Reduce host CPU overhead of Tx packet processing:
* Use local variables inside per-packet loop instead of fields in structs.
* Factor book keeping and conditionals out of the per-packet loop where
possible.
* Post buffers to the nic at a maximum of every 64 packets
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Mbufs were returned to the pool one at a time. Use rte_mempool_put_bulk
instead. There were multiple function calls for each buffer returned.
Refactor this code into just 2 functions.
Signed-off-by: John Daley <johndale@cisco.com>
The NIC can either DMA a separate completion message for each completed
send or periodically just DMA the index of the last completed send.
Switch to the latter method which improves cache locality and performance.
Signed-off-by: John Daley <johndale@cisco.com>
The list of mbufs held by the driver on Tx was allocated in chunks
(a hold-over from the enic kernel mode driver). The structure used
next pointers across chunks which led to cache misses.
Allocate the array used to hold mbufs in flight on Tx with
rte_zmalloc_socket(). Remove unnecessary fields from the structure
and use head and tail pointers instead of next pointers.
Signed-off-by: John Daley <johndale@cisco.com>
Functions existed which were never called. Removed them. Also
rename the 'pmd' from the name of the Tx function to improve clarity.
Signed-off-by: John Daley <johndale@cisco.com>
The Tx functions were in enic_ethdev.c and enic_main.c - files in which
they did not logically belong. To make things consistent with most
other drivers, we therefore extract them and place them with the equivalent
Rx functions into a file called enic_rxtx.c.
Signed-off-by: John Daley <johndale@cisco.com>
Truncated packets occur on enic if an mbuf is not big enough to
receive it or there aren't enough mbufs if rx scatter is in use.
They show up as error packets but unlike other error packets (like
packets bad FCS) there are no nic drop counts incremented for them.
Truncated packets are calculated by subtracting hardware errors from
software errors. Note: this causes transient inaccuracies in the
ipackets count. Also, the length of truncated packets are counted
in ibytes even though truncated packets are dropped which can make
ibytes be slightly higher than it should be.
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Following the discussions from:
http://dpdk.org/ml/archives/dev/2015-July/021721.htmlhttp://dpdk.org/ml/archives/dev/2016-April/038143.html
Remove the unused flag from enic driver. Also, the enic driver is
now modified to drop bad packets instead of using a non-existent
flag to try and identify them as bad.
Fixes: 947d860c82 ("enic: improve Rx performance")
Fixes: 5776c30293 ("enic: fix error packets handling")
Fixes: 50765c820e ("enic: remove packet error conditional")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: John Daley <johndale@cisco.com>
rx_no_bufs is a hardware counter of packets dropped on the
interface due to no host buffers and should be used to update
r_stats->imissed counter instead of rx_nombuf.
Include rx_drop in ierrors. rx_drop is incremented if packets
arrive when the receive queue is disabled.
Add a structure and functions for initializing and clearing
software counters. Add count of Rx mbuf allocation failures
(rx_nombuf) as the first counter.
Fixes: fefed3d1e6 ("enic: new driver")
Signed-off-by: John Daley <johndale@cisco.com>
GCC_VERSION is empty in case of clang:
/bin/sh: line 0: test: -ge: unary operator expected
It is the same issue as http://dpdk.org/dev/patchwork/patch/5994/
Fixes: 366113dbfb ("e1000: suppress misleading indentation warning")
Signed-off-by: Hiroyuki Mikita <h.mikita89@gmail.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Rich Lane <rich.lane@bigswitch.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: John W. Linville <linville@tuxdriver.com>
Suspicious implicit sign extension: pf->fdir.match_counter_index
with type unsigned short (16 bits, unsigned) is promoted in
"pf->fdir.match_counter_index << 20" to type int (32 bits, signed),
then sign-extended to type unsigned long (64 bits, unsigned).
If "pf->fdir.match_counter_index << 20" is greater than 0x7FFFFFFF,
the upper bits of the result will all be 1.
