In several instances, "items" refers either to a flow pattern or a single
item, and "actions" either to the entire list of actions or only one of
them.
The fact the target of a rule (struct mlx4_flow_action) is also named
"action" and item-processing objects (struct mlx4_flow_items) as "cur_item"
("token" in one instance) contributes to the confusion.
Use this opportunity to clarify related comments and remove the unused
valid_actions[] global, whose sole purpose is to be referred by
item-processing objects as "actions".
This commit does not cause any functional change.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This PMD supports up to 4096 flow rule priority levels (0 to 4095).
Applications were not allowed to use them until now due to overlaps with
the default flows (e.g. MAC address, promiscuous mode).
This is not an issue in isolated mode when such flows do not exist.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Add missing comments and fix those not Doxygen-friendly.
Since the private structure definition is modified, use this opportunity to
add one remaining missing include required by one of its fields
(sys/queue.h for LIST_HEAD()).
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
There is no benefit in having this as a separate function.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
rte_flow_error_set() is a convenient helper to initialize error objects.
Since there is no fundamental reason to prevent applications from using it,
expose it through the public interface after modifying its return value
from positive to negative. This is done for consistency with the rest of
the public interface.
Documentation is updated accordingly.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Correct two minor issues in the GSO programmer's guide:
- a note is rendered incorrectly in the middle of an unordered list;
this results in the remainder of the list appearing inside the note.
Correct indentation of the note to resolve same.
- two minor visual artifacts are present in the 'three-part-output-segment'
diagram. Remove same.
Fixes: f6010c7655 ("doc: add GSO programmer's guide")
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Increase port id range to 16 bits and remove the unnecessary cast.
Fixes: f8244c6399 ("ethdev: increase port id range")
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
port_id in struct lio_device should be increased range to uint16_t since
port id in rte_eth_dev_data has already been defined as uint16_t.
Fixes: f8244c6399 ("ethdev: increase port id range")
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Some features applied were still developed based on older version uint8_t
port_id, but port_id has been increased range to uint16_t. The patch fixes
the issue.
Fixes: f8244c6399 ("ethdev: increase port id range")
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
vPMD tx does not set sw_ring's mbuf to NULL after free.
Therefore, in cases where the vector transmit function is in
use, we must use the appropriate index and threshold values
for the queue to only free the unreleased mbufs
Fixes: b4669bb950 ("i40e: add vector Tx")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Removed legacy writes to ORT/PIT registers from
i40e_GLQF_reg_init(struct i40e_hw *hw) function.
Latest NVM versions contain all relevant values
and these values should not be overwritten by SW to
maintain driver/firmware compatibility and to avoid
conflicts with dynamic device personalization profiles.
Fixes: f05ec7d77e ("i40e: initialize flow director flexible payload setting")
Cc: stable@dpdk.org
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch adds a test for verifying the bitmap operations.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The librte_sched uses rte_bitmap to manage large arrays of bits in an
optimized method so, moving it to eal/common would allow other libraries
and applications to use it.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
A race condition can happen during parallel builds, where a header
might be installed in RTE_OUT/include before CFLAGS is recursively
expanded. This causes GCC to sometimes pick the header path as
SRCDIR/... and sometimes as RTE_OUT/include/... making the build
unreproducible, as the full path is used for the expansion of
__FILE__ and in the DWARF directory listing.
Installing all symlinks before all builds solves the problem. It is
still suboptimal, as the (fixed) path recorded in the DWARF dir
listing will include the user-configurable build output directory,
and thus will result in a different binary between different users
despite all other conditions being equal, but it is a simpler
approach that will anyway be obsolete once the build system is
switched to Meson.
Suggested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
In order to achieve reproducible builds, always use the same
order when listing object files to build dependencies lists.
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
In order to achieve reproducible builds, always use the same
order when listing files for compilation.
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
In order to achieve fully reproducible builds, always use the same
inclusion order for headers in the Makefiles.
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
The result of find might not be stable depending on external
conditions.
Pipe it through LC_ALL=C sort to ensure reproducible results when
generating examples.dox.
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
The output of wildcard might not be stable and depend on the
filesystem and other factors.
This means the content libdpdk.so linker script might change between
builds from the same sources.
Run the list through sort to ensure reproducibility.
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
If we want to enable IOVA mode, introduced by
commit 93878cf025 ("eal: introduce helper API for IOVA mode"),
we need PMDs (for PCI devices) to expose this flag.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
With the introduction of IOVA mode, the only blocker to run
with 4KB pages for NICs binding to vfio-pci, is that
RTE_BAD_PHYS_ADDR is not a valid IOVA address.
