: Sometimes this test fails and
seg-faults because the slave lcores get out of phase with the master.
The master uses a single int, 'ready', to synchronize multiple slave
lcores through multiple phases of the test.
To resolve, we construct simple synchronization primitives that use one
atomic-int state variable per slave. The master tells the slaves when to
start, and then waits for all of them to finish. Each slave waits for
the master to tell it to start, and then tells the master when it has
finished.
Signed-off-by: Robert Sanford <rsanford@akamai.com>
When close one port twice, testpmd will give out wrong messagse.
testpmd> port stop 0
Stopping ports...
Checking link statuses...
Port 0 Link Up - speed 0 Mbps - full-duplex
Port 1 Link Up - speed 0 Mbps - full-duplex
Done
testpmd> port close 0
Closing ports...
Done
testpmd> port close 0
Closing ports...
Port 0 is now not stopped
Done
testpmd>
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
In testpmd, when using "rx_vlan add 1 77", it will be a segment fault
Because the port ID should be less than 32.
Fixes: edab33b1c0 ("app/testpmd: support port hotplug")
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
When the bonded port is started it also starts the slave port,
but the slave port status is not set. A slave_flag has been
added to struct rte_port to resolve this issue.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
[Thomas: move inclusion used by ixgbe bypass]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
A packet is tunnelled if the tunnel type is identified or if it has
an inner part.
Fix also some typos in RTE_PTYPE_INNER_L3_MASK and IP comments.
Fixes: f295a00a2b ("mbuf: add definitions of unified packet types")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
In ieee1588fwd.c, timestamp.tv_sec is a time_t variable,
which is a long int, but it was being printed with PRIu64,
causing an issue on 32 bits.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
At this point the stop() and close() functions have already been called.
The rte_eth_promiscuous_disable() function does not return on the VM.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
proc_info displays statistics information including extended stats for
given DPDK ports and dumps the memory information for DPDK.
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Implement rte_memzone_free which, as its name implies, would free a
memzone.
Currently memzone are tracked in an array and cannot be free.
To be able to reuse the same array to track memzones, we have to
change how we keep track of reserved memzones.
With this patch, any memzone with addr NULL is not used, so we also need
to change how we look for the next memzone entry free.
Add new unit test for rte_memzone_free API.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Some unit test are not relevant anymore. It is the case of those malloc
UTs that checked corner cases when allocating MALLOC_MEMZONE_SIZE
chunks, and the case of those memzone UTs relaying of specific free
memsegs of rhte reserved memzone.
Other UTs just need to be update, for example, to calculate maximum free
block size available.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
To unify packet types among all PMDs, bit masks of packet type for
'ol_flags' are replaced by unified packet type.
To avoid breaking ABI compatibility, all the changes would be
enabled by RTE_NEXT_ABI.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The cuckoo hash has a fixed number of entries per bucket, so the
configuration parameter for this is unused. We change this field in the
parameters struct to "reserved" to indicate that there is now no such
parameter value, while at the same time keeping ABI consistency.
Fixes: 48a3991196 ("hash: replace with cuckoo hash implementation")
Suggested-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The original code mistakenly defaulted to X86 when RTE_ARCH_PPC_64 was
left undefined. This did not accommodate other non-PPC/non-X86
architectures. This patch fixes this issue.
Signed-off-by: Cyril Chemparathy <cchemparathy@ezchip.com>
Signed-off-by: Zhigang Lu <zlu@ezchip.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Since now rte_hash structure is private, a new function
has been added to let the user iterate through the hash table,
returning next key and data associated on each iteration,
plus the position where they were stored.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Usually hash tables not only store keys, but also data associated
to them. In order to maintain the existing API, the old functions
will still return the index where the key was stored.
The new functions will return the data associated to that key.
In the case of the lookup_bulk function, it will return also
the number of entries found and a bitmask of which entries
were found.
Unit tests have been updated to use these new functions.
As a final point, a flag has been added in rte_hash_parameters
to indicate if there are new parameters for future versions,
so there is no need to maintain multiple versions
of the existing functions in the future.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
[Thomas: fix || operator in a precondition check]
Added reset function to be able to empty the table,
without having to destroy and create it again.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch replaces the existing hash library with another approach,
using the Cuckoo Hash method to resolve collisions (open addressing),
which pushes items from a full bucket when a new entry tries
to be added in it, storing the evicted entry in an alternative location,
using a secondary hash function.
This gives the user the ability to store more entries when a bucket
is full, in comparison with the previous implementation.
Therefore, the unit test has been updated, as some scenarios have changed
(such as the previous removed restriction).
Also note that the API has not been changed, although new fields
have been added in the rte_hash structure (structure is internal now).
The main change when creating a new table is that the number of entries
per bucket is fixed now, so its parameter is ignored now
(still there to maintain the same parameters structure).
The hash unit test has been updated to reflect these changes.
As a last note, the maximum burst size in lookup_burst function
hash been increased to 64, to improve performance.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add new unit test for calculating the average table utilization,
using random keys, based on number of entries that can be added
until we encounter one that cannot be added (bucket if full).
Also, replace current hash_perf unit test to see performance more clearly.
The current hash_perf unit test takes too long and add keys that
may or may not fit in the table and look up/delete that may not be
in the table. This new unit test gets a set of keys that we know
that fits in the table, and then measure the time to add/look up/delete
them.
Note that performance numbers include time to take a random key
from a pre-made array of keys, plus a quick check of return value.
Also, as stated above, expect higher numbers, as all operations
in the new unit tests will be successful, which means that
it will take more time, than mixing both successful and unsuccesful
operations.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
rte_hash structure should not be a public structure,
and therefore it should be moved to the C file and be declared
as internal. rte_hash_hash implementation is also moved
to the C file, as it uses the structure.
This patch also removes part of a unit test that was checking
a field of the structure.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Refactor the ieee1588_fwd mode in testpmd to use the new ethdev
APIs to enable and read IEEE1588 PTP timestamps.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
In test application, the default size of allocated mempool is calculated
as following:
(RTE_MAX_LCORE * (RTE_MEMPOOL_CACHE_MAX_SIZE + max_kept_objects)) - 1
The objective is to ensure that all cores can fill their cache and keep
'max_kept_objects' at the same time. As RTE_MAX_LCORE is 128 and
RTE_MEMPOOL_CACHE_MAX_SIZE is 512 in the default configuration, it can
produce very large mempools (170 MB).
