Do a global replace of snprintf(..."%s",...) with strlcpy, adding in the
rte_string_fns.h header if needed. The function changes in this patch were
auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy.cocci --dir . --in-place
and then the files edited using awk to add in the missing header:
gawk -i inplace '/include <rte_/ && ! seen { \
print "#include <rte_string_fns.h>"; seen=1} {print}'
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
There is a corner case in which driver won't post
receive buffers when driver has processed all received packets
in single loop (i.e. hw_consumer == sw_consumer) and then
HW will start dropping packets since it did not see new receive
buffers posted.
This corner case is seen when size of Rx ring is less than or equals
Rx packet burst count for dev->rx_pkt_burst().
Fixes: 8f23124745 ("net/qede: fix performance bottleneck in Rx path")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Set RTE_PCI_DRV_IOVA_AS_VA in drv_flags. This allows initializing qede
PMD as non-root also on Linux v4.x, where /proc/self/pagemap can't be
acccessed without CAP_SYS_ADMIN privileges.
The flag was introduced generically but not in pmds in:
commit 815c7deaed ("pci: get IOMMU class on Linux")
Cc: stable@dpdk.org
Acked-by: Shahed Shaikh <shshaikh@marvell.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Shifting signed 32-bit values by 31-bits has the potential for
unexpected outcomes as compiler can overwrite a bit.
Specified that values are unsigned.
Errors are observed from running cppcheck.
Bugzilla ID: 58
Fixes: 69e209be54 ("net/axgbe: add register map and related macros")
Fixes: b5bf771922 ("bnx2x: driver support routines")
Fixes: ed2ced6fe9 ("net/bnxt: check initialization before accessing stats")
Fixes: 6fda3f0ddd ("net/cxgbe: add API to program hardware MPS table")
Fixes: bdb244b969 ("e1000: whitespace changes")
Fixes: 5a32a257f9 ("e1000: more NICs in base driver")
Fixes: 2fe669f4bc ("net/nfp: support MAC address change")
Fixes: defb9a5dd1 ("nfp: introduce driver initialization")
Fixes: ec94dbc573 ("qede: add base driver")
Fixes: d2e7d931d0 ("net/qede/base: formatting changes")
Fixes: cdc07e83bb ("net/tap: add eBPF program file")
Cc: stable@dpdk.org
Signed-off-by: Andrius Sirvys <andrius.sirvys@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch fixes a regression introduced by
commit 49d3978d57 ("net/qede: fix Tx tunnel offload support mask")
in which qede_xmit_prep_pkts() breaks the loop for successful
check of Tunneling offload flags instead of continuing, resulting
in tx_pkt_prepare return a failure.
Fixes: 49d3978d57 ("net/qede: fix Tx tunnel offload support mask")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Incorrect placement of prefetch in Tx path is causing
a performance drop of around ~2% on AMD platform.
Fixes: 2ea6f76aff ("qede: add core driver")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Allocating replacement buffer per received packet is expensive.
Instead, process received packets first and allocate
replacement buffers in bulk later.
This improves performance by ~25% in terms of PPS on AMD
platforms.
Fixes: 2ea6f76aff ("qede: add core driver")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Following commit updated the Tx offload mask
commit 1037ed842c ("mbuf: fix Tx offload mask").
So, not having PKT_TX_IPV6 and PKT_TX_IPV4 in qede PMDs supported
Tx offload mask breaks TSO support since application will fail in transmit
prepare function.
Fixes: 1037ed842c ("mbuf: fix Tx offload mask")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
Tunneling offloads are represented by multi-bit values. So, feature
wise tunneling offload can only be entirely supported/unsupported
using PKT_TX_TUNNEL_MASK. Its upon PMDs to further isolate which of
the tunneling offload types are supported by respective PMD.
Using subset of bits from PKT_TX_TUNNEL_MASK to indicate supported vs
unsupported offloads can lead to undesired result.
Use PKT_TX_TUNNEL_MASK in QEDE_TX_OFFLOAD_MASK and use independent
value of supported PKT_TX_TUNNEL_* in .tx_pkt_prepare() to mark
supported tunnel offloads.
Fixes: 44346c24b7 ("net/qede: fix VXLAN tunnel Tx offload flag setting")
Cc: stable@dpdk.org
Suggested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
Reviewed-by: Rasesh Mody <rasesh.mody@cavium.com>
Currently, if configuration fails (for example if a 100G card is used
with an odd number of RX/TX queues) QEDE crashes due to a null pointer
dereference.
This commit fixes it by checking that the pointer is not NULL before
using it.
Fixes: 7105b24f4b ("net/qede: fix memory alloc for multiple port reconfig")
Cc: stable@dpdk.org
Signed-off-by: Timothy Redaelli <tredaelli@redhat.com>
Acked-by: Rasesh Mody <rasesh.mody@cavium.com>
During initialization of leading PF, we need to initialize HW for LLH
filters. Set HW init parameter to set the engine affinity for
multiple engine adapters.
Fixes: 3eed444a96 ("net/qede/base: changes for 100G")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Some global variables are defined with generic names, add component name
as prefix to variables to prevent collusion with application variables.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Some global variables can indeed be static, add static keyword to them.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This functionality was missed while adding new drivers to
the meson build.
Fixes: bfabd06000 ("net/avf: support meson build")
Fixes: 30d3d01683 ("net/qede: add in meson build")
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This is a clean-up of common ethdev data freeing.
