The pci_vfio_set_iommu_type is not PCI-specific and it is a private function
of the eal_pci_vfio.c. We just rename the function and make it available even
for non-PCI devices.
The pci_vfio_has_supported_extensions is not PCI-specific and it is a private
function of the eal_pci_vfio.c. We just rename the function and make it
available even for non-PCI devices.
The pci_vfio_get_container_fd is not PCI-specific. Move the implementation to
the eal_vfio.c as vfio_get_container_fd. No other code seems to call this
function.
Generalize the pci_vfio_get_group_no to not be PCI-specific. Move the general
implementation to the eal_vfio.c as vfio_get_group_no and leave the original
pci_vfio_get_group_no being a wrapper around this to preserve compilation
issues. The pci_vfio_get_group_no function will be removed later.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
We make the iommu_types public temporarily here until the depending stuff is
refactored. The iommu_types and dma_map functions will be changed to be private
inside the eal_vfio module later.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
This is for target i686-native-linuxapp-gcc and gcc6,
Compilation error is:
In file included from
include/rte_mempool.h:77:0, from
drivers/net/virtio/virtio_rxtx_simple.c:
In function `virtio_xmit_pkts_simple':
include/rte_memcpy.h:551:2: error:
array subscript is above array bounds
rte_mov16((uint8_t *)dst + 1 * 16, (const uint8_t *)src + 1 * 16);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Call stack is as following:
virtio_xmit_pkts_simple
virtio_xmit_cleanup
rte_mempool_put_bulk
rte_mempool_generic_put
__mempool_generic_put
rte_memcpy
The array used as source buffer in virtio_xmit_cleanup (free) is a
pointer array with 32 elements, in 32bit this makes 128 bytes.
in rte_memcpy() implementation, there a code piece as following:
if (size > 256) {
rte_move128(...);
rte_move128(...); <--- [1]
....
}
The compiler traces the array all through the call stack and knows the
size of array is 128 and generates a warning on above [1] which tries to
access beyond byte 128.
But unfortunately it ignores the "(size > 256)" check.
Giving a hint to compiler that variable "size" is related to the size of
the source buffer fixes compiler warning.
Fixes: 863bfb4744 ("mempool: optimize copy in cache")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Fixes a bug where rte_eth_vhost_get_queue_event would not return enabled
queues after a guest application restart.
Fixes: ee584e9710 ("vhost: add driver on top of the library")
Signed-off-by: Rich Lane <rich.lane@bigswitch.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
When the specified cores and memory lie on different NUMA socket with
physical NIC, vhost fails to set up Rx queue, and exits without any
hints. This could leads to confusion of users.
This patch fixes it by adding some error messages when calling ether
APIs returns errors.
Suggested-by: Yulong Pei <yulong.pei@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
There is a logic bug in this code, that could lead to null pointer
dereference when cvq is NULL. Fix this problem by changing logic
&& to logic ||.
>> CID 127480: Null pointer dereferences (FORWARD_NULL)
>> Dereferencing null pointer "cvq".
if (!cvq && !cvq->vq) {
...
}
Coverity issue: 127480
Fixes: 01ad44fd37 ("net/virtio: split Rx/Tx queue")
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
This patch explains current virtio PMD Rx/Tx callbacks, to help understand
what's the difference, and how to enable the right ones.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
When use strcpy() to copy string with length exceeding the last
parameter of strcpy(), it may lead to the destination string
unterminated.
We replaced strncpy with snprintf to make sure it's NULL terminated.
Coverity issue: 127476
Fixes: ce2eabdd43 ("net/virtio-user: add virtual device")
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The return value by rte_kvargs_parse is not free(d), which leads
to memory leak.
Coverity issue: 127482
Fixes: ce2eabdd43 ("net/virtio-user: add virtual device")
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
When parsing /proc/self/maps to get hugepage information, the string
was being copied with strcpy(), which could, theoretically but in fact
not possiblly, overflow the destination buffer. Anyway, to avoid the
false alarm, we replaced strncpy with snprintf for safely copying the
strings.
Coverity issue: 127484
Fixes: 6a84c37e39 ("net/virtio-user: add vhost-user adapter layer")
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
When return values of function calls are not checked, Coverity will
report errors like:
if (rte_kvargs_count(kvlist, VIRTIO_USER_ARG_PATH) == 1)
>>> CID 127477: (CHECKED_RETURN)
>>> Calling "rte_kvargs_process" without checking return value
(as is done elsewhere 25 out of 30 times).
rte_kvargs_process(kvlist, VIRTIO_USER_ARG_PATH,
&get_string_arg, &path);
Coverity issue: 127477, 127478
Fixes: ce2eabdd43 ("net/virtio-user: add virtual device")
Fixes: 6a84c37e39 ("net/virtio-user: add vhost-user adapter layer")
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
On some older systems, such as SUSE 11, the compiling error shows
as:
.../dpdk/drivers/net/virtio/virtio_user/virtio_user_dev.c:67:22:
error: ‘O_CLOEXEC’ undeclared (first use in this function)
The fix is to use EFD_CLOEXEC, which is defined in sys/eventfd.h,
instead of O_CLOEXEC which needs _GNU_SOURCE defined on some old
systems.
