Add RIB (Routing Information Base) library. This library
implements an IPv4 routing table optimized for control plane
operations. It implements a control plane struct containing routes
in a tree and provides fast add/del operations for routes.
Also it allows to perform fast subtree traversals
(i.e. retrieve existing subroutes for a given prefix).
This structure will be used as a control plane helper structure
for FIB implementation. Also it might be used standalone in other
different places such as bitmaps for example.
Internal implementation is level compressed binary trie.
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Building with clang 3.4.2 caused the following error:
CC dpaa2_sec_dpseci.o
In file included from /dpdk/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:40:
In file included from /dpdk/drivers/common/dpaax/caamflib/desc/ipsec.h:11:
In file included from /dpdk/drivers/common/dpaax/caamflib/rta.h:11:
In file included from .../common/dpaax/caamflib/rta/sec_run_time_asm.h:14:
/dpdk/drivers/common/dpaax/compat.h:108:18:
error: redefinition of typedef 'dma_addr_t' is a C11 feature
[-Werror,-Wtypedef-redefinition]
typedef uint64_t dma_addr_t;
^
/dpdk/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:37:18:
note: previous definition is here
typedef uint64_t dma_addr_t;
^
The dma_addr_t was defined in the common compat.h file, and does not
need to be redefined.
The meson build include directories list was updated to enable the
definition in the common compat.h file be used.
Fixes: 8c83f28cc8 ("common/dpaax: move OF library from DPAA bus")
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch disables the 1588 timer support by default on DPAA2
platform due to the performance impact.
By default it is disabled in config/common_base, so remove the entry
from DPAA2.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
1 issue caught by coverity (issue 344967).
Leaked_storage: Variable sep going out of scope leaks the
storage it points to.
When 'sep' is not null and sep_exist is 0, 'sep' is freed
before going out of scope of the function irrespective of
'addr' exists or not.
Coverity issue: 344967
Fixes: e67a61614d ("bus/fslmc: support device iteration")
Cc: stable@dpdk.org
Signed-off-by: Agalya Babu RadhaKrishnan <agalyax.babu.radhakrishnan@intel.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Documentation includes separate pages of EAL command-line options for
Linux and for FreeBSD.
Links to these pages use the same text 'EAL parameters', so it is not
clear which link to use for which environment.
This patch adds the text '(Linux)' and '(FreeBSD)' where relevant, to
clearly identify the links.
Fixes: 3ee567cfec ("doc: document all EAL parameters in one place")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
The rawdev xstats_reset function is now enabled. It is called when the
ioat autotest completes, to reset all xstat values after they have been
modified during testing.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
Some of the internal header files have 'rte_' prefix
and some don't.
Remove 'rte_' prefix from all internal header files.
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
When running the dpdk-telemetry-client.py with python 3, we get the
following syntax errors:
File "usertools/dpdk-telemetry-client.py", line 70
print "\nResponse: \n", str(data)
^
SyntaxError: invalid syntax
File "usertools/dpdk-telemetry-client.py", line 93
print "\nResponse: \n", str(data)
^
SyntaxError: invalid syntax
File "usertools/dpdk-telemetry-client.py", line 111
file_path = sys.argv[1]
^
TabError: inconsistent use of tabs and spaces in indentation
Import print_function from __future__ and add parentheses where missing.
Also, use spaces for indentation everywhere.
Fixes: d1b94da4a4 ("usertools: add client script for telemetry")
Fixes: 53f293c9a7 ("usertools: replace unsafe input function")
Fixes: 4080e46c80 ("telemetry: support global metrics")
Cc: stable@dpdk.org
Signed-off-by: Robin Jarry <robin.jarry@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Running dpdk-pmdinfo.py on Ubuntu 18.04 (bionic) with python 3 and
pyelftools installed produces no output but no error is reported
neither:
~$ python3 usertools/dpdk-pmdinfo.py -r build/app/testpmd
~$ echo $?
0
While with python 2, it works:
~# python2 usertools/dpdk-pmdinfo.py -r build/app/testpmd
{"pci_ids": [], "name": "dpio"}
{"pci_ids": [], "name": "dpbp"}
{"pci_ids": [], "name": "dpaa2_qdma"}
.....
On Ubuntu 18.04, pyelftools is version 0.24. The change log of
pyelftools v0.24 says:
- Symbol/section names are strings internally now, not bytestrings
(this may affect API usage in Python 3) (#76).
