This patch adds checking of the symmetric crypto operation status
that was silently skipped before. It fixes the wireless algorithms
session creation (SNOW3G, KASUMI, ZUC) and passing of the digest
data for the verification by PMD. Also fixed the missing aad padding
issue revealed after op status checking was introduced.
Fixes: c0f87eb525 ("cryptodev: change burst API to be crypto op oriented")
Fixes: 77a217a19b ("test/crypto: add AES-CCM tests")
Cc: stable@dpdk.org
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Tested-by: Ankur Dwivedi <adwivedi@marvell.com>
Reviewed-by: Anoob Joseph <anoobj@marvell.com>
Use the new API to wait in low power state instead of continuous
polling to save CPU cycles and power.
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Use the new API to wait in low power state instead of continuous
polling to save CPU cycles and power.
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
While using ticket lock, cores repeatedly poll the lock variable.
This is replaced by rte_wait_until_equal API.
Running ticketlock_autotest on ThunderX2, Ampere eMAG80, and Arm N1SDP[1],
there were variances between runs, but no notable performance gain or
degradation were seen with and without this patch.
[1] https://community.arm.com/developer/tools-software/oss-platforms/w/\
docs/440/neoverse-n1-sdp
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Tested-by: Phil Yang <phil.yang@arm.com>
Tested-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
The rte_wait_until_equal_xx APIs abstract the functionality of
'polling for a memory location to become equal to a given value'.
Add the RTE_ARM_USE_WFE configuration entry for aarch64, disabled
by default. When it is enabled, the above APIs will call WFE instruction
to save CPU cycles and power.
From a VM, when calling this API on aarch64, it may trap in and out to
release vCPUs whereas cause high exit latency. Since kernel 4.18.20 an
adaptive trapping mechanism is introduced to balance the latency and
workload.
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
There are two definitions conflicting each other, for more
details, refer to [1].
include/rte_atomic_64.h:19: error: "dmb" redefined [-Werror]
drivers/bus/fslmc/mc/fsl_mc_sys.h:36: note: this is the location of the
previous definition
#define dmb() {__asm__ __volatile__("" : : : "memory"); }
The fix is to reuse the EAL definition to avoid conflicts.
[1] http://inbox.dpdk.org/users/VI1PR08MB537631AB25F41B8880DCCA988FDF0@
VI1PR08MB5376.eurprd08.prod.outlook.com/T/#u
Fixes: 3af733ba8d ("bus/fslmc: introduce MC object functions")
Cc: stable@dpdk.org
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Relax memory requirement for event timers when internal mempool used is
octeontx2 mempool.
Add debug log to print the memory used.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Virtual eventdevice should only be created when there is no existing
device with the same name.
Fixes: e0f4a0ed42 ("test: skip tests when missing requirements")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
If an application issues rte_event_enqueue_new_burst() or
rte_event_enqueue_forward_burst() call with a burst of events longer
than the configured max enqueue burst size, DSW allocates credits not
only for events actually enqueued, but for the complete burst. If this
process is repeated, enough credits will have leaked to cause the
event device to backpressure (i.e. disallow) any new enqueue
operations.
In addition, the port-level enqueue xstats will log the wrong number
of events enqueued for oversized enqueues.
This patch makes DSW gracefully handle oversized enqueue bursts.
Fixes: 1c8e3caa3b ("event/dsw: add event scheduling and device start/stop")
Cc: stable@dpdk.org
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Always enable implicit release since we don't support explicit release
in datapath.
Master lcore is used only for printing stats so don't allocate event
port for it.
Fix service launch for event device without distributed scheduling.
Fixes: bcb6f841d4 ("examples/l2fwd-event: setup service core")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Fix DSW's rte_event_enqueue_burst(), so that a call with a zero-sized
event array immediately flushes the port's output buffers. Prior to
this patch, the flush operation would be deferred to the next enqueue
or dequeue call, which is inconsistent with DSW documentation.
