Header files should be self contained and should not be cyclically
dependent.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Currently, hns3 reports VXLAN tunnel packet type for GENEVE,
which is misleading to user. In fact, hns3 hardware cannot
distinguish between VXLAN and GENEVE packet. So this patch
uses RTE_PTYPE_TUNNEL_GRENAT packet type to report.
Fixes: 7d6df32cf742 ("net/hns3: fix missing outer L4 UDP flag for VXLAN")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
meson build -Db_coverage=true
ninja -C build
../drivers/net/hns3/hns3_ethdev.c:2856:22: warning: ‘cfg.umv_space’ may be
used uninitialized in this function [-Wmaybe-uninitialized]
2856 | pf->wanted_umv_size = cfg.umv_space;
Fix compiling warnings using gcc 10.3.1.
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
This 'hns3_restore_filter' is an internal interface of driver.
Currently, it uses 'struct rte_eth_dev *dev' as input parameter,
This is inconvenient for the function to call in driver because
caller has to obtain its device address by global variable
'rte_eth_devices[]'. Fix the input of this function.
Fixes: 920be799dbc3 ("net/hns3: fix RSS indirection table configuration")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
The 'hns3_restore_filter' is used to restore flow rules from
rte_flow API during the reset process. This patch moves the
recovery of flow direction rule to this function to improve
code maintainability.
Fixes: fcba820d9b9e ("net/hns3: support flow director")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
After reset process, types of RSS flow rule cannot be restored when
load driver without RTE_ETH_MQ_RX_RSS_FLAG flag. This is because the
restoration for RSS flow rule is done in the 'hns3_config_rss()'. But
this function is also used to configure and restore RSS configuration
from ethdev ops, and doesn't configure RSS types if 'rxmode.mq_mode'
has not the flag. As a result, RSS types configured by rte flow API
can't be restored in this case when encounter reset. Actually, all
RSS rules are saved to a global link list.
Use the linked list to restore RSS flow rule.
Fixes: 920be799dbc3 ("net/hns3: fix RSS indirection table configuration")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
RSS flow rules are saved in RSS filter linked list. The linked
list is modified by rte_flow API and is used to restore RSS rules
during reset process. So this patch uses 'hw->flows_lock' to protect
the configuration and recovery of RSS rule.
Fixes: c37ca66f2b27 ("net/hns3: support RSS")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Currently, driver sets RSS function to 'RTE_ETH_HASH_FUNCTION_MAX'
when user flush all rules in order to judge whether driver needs
to restore RSS rules. In fact, all rules are saved in flow RSS list.
So there is no need to modify RSS function to this macro. And this
list can be used to restore. The modification of RSS function may
introduce new problem.
Fixes: eb158fc756a5 ("net/hns3: fix config when creating RSS rule after flush")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
The 'hns3_restore_rss_filter' function is used to restore RSS rule.
But this function calls the 'hns3_config_rss_filter' which sets the
last to invalid in flow RSS list. This causes the flow RSS list has
no valid rule.
Fixes: ec674cb742e5 ("net/hns3: fix flushing RSS rule")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
The Tx performance deteriorates in the case of larger packets size and
larger burst. It may take a long time to optimize in these scenarios,
so this commit reverts
commit 0b77e8f3d364 ("net/hns3: optimize Tx performance")
Fixes: 0b77e8f3d364 ("net/hns3: optimize Tx performance")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
In the situation that the driver hns3 exits abnormally during packets
sending and receiving, the hardware statistics are not cleared when the
driver hns3 is reloaded. It need to be cleared during driver hns3
initialization that hardware MAC statistics.
Fixes: 8839c5e202f3 ("net/hns3: support device stats")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
The '__rte_unused' tag in the input parameter of 'hns3_mac_stats_reset'
is redundant. This patch remove this tag. In addition, this function is
aimed to clear MAC statics. So using 'struct hns3_hw' as input parameter
is better than 'struct rte_eth_dev', and it also facilitates the call of
this function.
