The generic RTE_FLOW_ACTION_TYPE_MODIFY_FIELD action was
introduced by [1]. This action provides an unified way
to perform various arithmetic and transfer operations over
packet network header fields and packet metadata.
[1] 73b68f4c54a0 ("ethdev: introduce generic modify flow action")
On other side there are a bunch of multiple legacy actions,
that can be superseded by the generic MODIFY_FIELD action:
RTE_FLOW_ACTION_TYPE_OF_SET_MPLS_TTL
RTE_FLOW_ACTION_TYPE_OF_DEC_MPLS_TTL
RTE_FLOW_ACTION_TYPE_OF_SET_NW_TTL
RTE_FLOW_ACTION_TYPE_OF_DEC_NW_TTL sfc
RTE_FLOW_ACTION_TYPE_OF_COPY_TTL_OUT
RTE_FLOW_ACTION_TYPE_OF_COPY_TTL_IN
RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC bnxt, cxgbe, mlx5
RTE_FLOW_ACTION_TYPE_SET_IPV4_DST bnxt, cxgbe, mlx5
RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC cxgbe, mlx5
RTE_FLOW_ACTION_TYPE_SET_IPV6_DST cxgbe, mlx5
RTE_FLOW_ACTION_TYPE_SET_TP_SRC cxgbe, mlx5
RTE_FLOW_ACTION_TYPE_SET_TP_DST cxgbe, mlx5
RTE_FLOW_ACTION_TYPE_DEC_TTL mlx5, sfc
RTE_FLOW_ACTION_TYPE_SET_TTL mlx5
RTE_FLOW_ACTION_TYPE_SET_MAC_SRC cxgbe, mlx5
RTE_FLOW_ACTION_TYPE_SET_MAC_DST cxgbe, mlx5
RTE_FLOW_ACTION_TYPE_INC_TCP_SEQ mlx5
RTE_FLOW_ACTION_TYPE_DEC_TCP_SEQ mlx5
RTE_FLOW_ACTION_TYPE_INC_TCP_ACK mlx5
RTE_FLOW_ACTION_TYPE_DEC_TCP_ACK mlx5
RTE_FLOW_ACTION_TYPE_SET_IPV4_DSCP mlx5
RTE_FLOW_ACTION_TYPE_SET_IPV6_DSCP mlx5
RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID bnxt, cnxk, cxgbe, enic,
mlx5, octeontx2, sfc
RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP bnxt, cnxk, cxgbe, enic,
mlx5, octeontx2, sfc
RTE_FLOW_ACTION_TYPE_SET_TAG mlx5
RTE_FLOW_ACTION_TYPE_SET_META mlx5
This note deprecates the following RTE Flow actions,
as not supported by any of PMDs:
RTE_FLOW_ACTION_TYPE_OF_SET_MPLS_TTL
RTE_FLOW_ACTION_TYPE_OF_DEC_MPLS_TTL
RTE_FLOW_ACTION_TYPE_OF_SET_NW_TTL
RTE_FLOW_ACTION_TYPE_OF_COPY_TTL_OUT
RTE_FLOW_ACTION_TYPE_OF_COPY_TTL_IN
The following actions are supposed to be deprecated in 22.07
and replaced by generic field modify action:
RTE_FLOW_ACTION_TYPE_OF_DEC_NW_TTL
RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC
RTE_FLOW_ACTION_TYPE_SET_IPV4_DST
RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC
RTE_FLOW_ACTION_TYPE_SET_IPV6_DST
RTE_FLOW_ACTION_TYPE_SET_TP_SRC
RTE_FLOW_ACTION_TYPE_SET_TP_DST
RTE_FLOW_ACTION_TYPE_DEC_TTL
RTE_FLOW_ACTION_TYPE_SET_TTL
RTE_FLOW_ACTION_TYPE_SET_MAC_SRC
RTE_FLOW_ACTION_TYPE_SET_MAC_DST
RTE_FLOW_ACTION_TYPE_INC_TCP_SEQ
RTE_FLOW_ACTION_TYPE_DEC_TCP_SEQ
RTE_FLOW_ACTION_TYPE_INC_TCP_ACK
RTE_FLOW_ACTION_TYPE_DEC_TCP_ACK
RTE_FLOW_ACTION_TYPE_SET_IPV4_DSCP
RTE_FLOW_ACTION_TYPE_SET_IPV6_DSCP
RTE_FLOW_ACTION_TYPE_SET_TAG
RTE_FLOW_ACTION_TYPE_SET_META
The VLAN set actions are interrelated to VLAN header insertion/removal
and supported by multiple PMDs and widely used by applications and
not supposed to be deprecated due to potential large impact on
drivers and applications.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The doc's contain references to pmd but the proper use is to use PMD.