We can refine this by using VA as IOVA if it's IOVA mode.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
snprintf return value is the length of was encoded into destination
array excluding '\0'. Thus return value equal to the length of the
destination array or more means truncation.
This commit fixes improper use of the return value.
Fixes: eec136f3c5 ("aesni_gcm: add driver for AES-GCM crypto operations")
Fixes: 924e84f873 ("aesni_mb: add driver for multi buffer based crypto")
Fixes: 0f548b50a1 ("crypto/aesni_mb: process crypto op on dequeue")
Fixes: 169ca3db55 ("crypto/armv8: add PMD optimized for ARMv8 processors")
Fixes: 2773c86d06 ("crypto/kasumi: add driver for KASUMI library")
Fixes: 94b0ad8e0a ("null_crypto: add driver for null crypto operations")
Fixes: d61f70b4c9 ("crypto/libcrypto: add driver for OpenSSL library")
Fixes: 3aafc423cf ("snow3g: add driver for SNOW 3G library")
Fixes: cf7685d68f ("crypto/zuc: add driver for ZUC library")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Added AES-CCM tests for Intel QAT PMD and OpenSSL PMD.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Before adding AES-CCM tests, some test code used
for AES-GCM can be renamed, so it can be reused
for AES-CCM, as both need similar parameters.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Add support to AES-CCM, for 128, 192 and 256-bit keys.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
When creating a session for AES-GCM, since the key is going
to be constant, the OpenSSL context can initialize the key
at that moment, leaving the setting of the IV for the
operation handling.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
When using AES-GCM with OpenSSL, cipher direction
and authentication operation were being set incorrectly,
as the PMD was looking at the cipher and authentication
transform, instead of the new AEAD.
Fixes: b79e4c00af ("cryptodev: use AES-GCM/CCM as AEAD algorithms")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
According to the API, AES-CCM has special requirements
when setting IV and AAD fields.
The L2fwd-crypto app is updated to set the nonce (IV)
and AAD in the right positions in these two fields
(1 byte after start of IV field and 18 bytes after start
of AAD).
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
According to the API, AES-CCM has special requirements
when setting IV and AAD fields.
The L2fwd-crypto app is updated to set the nonce (IV)
and AAD in the right positions in these two fields
(1 byte after start of IV field and 18 bytes after start
of AAD).
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
AES-CCM algorithm has some restrictions when
handling nonce (IV) and AAD information.
As the API stated, the nonce needs to be place 1 byte
after the start of the IV field. This field needs
to be 16 bytes long, regardless the length of the nonce,
but it is important to clarify that the first byte
and the padding added after the nonce may be modified
by the PMDs using this algorithm.
Same happens with the AAD. It needs to be placed 18 bytes
after the start of the AAD field. The field also needs
to be multiple of 16 bytes long and all memory reserved
(the first bytes and the padding (may be modified by the PMDs).
Lastly, nonce is not needed to be placed in the first 16 bytes
of the AAD, as the API stated, as that depends on the PMD
used, so the comment has been removed.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
In order to improve memory utilization, a single mempool
is created, containing the crypto operation and mbufs
(one if operation is in-place, two if out-of-place).
This way, a single object is allocated and freed
per operation, reducing the amount of memory in cache,
which improves scalability.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add support for multiple queue pairs, when there are
more logical cores available than crypto devices enabled.
For instance, if there are 4 cores available and
2 crypto devices, each device will have two queue pairs.
This is useful to have multiple logical cores using
a single crypto device, without needing to initialize
a crypto device per core.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
For throughput and latency tests, it is not required
to populate the mbufs with any test vector.
For verify test, there is already a function that rewrites
the mbufs every time they are going to be used with
crypto operations.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
When running the verify test, mbufs in the pool were
populated with the test vector loaded from a file.
To avoid limiting the number of operations to the pool size,
mbufs will be rewritten with the test vector, before
linking them to the crypto operations.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Instead of parsing number of segments, from the command line,
parse segment size, as it is a more usual case to have
the segment size fixed and then different packet sizes
will require different number of segments.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Since DPDK 17.08, there is specific parameters
for AEAD algorithm, like AES-GCM. When verifying
crypto operations with test vectors, the parser
was not reading AEAD data (such as IV or key).
Fixes: 8a5b494a7f ("app/test-crypto-perf: add AEAD parameters")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Instead of prepending the AAD (Additional Authenticated Data)
in the mbuf, it is easier to set after the crypto operation,
as it is a read-only value, like the IV, and then it is not
restricted to the size of the mbuf headroom.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
