The hardware may have limitations on maximal amount of
supported Tx descriptors building blocks (WQEBB). Application
requires the Tx queue must accept the specified amount of packets.
If inline data feature is engaged the packet may require more WQEBBs
and overall amount of blocks may exceed the hardware capabilities.
Application has to make a trade-off between Tx queue size and maximal
data inline size.
In case if the inline settings are not requested explicitly with
devarg keys the default values are used. This patch adjusts the
applied default values if large Tx queue size is requested and
default inline settings can not be satisfied due to hardware
limitations.
The explicitly requested inline setting may be aligned (enlarging
only) by configurations routines to provide better WQEBB filling,
this implicit alignment is the subject for adjustment either.
The warning message is emitted to the log if adjustment happens.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
When rules are being inserted from multiple cores, there are several
race conditions during rte_flow operations.
For example, when inserting rules from 2 cores simultaneously, both
the cores try to fetch a free available filter entry and they both
end up fetching the same entry. Both of them start overwriting the
same filter entry before sending to firmware, which results in wrong
rule being inserted to hardware.
Fix the races by adding spinlock to serialize the rte_flow operations.
Fixes: ee61f5113b17 ("net/cxgbe: parse and validate flows")
Fixes: 9eb2c9a48072 ("net/cxgbe: implement flow create operation")
Fixes: da23bc9d33f4 ("net/cxgbe: implement flow destroy operation")
Fixes: 8d3c12e19368 ("net/cxgbe: implement flow query operation")
Fixes: 86910379d335 ("net/cxgbe: implement flow flush operation")
Cc: stable@dpdk.org
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Scattered receive is supported but not included in receive offload
capabilities. Fix by adding it and including in scattered receive
calculation.
Fixes: 9c1507d96ab8 ("net/bnxt: switch to the new offload API")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Use first receive queue assigned to VNIC as the default receive queue
when configuring Thor VNICs. This is necessary e.g. in order for flow
redirection to a specific receive queue to work correctly.
Fixes: f8168ca0e690 ("net/bnxt: support thor controller")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The required number of statistics contexts is computed as the sum
of the number of receive and transmit rings plus one for the async
completion ring. A statistics context is not actually required for
the async completion ring, so remove it from the calculation.
Fixes: bd0a14c99f65 ("net/bnxt: use dedicated CPR for async events")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Thor queue scaling is currently limited by the number of NQs that
can be allocated. Fix by using a common NQ for all receive/transmit
rings instead of allocating a separate NQ for each ring.
Fixes: f8168ca0e690 ("net/bnxt: support thor controller")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Class of Service (CoS) is a way to manage multiple types of
traffic over a network to offer different types of services
to applications. CoS classification (priority to cosqueue) is
determined by the user and configured through the PF driver.
DPDK driver queries this configuration and maps the cos queue
ids to different VNICs. This patch adds this support.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support for LRO for adapters based on Thor (BCM57508).
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
When using transmit/receive queue sizes smaller than 256, alignment
requirements are not being met for Thor-based adapters. Fix by
forcing memory addresses used for transmit/receive/aggregation ring
allocations to be on 4K boundaries.
Fixes: f8168ca0e690 ("net/bnxt: support thor controller")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Driver uses the Firmware mailbox to read statistics and configure
some features.
This patch introduces a mutex to provide consistent access to the
FW mailbox to prevent potential data corruption.
Fixes: 86d36773bd42 ("net/atlantic: implement firmware operations")
Cc: stable@dpdk.org
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Driver reports current flow control mode based on internal flow control
settings. Currently this logic works incorrectly.
Fixes: 921eb6b8ce31 ("net/atlantic: fix flow control by sync settings on Rx")
Cc: stable@dpdk.org
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Currently, driver always return full set of xstats counters, including
MACSEC counters. But this driver also supports AQC100 chips, which
does not have MACSEC feature.
This fix adds checking for MACSEC availability (based on FW capability
bits) and returns xstats without MACSEC counters if MACSEC feature
is not available.
