To improve code quality we want to turn on as many warnings as we can in
the DPDK code, so turn on the "unused-parameter" warning in meson builds to
match that of the make builds. To ensure correct compilation, disable the
warning selectively for driver base code that otherwise would have issues.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
New PCI device ids are created to support X710/XXV710 of Intel FPGA
Programmable Acceleration card N3000, also called ipn3ke.
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Port reset will call i40evf_uninit_vf() to release resource. It wants
to call i40evf_dev_close() to release resources. Before this patch,
hw->adapter_stopped was used to mark the status about start/stop and
close. So it will never call i40evf_dev_close() after stopping the port.
This patch added hw->adapter_closed flag in i40evf_dev_close() and
i40e_dev_close() to control the status of close.
Fixes: 4861cde46116 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
DCR is Intel internal information, no need to be in public code.
Fixes: de2cd512b176 ("net/i40e/base: new AQ commands for cloud filter")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Some global variables can indeed be static, add static keyword to them.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
NICs uses different delays up to a second during their
configuration. It makes no sense to busy-wait so long wasting
CPU cycles and preventing any other threads to execute on the
same CPU core. These busy polling are the rudiments that came
from the kernel drivers where you can not sleep in interrupt
context, but as we're in userspace, we're able and should
sleep to allow other threads to run.
Delays never called on rx/tx path, so this should not affect
performance.
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
There is a new set of TR bits that can be used when replacing
the cloud filters so add them in. Also added a check to make
sure that the replace cloud filters AQ command doesn't get
executed on an X722 since it is not supported there.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add HW capability flag to indicate that firmware supports stopping
LLDP agent. This feature has been added in FW API 1.7 for XL710
devices and 1.6 for X722. Also raise expected minor version number
for X722 FW API to 6.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
These two functions are currently only used in the LED get/set
functions, which are not apart of the VF driver. So the
i40e_aq_set/get_phy_register functions should be wrapped so they
can be removed from the VF driver.
This was brought up in the Linux community that these functions in
the VF driver had no callers in the tree, so they should be removed.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Carlsville Device use 10GBASE-T/1GBASE-T PHY with additional support
for 5GBASE-T/2.5GBASE-T.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch adds the default value for Flow Control Refresh Threshold
to set_mac_config AdminQ command. Previously, calling this AdminQ
command would overwrite the default value with 0.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
During switching between old NVM structure approach (called
structured NVM) to new one (called flat NVM) or backward flash
needs to be rearranged to required NVM structure.
This is a part of transition from one NVM structure to another.
The function is introduced to command firmware to start
rearrangement process.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Firmware can return a busy state, so the i40e_asq_send_command will
return I40E_ERR_NOT_READY.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add new field - command flags with only one flag for now. Added flag
tells FW that it shouldn't change page while accessing QSFP module,
as it was set manually.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The wait time for Global Reset Ready steady state is calculated based on
the GLGEN_RSTCTL.GRSTDEL value. However, current impelementation multiplied
that value by 20 as a workaround for an issue in SOC platforms.
This resulted in the maximum GLGEN_RSTCTL.GRSTDEL timeout of 6.5 seconds
becoming 130 seconds, which is so long that the VMkernel watchdog thinks
the kernel is frozen and triggers a PSOD.
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Allocated resources were not freed in the event of failure in
i40e_init_asq function. This patch gracefully handles all failures.
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Allocated resources were not freed in the event of a failure in
i40e_init_lan_hmc function. This patch gracefully handles the fail
case after initializing the lan hmc.
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The NVM is in little endian so when we read from it we need to do
the correct thing for the endianness of the machine.
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch fixes the polling mechanism of GLGEN_RSTAT.DEVSTATE
in the PF Reset path when Global Reset is in progress.
While the driver is polling for the end of the PF Reset and
the Global Reset is triggered, abandon the PF Reset path and
prepare for the upcoming Global Reset.
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch enables tc-flower based hardware offloads. tc flower
filter provided by the kernel is configured as driver specific
cloud filter. The patch implements functions and admin queue
commands needed to support cloud filters in the driver and
adds cloud filters to configure these tc-flower filters.
Also it cover below API renaming for code clean.
- i40e_aq_add_cloud_filters_big_buffer to
i40e_aq_add_cloud_filters_bb
- i40e_aq_remove_cloud_filters_big_buffer to
i40e_aq_rem_cloud_filters_bb
- i40e_aq_remove_cloud_filters to
i40e_aq_rem_cloud_filters
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add new admin queue definitions and extended fields for cloud
filter support. Define big buffer for extended general fields
in Add/Remove Cloud filters command.
Also rename i40e_aqc_add_remove_cloud_filters_element_data to
i40e_aq__cloud_filters_element_data.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add definitions for L4 filters and switch modes based on cloud filters
modes and extend the set switch config command to include the additional
cloud filter mode.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch overwrites number of ports for X722 devices with support for
OCP PHY mezzanine. The old method with checking if port is disabled in
the PRTGEN_CNF register cannot be used in this case. When the OCP is
removed, ports were seen as disabled, which resulted in wrong calculation
of partition id, that caused WoL to be disabled on certain ports.
