The old design was using the bit mask to identify
items, action and attributes.
So it was all based on the order of the code itself,
to place the order of the actions, items & attributes
inside the flows. Such design will lead into many failures
when some PMD support order different than other PMD,
in the end the rules will fail to create. Also sometimes
the user needs to have one action before other actions
and vice versa, so using new design of arrays that
take user order into consideration make more sense.
After this patch, we start supporting inner items
and more than one instance of same action.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Alexander Kozyrev <akozyrev@nvidia.com>
Actions have it's own macro which is FLOW_ACTION_MASK
Fixes: bf3688f1e8 ("app/flow-perf: add insertion rate calculation")
Cc: stable@dpdk.org
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Alexander Kozyrev <akozyrev@nvidia.com>
Add TM command to enable packet mode for all SP children
in non leaf node. This is a new command as
"add tm nonleaf node pktmode".
Also add support to shaper profile add command to take
packet mode parameter used to setup shaper in packet mode.
This adds an extra argument "packet_mode" to shaper profile add command
"add port tm node shaper profile" as last argument.
This patch also dumps new tm port/level/node capabilities
sched_wfq_packet_mode_supported, sched_wfq_byte_mode_supported,
shaper_private_packet_mode_supported, shaper_private_byte_mode_supported,
shaper_shared_packet_mode_supported, shaper_shared_byte_mode_supported.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
'_rte_eth_dev_callback_process()' & '_rte_eth_dev_reset()' internal APIs
has unconventional underscore ('_') prefix.
Although this is not documented most probably this is to mark them as
internal. Since we have '__rte_internal' flag to mark this, removing '_'
from API names.
For '_rte_eth_dev_reset()', there is already a public API named
'rte_eth_dev_reset()', so renaming '_rte_eth_dev_reset()' to
'rte_eth_dev_internal_reset'.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
This commit fixes a potential race condition in the tests
where the lcore running a service would increment a counter
that was already reset by the test-suite thread. The resulting
race-condition incremented value could cause CI failures, as
indicated by DPDK's CI.
This patch fixes the race-condition by making use of the
added rte_service_lcore_active() API, which indicates when
a service-core is no longer in the service-core polling loop.
The unit test makes use of the above function to detect when
all statistics increments are done in the service-core thread,
and then the unit test continues finalizing and checking state.
Fixes: f28f3594de ("service: add attribute API")
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Currently with the rawdev API there is no way to check that the structure
passed in via the dev_private pointer in the dev_info structure is of the
correct type - it's just checked that it is non-NULL. Adding in the length
of the expected structure provides a measure of typechecking, and can also
be used for ABI compatibility in future, since ABI changes involving
structs almost always involve a change in size.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
A decision was made [1] to no longer support Make in DPDK, this patch
removes all Makefiles that do not make use of pkg-config, along with
the mk directory previously used by make.
[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The testpmd application forwards data in multiple threads.
In the txonly mode the Tx timestamps must be initialized
on per thread basis to provide phase shift for the packet
burst being sent. This per thread initialization was performed
on zero value of the variable in thread local storage and
happened only once after testpmd forwarding start. Executing
"start" and "stop" commands did not cause thread local variables
zeroing and wrong timestamp values were used.
Fixes: 4940344dab ("app/testpmd: add Tx scheduling command")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Following the new RegEx class.
There is a need to create a dedicated test application in order to
validate this class and PMD.
Unlike net device this application loads data from a file.
This commit introduces the new RegEx test app.
The basic app flow:
1. Configure the RegEx device to use one queue, and set the rule
database, using precompiled file.
2. Allocate mbufs based on the requested number of jobs, each job will
i get one mbuf.
3. Enqueue as much as possible jobs.
4. Dequeue jobs.
5. if the number of dequeue jobs < requested number of jobs job to step
Signed-off-by: Ori Kam <orika@mellanox.com>
Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
This patch adds support for DOCSIS and PDCP security protocols to the
pmd-cyclecount mode of the crypto performance tool. Adding this support
involves freeing the correct session type (i.e. security or cryptodev
session) when the test ends, depending on the op_type specified.
Signed-off-by: David Coyle <david.coyle@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Set the source mbuf data and packet lengths correctly for DOCSIS
performance tests.
Fixes: d4a131a949 ("test/crypto-perf: support DOCSIS protocol")
Signed-off-by: David Coyle <david.coyle@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
test_delay_us_sleep registers sleep based delay for testing.
This changes the default delay function of testing environment.
It is not expected.
Restore default delay function after the test to fix the issue.
Fixes: a51639cc72 ("eal: add nanosleep based delay function")
Cc: stable@dpdk.org
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Prepare for python2 removal in 20.11.
Signed-off-by: Louise Kilheeney <louise.kilheeney@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>
Use of the print function required for python3 compatibility.
Signed-off-by: Louise Kilheeney <louise.kilheeney@intel.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>
When using --lcores option, there is a limit of CPU_SETSIZE.
Currently that allows 0..1023 on Linux.
Check it is caught when this limit is exceeded.