We can replace the number of core by a dynamic value, which drastically
reduces the amount of memory needed for this test (5 MB with 4 cores).
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
As querying hash key size in byte was supported, it can be shown
in testpmd after getting the device information if not zero.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch extends flow director commands to support l2_payload flow type.
Test report: http://dpdk.org/ml/archives/dev/2015-June/020238.html
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This path renames the mirror type in rte_eth_mirror_conf and macros,
and rework the mirror set in ixgbe drivers by using new definition.
It also fixes some coding style.
Test report: http://dpdk.org/ml/archives/dev/2015-June/019118.html
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Rename rte_eth_vmdq_mirror_conf to rte_eth_mirror_conf and move
the maximum rule id check from ethdev level to driver.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
If double vlan is detected, its stripped flag and vlan tags can be
printed on rxonly mode. Test command of 'tx_vlan set' is expanded
to set both single and double vlan tags on TX side for each packets
to be sent out.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch simply applies the transform previously committed in
scripts/cocci/mtod-offset.cocci. No other modifications have been
made here.
Signed-off-by: Cyril Chemparathy <cchemparathy@ezchip.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Not packing this causes -Wcast-align breakage on machines that are
strict on alignment. This patch fixes this bug.
Signed-off-by: Cyril Chemparathy <cchemparathy@ezchip.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
On machines that are strict on pointer alignment, current code breaks
on GCC's -Wcast-align checks on casts from narrower to wider types.
This patch introduces new unaligned_uint(16|32|64)_t types, which
correctly retain alignment in such cases. Strict alignment
architectures will need to define CONFIG_RTE_ARCH_STRICT_ALIGN in
order to effect these new types.
Signed-off-by: Cyril Chemparathy <cchemparathy@ezchip.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This patch adds a new auto-test for testing the scaling
of concurrent inserts into rte_hash when protected by
the normal spinlock vs. the spinlock with HTM lock
elision. The test also benchmarks single-threaded
access without any locks.
Signed-off-by: Roman Dementiev <roman.dementiev@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Some test rules had equal priority for the same category.
That can cause an ambiguity in build trie and test results.
Specify different priority value for each rule from the same category.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Added new test that verifies that rte_jhash_1words,
rte_jhash_2words and rte_jhash_3words return the same
values as rte_jhash.
Note that this patch has been added after the update
of the jhash function because these 3 functions did not
return the same values as rte_jhash before
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Changed name to something more meaningful,
and mark rte_jhash2 as deprecated.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Jenkins hash function was developed originally in 1996,
and was integrated in first versions of DPDK.
The function has been improved in 2006,
achieving up to 35% better performance, compared to the original one.
This patch integrates that code into the rte_jhash library.
It also updates the precalculated hash values in the unit test,
as the code now returns different values (expected).
A final note has been added in release notes for stating
the changes made.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
In order to make sure that the hash functions are returning
the correct values, new tests have been added:
- First test compares precalculated hash values with values calculated
from the existing hash functions.
- Second test compares values returned from rte_jhash2 and rte_jhash,
expecting same return (only for multiple of 4 bytes keys)
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
In order to see more clearly the performance difference
between different hash functions, order of the loops
have been changed, so it iterates first through initial values,
then key sizes and then the hash functions.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Previous key sizes used for testing did not have much purpose.
This patch substitutes them with some more meaninful
(standard multiple of 2 key sizes, plus IPv4/v6 tuple and others)
Also an arbitrary initial value has been added to increase
the test coverage, and RTE_DIM macro is used to iterate the loops.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Cycles per hash calculation were measured per single operation.
It is much more accurate to run several iterations between measurements
and divide by number of iterations.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch moves hash function performance tests to a separate file,
so user can check performance of the existing hash functions quicker,
without having to run all the other hash operation performance tests,
which takes some time.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This change returns a system error code if tests fail when
running any of the "make test" targets.
This allows the tests to report failures while running in
continuous integration environments.
Previously "make test" returned $? == 0 for all combinations
of success, failure and exception conditions.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Each test requires a certain minimal amount of memory.
Spreading memory on all sockets means that the test will get less memory than
what it wanted on multi sockets system.
So replace all_sockets() with per_sockets().
Also doubled memory on group_5 as current requirement is not enough.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
This variable has undefined values in some cases.
Fixes: 422a20a4e6 ("app/testpmd: fix uninitialized flow control variables")
Signed-off-by: Ding Zhi <zhi.ding@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
[Thomas: split lines to conform with guidelines]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Set the IP source and destination addresses in the IP header of the
ICMP reply as follows:
- Use the request IP source address as the reply IP destination address
- If the request IP destination address is a multicast IP address
- choose a reply IP source address different from the request IP
source address,
- re-compute the IP header checksum.
Otherwise
- switch the request IP source and destination addresses in the
reply,
- keep the IP header checksum unchanged.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Add the new interactive command:
mcast_addr add|remove X <mcast_addr>
to add/remove the multicast MAC address <mcast_addr> to/from the set of
multicast addresses filtered by port <X>.
Command used to test the function "rte_eth_dev_set_mc_addr_list"
that has been added to the API of PMDs.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Fix trailing whitespace, space before tab and empty lines at end of file.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
[Thomas: fix indent and alignment in test_acl.h and test_sched.c]
ICMP echo replies with invalid checksums may be dropped by network nodes or
ignored by the ping utility.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
In the icmpecho forwarding mode, ARP replies from testpmd contain
invalid zero-filled MAC addresses. This is broken since the commit below.
Fixes: 31db4d38de ("net: change arp header struct declaration")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
Add a new top-level "drivers" directory to which all PMDs will be moved
for easier maintenance of both lib folder and drivers themselves. This
new directory is a dependency of all the apps in the app folder, so
the makefiles for each app are updated.
To the new top-level directory add a "net" subdirectory to classify
more specifically our existing PMDs as ethernet drivers
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
[Thomas: fix dependencies and merge several patches]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Latest mbuf changes (priv_size addition and related fixes)
exposed small problem with testpmd and few other sample apps:
when mbuf size is exaclty 2KB or less, that causes
ixgbe PMD to select scattered RX even for configs with 'normal'
max packet length (max_rx_pkt_len == ETHER_MAX_LEN).
To overcome that problem and unify the code, new macro was created
to represent recommended minimal buffer length for mbuf.
When appropriate, samples are updated to use that macro.