Fixes: 1c8e3caa3b ("event/dsw: add event scheduling and device start/stop")
Cc: stable@dpdk.org
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
When building the API docs, we can make the meson.build file easier to
read, and allow more code per line, by using subdir_done() to quit early.
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Add proper support for calling sphinx whenever a file in the doc
directory changes. This is accomplished by using a wrapper script
for sphinx, which runs sphinx but also emits a gcc-format dependency
file listing all the doc files. This is used by ninja so that any
change to the doc files triggers a rebuild of the docs.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
For building the guides, we can make the meson.build easier to read by
using the subdir_done function to quit early.
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The install parameter to configure_file is new in 0.50 and generates a
warning since it is newer than our minimum version of 0.47.1. The
parameter, however, is unneeded as the documentation states:
"When omitted it defaults to true when install_dir is set and not empty,
false otherwise."
Given that install_dir is not set for this file, install defaults to false
so no need to explicitly specify it.
Fixes: 720b14db3a ("build: generate API documentation with meson")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Since kni no longer includes the ethtool code and so is faster to build, we
no longer need the console parameter to have incremental screen updates as
it builds. Therefore, we drop the keyword which removes the warning.
Fixes: b78f32cff9 ("kni: support meson build")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Add Travis compilation jobs for native aarch64. gcc/clang compilations
for static/shared libraries are added.
Some limitations for current aarch64 Travis support:
1. Container is used. Huge page is not available due to security reason.
2. Missing kernel header package in Xenial distribution.
Solutions to address the limitations:
1. Not to add unit test for now. And run tests with no-huge in future.
2. Use Bionic distribution for all aarch64 jobs.
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Drivers librte_mempool_ring.so and librte_pmd_null.so are loaded by
librte_eal.so when running testpmd.
In Ubuntu Xenial, driver path is installed to RPATH on testpmd. This
allows librte_eal.so to find drivers by using the RPATH.
However, in Ubuntu Bionic, driver path is installed to RUNPATH instead.
The RUNPATH on testpmd is not available by librte_eal.so and therefore
lead to driver load failure:
EAL: Detected 32 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: librte_mempool_ring.so: cannot open shared object file:
No such file or directory
EAL: FATAL: Cannot init plugins
EAL: Cannot init plugins
Add 'drivers' into LD_LIBRARY_PATH so that testpmd can find and make
use of these shared libraries.
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Aaron Conole <aconole@redhat.com>
A new vDPA class was recently introduced.
IFC driver implements the vDPA operations,
hence it should be moved to the vDPA class.
Move it.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add vDPA devices features table and explanation.
Any vDPA driver can add its own supported features by ading a new ini
file to the features directory in doc/guides/vdpadevs/features.
Signed-off-by: Matan Azrad <matan@mellanox.com>
The vDPA (vhost data path acceleration) drivers provide support for
the vDPA operations introduced by the rte_vhost library.
Any driver which provides the vDPA operations should be moved\added to
the vdpa class under drivers/vdpa/.
Create the general files for vDPA class in drivers and in documentation.
The management tree for vDPA drivers is
git://dpdk.org/next/dpdk-next-virtio.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
meson 0.53.0 has a compatibility issue [1] with the python 3.5.2 that comes
in Ubuntu 16.04.
On the other hand, the minimal version supported in dpdk is 0.47.1.
Stick to this version to avoid getting hit by regressions in meson latest
shiny release.
1: https://github.com/mesonbuild/meson/issues/6427
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Using version 0.47.1, meson is unable to find the math library in Travis
for the 32bits job.
Quite surprisingly, this problem is not seen with the 64bits jobs.
Switching to 0.48.0, the problem disappears.
But we should pass 'm' to find_library instead of 'libm' anyway.
Fixes: 98edcbb5ab ("eal/windows: introduce Windows support")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
If the compiler does not recognise the specific CPU when building with the
default "native" machine type, sse4.2 instructions can be missing, causing
a build error. Rather than advising the user to change the machine type,
we can just turn on SSE4.2 directly. This can prevent issues with running
automated tests with older compilers/distros on newer hardware.