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
blockcipher cases are either returning TEST_SUCCESS
or TEST_FAILED as status, but the test may not be
supported by the PMD which is also a success case
for the PMD. Hence checking for status == TEST_FAILED
for setting the overall status as failed.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Ankur Dwivedi <adwivedi@marvell.com>
This patch fix the error line break in the output format of flow query
Fixes: bdb1d61690 ("app/testpmd: support RSS config in flow query")
Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Tested-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The RTE_CRYPTODEV_FF_SECURITY feature was disabled through the
ff_disable device configuration option for all crypto performance tests,
including security related tests. This patch updates the crypto
performance tool to not disable RTE_CRYPTODEV_FF_SECURITY for DOCSIS and
PDCP security tests.
Fixes: d4a131a949 ("test/crypto-perf: support DOCSIS protocol")
Signed-off-by: David Coyle <david.coyle@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The RTE_CRYPTODEV_FF_SECURITY feature was disabled through the
ff_disable device configuration option for all cryptodev tests,
including security related tests. This patch updates the cryptodev unit
tests to not disable RTE_CRYPTODEV_FF_SECURITY for DOCSIS and PDCP
security tests.
Fixes: ea31f2b4f5 ("test/crypto: add DOCSIS security cases")
Signed-off-by: David Coyle <david.coyle@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The AESNI-MB CPU test cases, which are executed via the
cryptodev_cpu_aesni_mb_autotest command, aborted when it tried to run
the DOCSIS security tests as these are not CPU type tests. The abort
happened at the following line in process_crypto_request():
RTE_VERIFY(gbl_action_type != RTE_SECURITY_ACTION_TYPE_CPU_CRYPTO);
The tests have been updated not to run the DOCSIS (or PDCP) security
tests during cryptodev_cpu_aesni_mb_autotest, with the decision based on
improved PMD security capability checks.
Fixes: ea31f2b4f5 ("test/crypto: add DOCSIS security cases")
Signed-off-by: David Coyle <david.coyle@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
In the IPSEC ESN test vector the cipher offset for encryption
should be 8 bytes which is the size of esp header.
This patch also changes the ciphertext and the digest reference
data against which the operation result is validated.
Fixes: 699741912d ("test/crypto: add case for auth only trailer")
Cc: stable@dpdk.org
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The hairpin queue is the one that start from normal rxq,
and will be less than nr_queues where nr_queues is the
sum of normal and hairpin.
Fixes: bf3688f1e8 ("app/flow-perf: add insertion rate calculation")
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Reviewed-by: Asaf Penso <asafp@mellanox.com>
In order to verify offloading of eCPRI protocol via flow rules, the
command line of flow creation should support the parsing of the eCPRI
pattern.
Based on the specification, one eCPRI message will have the common
header and payload. Payload format is various based on the type field
of the common header. Fixed strings will be used instead of integer
to make the CLI easy for auto-completion.
The testpmd command line examples of flow to match eCPRI item are
listed below:
1. flow create 0 ... pattern eth / ecpri / end actions ...
This is to match all eCPRI messages.
2. flow create 0 ... pattern eth / ecpri common type rtc_ctrl / end actions ...
This is to match all eCPRI messages with the type #2 - "Real-Time
Control Data".
3. flow create 0 ... pattern eth / ecpri common type iq_data pc_id is [U16Int] / end actions ...
This is to match eCPRI messages with the type #0 - "IQ Data", and
the physical channel ID 'pc_id' of the messages is a specific
value. Since the sequence ID is changeable, there is no need to
match that field in the flow.
Currently, only type #0, #2 and #5 will be supported.
Since eCPRI could be over Ethernet layer (or after .1Q) and UDP
layer, it is the PMD driver's responsibility to check whether eCPRI
is supported and which protocol stack is supported. Network byte
order should be used for eCPRI header, the same as other headers.
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
The new 5-tuple swap engine swaps:
source and destination mac address,
source and destination address in ipv4/ipv6,
source and destination port in UDP/TCP.
The forwarding engine will parse each layer
and swap it, and will stop when the next
layer doesn't match.
The mentioned headers of ICMP/ARP/Multicast
packets will be swapped as well according to
matching layers.
usage: --forward-mode=5tswap
Signed-off-by: Shiri Kuzin <shirik@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Using '__rte_internal' tag in 'rte_ethdev_driver.h' causing build error
for applications and examples. Because they don't define
'ALLOW_INTERNAL_API' flag and '__rte_internal' causes the error.
This patch is preparation for future '__rte_internal' usage.
At first place, applications/examples should not include
'rte_ethdev_driver.h', this is happening because of PMD public header
files include 'rte_ethdev_driver.h' by mistake.
Updated PMD public header files to not include internal header files.
But for unit test application, 'app/test', enable accessing internal
APIs, since some unit tests need them.
Fixes: ffc905f3b8 ("ethdev: separate driver APIs")
Fixes: ec0dec44ec ("net/atlantic: enable MACsec configuration")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This commit adds testpmd capability to provide timestamps on the packets
being sent in the txonly mode. This includes:
- SEND_ON_TIMESTAMP support
new device Tx offload capability support added, example:
testpmd> port config 0 tx_offload send_on_timestamp on
- set txtimes, registers field and flag, example:
testpmd> set txtimes 1000000,0
This command enables the packet send scheduling on timestamps if
the first parameter is not zero, generic format:
testpmd> set txtimes (inter),(intra)
where:
inter - is the delay between the bursts in the device clock units.