Fixes: dfb03bbe2b ("app/testpmd: use standard functions to initialize
mbufs and mbuf pool")
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The distributor header file includes the mbuf header file, but it does not
need to do so as it only uses pointers to the struct rte_mbuf type, and
does not use any of the mbuf internals, nor any of the mbuf functions or
macros. Therefore the inclusion is unnecessary, and can be replaced by a
forward declaration of the mbuf type.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Verify that we can attach a mbuf to another one that does not have
the same data room size and priv_size.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Check that the data in the cloned mbuf is the same than in the
reference mbuf.
Check that the reference counter is incremented for each segment.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
It's better to name the mbuf 'm' instead of 'mc' as it's not a clone.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
When it's possible, use the new helper to create the mbuf pools.
Most of the patch is trivial, except for the following files that
have some specifics (indirect mbufs):
- ip_fragmentation
- ip_pipeline
- ipv4_multicast
- vhost
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The rte_pktmbuf_pool_init() and rte_pktmbuf_init() functions now
support to have a non-hardcoded buffer length. We can remove the
specific functions used in testpmd and replace them by the standard
ones.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Deduct the mbuf data room size from mempool->elt_size and priv_size,
instead of using an hardcoded value that is not related to the real
buffer size.
To use rte_pktmbuf_pool_init(), the user can either:
- give a NULL parameter to rte_pktmbuf_pool_init(): in this case, the
private size is assumed to be 0, and the room size is
mp->elt_size - sizeof(struct rte_mbuf).
- give the rte_pktmbuf_pool_private filled with appropriate
data_room_size and priv_size values.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The PCI device id table is immutable and should be made const
in all drivers. The pseudo drivers can initialize their local
copy as necessary.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
To initialize a structure with zeros, one field was explicitly set
to avoid "missing initializer" bug with old GCC (e.g. 4.4).
This warning is now disabled (commit <insertlater>) for old versions of GCC,
so the workarounds may be removed.
These initializers should not be needed for static variables but they
are still used to workaround an ICC bug (see commit b2595c4aa9).
There is one remaining exception where {0} initializer doesn't work cleanly,
even with recent GCC:
lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c:735:9:
error: missing braces around initializer [-Werror=missing-braces]
struct rte_mbuf mb_def = {0}; /* zeroed mbuf */
Tested with gcc-4.4.7 (CentOS), gcc-4.7.2 (Debian), gcc-4.9.2 (Arch),
clang-3.6.0 and icc-13.1.1.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: John McNamara <john.mcnamara@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Vlad Zolotarov <vladz@cloudius-systems.com>
The ethernet device ops function table should be made const for
safety and security.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The test PMD uses a special type of eth_dev_ops to test features.
Rather allocating this separately, just put in the private data area.
This allows for next change to make dev_ops const.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
rte_free like Glibc free allows rte_free(NULL) as null operation.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Remove useless memset, since dev_private is created by rte_zmalloc
it must already be zero.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Document the functions introduced by commit 64fc36064d.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
After the last enabled port has been seen, and the last time we
evaluate the loop condition, there is an out of bounds read in
ports[p].enabled because p is equal to size, which is the length of
ports.
Signed-off-by: Julien Cretin <julien.cretin@trust-in-soft.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Option var-tracking-assignments supported in gcc from 4.4.
Add gcc version check wil fix this issue.
error: unrecognized command line option "-fno-var-tracking-assignments"
Fixes: 74adbc5ef7 ("app/test: disable variable tracking assignment for memcpy")
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Build app/test will be failed for function only defined but not used.
test_prefetch.c:65: error: ‘testfn_prefetch_cmd’ defined but not used
Add attribute used in test function declaration can fix this.
static void __attribute__((used)) testfn_##t(void);
Fixes: 727909c592 ("app/test: introduce dynamic commands list")
Signed-off-by: Marvin Liu <yong.liu@intel.com>
When port id is RTE_PORT_ALL, port_id_is_invalid will also return zero.
So this function will only set ports[255] need_reconfig flag, other ports will
be skipped.
Fixes: edab33b1c0 ("app/testpmd: support port hotplug")
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
Fix a warning when the rte_common.h header is included in a compilation
using -Wbad-function-cast, such as in Open vSwitch where the
following warning is emitted repeatedly:
../rte_common.h: In function 'rte_is_aligned':
../rte_common.h:184:9: warning: cast from function call of
type 'uintptr_t' to non-matching type 'void *' [-Wbad-function-cast]
This change fixes the issue in rte_common.h by using the RTE_ALIGN_FLOOR
macro to get the aligned floor value with generic type casting.
Also removed the rte_align_floor_int() function and replaced it with
the RTE_PTR_ALIGN_FLOOR() macro.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
testpmd parameter "nb-port" mean the number of forwarding port.
It's incorrect to use function port_id_is_invalid to check number of ports.
Fixes: edab33b1c0 ("app/testpmd: support port hotplug")
Signed-off-by: Yong Liu <yong.liu@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Ixgbe doesn't support the ipv4-frag and ipv6-frag flow types, remove them.
Ixgbe doesn't support configure flex mask on each kind of flow type, this
patch uses RTE_ETH_FLOW_UNKNOWN to specify global flex mask setting.
This patch also changes the string "raw" to "none" to indicate flex mask
setting unrelated with flow type in testpmd for ixgbe.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
When user quits testpmd, and there is traffic being forwarded,
that may produce a segmentation fault, due to ports being closed,
while they are still transmitting packets.
This patch prevents the issue from happening,
by stopping packet forwarding before closing the ports.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
There is no remaining reference to E_RTE_NO_TAILQ.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
This register system makes it possible to reserve a tailq for the dpdk
libraries.
The "dynamic" tailqs are right after the "static" tailqs in shared mem.
Primary process is responsible for writing the tailq names, so that secondary
processes can find them.
This is a temp commit, "static" tailqs are removed after conversion of all
users in next commits.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The "reserve" macros and functions do not check if the requested entry is free.
They do nothing more than the lookup function (which itself "creates" entries
...).
The rte_tailq api is marked as "internal use" in documentation and these macros
are only used in test application, so just get rid of them.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
test_hash.c: In function ‘test_crc32_hash_alg_equiv’:
error: format ‘%lu’ expects argument of type ‘long unsigned int’,
but argument 2 has type ‘size_t’ [-Werror=format]
According to C99, for size_t type should use format "%zu"
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch enables testpmd user can config port hw_vlan with more fine granularity:
hw vlan filter, hw vlan strip, and hw vlan extend.
