Add ethdev link interrupt handler, MAC setup link
and check link status and get capabilities.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add hardware init function and reset operation in mac layer.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Adding bare minimum PMD library and doc build infrastructure
and claim the maintainership for txgbe PMD.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When a flow API RSS rule is issued in testpmd, device RSS key is changed
unexpectedly, device RSS key is changed to the testpmd default RSS key.
Consider the following usage with testpmd:
1. first, startup testpmd:
testpmd> show port 0 rss-hash key
RSS functions: all ipv4-frag ipv4-other ipv6-frag ipv6-other ip
RSS key: 6D5A56DA255B0EC24167253D43A38FB0D0CA2BCBAE7B30B477CB2DA38030F
20C6A42B73BBEAC01FA
2. create a rss rule
testpmd> flow create 0 ingress pattern eth / ipv4 / udp / end \
actions rss types ipv4-udp end queues end / end
3. show rss-hash key
testpmd> show port 0 rss-hash key
RSS functions: all ipv4-udp udp
RSS key: 74657374706D6427732064656661756C74205253532068617368206B65792
C206F76657272696465
This is because testpmd always sends a key with the RSS rule,
if user provides a key as part of the rule that key is used, if user
doesn't provide a key, testpmd default key is sent to the PMDs, which is
causing device programmed RSS key to be changed.
There was a previous attempt to fix the same issue [1], but it has been
reverted back [2] because of the crash when 'key_len' is provided
without 'key'.
This patch follows the same approach with the initial fix [1] but also
addresses the crash.
After change, testpmd RSS key is 'NULL' by default, if user provides a
key as part of rule it is used, if not no key is sent to the PMDs at all
[1]
Commit a4391f8bae85 ("app/testpmd: set default RSS key as null")
[2]
Commit f3698c3d09a6 ("app/testpmd: revert setting default RSS")
Fixes: d0ad8648b1c5 ("app/testpmd: fix RSS flow action configuration")
Cc: stable@dpdk.org
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
When sending data, netvsc assumes the tx_rndis buffer is contiguous and
calculates physical addresses based on this assumption.
Use memzone to allocate tx_rndis so it's guaranteed that this buffer is
physically contiguous.
Cc: stable@dpdk.org
Signed-off-by: Long Li <longli@microsoft.com>
In mrvl_create() allocated memory for 'mtr', we don't free it
when profile get fails and it will lead to memory leak.
We can get profile at the beginning of the function to
fix it, before calling mtr = rte_zmalloc_socket().
Fixes: cdb53f8da628 ("net/mvpp2: support metering")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Liron Himi <lironh@marvell.com>
This assert macro is not called anymore.
This also fixes an invalid reference to RTE_LOGTYPE_ERR that does not
exist.
Fixes: 3adcba9a8987 ("net/ena: update HAL to the newer version")
Fixes: 6f1c9df9e9cc ("net/ena: use dynamic log type for debug logging")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
This patch is to implement vhost DMA operation callbacks for CBDMA
PMD and add vhost async data-path in vhost sample. With providing
callback implementation for CBDMA, vswitch can leverage IOAT to
accelerate vhost async data-path.
Signed-off-by: Cheng Jiang <cheng1.jiang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch is to add async vhost driver arguments parsing function
for CBDMA channel, DMA initiation function and args description.
The meson build file is changed to fix dependency problem. With
these arguments vhost device can be set to use CBDMA or CPU for
enqueue operation and bind vhost device with specific CBDMA channel
to accelerate data copy.
Signed-off-by: Cheng Jiang <cheng1.jiang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
By design, async enqueue API should return directly if async device
is not registered. This patch removes the corrupted implementation of
the enqueue fallback from async mode to sync mode.
Fixes: cd6760da1076 ("vhost: introduce async enqueue for split ring")
Cc: stable@dpdk.org
Signed-off-by: Patrick Fu <patrick.fu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch checks whether the virtqueue metadata pointer
is valid before dereferencing it. It is not considered
a fix as earlier patch ensures there are no holes in the
array of virtqueue metadata pointers.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
This patch validates the queue index parameter, in order
to ensure no out-of-bound accesses happen.