If "intra" (next parameter) is zero, this is the time between the
beginnings of the first packets in the neighbour bursts, if "intra"
is not zero, "inter" specifies the time between the beginning of
the first packet of the current burst and the beginning of the last
packet of the previous burst. If "inter"parameter is zero the send
scheduling on timestamps is disabled (default).
intra - is the delay between the packets within the burst specified
in the device clock units. The number of packets in the burst is
defined by regular burst setting. If "intra" parameter is zero no
timestamps provided in the packets excepting the first one in the
burst.
As the result the bursts of packet will be transmitted with
specific delay between the packets within the burst and specific
delay between the bursts. The rte_eth_read_clock() is supposed to
be engaged to get the current device clock value and provide the
reference for the timestamps. If there is no supported
rte_eth_read_clock() there will be no provided send scheduling on
the device.
- show txtimes, displays the timing settings
- txonly burst time pattern
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In txonly and flowgen forwarding mode, calculating CPU per packets with
total received packets is not accurate. Use total transmitted packets
for these cases.
The error output under txonly mode:
testpmd> show fwd stats all
---------------------- Forward statistics for port 0 -------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 3582891927 TX-dropped: 401965824 TX-total: 3984857751
TX-bursts : 86381636 [0% of 0 pkts + 85% of 64 pkts + 15% of 32 pkts]
-------------------------------------------------------------------------
---------------------- Forward statistics for port 1 -------------------
RX-packets: 1 RX-dropped: 394351696 RX-total: 394351697
TX-packets: 3582890632 TX-dropped: 401965568 TX-total: 3984856200
TX-bursts : 86381679 [0% of 0 pkts + 85% of 64 pkts + 15% of 32 pkts]
-------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++
RX-packets: 1 RX-dropped: 394351696 RX-total: 394351697
TX-packets: 7165782559 TX-dropped: 803931392 TX-total: 7969713951
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
CPU cycles/packet=54984156291.00 \
(total cycles=54984156291 / total RX packets=1) at 200 MHz Clock
Fixes: 53324971a1 ("app/testpmd: display/clear forwarding stats on demand")
Cc: stable@dpdk.org
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Softnic can be used like other virtual devices without
needing any special mode. Therefore, remove softnic mode
from testpmd app. Documentation is updated as well.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch support RSS action in flow query.
It can display the RSS configuration of the specified rule.
For example:
we can create an RSS rule by command "flow create 0 ingress
pattern eth / ipv4 / tcp / end actions rss types ipv4-tcp
l3-src-only l4-dst-only end queues end func symmetric_toeplitz
/ end" and then query it "flow query 0 0 rss"
the log will be follow
RSS:
queues: none
function: symmetric_toeplitz
types:
ipv4-tcp
l3-src-only
l4-dst-only
Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
The legacy filter API will be superseded. This patch use
private api to change the implementation of commands
global_config <port_id> gre-key-len <key_len> and
show port fdir <port_id>
Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
There is no need to return the defer queue handle in rte_lpm_rcu_qsbr_add,
since enough flexibility has been provided to configure the defer queue.
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Add performance tests for RCU integration. The performance
difference with and without RCU integration is very small
(~1% to ~2%) on both Arm and x86 platforms.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Add positive and negative tests for API rte_lpm_rcu_qsbr_add.
Also test LPM library behavior when RCU QSBR is enabled.
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
The number of empty polls provides information about available
CPU head room in the presence of continuous polling.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Phil Yang <phil.yang@arm.com>
Tested-by: Ali Alnubani <alialnu@mellanox.com>
The burst % calculation can over flow due to multiplication.
Fix the multiplication and increase the size of variables to
64b.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Phil Yang <phil.yang@arm.com>
Tested-by: Ali Alnubani <alialnu@mellanox.com>
The throughput calculation requires a counter that measures
passing of time. However, the kernel saves and restores the PMU
state when a thread is unscheduled and scheduled. This ensures
that the PMU cycles are not counted towards a thread that is
not scheduled. Hence, when RTE_ARM_EAL_RDTSC_USE_PMU is enabled,
the PMU cycles do not represent the passing of time.
This results in incorrect calculation of throughput numbers.
Use clock_gettime system call to calculate the time passed since
last call.
Bugzilla ID: 450
Fixes: 0e10698030 ("app/testpmd: show throughput in port stats")
Cc: stable@dpdk.org
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Phil Yang <phil.yang@arm.com>
Tested-by: Ali Alnubani <alialnu@mellanox.com>
Add testpmd cmdline support for GTPU, it could be used to configure
gtpu teid hash. The commands as below:
testpmd> flow create 0 ingress pattern eth / ipv4 / udp / gtpu / \
ipv4 / end actions rss types gtpu end key_len 0 queues end / end
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds testpmd cmdline support for PPPoE.
Signed-off-by: Simei Su <simei.su@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The rte_service_lcore_reset_all function stops execution of services
on all lcores and switches them back from ROLE_SERVICE to ROLE_RTE.
However the thread loop for slave lcores (eal_thread_loop) distincts these
roles to set lcore state after processing delegated function.
It sets WAIT state for ROLE_SERVICE, but FINISHED for ROLE_RTE.
So changing the role to RTE before stopping work in slave lcores
causes lcores to end in FINISHED state. That is why the rte_eal_lcore_wait
must be run after rte_service_lcore_reset_all to bring back lcores to
launchable (WAIT) state.
This has been fixed in test app and clarified in API documentation.