Don't remove the original command(hw-vlan) considering that some user still want to use
only one command to switch on/off all 3 options.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch modifies testpmd behavior when setting:
rx_vlan add all vf_port (enabling all vlanids
to be passed thru rx filter on VF).
Rx_vlan_all_filter_set() function,
checks if the next vlanid can be enabled by the driver.
Number of vlanids is limited by the NIC and thus the NIC
do not allow to enable more vlanids than it can allocate
in VFTA table.
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
When invoking creation of bonded device using:
create bonded device mode socket in testpmd the bonded port was not
enabled at the end of cmd_create_bonded_device_parsed function.
This caused commands 'show port info' and 'show port stats' not working
properly with bonding device. This patch fixed it.
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Currently, if try to start/stop/close one invalid port,
no error shows in testpmd.
This is a bug, need check the port number.
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: Tetsuya Mukawa <mukawa@igel.co.jp>
As hotplug has been enabled, start the testpmd with no nic binded
will show one error log "Please stop the ports first":
Interactive-mode selected
Please stop the ports first
Done
testpmd>
This issue is cause by the logic of check link status.
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The malloc family returns void * and therefore cast is unnecessary.
Use calloc rather than zmalloc with multiply for array.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
If testpmd is invoked with portmask option like below, segmentation
fault will occur. This patch fixes the issue.
Reported-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The patch introduces following commands.
- port attach [ident]
- port detach [port_id]
- attach: attaching a port
- detach: detaching a port
- ident: pci address of physical device.
Or device name and parameters of virtual device.
(ex. 0000:02:00.0, eth_pcap0,iface=eth0)
- port_id: port identifier
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
This new parameter is needed to keep device type like PCI or virtual.
Port detaching processes are different between PCI device and virtual
device.
RTE_ETH_DEV_PCI indicates device type is PCI. RTE_ETH_DEV_VIRTUAL
indicates device is virtual.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
New function test_crc32_hash_alg_equiv() checks whether software,
4-byte operand and 8-byte operand versions of CRC32 hash function
implementations return the same result value.
Signed-off-by: Yerden Zhumabekov <e_zhumabekov@sts.kz>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Main code changes:
1. Added more typical data points for a thorough performance test
2. Added unaligned test cases since it's common in DPDK usage
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Removed unnecessary test cases for base move functions
since the function "func_test" covers them all.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
VTA is for debugging only, it increases compile time and binary size,
especially when there're a lot of inlines.
So disable it since memcpy test contains a lot of inline calls.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
- API rte_timer_reset() should return -1 when the timer is in the
RUNNING or CONFIG state. Instead, it ignores the return value of
internal function __rte_timer_reset() and always returns 0.
We change rte_timer_reset() to return the value returned by
__rte_timer_reset().
- Enhance timer stress test 2 to report how many timer reset
collisions occur, i.e., how many times rte_timer_reset() fails
due to a timer being in the CONFIG state.
Signed-off-by: Robert Sanford <rsanford2@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
In test_sched, we are missing NULL pointer checks after create_mempool()
and rte_pktmbuf_alloc(). Add in these checks using TEST_ASSERT_NOT_NULL macros.
VERIFY macro was removed and replaced by standard test ASSERTS from "test.h" header.
This provides additional information to track when the failure occurred.
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Following commit c07691ae10, an implicit change has been done in the
devargs API.
This triggers problem in virtual pmds that did not check for parameters
validity as it was implicitely valid.
Fix this by restoring the empty argument as "" and add a note in the api.
Restore associated tests.
Fixes: c07691ae10 ("devargs: remove limit on parameters length")
Reported-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Tested-by: Tetsuya Mukawa <mukawa@igel.co.jp>
The 'callbacks' member of the rte_eth_dev structure has been renamed
to 'link_intr_cbs' to make it clear that it refers to callbacks from
NIC interrupts. This allows us to add other types of callbacks to
the structure without ambiguity.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch removes all references to RTE_MBUF_REFCNT, setting the refcnt
field in the mbuf struct permanently.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Since rte_hash_crc() can now be run regardless of SSE4.2 support,
we can safely remove compile checks for RTE_MACHINE_CPUFLAG_SSE4_2
in test utilities.
Signed-off-by: Yerden Zhumabekov <e_zhumabekov@sts.kz>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Enhance csum fwd engine based on current TX checksum framework in order
to test TX Checksum offload for NVGRE packet.
It includes:
- IPv4 and IPv6 packet
- outer L3, inner L3 and L4 checksum offload for Tx side.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Extend the "tunnel_filter" command in testpmd to test the RX tunnel filter API for NVGRE packet.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
RSS offloads supported 'ip' and 'udp' only, which did not demonstrate
all of the hardware capabilities. The modifications adds support of
new RSS offloads of 'tcp', 'sctp', 'ether' and 'all'.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
RSS offload types were defined separately for 1/10G and 40G NICs,
and have no relationship with flow types. The modifications are to
unify all RSS offload types for all PMDs. Unified RSS offload types
have new and common names which can be used for any PMD or
applications, and decouple from specific hardwares.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
[Thomas: merge with fm10k]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Flow types was defined actually for i40e hardware specifically,
and wasn't able to be used for defining RSS offload types of all
PMDs. It removed the enum flow types, and uses macros instead
with new names. The new macros can be used for defining RSS
offload types later. Also modifications are made in i40e and
testpmd accordingly.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
[Thomas: merge with new flow director API]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Following commands of syn filter are removed:
- add_syn_filter (port_id) priority (high|low) queue (queue_id)
- remove_syn_filter (port_id)
- get_syn_filter (port_id)
New command is added for syn filter by using filter_ctrl API and new
syn filter structure:
- syn_filter (port_id) (add|del) priority (high|low) queue (queue_id)
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Following commands of flex filter are removed:
- add_flex_filter (port_id) len (len_value) bytes (bytes_string) mask (mask_value)
priority (prio_value) queue (queue_id)
- remove_flex_filter (port_id) index (idx)
- get_flex_filter (port_id) index (idx)
New command is added for flex filter by using filter_ctrl API and new flex filter structure:
- flex_filter (port_id) (add|del) len (len_value) bytes (bytes_value) mask (mask_value)
priority (prio_value) queue (queue_id)
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch sets the default value of flow director's mask.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch removes the flexbytes_offset from rte_fdir_conf, because
the flexible payload setting is done by flex_conf instead of flexbytes_offset.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Added 4 unit tests checking link bonding mode 6 behavior.