Fixes: 37a7eb2ae8 ("net/virtio-user: add device emulation layer")
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
With current config structure, all configuration parameters put into
common_base with a default value, and overwritten in environment file
if required, CONFIG_RTE_VIRTIO_USER is missing in common_base.
This fix is simple, by adding CONFIG_RTE_VIRTIO_USER=n as the default
macro value.
Fixes: ce2eabdd43 ("net/virtio-user: add virtual device")
Reported-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Fix potential memory leak raised by Coverity.
>>> Variable "vsocket" going out of scope leaks the storage it
>>> points to.
Coverity issue: 127483
Fixes: e623e0c6d8 ("vhost: add reconnect ability")
Reported-by: John McNamara <john.mcnamara@intel.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Avoid submitting doorbell when:
* no packets have been submitted to TX
* no free resources have been submitted while RX
Sending doorbell without actual work to be performed by device
violates ENA specification and can lead to unpredictable behavior.
Fixes: 1173fca25a ("ena: add polling-mode driver")
Signed-off-by: Alexander Matushevsky <matua@amazon.com>
Signed-off-by: Jan Medala <jan@semihalf.com>
enic_set_mac_address() meant to remove the old MAC address before
setting the new one, but accidentally tried removing the new MAC
address before setting the new MAC address.
Fixes: fefed3d1e6 ("enic: new driver")
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
enic_disable() removed the MAC address when a port was shut down but
enic_enable() didn't add the MAC address back when the port was
started again. Move where we set the MAC address for the adapter from
enic_setup_finish() to a enic_enable() so that port restarting works
properly.
Fixes: fefed3d1e6 ("enic: new driver")
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
This patch adds support for extended statistics for BNX2X PMD.
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Acked-by: Remy Horton <remy.horton@intel.com>
This patch adds support for extended statistics for QEDE PMD.
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Fixed issue could occur when Mbuf starvation happens in a middle of
reception of a segmented packet. In such a situation, the PMD has to
release all segments of that packet. The end condition was wrong
causing it to free an Mbuf still handled by the NIC.
Fixes: 9964b965ad ("net/mlx5: re-add Rx scatter support")
Reported-by: Yongseok Koh <yskoh@mellanox.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
In mlx5 rx function, the packet_type and ol_flags mbuf fields are not
properly initialized when no rx offload feature is enabled (checksum, l2
tun checksum, vlan_strip, crc). Thus, these fields can have a value
different of 0 depending on their value when the mbuf was freed.
This can result in an incorrect application behavior if invalid
ol_flags/ptype are set, or memory corruptions if IND_ATTACHED_MBUF is
set in ol_flags.
Fixes: 081f7eae24 ("mlx5: process offload flags only when requested")
Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The enic PMD was using the same variables in the enic structure to
track two different things. Initially rq_count, wq_count, cq_count,
and intr_count were set to the values obtained from the VIC adapters
as the maximum resources allocated on the VIC, then in
enic_set_vnic_res(), they were set to the counts of resources actually
used, discarding the initial values. The checks in enic_set_vnic_res()
were technically incorrect if it is called more than once on a port,
which happens when using bonding, but were harmless in practice as the
checks couldn't fail on the second call.
The enic rx-scatter patch misunderstood the subtleties of
enic_set_vnic_res(), and naively added a multiply by two to the
rq_count check. This resulted in the rq_count check failing when
enic_set_vnic_res() was called a second time, ie when using bonding.
This patch adds new variables to the enic structure to track the
maximum resources the VIC is configured to provide so that the
information isn't later lost and calls to enic_set_vnic_res() do
the expected thing.
Fixes: 856d7ba7ed ("net/enic: support scattered Rx")
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Update the 'High Performance of Small Packets on 40G NIC' section of the
Getting Started Guide (GSG) as the firmware version referenced for a NIC
using the i40e driver was version 4.2.5 which is no longer validated.
Instruct users to consult release notes for current validated firmware
versions.
Signed-off-by: Ian Stokes <ian.stokes@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
When calling i40e_flowtype_to_pctype in i40e_get_hash_filter_global_config
and i40e_set_hash_filter_global_config, function i40e_flowtype_to_pctype
will be possibly make an out-of-bounds access, because size of the array
is 15. So check the flow type is valid before calling
i40e_flowtype_to_pctype.