Setting the state to WAIT in rte_service_runner_func is premature
as the rte_service_runner_func function is still a part of the lcore
function delegated to slave lcore. The state is overwritten anyway in
slave lcore thread loop. This premature setting state to WAIT might
however cause rte_eal_lcore_wait, that was called by the application,
to return before slave lcore thread set the FINISHED state. That's
why it is removed from librte_eal rte_service_runner_func function.
Bugzilla ID: 464
Fixes: 21698354c8 ("service: introduce service cores concept")
Fixes: f038a81e1c ("service: add unit tests")
Cc: stable@dpdk.org
Reported-by: Sarosh Arif <sarosh.arif@emumba.com>
Signed-off-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Add a new option for PDCP cases to enable use of session
based fixed HFN value instead of per packet HFN which was
enabled by hfn override feature.
By default HFN override is enabled and if session based
fixed HFN need to be tested, add "--pdcp-ses-hfn-en" in the
command line.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
As per current framework of PDCP testing, app can only support
either HFN override or fixed session HFN values but not both.
Now to enable both, either we duplicate all PDCP cases(>100)
for both override and fixed HFN. It will look clumsy as the
number of cases will be very high without much value addition.
Now to overcome this, we can do HFN override for Downlink cases
and fixed HFN for uplink cases. This way we will not loose the
test coverage and there will not be duplicacy in the test cases.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch enables the generic crypto tests for OCTEON TX and
OCTEON TX2 PMDs. Removes the PMD specific tests.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch removes the OCTEON TX and OCTEON TX2 PMDs specific
test cases related to null cipher.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add unit tests for DOCSIS capabilitity checks.
Signed-off-by: David Coyle <david.coyle@intel.com>
Signed-off-by: Mairtin o Loingsigh <mairtin.oloingsigh@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add uplink and downlink DOCSIS unit test cases and vectors, to test
the combined DOCSIS Crypto-CRC support that has been added to the
rte_security library.
Signed-off-by: David Coyle <david.coyle@intel.com>
Signed-off-by: Mairtin o Loingsigh <mairtin.oloingsigh@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch fixes the element size of the mempool used
for allocating asym crypto sessions and their private data.
Fixes: 2c6dab9cd9 ("test/crypto: add RSA and Mod tests")
Cc: stable@dpdk.org
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The multiprocess feature has been implicitly enabled so far.
Applications might want to explicitly disable like when using the
non-EAL threads registration API.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add a helper to iterate all lcores.
The iterator callback is read-only wrt the lcores list.
Implement a dump function on top of this for debugging.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
DPDK components and applications can have their say when a new lcore is
initialized. For this, they can register a callback for initializing and
releasing their private data.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
DPDK allows calling some part of its API from a non-EAL thread but this
has some limitations.
OVS (and other applications) has its own thread management but still
want to avoid such limitations by hacking RTE_PER_LCORE(_lcore_id) and
faking EAL threads potentially unknown of some DPDK component.
Introduce a new API to register non-EAL thread and associate them to a
free lcore with a new NON_EAL role.
This role denotes lcores that do not run DPDK mainloop and as such
prevents use of rte_eal_wait_lcore() and consorts.
Multiprocess is not supported as the need for cohabitation with this new
feature is unclear at the moment.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The test checks that the service may be active API works
when there are two cores: a non-service lcore and a service one.
The API notes to take care when checking the status of a running
service, but the test setup allows for a safe usage in that case.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
This commit fixes the setting of relative rpath on dpdk-test for
drivers ($libdir/dpdk/pmd-$abiver) to the correct absolute rpath
($prefix$libdir/dpdk/pmd-$abiver).
Fixes: b5dc795a8a ("test: build app with meson as dpdk-test")
Cc: stable@dpdk.org
Signed-off-by: Timothy Redaelli <tredaelli@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
RTE_TRACE_POINT_DEFINE and RTE_TRACE_POINT_REGISTER must come in pairs.
Merge them and let RTE_TRACE_POINT_REGISTER handle the constructor part.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The node library had a need of being linked as a whole
to make some constructors effective.
Now that all libraries are linked with --whole-archive,
there is no need to have this library separate.
Fixes: e2db26f766 ("build: always link whole DPDK static libraries")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Introduce the RTE_LOG_REGISTER macro to avoid the code duplication
in the logtype registration process.
It is a wrapper macro for declaring the logtype, registering it and
setting its level in the constructor context.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Rename test_ring_peek_stress to test_ring_mt_peek_stress to
keep same naming conventions for ST and MT test cases.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Introduce new test case to test ST peek API.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Rework test code to reduce code complexity for the compiler and
bring down compilation time and memory consumption.
Current test_ring_enqueue/test_ring_dequeue functions contain
too many branches and it takes compiler a lot of effort to resolve all
of them at compile time.
So the patch replaces these branchy function invocations
with an array of function pointers (test_enqdeq_impl[]).
That way compiler knows straightway which function to use
for each particular case.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Since all libraries are explicitly linked as part of a build, we no longer
need to track ones that should be always included for linking against apps.
