Add Rx queue setup and release op for CN9K and CN10K
SoC. Release is completely common while setup is platform
dependent due to fast path Rx queue structure variation.
Fastpath is platform dependent partly due to core cacheline
size difference.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add device configuration op for CN9K and CN10K. Most of the
device configuration is common between two platforms except for
some supported offloads.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add various devargs parsing command line arguments
parsing functions supported by CN9K and CN10K.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add platform specific probe and remove callbacks for CN9K
and CN10K which use common probe and remove functions.
Register ethdev driver for CN9K and CN10K.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add build infrastructure and common probe and remove for cnxk driver
which is used by both CN10K and CN9K SoC.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add roc API to configure VLAN tag addition and removal.
This patch also adds 98xx support for increased MCAM
entries for rte flow.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Reviewed-by: Kiran Kumar K <kirankumark@marvell.com>
Send RED pass/drop levels based on rq configurations to kernel.
Fixed the aura and pool shift value calculation.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
As per the new LMTST design, userspace shall allocate LMT region,
setup the DMA translation and share the IOVA with kernel via MBOX.
Kernel will convert this IOVA to physical memory and update the
LMT table entry with the same.
With this new design also shared mode (i.e. all pci funcs sharing
the LMT region allocated by primary/base pci func) is intact.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add NPC support API to dump created flow entries.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
The instruction generation was not correct due to
fact that volatile suppose to use with ccode variable
as well.
Change the logic to use gcc atomic builtin to
simplify and avoid explicit volatile from the code.
Fixes: 81af267893 ("common/cnxk: support NPA batch alloc/free")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>
This patch will consider device argument to lock RSS table
in NIX.
This patch also adds few misc fixes such as disabling NIX Tx
vlan insertion conf in SMQ, enabling SSO in NIX Tx SQ
for Tx completions and TM related stats API.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Seen with address sanitizer.
rte_mempool_virt2iova() can only be used on mempool elements. In this case,
it is incorrect, and rte_mem_virt2iova() has to be used.
Bugzilla ID: 737
Fixes: 7b295dceea ("test/mbuf: add unit test cases")
Cc: stable@dpdk.org
Reported-by: Zhihong Peng <zhihongx.peng@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
This hack was needed with the make build system.
With meson, any private header from a library is visible as long as a
dependency to this library is expressed.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
For devices not bound to any Linux kernel module, we leak a pci object
since it is never added to the PCI bus device list.
Fixes: c79a1c6746 ("bus/pci: optimize bus scan")
Cc: stable@dpdk.org
Reported-by: Owen Hilyard <ohilyard@iol.unh.edu>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Some files were starting with some outdated introductions.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Add support for performing selftest.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Custom IRQ handlers may be registered/removed on demand.
Since registration and removal are related they are in the
same patch.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Allow user to retrieve baseband phy memory resources.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for retrieving maximum number of interrupts.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for interrupt initialization and cleanup. Internally
interrupt initialization performs low level setup that allows
custom interrupt handler registration later on.
Interrupt initialization and cleanup are related hence they
are in the same patch.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for dequeueing responses to previously
enqueued messages.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add preliminary support for enqueue operation.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for reading number of available queues from baseband
phy. Currently only single queue is supported.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for reading baseband phy queue configuration.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add baseband phy skeleton driver. Baseband phy is a hardware subsystem
accelerating 5G/LTE related tasks. Note this driver isn't involved into
any sort baseband protocol processing. Instead it just provides means
for configuring hardware.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for registering user supplied baseband PHY IRQ handler.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for clearing previously register baseband PHY IRQ handler.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for setting custom baseband PHY IRQ handler.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for removing existing IRQ stack.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for retrieving IRQ stack.
If stack does not exist then it gets created.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for checking whether given IRQ is available.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for initializing baseband PHY IRQs. While at it
also add support for reverting back to the default state.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for device init and fini. It merely saves
baseband phy state container in a globally accessible
resource chest.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for performing selftest operation.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for dequeueing responses to previously
enqueued messages.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for enqueueing messages.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for reading number of available queues i.e number
of available logical macs (LMACs).
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for reading queue configuration. Single queue represents
a logical MAC available on RPM/CGX.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add baseband PHY CGX/RPM skeleton driver which merely probes a matching
device. CGX/RPM are Ethernet MACs hardwired to baseband subsystem.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for starting or stopping specific lmac.
Start enables Rx/Tx traffic while stop does the opposite.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for setting link up or down.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for setting link mode.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for enabling or disablig PTP mode.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for enabling or disabling internal loopback.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for retrieving link information.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Messages can be exchanged between userspace software and firmware
via set of two dedicated registers, namely scratch1 and scratch0.
scratch1 acts as a command register i.e message is sent to firmware,
while scratch0 holds response to previously sent message.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