Fixes: 9eed6bfd2efb ("vhost: allow to enable or disable features")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
This patch validates the queue index parameter, in order
to ensure neither out-of-bound accesses nor NULL pointer
dereferencing happen.
Fixes: 4d891f77ddfa ("vhost: add APIs to get inflight ring")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
This patch validates the queue index parameter, in order
to ensure no out-of-bound accesses happen.
Fixes: bd2e0c3fe5ac ("vhost: add APIs for live migration")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
This patch validates the queue index parameter, in order
to ensure neither out-of-bound accesses nor NULL pointer
dereferencing happen.
Fixes: 9eed6bfd2efb ("vhost: allow to enable or disable features")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
This patch validates the queue index parameter, in order
to ensure neither out-of-bound accesses nor NULL pointer
dereferencing happen.
Fixes: a67f286a6596 ("vhost: export queue free entries")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
The Vhost-user backend implementation assumes there will be
no holes in the device's array of virtqueues metadata
pointers.
It can happen though, and would cause segmentation faults,
memory leaks or undefined behaviour.
This patch keep the assumption that there is no holes in this
array, and allocate all uninitialized virtqueues metadata up
to requested index.
Fixes: 160cbc815b41 ("vhost: remove a hack on queue allocation")
Cc: stable@dpdk.org
Suggested-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
The PMD API allows stats and xstats values to be cleared separately.
This is a problem for the vhost PMD since some of the xstats values are
derived from existing stats values. For example:
testpmd> show port xstats all
...
tx_unicast_packets: 17562959
...
testpmd> clear port stats all
...
show port xstats all
...
tx_unicast_packets: 18446744073709551615
...
Modify the driver so that stats and xstats values are stored, updated,
and cleared separately.
Fixes: 4d6cf2ac93dc ("net/vhost: add extended statistics")
Cc: stable@dpdk.org
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The limitation of burst size in vector rx was removed, since it should
retrieve as much received packets as possible. And also the scattered
receive path should use a wrapper function to achieve the goal of
burst maximizing.
Bugzilla ID: 516
Fixes: 319c421f3890 ("net/avf: enable SSE Rx Tx")
Fixes: 1162f5a0ef31 ("net/iavf: support flexible Rx descriptor in SSE path")
Fixes: 5b6e8859081d ("net/iavf: support flexible Rx descriptor in AVX path")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Tested-by: Wei Ling <weix.ling@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The scattered receive path should use a wrapper function to achieve the
goal of burst maximizing.
Bugzilla ID: 516
Fixes: fe65e1e1ce61 ("fm10k: add vector scatter Rx")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The limitation of burst size in vector rx was removed, since it should
retrieve as much received packets as possible. And also the scattered
receive path should use a wrapper function to achieve the goal of
burst maximizing.
Bugzilla ID: 516
Fixes: c68a52b8b38c ("net/ice: support vector SSE in Rx")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Tested-by: Yingya Han <yingyax.han@intel.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The limitation of burst size in vector rx was removed, since it should
retrieve as much received packets as possible. And also the scattered
receive path should use a wrapper function to achieve the goal of
burst maximizing.
Bugzilla ID: 516
Fixes: 5b463eda8d26 ("net/i40e: make vector driver filenames consistent")
Fixes: ae0eb310f253 ("net/i40e: implement vector PMD for ARM")
Fixes: c3def6a8724c ("net/i40e: implement vector PMD for altivec")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The limitation of burst size in vector rx was removed, since it should
retrieve as much received packets as possible. And also the scattered
receive path should use a wrapper function to achieve the goal of
burst maximizing.
Bugzilla ID: 516
Fixes: b20971b6cca0 ("net/ixgbe: implement vector driver for ARM")
Fixes: 0e51f9dc4860 ("net/ixgbe: rename x86 vector driver file")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Tested-by: Feifei Wang <feifei.wang2@arm.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Issue reported by customer that only full mask was allowed on inner and
outer VLAN tag, thus not allowing mask to set VLAN ID filter only.