Previously telemetry was special-cased for linking as it was not directly
needed by the linker when linking the apps, since they never called into it
directly. This meant that it could be forgotten when specifying the app
dependencies, and so the telemetry support would not work. This
special-casing was never needed for make as it always linked in all
libraries, as meson does now.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Sunil Pai G <sunil.pai.g@intel.com>
To ensure all constructors are included in static build, we need to pass
the --whole-archive flag when linking, which is used with the
"link_whole" meson option. Since we use link_whole for all libs, we no
longer need to track the lib as part of the static dependency, just the
path to the headers for compiling.
After this patch is applied, all DPDK .a files are inside
--whole-archive/--no-whole-archive flags, but external dependencies and
shared libs being linked against remain outside.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Andrzej Ostruszka <aostruszka@marvell.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Sunil Pai G <sunil.pai.g@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
If the bonding pmd is disabled, all autotest associated with it should be
disabled. However, some of those tests also depended upon the ring PMD so
were placed in a block depending on that driver - and unfortunately that
driver alone. This caused build failures if the ring PMD was enabled but
the bonding PMD disabled, due to missing header files and driver libs.
This error can be reproduced by configuring DPDK using e.g.
meson configure -Ddisable_drivers=net/[!r]* build
(which will disable all drivers not starting with "r"), and then building
using ninja.
Fix this by moving all link bonding autotests to the one block and putting
a second conditional check within that block for those also requiring the
ring PMD.
Fixes: 7f6ef16640 ("test/bonding: allow disabling driver")
Fixes: 207b1c813f ("test: fix build without ring PMD")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
In size 32 bulk ring enq/dequeue performance test, the "Total count"
statistics is incorrect. For example, running the test on lcore 25 and
lcore 26, the output is as follows:
The test command:
$sudo ./arm64-armv8a-linuxapp-gcc/app/test -l 25-26
RTE>>ring_perf_autotest
Bulk enq/dequeue count on size 32
Core [25] count = 288268
Core [26] count = 288281
Total count (size: 32): 1066323
Fixed it by reset the counter at the beginning of each loop. The
revised output is as follows:
Bulk enq/dequeue count on size 32
Core [25] count = 285643
Core [26] count = 285688
Total count (size: 32): 571331
Fixes: 759cf9b563 ("test/ring: enhance mp/mc coverage")
Cc: stable@dpdk.org
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The macro __rte_cache_aligned is better suited for aligning
a structure on a cache line (of any size).
Fixes: 15c4318640 ("app/flow-perf: add packet forwarding support")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Wisam Jaddo <wisamm@mellanox.com>
Introduce packet forwarding support to the app to do
some performance measurements.
The measurements are reported in term of packet per
second unit. The forwarding will start after the end
of insertion/deletion operations.
The support has single and multi performance measurements.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Xiaoyu Min <jackmin@mellanox.com>
Introduce new feature to dump memory statistics of each socket
and a total for all before and after the creation.
This will give two main advantage:
1- Check the memory consumption for large number of flows
"insertion rate scenario alone"
2- Check that no memory leackage after doing insertion then
deletion.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Xiaoyu Min <jackmin@mellanox.com>
Add the ability to test deletion rate for flow performance
application.
This feature is disabled by default, and can be enabled by
add "--deletion-rate" in the application command line options.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Xiaoyu Min <jackmin@mellanox.com>
Add insertion rate calculation feature into flow
performance application.
The application now provide the ability to test
insertion rate of specific rte_flow rule, by
stressing it to the NIC, and calculate the
insertion rate.
The application offers some options in the command
line, to configure which rule to apply.
After that the application will start producing
rules with same pattern but increasing the outer IP
source address by 1 each time, thus it will give
different flow each time, and all other items will
have open masks.
The current design have single core insertion rate.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Xiaoyu Min <jackmin@mellanox.com>
Caught by code review, bitops test name is incorrect.
Fixes: 7660614c11 ("test/bitops: add bit operations test case")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Phil Yang <phil.yang@arm.com>
To fill the gap with linux kernel eBPF implementation,
add support for two non-generic instructions:
(BPF_ABS | <size> | BPF_LD) and (BPF_IND | <size> | BPF_LD)
which are used to access packet data.
These instructions can only be used when BPF context is a pointer
to 'struct rte_mbuf' (i.e: RTE_BPF_ARG_PTR_MBUF type).
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Address for few small issues:
- unreachable return statement
- failed test-case can finish with 'success' status
Also use unified cmp_res() function to check return value.
Cc: stable@dpdk.org
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
MTU is used in testpmd to set the maximum payload size for packets.
According to testpmd, the setting influence RX only.
In rte_ethdev there's no relation between MTU setting and JUMBO offload
or rx_max_pkt_len.
The previous fix in patch referenced below was meant to update the
correlated variables of max_pkt_len and JUMBO offload, but by doing so
it assumes that MTU setting can only exist when JUMBO offload supported
in the device. For example fail-safe device does supports set MTU and
doesn't support JUMBO offload, and in this case, though set MTU
succeeds, an error message is still printed since the JUMBO packet
offload is disabled.
The fix separates the two conditions to make sure the error
triggers only in case the set_mtu action actually failed.
Fixes: 150c9ac2df ("app/testpmd: update Rx offload after setting MTU")
Cc: stable@dpdk.org
Signed-off-by: Shy Shyman <shys@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Add test cases for setting bit, clearing bit, testing
and setting bit, testing and clearing bit operation.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
There are coverity defects related "Argument cannot be negative"
This patch fixes them by passing '-ret' to the function strerror() when
ret is negative.