To fix the issue explicitly cast pf->fdir.match_counter_index to uint32_t.
Coverity issue: 13315
Fixes: 05999aab4c ("i40e: add or delete flow director")
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch enables configuring MTU for i40e.
Since changing MTU needs to reconfigure queue, the port must be
stopped before configuring MTU.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
When setting up the flexible paylaod selection rules, the value
NONUSE_FLX_PIT_DEST_OFF (== 63) is meant to disable the rule.
However, since the MK_FLX_PIT macro always added on an additional
offset of I40E_FLX_OFFSET_IN_FIELD_VECTOR (== 50) to the value passed
the functionality to disable the rule was broken.
This patch fixes this by checking for the disable value and not adding
the offset in that case.
Fixes: d8b90c4eab ("i40e: take flow director flexible payload configuration")
Reported-by: Michael Habibi <mikehabibi@gmail.com>
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Zhe Tao <zhe.tao@intel.com>
Previously, there was a known issue "On Intel® 40G Ethernet
Controller stopping the port does not really down the port link."
There were two reasons why the port was always kept up.
1. Old firmware versions had issues when "Set PHY config command"
was used on 40G NICs.
2. The kernel i40e driver didn't call "Set PHY config command" when
ifconfig up/down was used, it assumes the link is always up. But
in DPDK, ports are forced down when an applications quits. So if
the port is then switched to being controlled by kernel the driver,
the port can not be brought up through "ifconfig <ethx> up".
This patch fixes this issue by adding in "Set PHY config command"
into our driver. This is now possible because with newer firmware
there is no longer a problem using this command.
With this fix, after DPDK quit, if the port is switched to being used
by the kernel driver, "ethtool -s <ethx> autoneg on" can be used to
turn on the auto negotiation, and then port can be brought up through
"ifconfig <ethx> up".
NOTE: requires kernel i40e driver version >= 1.4.X
Fixes: 2f1e228174 ("i40e: skip link control as firmware workaround")
Fixes: 16c979f9ad ("i40e: disable setting of PHY configuration")
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Change the Tx routine to ring the doorbell once per burst
and not on every Tx packet. This driver-level optimization
is necessary to achieve line rates for larger frame
sizes (1k or more).
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
- Process Tx completions based on configured Tx free threshold and
determine how much TX BDs are required before invoking bnx2x_tx_encap()
- Change bnx2x_tx_encap() to void function as it can now never fail
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Under certain scenarios, management firmware (MFW) periodically polls
the driver for LAN statistics. This patch implements the osal hook to
fill in the stats.
Fixes: ec94dbc573 ("qede: add base driver")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Program the PCIe completion timeout to 4 sec to give enough time
to allow completions to be received successfully in some older systems.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
PCIOCREAD and PCIOCWRITE ioctls to read/write PCI config space fail
with EPERM due to missing write permission. Fix by opening /dev/pci/
with O_RDWR instead.
Fixes: 632b2d1dee ("eal: provide functions to access PCI config")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
To be consistent with the naming for ARM NEON implementation,
ixgbe_rxtx_vec.c is renamed to ixgbe_rxtx_vec_sse.c.
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Previously, if an adminq message is sent successfully, but no response is
received, function "i40evf_execute_vf_cmd" will return without error.
The root cause is value "err" is overwritten. This patch fixes this by
ensuring the value of err is set appropriately for each cmd.
Fixes: ae19955e7c ("i40evf: support reporting PF reset")
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Use ARM NEON intrinsic to implement ixgbe vPMD
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
[style fixes as highlighted by checkpatch.pl]
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
move scalar code which does not use x86 intrinsic functions to new file
"ixgbe_rxtx_vec_common.h", while keeping x86 code in ixgbe_rxtx_vec.c.
This allows the scalar code to to be shared among vector drivers for
different platforms.
Suggested-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The VLAN tag information should be stored in the first mbuf of a chain
of buffers, not in the last one.