Also modified virtual_pmd so it is possible to provide packets,
that should be received with rx_burst and to inspect packets
transmitted by tx_burst.
In packet_burst_generator.c function creating eth_header is
modified, so it accepts ether_type as a parameter and function
creating arp_header is added. Updated other unit tests to get
rid of compilation errors.
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This patch modify mode older name from
BONDING_MODE_ADAPTIVE_TRANSMIT_LOAD_BALANCING to BONDING_MODE_TLB
This patch also changes order of TEST_ASSERT macro in
test_tlb_verify_slave_link_status_change_failover.
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Changed MAC address type from uint8_t[6] to struct ether_addr and IP
address type from uint8_t[4] to uint32_t to make it consistent with
other DPDK code using MAC and IP addresses. It allows us to use
is_same_ether_addr and ether_addr_copy functions on MAC addresses in ARP header. Also
removed union from arp_hdr struct to make calls to arp_data items
shorter. Updated test-pmd to match new arp_hdr version.
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
[Thomas: doxygenize comments]
rx_fc_en and tx_fc_en in cmd_link_flow_ctrl_set_parsed
could be used without being initialized.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch links test application against librte_pmd_ring.so for shared
libraries. It's required as long as librte_pmd_ring provides some additional
routines used for testing purposes and must be "hard-linked".
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This patch adds unit tests for mode 4. It is split into separate
file to avoid problems with other modes that does not need to
look into packets payload.
This patch includes also a modification of maximum number of ports
used in their tests for bonding modes 0-3 from 16 to 6.
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Adding new reorder unit test for the test app.
The command to run the unit test from the test shell is: reorder_autotest
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Add missing free for devargs->args and fix tests.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The l4_len has also to be copied in mbuf in case we are offloading outer
IP checksum. Currently, TSO + outer checksum is not supported by any
driver but it will soon be supported by i40e.
Reported-by: Jijiang Liu <jijiang.liu@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Add support for Ethernet over GRE and IP over GRE tunnels.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Move code parsing vxlan into a function. It will ease the support
of GRE tunnels and IPIP tunnels in next commits.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
To simplify the API of parse_* functions, store all the offload
information for the current packet in a structure.
No functional change.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
These functions may be used to parse encapsulated layers
when we will support IP over GRE tunnels.
No functional change.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
The tx_checksum command concerns outer IP checksum, not VxLAN checksum.
Actually there is no checkum in VxLAN header, there is one checksum in
outer IP header, and one checksum in outer UDP header. This option only
controls the outer IP checksum.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Add a new command related to csum forward engine:
csum parse-tunnel (on|off) (tx_port_id)
If enabled, the tunnel packets received by the csum forward engine are
parsed and seen as "outer-headers/inner-headers/data".
If disabled, the parsing of the csum forward engine stops at the first
l4 layer. A tunnel packet is seens as "headers/data" (inner headers are
included in payload).
Note: the port argument is the tx_port. It's more coherent compared
to all other testpmd csum flags.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
No functional changes in this commit, we just move the code
that displays the csum forward engine configuration in a
function.
This makes the next commit easier to read as it will also
use this function.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Replace the "tx_checksum" command by "csum". It has several
advantages:
- it's more coherent with the forward engine name
- it's shorter
- the next commit will introduce a command that is related to
the csum forward engine, but about rx side.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Since previous commit, the flag PKT_TX_UDP_TUNNEL_PKT is not used by any PMD,
remove it from mbuf API and from csumonly (testpmd). In csumonly, the
PKT_TX_OUTER_IP_CKSUM flag is already set for vxlan checksum, providing
enough information to the underlying driver.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Function to get rx/tx port configuration from the PMDs
was added in previous release to simplify the port configuration
in all sample apps, but testpmd was not modified.
This patch makes testpmd get the default rx/tx port configuration,
but still uses the parameters passed by the command line.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Testpmd has the capability of changing the forwarding cores and ports in runtime.
If these are changed when forwarding, two issues may be encountered:
- If "show config fwd" is used, changes made in the core list are applied.
Therefore, trying to stop forwarding may hang testpmd,
since it could be waiting for cores to stop that are not actually running anything
- If the port list is changed, when stopping forwarding,
it may miss the stats of some of the ports that were actually being used.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Ring threshold parameters an RX/TX queue (pthresh, wthresh and hthresh)
had an incorrect range of values shown in help command line.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Several parameters were being parsed twice in testpmd,
so this patch gets rid of the second parsing.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
The port number type should be consistent with librte_cmdline,
else there is potential endian issue.
Signed-off-by: Xuelin Shi <xuelin.shi@freescale.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The Link bonding library is incorrectly using receive packet type flags
in the transmit policy hashing functions, which would cause packets
generated locally to be incorrectly distributed across the slave
devices. This patch completely removes the dependency on the packet
type flags and uses the ether_type from either the Ethernet header or
the VLAN headers for branching.
This patch also includes the associate changes in the test suite and in
the packet_burst_generator code to remove the dependences on the packet
type flags.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
This is a duplication of some EAL parts for a standalone packaging
which is not documented.
Packaging should be done outside of DPDK.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
If at build phase we don't make any trie splitting,
then temporary build structures and resulting RT structure might be
much bigger than current.
>From other side - having just one trie instead of multiple can speedup
search quite significantly.
>From my measurements on rule-sets with ~10K rules:
RT table up to 8 times bigger, classify() up to 80% faster
than current implementation.
To make it possible for the user to decide about performance/space trade-off -
new parameter for build config structure (max_size) is introduced.
Setting it to the value greater than zero, instructs rte_acl_build() to:
- make sure that size of RT table wouldn't exceed given value.
- attempt to minimise number of tries in the table.
Setting it to zero maintains current behaviour.
That introduces a minor change in the public API, but I think the possible
performance gain is too big to ignore it.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
In test-acl replace command-line option "--scalar" with new one:
"--alg=scalar|sse|avx2".
Allows user manually select preferred classify() method.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Make sure that test_acl would not ignore error conditions.
Run classify() with all possible values.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Following commands of ethertype filter are removed:
- add_ethertype_filter (port_id) ethertype (eth_value)
- remove_ethertype_filter (port_id) index (idx)
- get_ethertype_filter (port_id) index (idx)
New command is added for ethertype filter by using filter_ctrl API and new
ethertype filter structure:
- ethertype_filter (port_id) (add|del) (mac_addr|mac_ignr)
(mac_address) ethertype (ether_type) (drop|fwd) queue (queue_id)
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Set VMDq RSS mode if it has VF (VF number is more than 1) and has RSS information.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Reviewed-by: Vlad Zolotarov <vladz@cloudius-systems.com>
There were two static functions called "parse_item_list" in testpmd app.
