The vid variable name is shorthand for VLAN ID, so we should use this in
comments explaining what is happening.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Tested-by: Heng Ding <hengx.ding@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
The Linux Kernel provides the OS a call "pcie_get_minimum_link" which
can crawl the PCIe tree and determine the actual minimum link speed of a
device which is a more general check than provided by
is_slot_appropriate. Thus, the kernel driver does not use or want the
is_slot_appropriate function call. Add a NO_IS_SLOT_APPROPRIATE_CHECK
definition which can be defined to remove the code.
If left undefined (the default) then the code will all be active and no
driver changes should be necessary.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Tested-by: Heng Ding <hengx.ding@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Use memcpy instead of copying MAC address byte-by-byte.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Tested-by: Heng Ding <hengx.ding@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Using the BIT macro can simplify the bit-shifting operation and make the
code look clean. Similar to how this is handled in the i40e base code,
define a macro for it in DPDK, so it can be used here too.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Tested-by: Heng Ding <hengx.ding@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
"else" is not generally useful after a break or return.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Tested-by: Heng Ding <hengx.ding@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Recommended line length maximum is 80 characters
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Tested-by: Heng Ding <hengx.ding@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Add comments which properly explain the undocumented use of bits in
TDLEN register prior to VF initializing it to the correct value. Note
that the mechanism is entirely software-defined and explain its purpose
to help reduce confusion in the future.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Tested-by: Heng Ding <hengx.ding@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
VF drivers must detect how many queues are available. Previously, the
driver assumed that each VF has at minimum 1 queue. This assumption is
incorrect, since it is possible that the PF has not yet assigned the
queues to the VF by the time the VF checks.
To resolve this, we added a check first to ensure that the first queue
is, in fact, owned by the VF at init_hw_vf time.
However, the code flow did not reset hw->mac.max_queues to 0.
In some cases, such as during reinit flows, we call init_hw_vf
without clearing the previous value of hw->mac.max_queues. Due to this,
when init_hw_vf errors out, if its error code is not properly handled
the VF driver may still believe it has queues which no longer belong to
it. Fix this by clearing the hw->mac.max_queues on exit due to errors.
Fixes: 8b8264bdb9 ("fm10k/base: check VF has a queue")
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Tested-by: Heng Ding <hengx.ding@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Use bitshift instead of a divisor, because this is faster, and
eliminates any need for a '0' check. In our case, this even works
out because default Gen3 will be 0.
Because of this, we are also able to remove the check for non-zero value
in the VF code path since that will already be the default Gen3 case.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Tested-by: Heng Ding <hengx.ding@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Make functions that are only referenced locally static.
Wrap fm10k_msg_data fm10k_iov_msg_data_pf[] in the new ifndef
NO_DEFAULT_SRIOV_MSG_HANDLERS so that drivers with custom SR-IOV
message handlers can strip it.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Tested-by: Heng Ding <hengx.ding@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Since the resultant data type of the mac_update.mac_upper field is u16,
it does not make sense to typecast u8 variables to u32 first.
Fixes: 7223d200c2 ("fm10k: add base driver")
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Tested-by: Heng Ding <hengx.ding@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
The new share code makes fm10k_msg_update_pvid_pf function static, so we
can not refer to it now in fm10k_ethdev.c. The registered PF handler is
almost the same as the default PF handler, removing it has no impact on
mailbox.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Tested-by: Heng Ding <hengx.ding@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Using SSE instructions to parse error flags in HW Rx descriptor,
then set corresponding bits of mbuf.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
When the TX function tries to free a bunch of mbufs, it will free
them one by one. This change will scan the free list and merge the
requests in case they belongs to same pool, then free once, which
will reduce cycles on freeing mbufs.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
fm10k switch core uses source MAC + VID + SGLORT to do
look up in MAC table. If no match, an exception interrupt
will be sent to the switch manager. Too much of this kind
of exception interrupts cause switch manager side high CPU
usage.
To reproduce this issue, one DPDK testpmd runs on a server
with one fm10k NIC, mac forwards test traffic from one of
fm10k ports to another port. The CPU usage for the switch
manager will go up to about 20% for test traffic rate at
10G bps, comparing to near 0% for no test traffic.
This patch fixes this issue. A default SGLORT is assigned
to each TX queue. This default value works for non-VMDq mode
and current VMDq example. For advanced VMDq usage, e.g.
different source MAC address for different TX queue, FTAG
forwarding function could be used to change this default
SGLORT value.
