The recently added proxy opcodes should be available only with
X722_SUPPORT, so move them into the #ifdef, and reorder these
to be in numerical order with the rest of the opcodes. Several
structs that were added are unnecessary, so they are removed
here.
Fixes: 788fc17b2d ("i40e/base: support proxy config for X722")
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
The recently added Wakeup On Line (WOL) opcodes should be
available only with X722_SUPPORT, so move them into the #ifdef,
and reorder these to be in numerical order with the rest of the
opcodes. Several structs that were added are unnecessary, so
they are removed here.
Fixes: 3c89193a36 ("i40e/base: support WOL config for X722")
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Add new Device ID's for backplane and QSFP+ adapters, and delete
deprecated one for backplane.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
In one obscure corner case, it was possible to clear the NVM update
wait flag when no update_done message was actually received. This
patch cleans the event descriptor before use, and moves the opcode
check to where it won't get done if there was no event to clean.
Fixes: 8db9e2a1b2 ("i40e: base driver")
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
The standard way to check if the AQ is enabled is to look at
the count field. So it should only set this field after it has
successfully allocated memory.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
It's possible that while waiting for the spinlock, another
entity (that owns the spinlock) has shut down the admin queue.
If it then attempts to use the queue, it will panic.
It adds a check for this condition on the receive side. This
matches an existing check on the send queue side.
Fixes: 8db9e2a1b2 ("i40e: base driver")
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
XL710/X710 devices requires FW version checks to properly handle
DCB configurations from the FW while other devices (e.g. X722)
do not, so limit these checks to XL710/X710 only.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
In X722, NVM reads can't be done through SRCTL registers.
And require AQ calls, which require grabbing the NVM lock.
Unfortunately some paths need the lock to be acquired once
and do a whole bunch of stuff and then release it.
This patch creates an unsafe version of the read calls, so
that it can be called from the paths that need the bulk access.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Instead of doing the MAC check, use a flag that gets set per
MAC. This way there are less chances of user error and it
can enable multiple MACs with the capability in a single place
rather than cluttering the code with MAC checks.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
SW needs to acquire the NVM ownership before issuing an AQ read
to the X722 NVM otherwise it will get EBUSY from the firmware.
Also it should be released when done.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Fix compilation warnings in base code on some platforms.
Fixes: bd6651c2d2 ("i40e/base: use bit shift macros")
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Use ether API of 'is_valid_assigned_ether_addr' to validate
MAC address.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Zhe Tao <zhe.tao@intel.com>
Generate a MAC address for each VF during PF host
initialization.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Zhe Tao <zhe.tao@intel.com>
VLAN filtering was always performed, even if hw_vlan_filter was
disabled. During device initialization, default filter
RTE_MACVLAN_PERFECT_MATCH was applied. In this situation, all incoming
VLAN frames were dropped by the card (increase of the register RUPP - Rx
Unsupported Protocol).
In order to restore default behavior, if HW VLAN filtering is activated,
set a filter to match MAC and VLAN. If not, set a filter to only match
MAC.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Fixes: 912b595146 ("i40e: mac vlan filter")
Signed-off-by: Julien Meunier <julien.meunier@6wind.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
The no-refcount path was being taken without the application opting
in to it.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Reported-by: Mike Stolarchuk <mike.stolarchuk@bigswitch.com>
Signed-off-by: Rich Lane <rich.lane@bigswitch.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
The multi queue mode ETH_MQ_RX_VMDQ_DCB_RSS is not supported in
ixgbe driver.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Call the ixgbevf_remove_mac_addr() function in the ixgbevf_dev_close()
function to ensure that the VF traffic goes to the PF after stop,
close and detach of the VF.
Fixes: af75078fec ("first public release")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add the nb_rx_q and nb_tx_q values to the error message
to give details about the error.
Fixes: 27b609cbd1 ("ethdev: move the multi-queue mode check to specific drivers")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Releasing the rx and tx queues is already done in ixgbe_dev_close()
so it does not need to be done in eth_ixgbevf_dev_uninit().
Fixes: 2866c5f1b8 ("ixgbe: support port hotplug")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
For the secondary process of DPDK to initialize ixgbevf, it will always
use the simple RX function or LRO RX function, and this behavior is not
the same RX/TX function selection logic as it is for the primary process.
Use the ixgbe_set_tx_function and ixgbe_set_rx_function to select the
RX/TX function when secondary process calls the init function for eth dev.