In the process fix other occurances of the same problem
Coverity issue: 37793, 37794
Fixes: 782c8c92f1 ("i40e: add hash configuration")
Fixes: f2b2e2354b ("i40e: split function for hash and flow director input")
Fixes: 98f0557076 ("i40e: configure input fields for RSS or flow director")
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Null-checking vsi suggests that it may be null, but it
has been dereferenced before null-checking. So move the
check to before the assignment statement using the pointer.
Coverity issue: 119265, 119266
Fixes: d0a349409b ("i40e: support AQ based RSS config")
Fixes: 647d1eaf75 ("i40evf: support AQ based RSS config")
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The condition, "(pf->flags | I40E_FLAG_VMDQ)" will always be true,
regardless of the value of the flags operand, because I40E_FLAG_VMDQ
is 4ULL - meaning at least one bit will always be set in the result.
That will cause log error when VMDq is disabled.
Since the original intent behind the condition is to check if VMDq
is enabled, fix the code by changing "|" to "&".
Coverity issue: 13219, 13221
Fixes: 4805ed59e9 ("i40e: enhance mac address operations")
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Currently we are wrongly setting HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_MCAST
flag in bnxt_hwrm_cfa_l2_set_rx_mask() which is preventing promiscuous
and multicast promiscuous settings from working correctly.
This patch fixes it.
Fixes: 244bc98b0d ("net/bnxt: set L2 Rx mask")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Memory zones should be freed using the proper memzone_free function not
rte_free which is for malloc calls.
After allocating memzone it's required to zeroize memory in it, so do so
before storing the handle for later freeing.
Fixes: 9ba7981ec9 ("ena: add communication layer for DPDK")
Signed-off-by: Alexander Matushevsky <matua@amazon.com>
Signed-off-by: Jakub Palider <jpa@semihalf.com>
Signed-off-by: Jan Medala <jan@semihalf.com>
While allocating (coherent) memory, get information about calling node Id
and pass that as parameter when reserving a memzone.
Signed-off-by: Alexander Matushevsky <matua@amazon.com>
Signed-off-by: Jakub Palider <jpa@semihalf.com>
Signed-off-by: Jan Medala <jan@semihalf.com>
Depending on HW revision readless communcation between host and device
may be unavailable. In that case prevent PMD from setting up readless
communication mechanism.
"readless" refers to ability to read ENA registers without actually
issuing read request from host (x86). Instead, host programs 2 registers
on the device that triggers a DMA from device to host and reports a
register value. However, this functionality is not going to be available
in all types of devices. The decision if this mode is supported or not,
is taken from revision_id in pci configuration space.
Signed-off-by: Alexander Matushevsky <matua@amazon.com>
Signed-off-by: Jakub Palider <jpa@semihalf.com>
Signed-off-by: Jan Medala <jan@semihalf.com>
Increase maintenance and debug potentiality with dedicated areas of memory
where additional information can be stored by the ENA device.
Signed-off-by: Alexander Matushevsky <matua@amazon.com>
Signed-off-by: Jakub Palider <jpa@semihalf.com>
Signed-off-by: Jan Medala <jan@semihalf.com>
Synchronize ENA communication layer with latest ENA FW version.
Signed-off-by: Alexander Matushevsky <matua@amazon.com>
Signed-off-by: Jakub Palider <jpa@semihalf.com>
Signed-off-by: Jan Medala <jan@semihalf.com>
If you stop, then start a port that had already received some packets,
the NIC could fetch discriptors from the wrong location. This could
effectivly reduce the size of the Rx queue by a random amount and
cause packet drop or reduced performance.
Reset the NIC fetch index to 0 when allocating and posting mbuf
addresses to the NIC.
Fixes: 947d860c82 ("enic: improve Rx performance")
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Nelson Escobar <neescoba@cisco.com>
If you stop then start a port that had already sent some packets,
there was a segfault due to not resetting the number of completed
sends to zero.
Fixes: a3b1e9551c ("net/enic: streamline mbuf handling in Tx path")
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Fixes: 62072098b5 ("mlx5: support setting link up or down")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
According to the documentation, the function
priv_set_flags(priv, keep, flags) should not modify the flags
in "keep" mask.
So 'flags' argument should be masked with '~keep' before ORing
it with the previous flags value.
This avoids messing up the kernel interface flags when calling
priv_set_flags(priv, ~IFF_UP, ~IFF_UP) in priv_set_link():
$ ip link
26: eth0: BROADCAST,MULTICAST,NOARP,ALLMULTI,PROMISC,DEBUG,\
DYNAMIC,AUTOMEDIA,PORTSEL,NOTRAILERS
Fixes: 7fae69eeff ("mlx4: new poll mode driver")
Fixes: 771fa900b7 ("mlx5: introduce new driver for Mellanox ConnectX-4 adapters")
Reported-by: Fengtian Guo <fengtian.guo@6wind.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
We find that when traffic is light, a small number of packets will have
wrong metadata (e.g. packet type), however this issue will not happen
when traffic is heavy.