Fixes: 9fd5e98b62 ("vmxnet3: support RSS and refactor Rx offload")
Signed-off-by: John Guzik <john@shieldxnetworks.com>
Acked-by: Yong Wang <yongwang@vmware.com>
The driver qede can be automatically enabled if libz is available.
Fixes: ec94dbc573 ("qede: add base driver")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Avoid messages starting with "It" without describing what
it is talking about.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Require all symbols used by a DSO to be resolvable via LDLIBS at
build-time. Previously it was possible to build a library with
incomplete dependencies which could then fail at run-time.
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
When linking drivers as shared libraries, the dependencies need
to be marked as DT_NEEDED entries.
The crypto dependencies (libsso and libIPSec) are static libraries.
To make them linked in the shared PMDs, the code must relocatable:
- libIPSec_MB.a must be built with -fPIC
- libsso_kasumi.a must be built with KASUMI_CFLAGS=-DKASUMI_C
Fixes: 924e84f873 ("aesni_mb: add driver for multi buffer based crypto")
Fixes: eec136f3c5 ("aesni_gcm: add driver for AES-GCM crypto operations")
Fixes: 3aafc423cf ("snow3g: add driver for SNOW 3G library")
Fixes: 2773c86d06 ("crypto/kasumi: add driver for KASUMI library")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Some libraries were missing their dependency on eal, mbuf, mempool,
ring and kvargs.
It is revealed by the linker option "-z defs".
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
In other libraries, dependency list is always appended to, but
in commit 6cbf4f75e0 it with an assignment. This causes the
librte_eal dependency added in commit 6cbf4f75e0 to get discarded,
resulting in missing dependency on librte_eal.
Fixes: 6cbf4f75e0 ("mk: fix missing internal dependencies")
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
When building an external library with rte.extlib.mk, the internal
libraries were not found because the linker search path was the
external library install directory (RTE_OUTPUT/lib).
It is fixed by searching in the internal library install directory
(RTE_SDK_BIN/lib).
When building an internal library, RTE_SDK_BIN = RTE_OUTPUT.
Fixes: c6417ce61f ("mk: add build-time library directory to linker path")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
There is no need to have this parsing inlined in the header.
It brings kvargs dependency to every crypto drivers.
The functions are moved into rte_cryptodev.c.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Every new symbols in release 16.07 are exported with the version
string DPDK_16.07.
Also remove the empty local: section which is not needed because
inherited from the DPDK_2.0 block.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The verbose option was available but not advertised.
Fixes: 6e38dfe213 ("scripts: add verbose test build option")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
It is better to keep the line "Fixes:" longer than 75 characters
than splitting.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
ring_size value is wrongly type casted to uint16_t.
It should be type casted to uint32_t, as maximum
ring size is 28bit long. Wrong type cast
wrapping around the ring size values bigger than 65535.
Fixes: caa7028276 ("app/pdump: add tool for packet capturing")
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
replaced strncpy with snprintf for safely
copying the strings.
Coverity issue: 127350
Fixes: 278f945402 ("pdump: add new library for packet capture")
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
inside pdump_get_socket_path(), getenv can return
a NULL pointer if the match for SOCKET_PATH_HOME is
not found in the environment. NULL check is added to
return -1 immediately. Since pdump_get_socket_path()
returns -1 now, wherever this function is called
there the return value is checked and error message
is logged.
Coverity issue: 127344, 127347
Fixes: 278f945402 ("pdump: add new library for packet capture")
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
SOCKET_PATH_HOME is to specify environment variable "HOME",
so it should not contain "/pdump_sockets" in the macro.
So removed "/pdump_sockets" from SOCKET_PATH_HOME and
SOCKET_PATH_VAR_RUN. New changes will create pdump sockets under
/var/run/.dpdk/pdump_sockets for root users and
under HOME/.dpdk/pdump_sockets for non root users.
Changes are done in pdump_get_socket_path() to accommodate
new socket path changes.
Fixes: 278f945402 ("pdump: add new library for packet capture")
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