Cc: stable@dpdk.org
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Removing the use of driver following PMD as its unnecessary.
Cc: stable@dpdk.org
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Signed-off-by: Conor Fogarty <conor.fogarty@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The problem is solved using Rx metadata delivery negotiation API [1].
[1] commit f6d8a6d3fad7 ("ethdev: negotiate delivery of packet metadata from HW to PMD")
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
In the view of enabling unified driver for octeontx2(cn9k)/
octeontx3(cn10k), removing drivers/octeontx2 drivers and
replace with drivers/cnxk/ which supports both octeontx2(cn9k)
and octeontx3(cn10k) SoCs.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Add tested Intel platforms with Intel NICs to v21.11 release note.
Signed-off-by: Yan Xia <yanx.xia@intel.com>
Acked-by: Xueqin Lin <xueqin.lin@intel.com>
To enable bifurcated device support, rtnl_lock is released before calling
userspace callbacks and asynchronous requests are enabled.
But these changes caused more issues, like bug #809, #816. To reduce the
scope of the problems, the bifurcated device support related changes are
only enabled when it is requested explicitly with new 'enable_bifurcated'
module parameter.
And bifurcated device support is disabled by default.
So the bifurcated device related problems are isolated and they can be
fixed without impacting all use cases.
Bugzilla ID: 816
Fixes: 631217c76135 ("kni: fix kernel deadlock with bifurcated device")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Igor Ryzhov <iryzhov@nfware.com>
DMA on SN1022 SoC requires extra mapping of the memory via MCDI.
Signed-off-by: Viacheslav Galaktionov <viacheslav.galaktionov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
The ice DCF device reset has been supported. Release notes is updated
to synchronize with the feature.
Fixes: 1a86f4dbdf42 ("net/ice: support DCF device reset")
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Update public macros to have RTE_IP_FRAG_ prefix.
Update DPDK components to use new names.
Keep obsolete macro for compatibility reasons.
Renamed experimental function ``rte_frag_table_del_expired_entries``to
``rte_ip_frag_table_del_expired_entries`` to comply with other public
API naming convention.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This is the CUDA implementation of the gpudev library.
Functionalities implemented through CUDA Driver API are:
- Device probe and remove
- Manage device memory allocations
- Register/unregister external CPU memory in the device memory area
Signed-off-by: Elena Agostini <eagostini@nvidia.com>
Starting from FW version xx.32.0108. version, the BlueField 2 and
ConnectX-6 Dx adapters support crypto operations.
Add them to the supported PCI devices list.
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Tal Shnaiderman <talshn@nvidia.com>
The l3fwd example should use the reserved IPv4/v6 reserved address
ranges defined in RFC5735, RFC5180 and RFC863 discard protocol for
the port number in the exact match mode of L3 forwarding.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Increase the number of routes from 8 to 16 that are statically added for
lpm and em mode as most of the SoCs support more than 8 interfaces.
The number of routes added is equal to the number of ethernet devices
ports enabled through port mask.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
The DPAA DMA driver is an implementation of the dmadev APIs,
that provide means to initiate a DMA transaction from CPU.