Fixes: 8839c5e202f3 ("net/hns3: support device stats")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Currently, to prevent missing reporting of reset interrupts and quickly
identify reset interrupts, the following logic is designed in the
FW (firmware) command interface hns3_cmd_send: if an unprocessed
interrupt exist (by checking reset registers), related reset task is
scheduled.
The secondary process may invoke the hns3_cmd_send interface (e.g. using
proc-info query some stats). Unfortunately, the secondary process
does not support reset processing, and a segment fault may occur if it
schedules reset task.
Fix it by limit the checking and scheduling of reset under only primary
process.
Fixes: 2790c6464725 ("net/hns3: support device reset")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Optimize SVE xmit algorithm performance, will get about 1%+
performance gain under 64B macfwd.
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
If txq's next-to-use plus nb_pkts equal txq's nb_tx_desc when using
simple xmit algorithm, the txq's next-to-use will equal nb_tx_desc
fter the xmit, this does not cause Tx exceptions, but may affect other
ops that depend on this field, such as tx_descriptor_status.
Fixes: 7ef933908f04 ("net/hns3: add simple Tx path")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
If txq's next-to-use plus nb_pkts equal txq's nb_tx_desc when using
SVE xmit algorithm, the txq's next-to-use will equal nb_tx_desc after
the xmit, this does not cause Tx exceptions, but may affect other ops
that depend on this field, such as tx_descriptor_status.
Fixes: f0c243a6cb6f ("net/hns3: support SVE Tx")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Currently, the number of Tx send bytes is obtained by accumulating the
length of the batch 'mbuf' packets of the current loop cycle.
Unfortunately, it uses svcntd (which means all lane, regardless of
whether the corresponding lane is valid) which may lead to overflow,
and thus refers to an invalid mbuf.
Because the SVE xmit algorithm applies only to a single mbuf, the
mbuf's data_len is equal pkt_len, so this patch fixes it by using
svaddv_u64(svbool_t pg, svuint64_t data_len) which only adds valid
lanes.
Fixes: fdcd6a3e0246 ("net/hns3: add bytes stats")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
The Rx and Tx vector algorithm of hns3 PMD don't support PTP
function. Currently, hns3 driver uses 'pf->ptp_enable' to check
whether PTP is enabled so as to not select Rx and Tx vector
algorithm. And the variable is set when call rte_eth_timesync_enable().
Namely, it may not be set before selecting Rx/Tx function, let's say
the case: set PTP offload in dev_configure(), do dev_start() and then
call rte_eth_timesync_enable(). In this case, all PTP packets can not
be received to application. So this patch fixes the check based on the
RTE_ETH_RX_OFFLOAD_TIMESTAMP flag.
Fixes: 3ca3dcd65101 ("net/hns3: fix vector Rx/Tx when PTP enabled")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Show whether support modifying VF VLAN filter or not.
Sample output changes:
+ -- support VF VLAN FILTER MOD: Yes
Signed-off-by: Jie Hai <haijie1@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Rename the function name with prefix hns3_ to keep the same code
style with other files and adjust some code to make it more readable.
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Fix code check warnings according to:
- function should have same name with previous declaration;
- local variable should no be referenced in macro referenced;
- macro argument 'adapter' should be enclosed in parentheses.
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Rename hns3 dump files and abstract a head file for dump.
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Increase the number of default Rx/Tx queue pairs to 8,
and add MQ feature flag to vDPA protocol features.
Signed-off-by: Abhimanyu Saini <absaini@amd.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Change cidx and pidx definition to mean used queue and avail
queue index respectively.
Signed-off-by: Abhimanyu Saini <absaini@amd.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Pickup new FW interface definitions for avail and used indexes.
Signed-off-by: Abhimanyu Saini <absaini@amd.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
The used/avail queue indexes are not bound by queue size,
because HW calculates descriptor entry index by performing
a simple modulo between queue index and queue_size.