The root cause is some fields in fm10k_rx_desc are read at the wrong time,
since the descriptor (being 16-bytes big) is not read as a single atomic
operation. When the input speed is slower than software's capability,
fm10k scalar Rx function accesses descriptors at about the same time
as HW writes them, so the scenario can occur: some fields like pkt_info
in fm10k_rx_desc are read before HW writeback but some fields like DD bit
are read after HW writeback, this will lead to the later packet parsing
function using incorrect value.
This patch fixes this issue by reading and parsing Rx descriptor only after
first checking that the DD bit is set.
Fixes: 4b61d3bfa9 ("fm10k: add receive and tranmit")
Fixes: c82dd0a7bf ("fm10k: add scatter receive")
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Allocate maximum supported hardware ring hardware descriptors
memory on the first rte_eth_dma_zone_reserve call in order to
get sufficient hardware ring buffer space on subsequent queue
setup request with different queue size.
Fixes: aa0d976e50 ("net/thunderx: add Rx queue setup and release")
Fixes: 3f3c6f9724 ("net/thunderx: add Tx queue setup and release")
Fixes: 7413feee66 ("net/thunderx: add device start/stop and close")
Signed-off-by: Kamil Rytarowski <kamil.rytarowski@caviumnetworks.com>
Signed-off-by: Zyta Szpak <zyta.szpak@semihalf.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The ixgbe driver does not compile if CONFIG_RTE_IXGBE_RX_OLFLAGS_ENABLE=n
because the macro has not the proper number of parameters. To reproduce
the issue:
make config T=x86_64-native-linuxapp-gcc
sed -i 's,\(IXGBE_RX_OLFLAGS_ENABLE\)=y,\1=n,' build/.config
make -j4
[...]
ixgbe_rxtx_vec_sse.c: In function ‘_recv_raw_pkts_vec’:
ixgbe_rxtx_vec_sse.c:345:53: error:
macro "desc_to_olflags_v" passed 3 arguments, but takes just 2
desc_to_olflags_v(descs, vlan_flags, &rx_pkts[pos]);
^
ixgbe_rxtx_vec_sse.c:345:3: error:
‘desc_to_olflags_v’ undeclared (first use in this function)
desc_to_olflags_v(descs, vlan_flags, &rx_pkts[pos]);
^
ixgbe_rxtx_vec_sse.c:231:10: error:
variable ‘vlan_flags’ set but not used
uint8_t vlan_flags;
^
This patch fixes the number of arguments in the macro, and ensures that
vlan_flags is marked as used to avoid the third error.
Fixes: b37b528d95 ("mbuf: add new Rx flags for stripped VLAN")
Reported-by: Amin Tootoonchian <amint@icsi.berkeley.edu>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
For VLAN filtering, the VLAN table should be enabled.
But the VLAN table is disabled by default until a rule is added.
In promiscuous mode no rule is added to enable the VLAN table.
This patch clears promiscuous VLAN flag on VSI, and adds a
rule to enable the VLAN table to fix VLAN filtering in promiscuous
mode.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
We need sc->igu_sb_cnt determined before calculating the number of queues
we can support, so move the call to bnx2x_init_rte() to later in the code.
Fixes: 3754101cd7 ("net/bnx2x: fix MSIX vector and VF resource counts")
Signed-off-by: Charles (Chas) Williams <ciwillia@brocade.com>
Acked-by: Rasesh Mody <rasesh.mody@qlogic.com>
If the PF hasn't assigned an address, assign one randomly. While here,
convert to use DPDK's ether address utility routines.
Fixes: 540a211084 ("bnx2x: driver core")
Signed-off-by: Charles (Chas) Williams <ciwillia@brocade.com>
Acked-by: Rasesh Mody <rasesh.mody@qlogic.com>
Add API, NUMA, HW, SW, FW and VMDq to list of words to capitalize properly.
Since VMDq is a bit unusual, add it as special case check so we can
print an error message giving the correct way to write it.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
A driver patch under net should start with "net/<driver name>" or if
a patch touch multiple drivers, it should only start with "net:".
The same apply for crypto.
A patch touching all drivers (net + crypto) should start with "drivers:".
Longer prefixes like "net/mlx:" (for mlx4/mlx5) or "net/e1000/base:" are
handled by not checking the colon.
The directories doc/ and config/ are ignored because a driver patch
can modify them.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