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The service_valid call is used without properly bounds checking the
input parameter. Almost all instances of the service_valid call are
inside a for() loop that prevents excessive walks, but some of the
public APIs don't bounds check and will pass invalid arguments.
Prevent this by using SERVICE_GET_OR_ERR_RET where it makes sense,
and adding a bounds check to one service_valid() use.
Fixes: 8d39d3e237 ("service: fix race in service on app lcore function")
Fixes: e9139a32f6 ("service: add function to run on app lcore")
Fixes: e30dd31847 ("service: add mechanism for quiescing")
Cc: stable@dpdk.org
Signed-off-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
We recently started to get random failures on the common_autotest ut with
clang on Ubuntu 16.04.6.
Example: https://travis-ci.com/DPDK/dpdk/jobs/263177424
Wrong rte_log2_u64(0) val 0, expected ffffffff
Test Failed
The ut passes 0 to log2() to get an expected value.
Quoting log2 / log(3) manual:
If x is zero, then a pole error occurs, and the functions return
-HUGE_VAL, -HUGE_VALF, or -HUGE_VALL, respectively.
rte_log2_uXX helpers handle 0 as a special value and return 0.
Let's have dedicated tests for this case.
Fixes: 05c4345ef5 ("test: add unit test for integer log2 function")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
The soname for each stable ABI version should be just the ABI version major
number without the minor number. Unfortunately both major and minor were
used causing version 20.1 to be incompatible with 20.0.
This patch fixes the issue by switching from 2-part to 3-part ABI version
numbers so that we can keep 20.0 as soname and using the final digits to
identify the 20.x releases which are ABI compatible. This requires changes
to both make and meson builds to handle the three-digit version and shrink
it to 2-digit for soname.
The final fix needed in this patch is to adjust the library version number
for the ethtool example library, which needs to be upped to 2-digits, as
external libraries using the DPDK build system also use the logic in this
file.
Fixes: cba806e07d ("build: change ABI versioning to global")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Tested-by: Ray Kinsella <mdr@ashroe.eu>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Kevin Laatz <kevin.laatz@intel.com>
Tested-by: David Marchand <david.marchand@redhat.com>
When testing build with +debug options, the statistics are enabled.
It was wrongly matching CONFIG_RTE_IBVERBS_LINK_STATIC.
The pattern is fixed to match only statistics config options.
Fixes: 2c0dd7b69f ("config: add static linkage of mlx dependency")
Cc: stable@dpdk.org
Reported-by: Ali Alnubani <alialnu@mellanox.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
This rewrites the MKSTR macro appending an empty string to its arguments
to resolve build failures similar to:
drivers/net/mlx4/mlx4.c:461:14: fatal error: format string is not a
string literal [-Wformat-nonliteral]
MKSTR(path, "%s/device/uevent", device->ibdev_path);
drivers/net/mlx4/mlx4_utils.h:82:30: note: expanded from macro 'MKSTR'
char name[snprintf(NULL, 0, __VA_ARGS__) + 1]; \
drivers/net/mlx5/mlx5_stats.c:144:15: fatal error: format string is not a
string literal [-Wformat-nonliteral]
MKSTR(path, "%s/ports/%d/hw_counters/%s",
drivers/net/mlx5/mlx5_utils.h:149:30: note: expanded from macro 'MKSTR'
char name[snprintf(NULL, 0, __VA_ARGS__) + 1]; \
The errors reproduce with clang version 9.0.0, and the release notes
don't mention what could have caused them.
Fixes: 7fae69eeff ("mlx4: new poll mode driver")
Fixes: 771fa900b7 ("mlx5: introduce new driver for Mellanox ConnectX-4 adapters")
Cc: stable@dpdk.org
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
Signed-off-by: Matan Azrad <matan@mellanox.com>
After upgrading to python-3.8.0, a syntax mismatch is revealed:
doc/guides/conf.py:240: SyntaxWarning: "is not" with a literal.