So, do not check initial used and avail queue indexes
against queue size because it is possible for these
indexes to be greater than queue size in the
following cases:
1) The queue is created to be migrated into, or
2) The client issues a qstop/qstart after running datapath
Fixes: 4dda72dbdeab3 ("common/sfc_efx/base: add base virtio support for vDPA")
Cc: stable@dpdk.org
Signed-off-by: Abhimanyu Saini <absaini@amd.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Currently ring pmd does not support ``rte_power_monitor`` api.
This patch adds support by adding monitor callback that is called
whenever we enter sleep state and need to check if it is time to wake
up.
Signed-off-by: Herakliusz Lipiec <herakliusz.lipiec@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The relation between the isolated mode in ethdev flow API
and bifurcated driver behaviour was not clearly explained.
It is made clear in the how-to guide that isolated mode is required
for flow bifurcation to the kernel.
On the other side, the impact of the isolated mode on a bifurcated
driver is made more explicit.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Dariusz Sosnowski <dsosnowski@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
There's a bug in memif_stats_get() function due to confusion
between C2S (client->server) and S2C (server->client) rings,
causing a crash if there's a different number of Rx and Tx queues.
Fixit by selectiing the correct rings for Rx and Tx i.e for Rx, S2C
rings are selected and for Tx, C2S rings are selected.
Bugzilla ID: 734
Fixes: 09c7e63a71f9 ("net/memif: introduce memory interface PMD")
Cc: stable@dpdk.org
Signed-off-by: Huzaifa Rahman <huzaifa.rahman@emumba.com>
Reviewed-by: Joyce Kong <joyce.kong@arm.com>
The TAP device only lasts as long as the DPDK application that opened
it is running. This behavior is bad if the DPDK application needs
to be updated transparently without disturbing other services
using the tap device.
Add a persist feature to the TAP device. If this flag is set, the
kernel network device remains even if after the application has exited.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
On Linux and most other systems, network interface index is a 32-bit
integer. Indexes overflowing the 16-bit integer are frequently seen
when used inside a Docker container.
Fixes: 7c25284e30c2 ("net/tap: add netlink back-end for flow API")
Fixes: 2bc06869cd94 ("net/tap: add remote netdevice traffic capture")
Cc: stable@dpdk.org
Signed-off-by: Alex Kiselev <alex@bisonrouter.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
This commit extends the timeout for service_may_be_active()
from 100ms to 1000ms. Local testing on a idle and loaded system
(compiling DPDK with all cores) always completes after 1 ms.
The wait time for a service-lcore to finish is also extended
from 100ms to 1000ms.
The same timeout waiting code was duplicated in two tests, and
is now refactored to a standalone function avoiding duplication.
Reported-by: David Marchand <david.marchand@redhat.com>
Suggested-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Reviewed-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
The dev->device.numa_node field is set by each bus driver for
every device it manages to indicate on which NUMA node this device lies.
When this information is unknown, the assigned value is not consistent
across the bus drivers.
Set the default value to SOCKET_ID_ANY (-1) by all bus drivers
when the NUMA information is unavailable. This change impacts
rte_eth_dev_socket_id() in the same manner.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Test basic functionality and demonstrate use of following thread
attributes api. Additionally, test attributes are processed when
supplied to rte_thread_create().
* rte_thread_attr_init
* rte_thread_attr_set_affinity
* rte_thread_attr_get_affinity
* rte_thread_attr_set_priority
Signed-off-by: Narcisa Vasile <navasile@linux.microsoft.com>
Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Test basic functionality and demonstrate use of following thread
lifetime api.
* rte_thread_create
* rte_thread_detach
* rte_thread_equal
* rte_thread_join
Existing tests are updated to adapt to the thread_main function
prototype change.
The dependency on the pthread API can then be removed.
Signed-off-by: Narcisa Vasile <navasile@linux.microsoft.com>
Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Add rte_thread_equal() that tests if two rte_thread_id are equal.