Since one was a superset of the functionality of the other, we can
collapse the two calls down into a single one, shared between the two
C files.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch contains a fix for link bonding handling of vlan tagged packets in mode 3 and 5.
Currently xmit_slave_hash function misinterprets the PKT_RX_VLAN_PKT flag to mean that
there is a vlan tag within the packet when in actually means that there is a valid entry
in the vlan_tci field in the mbuf.
- Fixed VLAN tag support in hashing functions.
- Adds support for TCP in layer 4 header hashing.
- Splits transmit hashing function into separate functions for each policy to
reduce branching and to make the code clearer.
- Fixed incorrect flag set in test application packet generator.
Test report: http://dpdk.org/ml/archives/dev/2015-January/010792.html
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SunX Jiajia <sunx.jiajia@intel.com>
One occurrence call to strncmp had the closing brace in the wrong
place. Changing this form:
if (strncmp(X, Y, sizeof(X) != 0))
which does a comparison of length 1, to
if (strncmp(X, Y, sizeof(X)) != 0)
which does the correct length comparison and then compares the result
to zero in the "if" part.
Seen with clang-3.5:
"error: size argument in 'strncmp' call is a comparison"
This patch is similar to 261386248 but it looks that one occurrence
was forgotten.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
One of the test assertion macros was missing the "do" part of the
do-while. This issue was picked up by clang reporting an empty while
loop body for the closing while of the do-while pair.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
If mbuf allocation failed for whatever reason, we would get a NULL
pointer exception in test_table_acl.c:test_pipeline_single_filter test
case.
We fix this by causing an early break out of the application loop. If we
quit the test immediately we would leak any existing allocated mbufs,
but by breaking instead, we allow the test to continue and clean up the
mbufs already in the pipeline, while still having a test failure as the
mbuf counts should not match.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
In the kvargs test cases, we were checking for errors by checking if the
returned pointer value was NULL. In the error handling, we then tried to
free back the NULL pointer, which would cause a crash.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Since commit a155d4301 "support link bonding device initialization",
EAL probes drivers to the PCI devices in rte_eal_init,
then PCI resources are mapped if a device
is bound to igb_uio driver, for instance.
Therefore, test app probes all the devices and multiprocess unit test
tries to map resources twice in the secondary processes, and test fails,
caused by RTE_PCI_DRV_NEEDED_MAPPING flag in dummy pci driver my_driver2.
Test is fixed by setting the driver flags to 0.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The port mask parsing in testpmd allowed up to 64 bits to be processed,
even if RTE_MAX_ETHPORTS is set to a max of 32. Fix this by only
processing up to min(RTE_MAX_ETHPORTS,64) bits of the mask.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Some applications doesn't have the pcap link flag
when shared libraries are enabled.
Indeed in such case, pcap PMD must not be linked but pcap library should.
Actually -lpcap is always needed if pcap PMD is used,
and -lrte_pmd_pcap must be set only with static PMD library.
So the flags -lrte_pmd_pcap and -lpcap are enabled separately.
Workarounds in test-pmd/ and test-pipeline/ can be removed.
Reported-by: Stepan Sojka <stepan.sojka@adaptivemobile.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Since commit b91c67e5a6,
maximum number of cores is 128, which has increase
the total memory necessary for a rte_mempool structure,
as the per-lcore local cache has been doubled in size.
Therefore, eal_flags unit test was broken since it needed
to use more hugepages.
Increased memory to 18MB, as that is the actual minimum memory necessary
(depending on the physical memory segments, DPDK may need less memory)
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Adding call to mac_address_slaves_update from the lsc handler when the
first slave become active to propagate any mac changes made while
devices are inactive
Changed removing slave logic to use memmove instead of memcpy to move
data within the same array, as this was corrupting the slave array.
Adding unit test to cover failing assignment scenarios
Test report: http://dpdk.org/ml/archives/dev/2014-December/009623.html
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SunX Jiajia <sunx.jiajia@intel.com>
The name of the rte_eth_fdir_flow's rte_eth_ipv6_flow attribute,
'ip6_flow', clashes with a macro defined in
/usr/include/netinet/ip6.h, such that when DPDK is linked with an
application that uses the afforementioned header, the macro is
expanded within the DPDK struct, causing a compilation error.
Rename the relevant attribute in DPDK to resolve this.
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
In order not to affect the FVL's performance by default setting, this
patch moves the flow director initialization from i40e_pf_setup to
i40e_dev_configure according to the mode in fdir configure info.
Then the resources used for flow director will be only setup if it is enabled.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Replace the inner_l2_len and the inner_l3_len field with the
outer_l2_len and outer_l3_len field, and rework csum forward engine
and i40e PMD due to these changes.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Replace PKT_TX_VXLAN_CKSUM with PKT_TX_UDP_TUNNEL_PKT in order to indicate
a packet is an UDP tunneling packet, and introduce 3 TX offload flags for
outer IP TX checksum, which are PKT_TX_OUTER_IP_CKSUM, PKT_TX_OUTER_IPV4
and PKT_TX_OUTER_IPV6 respectively.
Rework csum forward engine and i40e PMD due to these changes.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Use endianness detection factorized in EAL.
The comment about arpa/inet.h is not valid anymore since
commit d07180f211 ("net: fix conflict with libc").
The macro _htons could also be moved in rte_byteorder.h
by providing some constant byte swapping.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
When using test-pmd with flow director in FreeBSD, the application will
segfault/Bus error while parsing the command-line. This is due to how
each commands result structure is represented during parsing, where the offsets
for each tokens value is stored in a character array(char result_buf[BUFSIZ])
in cmdline_parse()(./lib/librte_cmdline/cmdline_parse.c).
The overflow occurs where BUFSIZ is less than the size of a commands result
structure, in this case "struct cmd_pkt_filter_result"
(app/test-pmd/cmdline.c) is 1088 bytes and BUFSIZ on FreeBSD is 1024 bytes as
opposed to 8192 bytes on Linux.