Coverity issue: 349913, 358437, 358449, 358450
Fixes: da328f7f11 ("ethdev: change xstats reset function to return int")
Fixes: 9eb974221f ("app/testpmd: fix statistics after reset")
Cc: stable@dpdk.org
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Check returned value after strtok()
CID 355674 (#1 of 1): Dereference null return value (NULL_RETURNS)
4. dereference: Dereferencing a pointer that might be NULL s when
calling inet_pton
Fixes: 103809d032 ("app/test-fib: add test application for FIB")
Cc: stable@dpdk.org
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Both bitratestats_autotest latency test initializes the metrics library.
It should be cleaned during exit.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: David Marchand <david.marchand@redhat.com>
When set DCB in testpmd, there is a segmentation fault. It is
because the local variable rss_conf in get_eth_dcb_conf()
is not cleared, so that the pointer member variable rss_key has
a random address, which leads to an error in the following
processing. This patch initialized the local variable rss_conf
to avoid this situation.
Fixes: ac7c491c3f ("app/testpmd: fix DCB config")
Cc: stable@dpdk.org
Signed-off-by: Ting Xu <ting.xu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Change printing of CPU cycles/packet to include fractional part for
accurateness.
Example:
Without patch:
CPU cycles/packet=14
(total cycles=4899533541 / total RX packets=343031966)
With patch:
CPU cycles/packet=14.28
(total cycles=4899533541 / total RX packets=343031966)
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
On aarch64 platforms, the cycles are counted using either a
low-resolution generic counter or a high-resolution PMU cycle counter.
Print the clock frequency along with CPU cycles/packet to identify which
cycle counter is being used.
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The test case - test_stats is directly accessing the
cryptodev and its dev_ops which are internal to library
and should not be used directly by the application.
However, the test case is also missing to check for the
error ENOTSUP. It should skip the case if the API returns
ENOTSUP. This patch fixes these two issues.
Fixes: 202d375c60 ("app/test: add cryptodev unit and performance tests")
Cc: stable@dpdk.org
Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Cryptodev doesn't limit the number of descriptors that can be supported
by the PMD.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This is testpmd part of new line cleanup.
Fixes: 002ade70e9 ("app/test: measure cycles per packet in Rx/Tx")
Fixes: ce8d561418 ("app/testpmd: add port configuration settings")
Cc: stable@dpdk.org
Signed-off-by: Ivan Dyukov <i.dyukov@samsung.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
In cmd_ddp_get_list_parsed(), elements of "p_list" are accessed
even after the memory allocation for "p_list" fails.
With this patch, this null pointer dereference is avoided as we
return when there is malloc failure.
Fixes: e088907bb8 ("app/testpmd: add command for getting loaded DDP profiles")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
One new cmdline option `--rx-mq-mode` is added in order to have the
possibility to check whether PMD handle the mq mode correctly or not.
The reason is some NICs need to do different settings based on different
RX mq mode, i.e RSS or not.
With this support in testpmd, the above scenario can be tested easily.
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
There is no way to report back a link speed of 200Gbps.
Adding 200G link speed.
Signed-off-by: Asaf Penso <asafp@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently, when running start/clear stats&xstats/stop command many times
based on testpmd application, there are incorrect forward Rx/Tx-packets
stats as below:
---------------------- Forward statistics for port 0 --------------
RX-packets: 18446744073709544808 RX-dropped: 0 <snip>
TX-packets: 18446744073709536616 TX-dropped: 0 <snip>
--------------------------------------------------------------------
The root cause as below:
1. The struct rte_port of testpmd.h has a member variable "struct
rte_eth_stats stats" to store the last port statistics.
2. When running start command, it execute cmd_start_parsed ->
start_packet_forwarding -> fwd_stats_reset, which call
rte_eth_stats_get API function to save current port statistics.
3. When running stop command, it execute fwd_stats_display, which call
rte_eth_stats_get to get current port statistics, and then minus last
port statistics.
4. If we run clear stats or xstats after start command, then run stop,
it may display above incorrect stats because the current
Rx/Tx-packets is lower than the last saved RX/TX-packets(uint64_t
overflow).
This patch fixes it by clearing last port statistics when executing
"clear stats/xstats" command.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently, there is no way to check the aging event or to get the
current aged flows in testpmd, this patch include those implements, it's
included:
- Add new item "flow_aged" to the current print event command arguments.
- Add new command to list all aged flows, meanwhile, we can set
parameter to destroy it.
Signed-off-by: Dong Zhou <dongz@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
dev info is set but not used in
test_queue_pair_descriptor_setup().
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
In test_queue_pair_descriptor_setup() and
test_device_configure_invalid_queue_pair_ids a QAT specific
check is there, however the test case can be run on any PMD.
Hence removed the unnecessary check.
test_queue_pair_descriptor_setup and
test_device_configure_invalid_queue_pair_ids execution
need to be altered as the valid device values should be
configured in the end so that all other tests can be
executed.
Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
dpaa_sec and dpaa2_sec PMDs can run generic
cryptodev_testsuite. Hence removing the specific
test suites.
Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
cryptodevs which support rte_security PDCP protocol,
can run all PDCP cases if it sets a feature flag
RTE_CRYPTODEV_FF_SECURITY. Previously, only dpaa2_sec
and dpaa_sec test suites were running these tests.