Fixes: 09d4dfa85359 ("net/atlantic: implement MACsec statistics")
Cc: stable@dpdk.org
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
When computing the head of CQE ring of prefetch, use qmask to point to
the correct head index on wrap around case.
Fixes: cc4d7693f2d9 ("net/octeontx2: support Rx")
Cc: stable@dpdk.org
Signed-off-by: Kommula Shiva Shankar <kshankar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Use latest firmware 7.13.11.
7.13.11 FW changelog:
- Packets from a VF with pvid configured which were sent with a
different vlan were transmitted instead of being discarded.
- In some multi-function configurations, inter-PF and inter-VF
Tx switching is incorrectly enabled.
- Wrong assert code in FLR final cleanup in case it is sent not
after FLR.
- Chip may stall in very rare cases under heavy traffic with FW GRO
enabled.
- VF malicious notification error fixes.
- Default gre tunnel to IPGRE which allows proper RSS for IPGRE
packets, L2GRE traffic will reach single queue.
- Removes unnecessary internal mem config, latest FW performs this
autonomously.
Update the PMD version to 1.1.0.1.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Update hardware software common base driver code in preparation to
update the firmware to version 7.13.11.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Update and reorganize HW registers in preparation to update the firmware
to version 7.13.11.
Move HW_INTERRUT_ASSERT_SET_0 out from ecore_reg.h to bnx2x.h.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Caught by clang, this idx value is only used for a debug message when
the mbufs allocation fails.
No need to use idx as a temporary storage.
Fixes: 8f2312474529 ("net/qede: fix performance bottleneck in Rx path")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Add support to below TCP segmentation offloads for
96XX A1 onwards and 95xx B0 onwards.
- TCPv4, TCPv6
- VXLAN[v4 | v6][v4 | v6]
- GENEVE[v4 | v6][v4 | v6]
This patch also modifies a fastpath function to be forced
inline due to performance reasons for multi-seg mode.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Adding change to sync RTE Flow with KPU profile to extract
NVGRE as ltype.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adding support for tx descriptor status dev ops for octeontx2.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Update LB ltypes and use the updated ones so as replace
LB_STAG and LB_QINQ by single LB_STAG_QINQ ltype.
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Allow VFs to enable backpressure for performance reasons.
The backpressure control is with kernel AF driver that will enable
backpressure even if one PF/VF requests it and disable it only
after all the PFs/VFs request for disable.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
NPC errors were incorrectly translated to ol_flag as
error code enum was not in sync with NPC profile.
Fixes: 371d3212cbed ("common/octeontx2: add build infrastructure and HW definition")
Cc: stable@dpdk.org
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
This structure has been missed during the big rework.
Fixes: 5ef254676752 ("net: add rte prefix to ESP structure")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
We are not freeing all the flows when a flow_flush is called.
Iterate through all the flows belonging to all the VNICs in use and
free the filters.
Fixes: 4ace85a7da25 ("net/bnxt: allocate rings and groups")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Fixed multicast filter programming and allmulti programming.
Fixed to skip programming multicast macs if the user requests
allmulti mode.
Also removed a comment in bnxt_hwrm_cfa_l2_set_rx_mask() which is
no longer valid now.
Fixes: d69851df12b2 ("net/bnxt: support multicast filter and set MAC addr")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Currently, when hw-vlan-filter is enabled on testpmd, driver is
receiving all vlan packets. Instead, it should only receive untagged
packets and vlan packets for which the VLAN filter is programmed.
This is because, the default rule to match on MAC is not getting
deleted, when hw-vlan-filter is ON.
This patch fixes the problem, by deleting the default MAC rule and
programming a new rule to receive only untagged packets, when
hw-vlan-filter is enabled & another rule for each vlan, as and when
that vlan is configured on that port.
Fixes: 246c5cc5f05e ("net/bnxt: use correct flags during VLAN configuration")
Cc: stable@dpdk.org
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
When a drop action for L2 filters is specified, support it.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Currently, there are four flow related functions, namely
bnxt_flow_create, bnxt_flow_destroy, bnxt_flow_validate,
bnxt_flow_flush. All these functions are not multi-thread safe.