Fixes: 9d8a92628f ("ixgbe: remove simple scalar scattered Rx method")
Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Normally the auto-negotiation is supported by FW. SW need not care about
that. But on x550em_x, FW doesn't support auto-neg. As the x550em_x ports
are 10G, if we connect the port will a peer which is 1G, the link will
always be down.
We need support auto-neg by SW to avoid this link down issue. As we already
have the code to handle the link speed setting, what we need is a trigger.
When the advertised link speed changes, a PHY interruption will be
triggered. So, we should handle this interrupt and call ixgbe_handle_lasi
to set the link speed correctly.
Please be aware it's working when auto-neg is on. If the auto-neg of the
peer port is turned off and its speed is indicated manually, we should also
set the speed of our own port manually.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
Add multicast promiscuous mode support on ixgbe VF driver.
Please note if we want to use this promiscuous mode, we need both PF
and VF driver to support it. The reason is this VF feature is
configged on PF.
If use kernel PF driver + dpdk VF driver, make sure kernel PF driver
support VF multicast promiscuous mode. If use dpdk PF + dpdk VF,
better make sure PF driver is the same version as VF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
It's more valuable to abstract the link read/write interface. As such,
change the following method names, and add them to a new link info
structure:
read_i2c_combined => read_link
read_i2c_combined_unlocked => read_link_unlocked
write_i2c_combined => write_link
write_i2c_combined_unlocked => write_link_unlocked
This will allow X550EM_a to override these methods for MDIO access
while X550EM_x provides methods to use I2C combined access.
Initially the structure is just method pointers and a bus
address.
Two functions involved in combined I2C accesses were moved from
ixgbe_phy.c to ixgbe_x550.c. The underlying functions that carry
out the combined I2C accesses were left in ixgbe_phy.c because
they share some functions with other I2C methods.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The MDIO clock speed must be reconfigured after the MAC reset.
The MDIO clock speed becomes invalid, therefore the driver reads
invalid PHY register values. The driver now set the MDIO clock
speed prior to initializing PHY ops and again after the MAC reset.
As now the MDIO speed gets set in more than one place, make a
function for it so it will always be done correctly.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Do not set FDIRCTRL.DROP_NO_MATCH in ixgbe_init_fdir_perfect_82599(),
this bit is already set in ixgbe_set_fdir_drop_queue_82599() which
makes more sense for drivers that call that function.
This resolves an issue where packets were being dropped when switching
to perfect filters mode.
Setting this bit makes no sense in perfect filters mode for the
driver as we do not want to route all packets that don't match an FDIR
rule to a single queue and instead fall back to RSS.
Drivers that need this bit set can call ixgbe_set_fdir_drop_queue_82599()
and the ones that don't, can preserve the old behavior.
Fixes: 2241ce2816 ("ixgbe/base: add flow director drop queue")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The X550EM_a device provides the MAC_SGMII_BUSY register to
indicate when slow SGMII register writes complete. Add
definitions for the register. No definitions are provided for
the individual bits under the theory that it is better to wait
for everything to complete when needed rather than try to map
out which reads need to wait for which writes. So we should wait
when anything is marked as "busy".
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Instead of not defining the callback for set_phy_power when
manageability is enabled, put the check in the set_phy_power
function so that only turning the power off is conditional on
management, but not turning the PHY on.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch resolves an issue where VF mac address is zeroed out
in cases where the VF driver is loaded while the PF interface
is down.
The solution is to only set it when we get an ACK from the PF.
Fixes: 6202266e56 ("ixgbe/base: vf changes")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Only x550em_x V1 was supported before. Now V2 is supported.
A mask for V1 and V2 is defined and used to support both.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add new X550EM_a devices and their mac types, X550EM_a
and X550EM_a_vf.
Update the code to use the new devices and mac types.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Currently, ixgbe vf and pf will disable interrupt twice in
stop stage and uninit stage. It will cause an error:
testpmd> quit
Shutting down port 0...
Stopping ports...
Done
Closing ports...
EAL: Error disabling MSI-X interrupts for fd 26
Done
because the interrupt has already been disabled in stop stage.
Since it is enabled in init stage, better remove from
stop stage.
Fixes: 0eb609239e ("ixgbe: enable Rx queue interrupts for PF and VF")
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
The freeing of mbuf's in ixgbe is one of the observable hot spots
under load. Optimize it by doing bulk free of mbufs using code similar
to i40e and fm10k.
Drop the no longer needed micro-optimization for the no refcount flag.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This brings the DPDK igb driver inline with the behavior used by
the current Linux driver. The IGB hardware has several different
MAC types and the threshold values that work vary based on the hardware.