We cannot guess which version of pyelftools is actually being used. The
elftools.__version__ symbol is not consistent with each distro's package
version. For example, on Ubuntu 16.04 (xenial), the .deb package version
is '0.23-2' but elftools.__version__ contains '0.25'. This is certainly
due to partial backports.
To have a more consistent behaviour of this script across all versions
of python, add the unicode_literals future import so that literal
strings are now always "unicode".
Add 2 utility functions to force a string into bytes or bytes into an
unicode string.
Force pyelftools return values to unicode strings (will do nothing with
recent version of pyelftools).
If elffile.get_section_by_name returns None with a unicode section name,
try with the same one encoded as bytes.
Also, replace all open() calls by io.open() which behaves like the
builtin open in python 3. The only non-binary opened file is
/usr/share/hwdata/pci.ids which is UTF-8 encoded text. Explicitly
specify that encoding.
Link: https://github.com/eliben/pyelftools/blob/v0.24/CHANGES#L7
Link: https://github.com/eliben/pyelftools/commit/108eaea9e75a8b5a
Fixes: 54ca545dce ("make python scripts python2/3 compliant")
Cc: stable@dpdk.org
Signed-off-by: Robin Jarry <robin.jarry@6wind.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Send request to power manager for core id provided
by user to get related capabilities.
Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
Send capabilities for requested cores.
Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
Add new packet type and commands for capabilities query.
Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
Add command and related logic to query CPU frequencies
either for specified CPU or all cores.
Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
Add new command which gives possibility to enable/disable queries
form VM guest.
Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
On query received from VM guest send CPUs frequencies.
Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
Extend incoming packet reading API with new packet
type which carries CPU frequencies.
Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
channel_monitor.c was dependent on i40e driver being available.
This is only necessary for the TRAFFIC policy, so use #ifdef's
to not call these when i40e not available.
Fixes: f14791a812 ("examples/vm_power_mgr: add policy to channels")
Cc: stable@dpdk.org
Signed-off-by: David Hunt <david.hunt@intel.com>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Use new guest channel API to send confirmation
message for received power command.
Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
Extend vm_power_guest to check incoming confirmations
of messages previously sent to host.
Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
Added new experimental API rte_power_guest_channel_receive_msg
which gives possibility to receive messages send to guest.
Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
Currently 0 is being used for not connected slot indication.
This is not consistent with linux doc which identifies 0 as valid
(connected) slot, thus modification was done to change it.
Fixes: cd0d5547 ("power: vm communication channels in guest")
Cc: stable@dpdk.org
Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Interrupt will not be received when disabling RX interrupt without
synchronization mechanism sometimes which leads to wake up issue.
Add spinlock to fix it.
Fixes: b736d64787 ("examples/l3fwd-power: disable Rx interrupt when waking up")
Cc: stable@dpdk.org
Signed-off-by: Xiao Zhang <xiao.zhang@intel.com>
Reviewed-by: Marvin Liu <yong.liu@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
The cache-misses problem is very serious when the function
lpm_cb_parse_ptype is called to read the content of packets. That is
because the contents of packages previously stored in the cache are
overwritten by the following instructions or variables.
Thus the prefetch order can be used to prefetch the next packet into
the cache to avoid CPU spending too much time on it.
On Octeon TX platform with built-in NIC, 12% performance gain was
measured by running RFC2544 NDR test with l3fwd. Furthermore, the
cache-misses event of the function lpm_cb_parse_ptype was reduced by
20%, and the CPU task-clock of it dropped from 16.49% to 11.3%, based
on the forwarding test for one minute with the 64B packet.
On the dpaa2 platform, no performance improvement nor drop were seen
with this patch by running RFC2544 NDR test with l3fwd.
On the x86 platform, 15.7% performance gain was measured by running
RFC2544 NDR test with l3fwd.
Signed-off-by: Feifei Wang <feifei.wang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
The ether header does not need to be packed since that makes no sense for
structures with only bytes in them, but it should be aligned to a two-byte
boundary to simplify access to it from code. Other packed structures that
use this also need to be updated to take account of the change, either by
removing packing - where it is clearly unneeded - or by explicitly giving
those structures 2-byte alignment also.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Added guide for IOAT sample app usage and code description.
Signed-off-by: Marcin Baran <marcinx.baran@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Added printing stats of ports each second. The stats printing is done
using master core. The information provided informs about packets
received, dropped and send as well as statistics of rawdev devices.
Signed-off-by: Marcin Baran <marcinx.baran@intel.com>
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Added possibility to use two lcores: first for packet receiving and
copying, second for packets sending.