Now it is moved to generic test suite with a check
on the feature flag and the case will be skipped if it
is not supported by the PMD.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
The session init routine rte_cryptodev_sym_session_init(),
could return -ENOTSUP when the requested algo combination
is not supported by the PMD. This should be treated as
unsupported feature.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
There were some PMD specific checks to skip the case if
it is not supported. This patch checks the feature flag
RTE_CRYPTODEV_FF_SYM_SESSIONLESS if PMD supports it or not.
Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Checked the PMD feature flag list to identify if
inplace or OOP SGLs are supported or not. If not supported
the cases are skipped.
Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Skipped the test cases for the PMDs which do not support
RTE_CRYPTODEV_FF_NON_BYTE_ALIGNED_DATA and subsequently
removed the PMD specific checks for running that case.
Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
The session init routine rte_cryptodev_sym_session_init(),
could return -ENOTSUP when the requested algo combination
is not supported by the PMD. This should be treated as
unsupported features. For other return values like -EINVAL
or -ENOMEM the test can be treated as failure.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
For null cipher the iv length should be set to zero.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch disables displaying sample test vector contents when
executing throughput and latency tests as the sample data is not
used in those tests (not copied to input mbuf in order to achieve
better performance).
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Cc: stable@dpdk.org
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
After re-enabling checks for non-implemented ops in non-debug mode
in librte_security set_pkt_metadata and get_userdata functions,
tests verifying proper work of tests can be enabled also.
Signed-off-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add new test-case to measure performance of
IPsec data-path functions.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This commit fixes failures of the flow_classify_autotest when
ran on dual-socket servers, as the sample application does not
support more than a single socket. Increasing the NB_SOCKETS
value allows the test to run successfully.
Fixes: 9c9befea4f ("test: add flow classify unit tests")
Cc: stable@dpdk.org
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The autotest application build was partially enabled for building with
the net/bond driver disabled, but a number of items were missed, leading
to build errors when the driver was disabled, e.g. by simply doing
"-Ddisable_drivers=net/*" when calling meson.
../app/test/test_link_bonding.c:25:10: fatal error: rte_eth_bond.h: \
No such file or directory
With this fix in place, it's possible to build DPDK with meson with all
non-bus, non-mempool drivers disabled i.e. using meson option
-Ddisable_drivers=baseband/*,compress/*,crypto/*,event/*,net/*,raw/*,vdpa/*
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Tested-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
The size checking is done in the caller. The size parameter is an
unsigned (64b wide) right now, so the comparison with zero should be
enough in most cases. But it won't help in the following case.
If the allocating request input a huge number by mistake, e.g., some
overflow after the calculation (especially subtraction), the checking
in the caller will succeed since it is not zero. Indeed, there is not
enough space in the system to support such huge memory allocation.
Usually it will return failure in the following code. But if the
input size is just a little smaller than the UINT64_MAX, like -2 in
signed type.
The roundup will cause an overflow and then "reset" the size to 0,
and then only a header (128B now) with zero length will be returned.
The following will be the previous allocation header.
It should be OK in most cases if the application won't access the
memory body. Or else, some critical issue will be caused and not easy
to debug. So this issue should be prevented at the beginning, like
other big size failure, NULL pointer should be returned also.
Fixes: fdf20fa7be ("add prefix to cache line macros")
Cc: stable@dpdk.org
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
This commit adds a basic test to check the cycle cost
of related to calling into a service.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Tested-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
The functions added in this patch will make it easier for telemetry
to convert data to correct JSON responses to telemetry requests.
Tests are also added for these json utility functions.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
Invert the current trace point headers logic by making
rte_trace_point_register.h include rte_trace_point.h.
There is no more need for a RTE_TRACE_POINT_REGISTER_SELECT special macro
since including rte_trace_point_register.h itself means we want to
register trace points.
The unexplained "provider" notion is removed from the documentation and
rte_trace_point_provider.h is merged into rte_trace_point.h.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add log infra for node specific logging.
Also, add null rte_node that just ignores all the objects
directed to it.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Add unit test framework to create and test performance of various
graph models.
example command to test:
echo "graph_perf_autotest" | sudo ./build/app/test/dpdk-test -c 0x30
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Adding the unit test to test the functionality of node and graph APIs.
Testing includes registering a node, cloning a node, creating a graph,
perform graph walk, collecting stats and all node and graph debug APIs.
example command to test:
echo "graph_autotest" | sudo ./build/app/test/dpdk-test -c 0x30
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
When having QinQ VLAN headers in the packet, parse_ethernet
is capable of parsing only the first VLAN.
Add parsing for QinQ VLAN headers in the packet.
Fixes: 51f694dd40 ("app/testpmd: rework checksum forward engine")
Cc: stable@dpdk.org
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The EAL options and app-specific options are separated
with double dashes.
The help of testpmd, test-acl and pdump were missing
the dashes after EAL options.
Note: testpmd was completely missing the EAL options.
Fixes: af75078fec ("first public release")
Fixes: 26c057ab6c ("acl: new test-acl application")
Fixes: b2854d5317 ("app/pdump: support multi-core capture")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Implement rte_hash_lookup_with_hash_bulk_data() and
rte_hash_lookup_with_hash_bulk() - bulk lookup
functions with precomputed hash signatures.
Add these two functions into performance tests.