The problem can be reproduced by running test-pmd on FreeBSD:
./testpmd -c 0x3 -n 4 -- -i --portmask=0x3 --pkt-filter-mode=perfect
And adding a filter:
add_perfect_filter 0 udp src 192.168.0.0 1024 dst 192.168.0.0 1024 flexbytes
0x800 vlan 0 queue 0 soft 0x17
This patch removes the OS dependency on BUFSIZ and defines and uses a
library #define CMDLINE_PARSE_RESULT_BUFSIZE 8192
Added boundary checking to ensure this buffer size cannot overflow, with
an error message being produced.
Suggested-by: Olivier Matz <olivier.matz@6wind.com>
http://git.droids-corp.org/?p=libcmdline.git;a=commitdiff;h=b1d5b169352e57df3fc14c51ffad4b83f3e5613f
Signed-off-by: Alan Carew <alan.carew@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
Compiling with clang on FreeBSD gave a compilation error:
app/test-pmd/csumonly.c:84:5: fatal error: '__BYTE_ORDER' is not defined, evaluates to 0 [-Wundef]
Querying the preprocessor defines show both the define and value used
are incorrect.
$ clang -dM -E - < /dev/null | grep BYTE
\#define __BYTE_ORDER__ __ORDER_LITTLE_ENDIAN__
Changing the check to __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__ then
resolves the issue.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The definition value for IPPROTO_DIVERT protocol uses a value
which is out of range of the uint8_t type, giving clang compiler
errors on FreeBSD.
app/test-pmd/icmpecho.c:231:7: fatal error: overflow converting case value
to switch condition type (258 to 2) [-Wswitch]
case IPPROTO_DIVERT: /**< divert pseudo-protocol */
This is fixed by having the code to return the protocol name
use the uint16_t type for the protocol value input.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This Patch add unit tests for mode 5 - tlb - to the oders
link bonding unit tests.
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
It was impossible to include netinet/in.h and rte_ip.h
because the IP protocols were redefined.
It is removed because useless.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
Since commit 8a387fa85f ("ethdev: more RSS flags") in DPDK 1.7,
RSS flags have increased.
According to rss_hf definition in rte_eth_rss_conf, it shall be uint64 type.
Using uint16 will get truncated value, and cause incorrect output. This
fix corrected this issue.
Signed-off-by: Jia Yu <jyu@vmware.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
CACHE_LINE_SIZE is a macro defined in machine/param.h in FreeBSD and
conflicts with DPDK macro version.
Adding RTE_ prefix to avoid conflicts.
CACHE_LINE_MASK and CACHE_LINE_ROUNDUP are also prefixed.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
[Thomas: updated on HEAD, including PPC]
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
This patch fixes compiling problems on IBM Power architecture and turn
on the test-pmd compiling option in configuration file. Actually, this
is an big endian compiling fix.
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Curent implementation in test_memzone.c has bugs in finding the
second smallest memory segment. It's the last smallest memory segment,
but it's not the second smallest memory segment. This bug may cause test
failure in some cases. This patch fixes this bug.
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@6wind.com>
IBM Power architecture has different huge page sizes (16MB, 16GB) than
x86.This patch defines RTE_PGSIZE_16M and RTE_PGSIZE_16G in the
rte_page_sizes enum variable and adds huge page size support of DPDK
for IBM Power architecture.
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@6wind.com>
IBM Power architecture has different cache line size (128 bytes) than
x86 (64 bytes). This patch defines CACHE_LINE_SIZE to 128 bytes to
override the default value 64 bytes to support IBM Power Architecture.
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@6wind.com>
IBM Power processor doesn't have CPU flag hardware registers. This patch
uses aux vector software register to get CPU flags and add CPU flag
checking support for IBM Power architecture.
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@6wind.com>
If the user specifies 'set verbose 1' in testpmd command line,
the csum forward engine will dump some informations about received
and transmitted packets, especially which flags are set and what
values are assigned to l2_len, l3_len, l4_len and tso_segsz.
This can help someone implementing TSO or hardware checksum offload to
understand how to configure the mbufs.
Example of output for one packet:
--------------
rx: l2_len=14 ethertype=800 l3_len=20 l4_proto=6 l4_len=20
tx: m->l2_len=14 m->l3_len=20 m->l4_len=20
tx: m->tso_segsz=800
tx: flags=PKT_TX_IP_CKSUM PKT_TX_TCP_SEG
--------------
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Add two new commands in testpmd:
- tso set <segsize> <portid>
- tso show <portid>
These commands can be used enable TSO when transmitting TCP packets in
the csum forward engine. Ex:
set fwd csum
tx_checksum set ip hw 0
tso set 800 0
start
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Some of the NICs supported by DPDK have a possibility to accelerate TCP
traffic by using segmentation offload. The application prepares a packet
with valid TCP header with size up to 64K and deleguates the
segmentation to the NIC.
Implement the generic part of TCP segmentation offload in rte_mbuf. It
introduces 2 new fields in rte_mbuf: l4_len (length of L4 header in bytes)
and tso_segsz (MSS of packets).
To delegate the TCP segmentation to the hardware, the user has to:
- set the PKT_TX_TCP_SEG flag in mbuf->ol_flags (this flag implies
PKT_TX_TCP_CKSUM)
- set the flag PKT_TX_IPV4 or PKT_TX_IPV6
- set PKT_TX_IP_CKSUM if it's IPv4, and set the IP checksum to 0 in
the packet
- fill the mbuf offload information: l2_len, l3_len, l4_len, tso_segsz
- calculate the pseudo header checksum without taking ip_len in account,
and set it in the TCP header, for instance by using
rte_ipv4_phdr_cksum(ip_hdr, ol_flags)
The API is inspired from ixgbe hardware (the next commit adds the
support for ixgbe), but it seems generic enough to be used for other
hw/drivers in the future.
This commit also reworks the way l2_len and l3_len are used in igb
and ixgbe drivers as the l2_l3_len is not available anymore in mbuf.
Signed-off-by: Mirek Walukiewicz <miroslaw.walukiewicz@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Introduce new functions to calculate checksums. These new functions
are derivated from the ones provided csumonly.c but slightly reworked.
There is still some room for future optimization of these functions
(maybe SSE/AVX, ...).