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Signed-off-by: Marcin Baran <marcinx.baran@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Added support for copying packets using rawdev device. Each port's Rx queue
is assigned DMA channel for copy.
Signed-off-by: Marcin Baran <marcinx.baran@intel.com>
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Added support for copying packets using software copy mode and MAC address
changing. The copies are processed using one lcore.
Signed-off-by: Marcin Baran <marcinx.baran@intel.com>
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
A new sample app demonstrating use of driver for CBDMA. The app receives
packets, performs software or hardware copy, changes packets' MAC addresses
(if enabled) and forwards them. The change covers ports initialization,
closing connection and argument parsing.
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Signed-off-by: Marcin Baran <marcinx.baran@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Building the example with clang gives the error:
error: expression which evaluates to zero treated as a null pointer
constant of type 'const char *' [-Werror,-Wnon-literal-null-conversion]
lcore_id, UINT8);
^~~~~
This error is due to the wrong data type being given for the
cmd_set_cpu_freq_core_num value - it was specified as string rather than
numeric type.
Fixes: f5e5c3347a ("examples/vm_power: cli in guest")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
When adding to the build, add in two missing includes that prevented build
on freebsd, rather than just duplicating the makefile restriction.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Limited to x86_64 systems, as it fails to compile on any others and is
disabled in the examples makefile for non-x86_64 systems.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The warnings about functions not returning values can be removed from the
code by just adding an attribute to the function to specifies it doesn't
return. The GCC bug referenced in the makefile which prevents this from
working has been fixed for >10 years according to bugzilla.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Since the code for the ethtool example was contained in subdirectories the
compilation of this example is different from most of the other apps, and
it had not been abled when the user requests a build with "-Dexamples=all".
To simplify the build with meson, the separate ethtool library is not build
separately, rather the app is built as a single entity.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The examples/bpf directory does not contain an example app, but rather
example code for use with testpmd's BPF support. Therefore, we should not
attempt to build it when the user requests "examples=all". This also
synchronises the meson behaviour with make which similarly doesn't compile
up the code.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The meson build was missing the define to enable pcap port support if
libpcap (development) package was found on the build platform. Rather than
duplicating the checks for libpcap found in the pcap net PMD build file, we
can move the checks to the top-level config directory and reference the
RTE_PCAP_PORT setting elsewhere in the build.
Bugzilla ID: 351
Fixes: 5b9656b157 ("lib: build with meson")
Cc: stable@dpdk.org
Reported-by: Cristian Bidea <cristian.bidea@keysight.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Cristian Bidea <cristian.bidea@keysight.com>
Use RTE_DIM instead of re-defining ARRAY_SIZE.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
When running the ioat_rawdev_autotest, the ring size was initially required
to be 0. This prevented the test being run multiple times, as the ring size
is modified to a non-zero value when running the first test.
A global variable is now used to track the expected ring size, and is used
in the initial value check. This enables the test to be run more than
once.
Fixes: 849470d522 ("raw/ioat: add configure, start and stop functions")
Cc: stable@dpdk.org
Reported-by: Yinan Wang <yinan.wang@intel.com>
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The ioat rawdev was initially started during the test, however was never
stopped. This would cause issues when running the test again, as the device
cannot be configured when in a running state.
The device is now stopped after the test has completed, or if the test is
terminated due to error.
Fixes: 849470d522 ("raw/ioat: add configure, start and stop functions")
Cc: stable@dpdk.org
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch adds return value checking and error handling for
rte_rawdev_en/dequeue_buffers() and rte_eth_link_get().
Coverity issue: 350247, 350250, 350251, 350252, 350253, 350254
Fixes: 5194299d6e ("examples/ntb: support more functions")
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Any file with ABI versioned functions needs different macros for shared and
static builds, so we need to accommodate that. Rather than building
everything twice, we just flag to the build system which libraries need
that handling, by setting use_function_versioning in the meson.build files.
To ensure we don't get silent errors at build time due to this meson flag
being missed, we add an explicit error to the function versioning header
file if a known C macro is not defined. Since "make" builds always only
build one of shared or static libraries, this define can be always set, and
so is added to the global CFLAGS. For meson, the build flag - and therefore
the C define - is set for the three libraries that need the function
versioning: "distributor", "lpm" and "timer".
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Tested-by: Andrzej Ostruszka <amo@semihalf.com>
Reviewed-by: Andrzej Ostruszka <amo@semihalf.com>