Signed-off-by: Narcisa Vasile <navasile@linux.microsoft.com>
Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
The *rte_thread_create()* function can optionally receive an
rte_thread_attr_t object that will cause the thread to be created with
the affinity and priority described by the attributes object. If
no rte_thread_attr_t is passed (parameter is NULL), the default
affinity and priority are used.
On Windows, the function executed by a thread when the thread starts is
represented by a function pointer of type DWORD (*func) (void*).
On other platforms, the function pointer is a void* (*func) (void*).
Performing a cast between these two types of function pointers to
uniformize the API on all platforms may result in undefined behavior.
To fix this issue, a wrapper that respects the signature required by
CreateThread() has been created on Windows.
Signed-off-by: Narcisa Vasile <navasile@linux.microsoft.com>
Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Implement thread attributes for:
* thread affinity
* thread priority
Implement functions for managing thread attributes.
Priority is represented through an enum that allows for two levels:
* RTE_THREAD_PRIORITY_NORMAL
* RTE_THREAD_PRIORITY_REALTIME_CRITICAL
Affinity is described by the rte_cpuset_t type.
An rte_thread_attr_t object can be set to the default values
by calling rte_thread_attr_init().
Signed-off-by: Narcisa Vasile <navasile@linux.microsoft.com>
Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
The rate parameter modified to uint32_t, so that it can work
for more than 64 Gbps.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
As announced in the deprecation note, remove the Rx offload flag
'RTE_ETH_RX_OFFLOAD_HEADER_SPLIT' and 'split_hdr_size' field from
the structure 'rte_eth_rxmode'. Meanwhile, the place where the examples
and apps initialize the 'split_hdr_size' field, and where the drivers
check if the 'split_hdr_size' value is 0 are also removed.
User can still use `RTE_ETH_RX_OFFLOAD_BUFFER_SPLIT` for per-queue packet
split offload, which is configured by 'rte_eth_rxseg_split'.
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
In some cases application may receive a packet that should have been
received by the kernel. In this case application uses KNI or other means
to transfer the packet to the kernel.
With bifurcated driver we can have a rule to route packets matching
a pattern (example: IPv4 packets) to the DPDK application and the rest
of the traffic will be received by the kernel.
But if we want to receive most of the traffic in DPDK except specific
pattern (example: ICMP packets) that should be processed by the kernel,
then it's easier to re-route these packets with a single rule.
This commit introduces new rte_flow action which allows application to
re-route packets directly to the kernel without software involvement.
Add new testpmd rte_flow action 'send_to_kernel'. The application
may use this action to route the packet to the kernel while still
in the HW.
Example with testpmd command:
flow create 0 ingress priority 0 group 1 pattern eth type spec 0x0800
type mask 0xffff / end actions send_to_kernel / end
Signed-off-by: Michael Savisko <michaelsav@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
As part of DPDK 21.11 release, it was announced that the
use of attributes 'ingress' and 'egress' in 'transfer'
rules was deprecated. The transition period is over.
Starting from DPDK 22.11, the use of direction attributes
with attribute 'transfer' is not allowed. To enforce that,
a generic check is added to flow rule validate API.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
These actions are supported by no drivers.
The patch breaks ABI.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Ori Kam <orika@nvidia.com>
The action is supported by no drivers.
The patch breaks ABI.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Ori Kam <orika@nvidia.com>
The action is supported by no drivers.
The patch breaks ABI.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Ori Kam <orika@nvidia.com>
The action is supported by no drivers.
The patch breaks ABI.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Ori Kam <orika@nvidia.com>
Flags for IEEE1588 with ``PKT_*`` prefix has been changed to
``RTE_MBUF_F_*``. So in this patch updating the
old flags.
Fixes: b9b509246da2 ("mbuf: remove deprecated offload flags")
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
Tested-by: Yu Jiang <yux.jiang@intel.com>