All data freeing are moved to rte_eth_dev_release_port()
and done only in case of primary process.
It is probably fixing some memory leaks for PMDs which were
not freeing all data.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Now that logging of initialization is controlled by dynamic debug
level, remove the #ifdef for RTE_LIBRTE_QEDE_DEBUG_INIT since that
config option does not exist in common_base and is not documented.
Fixes: 69b6573980 ("net/qede: implement dynamic logging")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add APIs for dscp priority map configuration. APIs added are
ecore_dcbx_get_dscp_priority(), ecore_dcbx_set_dscp_priority().
These base driver APIs can be used for dscp-map query/config.
Configure the doorbell queue (DORQ) to use vlan-id/priority.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add 'rl_bc_stage_th','rl_timer_stage_th' and 'dcqcn_reset_alpha_on_idle'
to RL update param as well as logs.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Change details:
- Get engine affinity from the management FW and configure accordingly
- Add an LLH filter with the primary MAC address in QPAR/NPAR
- Move some of the LLH APIs around
- Add PPFID APIs
- Update all allocated ppfids with the same value for the
following PORT_PF registers:
NIG_REG_DSCP_TO_TC_MAP_ENABLE
- Add port_id, src_pfid and dst_pfid to DMA engine params
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Request management FW for OEM values, which are negotiated prior to
the driver load by sending the GET_OEM_UPDATES command after both
engines are initialized.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add a pretend function for port/PF, pretend to another port and another
function when accessing the ptt window
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Modified queue manager getter APIs to cycle through their range if
index is higher than max. This prevents accessing index out of bounds.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Added ecore_update_eth_rss_ind_table_entry() api to update FW RSS
indirection table entry according to new interface of FW 8.37.x.x.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
The driver can notify that there was an MCP reset and read the SHMEM
values before the management FW has completed initializing them.
As a temporary solution, the "sup_msgs" field is used as a SHMEM data
ready indication. This should be replaced with an actual indication
when it is provided by the management FW.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add DPC sync after stopping the physical funciton to allow clean up of
asyncronous events. Post this the driver don't expect the FW to send
async events.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Management firmware does not properly clean IGU block in PF FLR flow
which may result in undelivered attentions for link events from
default status block.
Add a workaround in PMD to execute extra IGU cleanup right after PF FLR
is done.
Fixes: 9e2f08a4ad ("net/qede/base: add request for PF FLR before load request")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
This patch implement eth_dev_ops->rx_descriptor_status
callback.
Walk through receive completion ring to calculate receive
descriptors used by firmware and then provide the status of
offset accordingly.
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
- HW does not include CRC in received frame when passed to host,
so no need to consider CRC length while calculating Rx buffer size.
- In scattered Rx mode, driver may allocate Rx buffer larger than
the size of mbuf because it tries to adjust the buffer size to cache
line size by ceiling it. Fix this by flooring the size instead of
ceiling.
- Consider the rule imposed by HW regarding the minimum size of Rx buffer
in scattered Rx mode -
(MTU + Maximum L2 Header Size + 2) / ETH_RX_MAX_BUFF_PER_PKT
Fixes: f6033f2497 ("net/qede: fix minimum buffer size and scatter Rx check")
CC: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
- Add support for rte_flow_validate(), rte_flow_create() and
rte_flow_destroy() APIs
- This patch adds limited support for the flow items
because of the limited filter profiles supported by HW.
- Only 4 tuples - src and dst IP (v4 or v6) addresses and
src and dst port IDs of TCP or UDP.
- also, only redirect to queue action is supported.
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
- In order to prepare the base for RTE FLOW support,
convert common code used for flow director support
into common aRFS code.
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
- PMD does not fill vtc_flow field of IPv6 header while
constructing a packet for IPv6 filter. Hence filter was
not getting applied properly.
- IPv6 addresses got swapped while copying src and dst addresses.
- Same issue with UDP and TCP port ids.
Fixes: 622075356e ("net/qede: support ntuple and flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
When trust mode is set to ON, VF can change it's MAC address
inspite PF has set a forced MAC for that VF from HV.
Earlier similar functionality is provided by module parameter
"allow_vf_mac_change_mode" of qed.
This change makes few changes in behavior of VF shadow config -
- Let driver track the VF mac in shadow config as long as trust
mode is OFF.
- Once trust mode is ON, we should not care about MACs in shadow
config (because we never intend to fall back because of lack of restore
implementation).
- Delete existing shadow MAC (this helps when trust mode is turned OFF,
and VF tries to add new MAC – it won’t fail that time since we have
a clean slate).
- Skip addition and deletion of MACs in shadow configs.
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
Fix logic for sfp get rx_los, tx_fault, tx_disable, and sfp set tx_disable.
Fixes: bdc40630a8 ("net/qede/base: add APIs for xcvr")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Limit the number of non ethernet queues to 64, allowing a max queues to
status block ratio of 2:1 in case of storage target. Theoretically a
non-target storage PF can have 128 queues and SBs.
This change is to support 64 entries for a target iSCSI/FCoE PF and 128
for a non-target.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Fix to program the HW registers with proper ether type.
Fixes: 36f45bce25 ("net/qede/base: fix to support OVLAN mode")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add support for the following OneView APIs:
- ecore_mcp_ov_update_mtu() - Send MTU value to the management FW.
- ecore_mcp_ov_update_mac() - Send MAC address to the management FW.
- ecore_mcp_ov_update_eswitch() - Send eswitch_mode to management FW
after the firmware load.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