Did you mean "!="?
if value is not '':
Removing "is not ''" seems the right thing to do.
A patch may also be needed in the RTD theme package:
https://github.com/readthedocs/sphinx_rtd_theme/commit/a49a812c.diff
(not included in release 0.4.3)
Fixes: 9db3f52126 ("doc: generate NIC overview table from ini files")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Previous fix gives hiccups to gcc on RHEL 7.6:
== Build lib/librte_eal/linux/eal
CC eal_interrupts.o
...lib/librte_eal/linux/eal/eal_interrupts.c: In function
‘eal_intr_thread_main’:
...lib/librte_eal/linux/eal/eal_interrupts.c:1048:9: error: missing
initializer for field ‘events’ of ‘struct epoll_event’
[-Werror=missing-field-initializers]
struct epoll_event ev = { };
^
In file included from ...lib/librte_eal/linux/eal/eal_interrupts.c:15:0:
/usr/include/sys/epoll.h:89:12: note: ‘events’ declared here
uint32_t events; /* Epoll events */
^
...lib/librte_eal/linux/eal/eal_interrupts.c: At top level:
cc1: error: unrecognized command line option
"-Wno-address-of-packed-member" [-Werror]
cc1: all warnings being treated as errors
Fixes: e0ab8020ac ("eal/linux: fix uninitialized data valgrind warning")
Cc: stable@dpdk.org
Reported-by: Andrew Rybchenko <arybchenko@solarflare.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Valgrind reports that eal interrupt thread is calling epoll_ctl
with uninitialized data.
This is a false positive, because the kernel is not going to care about
the unused bits in the union but trivial to fix by initializing it.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: David Marchand <david.marchand@redhat.com>
Meson fails to find a pkg-config executable if pkgconfig
isn't set for aarch64. The environment variable `PKG_CONFIG_PATH`
is useless in this case, and meson fails to locate dependencies
that are built in non-standard paths.
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Update the cross build tool version to gcc8.3.
Fixes: 01add9da25 ("doc: add cross compiling guide")
Cc: stable@dpdk.org
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Previous versions of numactl may produce the following error
on some systems (at least on Fedora 30 and RHEL7.4):
./.libs/libnuma.so: undefined reference to `minor'
./.libs/libnuma.so: undefined reference to `major'
collect2: error: ld returned 1 exit status
This was fixed in upstream commit:
25691a084a
The fix is available in v2.0.13.
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Gavin Hu <gavin.hu@arm.com>
The output of running the helloworld example on FreeBSD was a little
out-of-date and can be shortened by using the latest version of DPDK.
Update appropriately.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
FreeBSD 10 is now EOL and all testing with DPDK takes place on BSD versions
11 and 12, so we can just remove the note. The BSD ports are supported on
all non-EOL versions of BSD.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Since the meson instructions are the simpler of the two sets, and also the
ones most future-proof, put those first in the user documentation with make
instructions following them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Gavin Hu <gavin.hu@arm.com>
Add instructions on building DPDK and using the pkg-config file to the
linux GSG.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Update the system requirements section of the doc to cover builds with
meson and ninja. This involves updating the package dependencies to include
meson, ninja and python 3.5, and also updating the optional dependencies
section to explain that the components are enabled/disabled automatically
by meson.
As part of this update, the relevant sections were simplified to keep the
document shorter. For mandatory requirements, we can refer to the various
distro's development tools package groups rather than requiring gcc, core
tools etc. individually. The optional package list was very incomplete, and
if complete would duplicate information in the individual driver's guides.
Therefore we can simplify it by listing only the library optional
requirements and referring users to the driver docs to find details on
their dependencies.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Fix OFED and rdma-core versions for current offloads.
Add new offloads minimum versions.
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