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Yipeng Wang <yipeng1.wang@intel.com>
When users configure rxds and txds by used port config cmd based
on testpmd application, it will not be able to configure rxd and
txd according to the max capability range supported by the actual
NIC hardware. Due testpmd defects, it can only configure a fixed
range to 0 to 2048.
The final result is that an incorrect printing prompt appears and
cannot be applied using rxd && txd according to the actual
capabilities supported by the device.
In order to solve the above problems, we modify the testpmd. First
by calling the rte_eth_dev_info_get api to obtain the max and min
rx/tx capability supported by the hns3, and then use this range
to compare with the actual value by users configured and make
reasonable limitation.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Add some new types, such as eth/l2-src-only/l2-dst-only/svlan/cvlan/
l2tpv3/esp/ah/pfcp types into RSS hash commands, it could be used
to configure these rss input set by cmdline.
Example flow commands was:
testpmd>flow create 0 ingress pattern eth / ipv4 / l2tpv3oip / end \
actions rss types l2tpv3 end key_len 0 queues end / end
port config commands was:
testpmd>port config all rss l2tpv3
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
One of the reasons to destroy a flow is the fact that no packet matches
the flow for "timeout" time.
For example, when TCP\UDP sessions are suddenly closed.
Currently, there is not any DPDK mechanism for flow aging and the
applications use their own ways to detect and destroy aged-out flows.
The flow aging implementation need include:
- A new rte_flow action: RTE_FLOW_ACTION_TYPE_AGE to set the timeout and
the application flow context for each flow.
- A new ethdev event: RTE_ETH_EVENT_FLOW_AGED for the driver to report
that there are new aged-out flows.
- A new rte_flow API: rte_flow_get_aged_flows to get the aged-out flows
contexts from the port.
- Support input flow aging command line in Testpmd.
The new event type addition in the enum is flagged as an ABI breakage,
so an ignore rule is added for these reasons:
- It is not changing value of existing types (except MAX)
- The new value is not used by existing API if the event is not
registered
In general, it is safe adding new ethdev event types at the end of the
enum, because of event callback registration mechanism.
Signed-off-by: Dong Zhou <dongz@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Parse RSS offload types ESP and AH add printf for rss_hf
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
The command line to create RTE flow for specific proto_id of PPPOES can
not work.
It was:
testpmd> flow create 0 ingress pattern proto_id
proto_id [TOKEN]: match PPPoE session protocol identifier
testpmd> flow create 0 ingress pattern proto_id proto_id
proto_id [TOKEN]: match PPPoE session protocol identifier
testpmd> flow create 0 ingress pattern proto_id proto_id proto_id
proto_id [TOKEN]: match PPPoE session protocol identifier
The proto_id can not be set with previous implementation.
This patch is to fix this issue, and change the command line to:
testpmd> flow create 0 pattern pppoe_proto_id is xxxx
Fixes: 226c6e60c3 ("ethdev: add PPPoE to flow API")
Cc: stable@dpdk.org
Signed-off-by: Xiao Zhang <xiao.zhang@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
Introduce new command to dump memory statistics of each socket,
summary, also show changes since last call.
Usage:
dump_socket_mem
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds CLI option to enter the v_pt_rsv_flags value for GTP
flow pattern item.
It also adds GTP as valid item in raw_encap and raw_decap setting.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
rte_eth_dev_fw_version_get() was not called in test PMD.
Added rte_eth_dev_fw_version_get() in testpmd under
"show port info <port no>"
Bugzilla ID: 225
Reported-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Muhammad Ahmad <muhammad.ahmad@emumba.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This test case shall be used to measure the trace overhead.
Example command to run the performance test case.
echo "trace_perf_autotest" | ./build/app/test/dpdk-test -c 0x3 --trace=.*
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Example commands to run UT and check the traces with babeltrace viewer.
- Delete the existing /root/dpdk-traces/ directory if needed.
> sudo rm -rf /root/dpdk-traces/
- Start the dpdk-test
> sudo ./build/app/test/dpdk-test -c 0x3 - --trace=.*
- Run trace_autotest
> trace_autotest
- View the traces with babletrace viewer.
> sudo babeltrace /root/dpdk-traces/
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Add test cases for RCU defer queue APIs.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Remove PMD bitmask, which selects the PMD to be tested
for each test case. Instead, all PMDs are eligible
to run all tests, and capability checking discards
the PMDs which do not support each test case.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Before running any out-of-place test cases,
check if device supports this mode.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Before running any sessionless test cases,
check if device supports this mode.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Now that capabilities are checked to see if an algorithm
is supported by a device, there is no need to check
for a specific version of a library used in a PMD.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Check if test case is supported by the crypto device,
including algorithm and some of its parameter, such as key length,
IV length, etc, using the capabilities API.
If it is not supported, test case is skipped.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add configure function to configure the PF from within
the bbdev-test itself without external application
configuration the device.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
Reviewed-by: Niall Power <niall.power@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add in the "info_get" function to the driver, to allow us to query the
device.
No capability are available yet.
Linking bbdev-test to support the PMD with null capability.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
Acked-by: Niall Power <niall.power@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch adds new tests for verification of the "internal
QAT IM buffer too small" case handling. These unit tests aren't
specific to the QAT PMD only - they pass or skip on other PMDs like
ISAL and ZLIB (depending on particular PMD capabilities).
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