Fixes: 3c89193a36fd ("i40e/base: support WOL config for X722")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The driver setting of "allow_experimental_apis" was not being used when
building the base code. To allow this we can manually put in a check
in the base code files for the setting and set the appropriate cflag
if it's needed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Tested-by: Ilya Maximets <i.maximets@samsung.com>
This PMD is built with -Wno-format, which means GCC errors out if
-Wformat-security is used.
Fixes: e940646b20fa ("drivers/net: build Intel NIC PMDs with meson")
Cc: stable@dpdk.org
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Following error reported by cppcheck:
(error) Shifting signed 32-bit value by 31 bits is
undefined behaviour. The patch fixes it.
Fixes: 8db9e2a1b232 ("i40e: base driver")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This reverts commit 7b7711bea5f4 ("net/i40e/base: enhance loopback
AQ command").
It was to support multiple type of loopbacks, which results to
configuration error about adminq. So revert it as agreed.
Fixes: 7b7711bea5f4 ("net/i40e/base: enhance loopback AQ command")
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch changes the build process to group all .o files for a driver or
library into a static archive first, and then link the .o files together
into a shared library. This eliminates the need for separate static or
shared object builds when packaging, for instance.
The "default_library" configuration option now only affects the apps and
examples, which are either linked against the static or shared library
versions depending on the value of the option.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The EAL and compat libraries were special-cases in the library build
process, the former because of it's complexity, and the latter because
it only consists of a single header file.
By reworking the EAL meson.build files, we can eliminate the need for it to
be a special case, by having it build up and return the list of sources,
headers, and objects and return those to the higher level build file. This
should also simplify the building of EAL, as we can eliminate a number of
meson.build files that would no longer be needed, and have fewer, but
larger meson.build files (9 now vs 14 previous) - thereby making the logic
easier to follow and items easier to find.
Once done, we can pull eal into the main library loop, with some
modifications to support it. Compat can also be pulled it once we add in a
check to handle the case of an empty sources list.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Add the e1000, fm10k, i40e and ixgbe drivers to the meson & ninja build.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Rename virtchnl_vf_resource's vf_offload_flags to vf_cap_flags.
The new name is more generic, so more than just offloading
capabilities can be added.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This fix prevents errors or warnings while accessing unaligned 32-bit
data words on non-x86 platforms during getting link info from firmware.
Fixes: e8228f1a16b7 ("net/i40e/base: report supported link modes")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Previous method for reading LLDP config was based on hard-coded offsets.
It happened to work, because of structured architecture of the NVM memory.
In the new approach, known as FLAT, we need to calculate the absolute
address, instead of using relative values. Needed defines for memory
location were added.
Fixes: 8db9e2a1b232 ("i40e: base driver")
CC: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
When using GCC 6.3.0 and EXTRA_CFLAGS=-Og, the compiler is not smart
enough to see that when you have an integrated VF that just one of the
if statemets has to be true so that ntu is always set. Fix the way that
the code is for integrated VFs so that the compiler won't complain.
Fixes: 9783eb15eb98 ("i40e/base: wrap the register definitions for PF and VF")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The FW has the ability to return a critical error on every AQ command.
So add the new return type as critical error to sync with firmware.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add new AQ command that help to inform software how advanced
rearrangement process is.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
New control bits were defined for flat NVM structure.
One for pointing which NVM bank is currently used and
one used as indicator of structure type.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This fix solves an issue occurring while calling i40e_led_set function
from the driver with "blink" parameter set as TRUE. This call resulted
in Activity LED blinking instead of Link LED, which may lead to errors
in physically identyfying the port, since Activity LED may be blinking
for different reasons aswell.
Fixes: 51b27bc5d898 ("i40e/base: update LED blinking")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch adds new I40E_NVMUPD_GET_AQ_EVENT state
to allow retrieval of AdminQ events as a result.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add preservation flags support on X722 devices for NVM update AdminQ
function wrapper. Add new parameter and handling to nvm update admin
queue function intended to allow nvmupdate tool to configure the
preservation flags in the AdminQ command.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
1. Cleanup logical in __i40e_read_nvm_word and reuse it in
i40e_read_nvm_word.
2. Change couple functions to static so we can remove uncessary function
declarations
3. Cleanup logical in i40e_validate_nvm_checksum.
4. Add more debug information in PF reset
5. correct comments
6. Minor code style fix.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
NVM lock is only required at below situation:
1. its X722 device or
2. API version >= 1.5
or may have issue at firmware downgrade.
Fixes: c5846a125b26 ("net/i40e/base: fix NVM access interfering")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add new Adminq command i40e_aqc_opc_set_dcb_parameters that
helps to get DCB parameters in data structure i40e_aqc_set_dcb_parameters.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