The initiated DMA is performed without CPU being involved
in the actual DMA transaction. This is achieved via using
the QDMA controller of DPAA SoC.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Increase default value for config parameter RTE_LIBRTE_IP_FRAG_MAX_FRAG
from 4 to 8. This parameter controls maximum number of fragments per
packet in ip reassembly table. Increasing this value from 4 to 8 will
allow users to cover common case with jumbo packet size of 9KB and
fragments with default frame size (1500B).
As RTE_LIBRTE_IP_FRAG_MAX_FRAG is used in definition of public
structure (struct rte_ip_frag_death_row), this is an ABI change.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
In heterogeneous computing system, processing is not only in the CPU.
Some tasks can be delegated to devices working in parallel.
When mixing network activity with task processing there may be the need
to put in communication the CPU with the device in order to synchronize
operations.
An example could be a receive-and-process application
where CPU is responsible for receiving packets in multiple mbufs
and the GPU is responsible for processing the content of those packets.
The purpose of this list is to provide a buffer in CPU memory visible
from the GPU that can be treated as a circular buffer
to let the CPU provide fondamental info of received packets to the GPU.
A possible use-case is described below.
CPU:
- Trigger some task on the GPU
- in a loop:
- receive a number of packets
- provide packets info to the GPU
GPU:
- Do some pre-processing
- Wait to receive a new set of packet to be processed
Layout of a communication list would be:
-------
| 0 | => pkt_list
| status |
| #pkts |
-------
| 1 | => pkt_list
| status |
| #pkts |
-------
| 2 | => pkt_list
| status |
| #pkts |
-------
| .... | => pkt_list
-------
Signed-off-by: Elena Agostini <eagostini@nvidia.com>
In heterogeneous computing system, processing is not only in the CPU.
Some tasks can be delegated to devices working in parallel.
When mixing network activity with task processing there may be the need
to put in communication the CPU with the device in order to synchronize
operations.
The purpose of this flag is to allow the CPU and the GPU to
exchange ACKs. A possible use-case is described below.
CPU:
- Trigger some task on the GPU
- Prepare some data
- Signal to the GPU the data is ready updating the communication flag
GPU:
- Do some pre-processing
- Wait for more data from the CPU polling on the communication flag
- Consume the data prepared by the CPU
Signed-off-by: Elena Agostini <eagostini@nvidia.com>
In heterogeneous computing system, processing is not only in the CPU.
Some tasks can be delegated to devices working in parallel.
Such workload distribution can be achieved by sharing some memory.
As a first step, the features are focused on memory management.
A function allows to allocate memory inside the device,
or in the main (CPU) memory while making it visible for the device.
This memory may be used to save packets or for synchronization data.
The next step should focus on GPU processing task control.
Signed-off-by: Elena Agostini <eagostini@nvidia.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
In heterogeneous computing system, processing is not only in the CPU.
Some tasks can be delegated to devices working in parallel.
The new library gpudev is for dealing with GPGPU computing devices
from a DPDK application running on the CPU.
The infrastructure is prepared to welcome drivers in drivers/gpu/.
Signed-off-by: Elena Agostini <eagostini@nvidia.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Add the basic device probe and remove functions and initial
documentation for new hisilicon DMA drivers.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
For the Ethernet RQs, if there all receiving descriptors are
exhausted, the packets being received will be dropped. This behavior
prevents slow or malicious software entities at the host from
affecting the network. While for hairpin cases, even if there is no
software involved during the packet forwarding from Rx to Tx side,
some hiccup in the hardware or back pressure from Tx side may still
cause the descriptors to be exhausted. In certain scenarios it may be
preferred to configure the device to avoid such packet drops,
assuming the posting of descriptors will resume shortly.