Fixes: 9ae6068c86 ("fm10k: add dev start/stop")
Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
In FM10K, a single PCIe port can derive out a few logical ports,
like SRIOV PF/VF devices, VMDQ objects. To better manage them, FM10K
silicon assigns a Unique GLORT ID to each logical port.
When a logical port sends a broadcast packet, the silicon will flood
it to all logical ports, including the one that sent the broadcast packet.
To prevent this, silicon has an rxq register to store the glort id of
the logical port that queue binds to.
FM10K has a switch core inside, which has a loopback suppression
mechanism in the switch level. Switch level loopback suppression mostly
works for the ether port traffic.
This patch assigns a SGLORT for each RX queue, and enables PCIe port
level loopback suppression.
Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Previous l3fwd-power only processes IP and IPv6 packets, other
packets' mbufs are not freed, and this causes a memory leak.
This patch fixes this issue.
Fixes: 3c0184cc0c ("examples: replace some offload flags with packet type")
Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
When the PF establishes a connection with Switch Manager(SM), it receives
a logical port range from SM, and registers certain logical ports from
that range. Then a default VID will be sent back from the SM.
This whole transaction - finishing with the default VID being set -
needs to be completed before dev_init returns. If not, the interrupt
setting will subsequently be changed in dev_start according to the RX
queue number, and that can cause this transaction to fail.
Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
Interrupt mode framework has per-queue enable/disable functions.
Implement these two functions for fm10k driver.
Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
Previous dev_stop function stops the rx/tx queues. This patch adds logic
to disable rx queue interrupt, clean the datapath event and queue/vector
map.
Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
In interrupt mode, each rx queue can have one interrupt to notify the
application when packets are available in that queue. Some queues
also can share one interrupt.
Currently, fm10k needs one separate interrupt for mailbox. So, only those
drivers which support multiple interrupt vectors e.g. vfio-pci can work
in fm10k interrupt mode.
This patch uses the RXINT/INT_MAP registers to map interrupt causes
(rx queue and other events) to vectors, and enable these interrupts
through kernel drivers like vfio-pci.
Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
rx_descriptor_done is used by interrupt mode example application
(l3fwd-power) to check rxd DD bit to decide the RX trend,
then l3fwd-power will adjust the cpu frequency according to
the result.
Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
In fm10k, PF, VF, VMDQ or queues binding to flow director rule can
be considered as a logical port. Original implementation only creates
a single port for all cases. This change creates 128 logical ports;
first 64 for PF and VMDQ, second 64 for flow director.
Registers DGLORTDEC/DGLORTMAP define rules for how to classify packets
into different queues. Currently only PF and VMDQ cases are considered.
This change add rules for flow director.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
In fm10k_recv_scattered_pkts function, a packet is stored in a linked list,
offload flags such as PKT_RX_VLAN_PKT should be set in the first segment.
Fixes: 6b59a3bc82 ("fm10k: fix VLAN in Rx mbuf")
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
This patch implemented the ops of adding and removing mac
address in i40evf driver. Functions are assigned like:
.mac_addr_add = i40evf_add_mac_addr,
.mac_addr_remove = i40evf_del_mac_addr,
To support multiple mac addresses setting, this patch also
extended the mac addresses adding and deletion when device
start and stop. Each VF can have a maximum of 64 mac
addresses.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Zhe Tao <zhe.tao@intel.com>
VEB switching feature for i40e is used to enable the switching between the
VSIs connect to the virtual bridge. The old implementation is setting the
virtual bridge mode as VEPA which is port aggregation. Enable the switching
ability by setting the loop back mode for the specific VSIs which connect
to PF or VFs.
VEB/VSI/VEPA are concepts not specific to the i40e HW, the concepts are
from 802.1qbg spec
IEEE EVB tutorial:
http://www.ieee802.org/802_tutorials/2009-11/evb-tutorial-draft-20091116_v09.pdf
VEB: a virtual switch can forward the packet based on the specific match
field.
VSI: a virtual interface connect between the VEB/VEPA and virtual machine.
VEPA: a virtual Ethernet port aggregator will upstream the packets from
VSI to the LAN port.
Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch fixes a typo in a comment in the definition of
the i40e_pf struct.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Signed-off-by: Rami Rosen <rami.rosen@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Currently, the example vmdq_dcb only works on Intel(R) 82599 NICs.
This patch extends this sample to make it work both on Intel(R) 82599
and X710/XL710 NICs by making the following changes:
1. add VMDQ base queue checking to avoid forwarding on PF queues.
2. assign each VMDQ pool to a MAC address.
3. add more arguments (nb-tcs, enable-rss) to change the default
setting
4. extend the max number of queues from 128 to 1024.
This patch also reworks the user guide for the vmdq_dcb sample.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Previously, DCB(Data Center Bridging) is only enabled on PF,
queue mapping and BW configuration is only done on PF.
This patch enables DCB for VMDQ VSIs(Virtual Station Interfaces)
by following steps:
1. Take BW and ETS(Enhanced Transmission Selection)
configuration on VEB(Virtual Ethernet Bridge).
2. Take BW and ETS configuration on VMDQ VSIs.
3. Update TC(Traffic Class) and queues mapping on VMDQ VSIs.
To enable DCB on VMDQ, the number of TCs should not be larger than
the number of queues in VMDQ pools, and the number of queues per
VMDQ pool is specified by CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM
in config/common_* file.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
It removes the i40evf_set_mac_type() defined in PMD, and reuses
i40e_set_mac_type() defined in base driver.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
It adds base driver release information such as release date,
for better tracking in the future.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Several structures and macros are added or updated, such
as 'struct i40e_aqc_get_link_status',
'struct i40e_aqc_run_phy_activity' and
'struct i40e_aqc_lldp_set_local_mib_resp'.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
It adds the new AQ command and struct for managing a
thermal sensor.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
X722 supports Expanded version of TCP, UDP PCTYPES for RSS.
Add a Virtchnl offload to support this.
Without this patch VF drivers will not be able to support
the correct PCTYPES for X722 and UDP flows will not fan out.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
This patch adds 7 new register definitions for programming the
parser, flow director and RSS blocks in the HW.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
RX control register read/write functions are added, as directly
read/write may fail when under stress small traffic. After the
adminq is ready, all rx control registers should be read/written
by dedicated functions.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
When updating a VSI, save off the number of allocated and
unallocated VSIs as we do when adding a VSI.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Fix the driver load failure with linking with some
PHY types, as the amount of time it takes for the
GLGEN_RSTAT_DEVSTATE to be set increases greatly on those PHY
types, which can lead to a timeout.
Fixes: 9aeefed055 ("i40e/base: support ESS")
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
In Multi-Function Mode (MFP) particularly when the PF VSI is set
in limited promiscuous mode, the HW switch was still mirroring the
outgoing packets from other VSIs (VF/VMdq) onto the PF VSI.
This sets a new bit to avoid above mirroring, and it is in limited
promiscuous on the PF VSI in MFP which is similar to default port
VSI.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
This patch adds functions to blink led on devices using a new
PHY since MAC registers used in other designs do not work in
this device configuration.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Add the support code for calling the AdminQ API call
aq_set_switch_config.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
With the latest firmware, statistics gathering can now be enabled and
disabled in the HW switch, so we need to add a parameter to allow the
driver to set it as desired. At the same time, the L2 cloud filtering
parameter has been removed as it was never used.
Older drivers working with the newer firmware and newer drivers working
with older firmware will not run into problems with these bits as the
defaults are reasonable and there is no overlap in the bit definitions.
Also, newer drivers will be forced to update because of the change in
function call parameters, a reminder that the functionality exists.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
This patch implements necessary functions related to port
mirroring features such as add/delete mirror rule, function
to set promiscuous VLAN mode for VSI if mirror rule_type is
"VLAN Mirroring".
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Add the use of the new shared MAC filter bit for multicast
and broadcast filters in order to make better use of the
filters available from the device.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
This patch fixes a problem where the NVMUpdate Tool, when
using the PHY NVM feature, gets bad data from the PHY because
of contention on the MDIO interface from get phy capability
calls from the driver during regular operations. The problem
is fixed by adding a check if media is available before calling
get phy capability function because that bit is not set when
device is in PHY interaction mode.
Fixes: 842ea19963 ("i40e/base: save link module type")
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
The device capabilities were defined in two places, and neither had
all the definitions. It really belongs with the AQ API definition,
so this patch removes the other set of definitions and fills out the
missing item.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>