Since DPDK 1.8 it has been up to devices to provide the correct default
configuration parameter. But the igb driver gives values that are broken
on some devices, and always causes a warning message at startup.
Please test this on real hardware, I don't have the luxury of a
hardware lab full of variations of this chip.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Allow reprogramming of the RAR with a zero mac address,
to ensure that the VF traffic goes to the PF after
stop, close and detach of the VF.
Fixes: be2d648a2d ("igb: add PF support")
Fixes: d82170d279 ("igb: add VF support")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Enable promiscuous and allmulticast mode control from the VF using
rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() and
rte_eth_allmulticast_enable()/rte_eth_allmulticast_disable().
For promiscuous mode host/PF igb driver should be built with
IGB_ENABLE_VF_PROMISC.
For allmulticast mode "allmulti" flag should be set for appropriate PF
ifconfig eth0 allmulti
Signed-off-by: Yury Kylulin <yury.kylulin@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Modified driver and eal code to support I217 and I218 Intel NICs.
Compiled and tested (via testpmd) on Ubuntu 14.04 for target
x86_64-native-linuxapp-gcc
Compiled for target x86_64-native-linuxapp-clang
Signed-off-by: Ravi Kerur <rkerur@gmail.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The last packet of the tx burst function array was not being
emitted until the subsequent call. The nic descriptor index
was being set to the current tx descriptor instead of one past
the descriptor as required by the nic.
Fixes: d739ba4c6a ("enic: improve Tx packet rate")
Signed-off-by: John Daley <johndale@cisco.com>
This is a wholesale replacement of the Enic PMD receive path in order
to improve performance and code clarity. The changes are:
- Simplify and reduce code path length of receive function.
- Put most of the fast-path receive functions in one file.
- Reduce the number of posted_index updates (pay attention to
rx_free_thresh)
- Remove the unneeded container structure around the RQ mbuf ring
- Prefetch next Mbuf and descriptors while processing the current one
- Use a lookup table for converting CQ flags to mbuf flags.
Signed-off-by: John Daley <johndale@cisco.com>
The enic PMD driver send function uses a constant offset instead
of relying on the data_off in the mbuf to find the start of the packet.
Fixes: fefed3d1e6 ("enic: new driver")
Signed-off-by: Yoann Desmouceaux <ydesmouc@cisco.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Chelsio NIC ports share a single PF. Move rte_eth_copy_pci_info()
to copy the pci device information to the remaining ports as well.
Also update license year to 2016.
Fixes: eeefe73f0a ("drivers: copy PCI device info to ethdev data")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
max_rx_pkt_len already includes ETHER_HDR_LEN and ETHER_CRC_LEN for the
mtu. But, the firmware also adds ETHER_HDR_LEN and ETHER_CRC_LEN to the
mtu specified. Fix by subtracting these values from the mtu before
passing it to firmware.
Fixes: 4b2eff452d ("cxgbe: enable jumbo frames")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
The size of each entry in the port's rss table is actually 2 bytes
and not 1 byte. A segfault occurs when accessing part of port 0's rss
table because it gets overwritten by subsequent port 1's part of the
rss table. Fix by setting the size of each entry appropriately.
Fixes: 92c8a63223 ("cxgbe: add device configuration and Rx support")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
The VF needs to determine the queues sizes before .dev_infos_get
so that it can hint to the upper layer the proper sizes. Move
bnx2x_vf_get_resources() to .eth_dev_init and probe with the guesses
from bnx2x_init_rte().
Signed-off-by: Chas Williams <3chas3@gmail.com>
Acked-by: Rasesh Mody <rasesh.mody@qlogic.com>
bnx2x_loop_obtain_resources() returns a struct containing the status and
the error message. If bnx2x_do_req4pf() fails, it shouldn't return both
of these fields set to 0 indicating failure and no error.
Further, bnx2x_do_req4pf() needs to be able fail and return NO_RESOURCES
so that bnx2x_loop_obtain_resources() can negotiate reduced resource
requirments. This requires additional checking around bnx2x_do_req4pf().
Fixes: 540a211084 ("bnx2x: driver core")
Signed-off-by: Chas Williams <3chas3@gmail.com>
Acked-by: Rasesh Mody <rasesh.mody@qlogic.com>
The mbuf_alloc_size is leftover from BSD or some other code base.
It is set but never used in DPDK driver. After that the related defines
can also be eliminated.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Harish Patil <harish.patil@qlogic.com>