To support this, a new devarg "delay_drop" is introduced. By default,
the delay drop is enabled for hairpin Rx queues and disabled for
standard Rx queues. This value is used as a bit mask:
- bit 0: enablement of standard Rx queue
- bit 1: enablement of hairpin Rx queue
And this attribute will be applied to all Rx queues of a device.
The "rq_delay_drop" capability in the HCA_CAP is checked before
creating any queue. If the hardware capabilities do not support
this delay drop, all the Rx queues will still be created without
this attribute, and the devarg setting will be ignored even if it
is specified explicitly. A warning log is used to notify the
application when this occurs.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Implement set/get_sram_policy which support both Rx/Tx
direction truflow type the specific SRAM bank.
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The accumulation of flow counters is not determined by the application
device arguments anymore. Instead it is now dictated by the platform
capabilities whether to do software based accumulation or not.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This change allows adding IP header matches for GRE flows that
does not specify outer IP header in the flow match pattern.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Enabled wildcard match support for IPv4 ingress flows.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Added support for socket redirect feature capability so applications
can enable or disable this feature. This patch contains the template
changes.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Update driver to read the multi root capability and ignore
PCI address check while creating ulp session when multi root
capability is enabled in the hardware. DPDK HSI version updated
from 1.10.2.44 to 1.10.2.68.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
* Added support for NAT action for destination IP and port
combination for Thor devices.
* Consolidated the encapsulation and NAT entries for scaling flows
with NAT actions.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add new vDPA PMD to support vDPA operations of Xilinx devices.
This patch implements probe and remove functions.
Signed-off-by: Vijay Kumar Srivastava <vsrivast@xilinx.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Adds event vector support to inline protocol offload mode.
By default vector support is disabled, it can be enabled by
using the option --event-vector.
Additional options to configure vector size and vector timeout are
also implemented and can be used by specifying --vector-size and
--vector-tmo.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add telemetry support to the IPsec GW sample app and add
support for per SA telemetry when using IPsec library.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add null auth support with lookaside IPsec on cn10k crypto PMDs.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add support to allow user to specific MSS for TCP TSO offload on a per SA
basis. MSS configuration in the context of IPsec is only supported for
outbound SA's in the context of an inline IPsec Crypto offload.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add support for transmit segmentation offload to inline crypto processing
mode. This offload is not supported by other offload modes, as at a
minimum it requires inline crypto for IPsec to be supported on the
network interface.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Currently, the compression block size is 15 by default, which
is the maximum.
Add "log-block-size" devarg to select compression block size manually.
The value provided should be between 4 to 15.
Any out-of-range value will be defaulted to 15.
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Add support for mlx5 crypto pmd on Windows OS.
Add changes to release note and PMD guide.
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The cryptodev library now registers commands with telemetry, and
implements the corresponding callback functions. These commands
allow a list of cryptodevs to be queried, as well as info and stats
for the corresponding cryptodev.
An example usage can be seen below:
Connecting to /var/run/dpdk/rte/dpdk_telemetry.v2
{"version": "DPDK 21.11.0-rc0", "pid": 1135019, "max_output_len": 16384}
--> /
{"/": ["/", "/cryptodev/info", "/cryptodev/list", "/cryptodev/stats", ...]}
--> /cryptodev/list
{"/cryptodev/list": [0,1,2,3]}
--> /cryptodev/info,0
{"/cryptodev/info": {"device_name": "0000:1c:01.0_qat_sym", \
"max_nb_queue_pairs": 2}}
--> /cryptodev/stats,0
{"/cryptodev/stats": {"enqueued_count": 0, "dequeued_count": 0, \
"enqueue_err_count": 0, "dequeue_err_count": 0}}
Signed-off-by: Rebecca Troy <rebecca.troy@intel.com>
Acked-by: Ciara Power <ciara.power@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Deprecation notice targeted for 21.11 has been committed with
following as the first commit of the series.
Fixes: b7c984291611 ("interrupts: add allocator and accessors")
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