This patch fixes it by synchronizing these functions with a lock.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
If flow creation fails because of an HWRM command failure or
or some other reason, reset the vnic and rxq info set earlier.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
In bnxt_rss_hash_update_op, driver is proceeding with
bnxt_hwrm_vnic_rss_cfg even though RSS hashkey length is invalid.
This patch fixes the problem by returning -EINVAL when RSS hashkey
length is invalid.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
If driver init/probe fails as part of cleanup/rollback, we may end
up invoking this HWRM cmd even on an invalid vNIC which will
unnecessarily log an error message as the cmd will fail.
Check for invalid ID before issuing the HWRM cmd
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Check device is started before flow creation.
Since the vnic data structures aren't created until device start,
the driver dereferences NULL vnic if flow creation is attempted before
device is started,
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Initialize all rings to INVALID_HW_RING_ID.
This can be used to determine the rings to free if allocation fails.
Signed-off-by: Rahul Gupta <rahul.gupta@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Check if the application is trying to create filters using
broadcast and multicast MAC address and reject it.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Driver was incorrectly programming the MAC with the already
configured one instead of the newly requested MAC by user.
Also, fix to restore the old mac address back to the default
vnic filter if the mac update operation fails.
Fixes: 68f589f2c728 ("net/bnxt: fix setting primary MAC address")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
When an application issues flow validate, we free the temporary
filter that is created. But the vnic is not freed up. This can
potentially interfere with subsequent flow creation. So free the vnic.
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Once the last filter associated with a VNIC is deleted when using
RSS action or the Queue action free the VNIC. Also free the RSS
context if the VNIC is using it.
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Parse priority attribute during flow creation.
This information will be used to give a hint to the FW to
place the flow rule accordingly in the CFA tables.
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support for RSS action during flow creation.
group id should not be 0 when RSS action is specified. Driver will
return an error for such a flow.
If a group id is used to create a filter with “n” RSS queues, it cannot
be used to create a filter with a different number of RSS queues till
all the flows using that combination are deleted.
While creating a flow if a group id groups a certain Rx queue ids for
RSS, the same group id shall not create a flow with a different group of
Rx queue ids till all the flows belonging to the group ids are deleted.
While creating a flow if a group id groups a certain Rx queue ids for
RSS, the same queue ids shall not be used with a different group id till
all flows created with that group id are deleted.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
We are currently creating only outer DMAC filters.
Create SMAC and inner DMAC filters using HWRM_CFA_L2_FILTER_ALLOC.
For this the HWRM_CFA_L2_FILTER_ALLOC has already been updated.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Currently flow creation is allowed with queue action only
when RSS is disabled. Remove this restriction. Flows can be
created when RSS is enabled.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
If the FW returns an error for an HWRM request, it does not necessarily
return standard error codes.
Convert these HWRM errors to standard errno.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The library libsze2 provides a pkg-config file: libsze2.pc.
Looking for this .pc file - with dependency() - is preferred
than looking for the library - with cc.find_library().
If the library is not installed in a standard path,
it can be found thanks to PKG_CONFIG_PATH variable.
The previous solution required to use CFLAGS and LDFLAGS
environment variables.
Fixes: 508cfe6be9f1 ("net/szedata2: add to meson build")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Jan Remes <remes@netcope.com>
The library libnfb is part of netcope-common which provides
a pkg-config file: netcope-common.pc.
Looking for this .pc file - with dependency() - is preferred
than looking for the library - with cc.find_library().
If the library is not installed in a standard path,
it can be found thanks to PKG_CONFIG_PATH variable.
The previous solution required to use CFLAGS and LDFLAGS
environment variables.
Fixes: 6435f9a0ac22 ("net/nfb: add new netcope driver")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Jan Remes <remes@netcope.com>
qede has been dropped from the drivers/net meson.
Add it again.
Fixes: 9a8864c8b5da ("net/octeontx2: add build and doc infrastructure")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