Removed check that enforces inner vlan and outer vlan equal
I40E_TCI_MASK (full mask 0xffff).
Fixes: d37705068ee8 ("net/i40e: parse QinQ pattern")
Cc: stable@dpdk.org
Signed-off-by: Padraig Connolly <padraig.j.connolly@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Optimize Tx path by using AVX512 instructions and vectorize the
tx free bufs process.
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Support RSS hash parsing in AVX512 data path as the default
RXDID is set to #22, that means the RSS hash field locates
in the 2nd 16B of each Flex Rx descriptor.
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add AVX512 support for ice PMD. This patch adds ice_rxtx_vec_avx512.c
to support ice AVX512 vPMD.
This patch aims to enable AVX512 on ice vPMD. Main changes are focus
on Rx path compared with AVX2 vPMD.
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Remove the usage of rte_panic() within ixgbe_pf_host_init()
Signed-off-by: Conor Walsh <conor.walsh@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
The return value of rte_eth_switch_domain_alloc() was not being checked
within ixgbe_pf_host_init() which caused a coverity issue. If the call
fails a warning is logged using PMD_INIT_LOG() and *vfinfo is free'd.
ixgbe_pf_host_init() now has a return value which is checked in
eth_ixgbe_dev_init()
Coverity issue: 362795
Fixes: cf80ba6e2038 ("net/ixgbe: add support for representor ports")
Cc: stable@dpdk.org
Signed-off-by: Conor Walsh <conor.walsh@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Fix a potential resource leak in case of errors during dev args
parsing during device probe.
Fixes: 6dc83230b43b ("net/bnxt: support port representor data path")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
i40evf_execute_vf_cmd() uses _atomic_set_cmd() to execute virtual
channel commands safely in multi-process mode and multi-thread mode.
However, it returns error when one process or thread is pending. Add
rte_spinlock_trylock() to handle this issue in concurrent scenarios.
Fixes: 4861cde46116 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Yuying Zhang <yuying.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The current virtchnl structure for enable/disable queues only supports
max 32 queue pairs. Use a new opcode and structure to indicate up to 256
queue pairs, in order to enable/disable queues in large VF case.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The current IRQ mapping configuration only supports max 16 queues and
16 MSIX vectors. Change the queue vector mapping structure to indicate
up to 256 queues. A new opcode is used to handle the case with large
number of queues. To avoid adminq buffer size limitation, we support
to send the virtchnl message multiple times if needed.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Since the adminq buffer size has a 4K limitation, the current virtchnl
command VIRTCHNL_OP_CONFIG_VSI_QUEUES cannot send the message only once
to configure up to 256 queues. In this patch, we send the messages
multiple times to make sure that the buffer size is less than 4K each
time.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Negotiate large VF capability with PF during VF initialization. If large
VF is supported and the number of queues larger than 16 is required, VF
requests additional queues from PF. Mark the state that large VF is
supported.
If the allocated queues number is larger than 16, the max RSS queue
region cannot be 16 anymore. Add the function to query max RSS queue
region from PF, use it in the RSS initialization and future filters
configuration.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add a new virtchnl function to request additional queues from PF.
Current default queue pairs number when creating a VF is 16. In order to
support up to 256 queue pairs per VF, enable this request queues
function.
When requesting queues succeeds, PF will return an event message. If it
is handled by interrupt first, the request queues command cannot receive
the correct PF response and will wait until timeout. Therefore, disable
interrupt before requesting queues in order to handle the event message
asynchronously.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Currently, VF can only handle virtchnl event message by calling
interrupt.
It is not available in two cases:
1. If the event message comes during VF initialization before interrupt
is enabled, this message will not be handled correctly.
2. Some virtchnl commands need to receive the event message and handle
it with interrupt disabled.
To solve this issue, we add the virtchnl event message handling in the
process of reading vitchnl messages in adminq from PF.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