This API will be modified in tbe next commits by the introduction of
TSO that requires a different pseudo header checksum to be set in the
packet.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The csum forward engine was becoming too complex to be used and
extended (the next commits want to add the support of TSO):
- no explaination about what the code does
- code is not factorized, lots of code duplicated, especially between
ipv4/ipv6
- user command line api: use of bitmasks that need to be calculated by
the user
- the user flags don't have the same semantic:
- for legacy IP/UDP/TCP/SCTP, it selects software or hardware checksum
- for other (vxlan), it selects between hardware checksum or no
checksum
- the code relies too much on flags set by the driver without software
alternative (ex: PKT_RX_TUNNEL_IPV4_HDR). It is nice to be able to
compare a software implementation with the hardware offload.
This commit tries to fix these issues, and provide a simple definition
of what is done by the forward engine:
* Receive a burst of packets, and for supported packet types:
* - modify the IPs
* - reprocess the checksum in SW or HW, depending on testpmd command line
* configuration
* Then packets are transmitted on the output port.
*
* Supported packets are:
* Ether / (vlan) / IP|IP6 / UDP|TCP|SCTP .
* Ether / (vlan) / IP|IP6 / UDP / VxLAN / Ether / IP|IP6 / UDP|TCP|SCTP
*
* The network parser supposes that the packet is contiguous, which may
* not be the case in real life.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
In testpmd the rte_port->tx_ol_flags flag was used in 2 incompatible
manners:
- sometimes used with testpmd specific flags (0xff for checksums, and
bit 11 for vlan)
- sometimes assigned to m->ol_flags directly, which is wrong in case
of checksum flags
This commit replaces the hardcoded values by named definitions, which
are not compatible with mbuf flags. The testpmd forward engines are
fixed to use the flags properly.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
In test-pmd (rxonly.c), the code is able to dump the list of ol_flags.
The issue is that the list of flags in the application has to be
synchronized with the flags defined in rte_mbuf.h.
This patch introduces 2 new functions rte_get_rx_ol_flag_name()
and rte_get_tx_ol_flag_name() that returns the name of a flag from
its mask. It also fixes rxonly.c to use this new functions and to
display the proper flags.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Updated the unit tests to cover both librte_power implementations as well as
the external API.
Signed-off-by: Alan Carew <alan.carew@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Enable users to specify the lcore id that is used as master lcore.
Signed-off-by: Simon Kuenzer <simon.kuenzer@neclab.eu>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
In current version, used cores can only be specified using a bitmask.
It will now be possible to specify cores in 2 different ways:
- Using a bitmask (-c [0x]nnn): bitmask must be in hex format
- Using a list in following format: -l <c1>[-c2][,c3[-c4],...]
The letter -l can stand for lcore or list.
-l 0-7,16-23,31 being equivalent to -c 0x80FF00FF
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
No need to have different headers for Linux and BSD.
These files are identicals with exception of internal config which has
uio and vfio fields only useful for Linux.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Test command is added to configure flexible payload
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
test command added to configure flexible mask
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Test command is added to flush flow director table
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Extended fdir info is printed in rxonly fwd engine when fdir match.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Commands are added to test adding or deleting flow director filters.
10 flow types in flow director are supported: ipv4, ipv4-frag, tcpv4, udpv4, sctpv4, ipv6, ipv6-frag, tcpv6, udpv6, sctpv6
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
As 40G NIC supports different sizes (128/512/64 entries) of
redirection table from that (128 entries) of 1G and 10G NICs,
support of multiple sizes of redirection table is needed.
It includes,
* Redefine 'struct rte_eth_rss_reta' in ethdev.
- To 'struct rte_eth_rss_reta_entry64' which contains 64
entries and 64 bits mask.
- Array of above new structure can be used for any number of
redirection table entries, as long as the number is multiple
of 64. This is quite flexible for the future expanding of
redirection table.
* Redefinition of relevant interfaces in ethdev.
- Interface of reta update has been redefined with new parameters.
- Interface of reta query has been redefined with new parameters.
* Rework of 1G PMD in igb.
- reta update has been reworked.
- reta query has been reworked.
* Rework of 10G PMD in ixgbe.
- reta update has been reworked.
- reta query has been reworked.
* Rework of 40G PMD (PF only) in i40e.
- reta update has been reworked.
- reta query has been reworked.
* Implement relevant commands in testpmd.
Test report: http://dpdk.org/ml/archives/dev/2014-November/008362.html
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Erlu Chen <erlu.chen@intel.com>
Adding support for lsc interrupt from bonded device to link
bonding library with supporting unit tests in the test application.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: SunX Jiajia <sunx.jiajia@intel.com>
set link-up and set link-down were not included
in the help command.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch fixes two occurrences where a call to strncmp had the closing
brace in the wrong place. Changing this form:
if (strncmp(X,Y,sizeof(X) != 0))
which does a comparison of length 1, to
if (strncmp(X,Y,sizeof(X)) != 0)
which does the correct length comparison and then compares the result to
zero in the "if" part, as the author presumably originally intended.
Reported-by: Larry Wang <liang-min.wang@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
eal_flags and multiprocess unit tests use --file-prefix option
which is not supported in FreeBSD, so it has been removed
if compiled for this OS.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This field is added for librte_distributor. User of librte_distributor
is advocated to set value of mbuf->hash.usr before calling
rte_distributor_process. The value of usr is the tag which stands as
identifier of flow.
Signed-off-by: Qinglai Xiao <jigsaw@gmail.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The unit test can be used to measure cycles per packet in different rx/tx routines.
The NIC works in loopback mode. So it doesn't require test equipment to measure throughput.
As result, the unit test shows the average cycles per packet consuming.
When doing the test, make sure the link is UP.
Usage Example:
1. Run unit test app in interactive mode
app/test -c f -n 4 -- -i
2. Run and wait for the result
pmd_perf_autotest
There's option to choose rx/tx pair, default is vector.
set_rxtx_mode [vector|scalar|full|hybrid]
Note: To get acurate scalar fast, please choose 'vector' or 'hybrid' without INC_VEC=y in config
It supports to measure standalone rx or tx.
Usage Example:
Choose rx or tx standalone, default is both
set_rxtx_anchor [rxtx|rxonly|txonly]
It also supports to measure standalone RX burst cycles.
In this way, it won't repeat re-send received packets.
Now it measures two situations, poll before/after xmit(w or w/o desc. cache conflict)
Usage Example:
Set stream control mode, by default is continuous
set_rxtx_sc [continuous|poll_before_xmit|poll_after_xmit]
Test report: http://dpdk.org/ml/archives/dev/2014-October/007145.html
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Tested-by: Yong Liu <yong.liu@intel.com>
Add support to allow packet burst generator to create packets
in different sizes.
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>