Add a known issue to warn that PF reset event/request is not
handled by any VF drivers till 2.2, and which should be fixed
in the future.
Reported-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
This patch updates the release notes with the features
added to ip_pipeline application.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Fix typos in sample console commands.
Remove "user@target:~$" prefixes in command lines.
Add --socket-mem 1024 to vhost-switch command lines.
Without the --socket-mem parameter all hugepages will be allocated
to vhost-switch, leaving no memory for the VM.
Add --disable-hw-vlan-filter parameter to testpmd command lines.
Without this parameter testpmd fails on startup in the VM.
Increase value of --sock-mem parameter to testpmd as original
value was too small.
Fixes: d0dff9ba44 ("doc: sample application user guide"
Fixes: 9bc23cb820 ("doc: add vhost-user to sample guide")
Fixes: 43866bf71d ("doc: fix vhost sample parameter")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Add note to the documentation that only x86_64 versions of the external
libraries are currently provided.
Signed-off-by: Matej Vido <matejvido@gmail.com>
- Update features, limitations, configuration and prerequisites sections.
- Add a note to describe RSS behavior differences with librte_pmd_mlx4 in
testpmd.
Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
-Split "Features" and "Limitations" sections.
-Update limitations with missing information.
-Update prerequisites with supported MLNX_OFED release, firmware and
CPU architectures.
-Enhance usage example with openibd script.
Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This documentation covers introductions and limitations on Intel
FM10000 series products.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Update interrupt related limitations for e1000em nic.
It only support one interrupt source and not support auto-clear.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Add a new guide doc as part of the Linux Getting Started Guide.
The document is a step-by-step guide on how to get high performance
with DPDK on an Intel platform.
It is designed for users who are not familiar with DPDK but would like
to get the best performance with NICs.
Signed-off-by: Qian Xu <qian.q.xu@intel.com>
Update the documentation to reflect that the minimum Linux kernel
requirement for DPDK 2.2 has increased from 2.6.33 to 2.6.34.
Compatibility with kernel 2.6.33 was dropped, after discussion on
the mailing list, in the following commit:
2e6e9e2157 ("igb_uio: use existing PCI macros")
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Change the Sphinx default theme from "alabaster" to the ReadTheDocs
theme. See for example:
http://dpdk.readthedocs.org/en/latest/
This looks better for technical documentation and in particular
it has a 80 char wide verbatim block rendering.
Also add logos for the html and latex docs.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Remove requirement for occasionally hard to find/install
DejaVuSansMono font. It isn't gnerally required anyway.
The default mono font is sufficient.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Turn off the permalink symbol in the Sphinx generated html docs.
This is a distracting mouseover when reading the docs and links
to sections can still be obtained from the doc index.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
This commit removes the performance thread example from
examples/Makefile, and marks the example as "experimental"
in the release note, and it its API headers files.
Signed-off-by: Ian Betts <ian.betts@intel.com>
This commit adds the sample application user guide for the
performance thread sample application.
Signed-off-by: Ian Betts <ian.betts@intel.com>
Acked-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Further enhancements to the userspace ethtool implementation that was
submitted in 2.1 and packaged as a self-contained sample application.
Implements an rte_ethtool shim layer based on rte_ethdev API, along
with a command prompt driven demonstration application.
Signed-off-by: Remy Horton <remy.horton@intel.com>
In addition to git tags, support validating abi between any legal
gitrevisions(7) syntaxes, such as "validate-abi.sh -1 . <target>"
"validate-abi.sh master mybranch <target>" etc in addition to
validating between tags. Makes it easier to run the validator
for in-development work.
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Fix the examples in the netmap compatibility sample application
docs which referred to the packet_reordering application.
Also fix some minor rst formatting issues.
Reported-by: Qian Xu <qian.q.xu@intel.com>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Fix repeated typo in the "Compiling the Application" section of
almost all of the sample app docs.
This generally gets copied into new sample app guides.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The patch adds missing new line to "Managing ABI updates" section.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: John McNamara <john.mcnamara@intel.com>
Fixes: ab3257e13d ("app/testpmd: add command to display queue info")
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Correct the sample code in the pcap_ring.rst file to match the latest
rte_eth_ring.c code.
The parameters to the rte_eth_from_rings() function have changed since
the documentation was written.
The API change occurred before DPDK 1.8 when the rst files were added.
The original documentation on which the pcap_ring.rst file was based was
not correct.
Fixes: fc1f2750a3 ("doc: programmers guide")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Lookup burst size was changed for exact match
from 4 to 8, for both ipv4 and ipv6, but actually only
4 keys were being looked up for ipv6, instead of 8,
causing random segmentation faults.
Fixes: 80fcb4d4 ("examples/l3fwd: increase lookup burst size to 8")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
examples/vhost_xen/main.c:659:61: error: has no member named data
rte_memcpy((void *)(uintptr_t)buff_addr, (const void*)buff->data, rte_pktmbuf_data_len(buff));
^
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
In order to be installed system-wise, this application needs
a prefix. So it makes clear that it is DPDK related.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
The old install command was:
make install T=x86_64-native-linuxapp-gcc DESTDIR=install
It still works and can be replaced by these more standard commands:
make config T=x86_64-native-linuxapp-gcc 0=x86_64-native-linuxapp-gcc
make O=x86_64-native-linuxapp-gcc
make install O=x86_64-native-linuxapp-gcc prefix= DESTDIR=install
It means the "make install" do not perform any compilation anymore when T
is not used. It is done only in pre_install to keep compatibility with the
old syntax based on T= option.
The default prefix /usr/local is empty in the T= case which is
used only for a local install.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
The rule "install" follows these conventions:
http://gnu.org/prep/standards/html_node/Directory-Variables.htmlhttp://gnu.org/prep/standards/html_node/DESTDIR.html
The variable sdkdir has been added to the more standards ones,
to configure the directory used with RTE_SDK when using the DPDK makefiles
to build an application.
It is still possible to build DPDK with the "install T=" rule without
specifying any DESTDIR. In such case there is no install, as before.
The old usage of an installed SDK is:
make -C examples/helloworld RTE_SDK=$(readlink -m $DESTDIR) \
RTE_TARGET=x86_64-native-linuxapp-gcc
RTE_TARGET can be specified but is useless now with an installed SDK.
The RTE_SDK directory must now point to a different path depending of
the installation.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
The multi-target install create some subdirectories with the target name
which is not standard for a "make install" procedure.
The uninstall procedure cannot be applied properly (without removing
all files in a directory). It would need to pre-compute paths.
As it is a packaging issue, it is removed from the build system capabilities.
The variable BUILD_DIR is also renamed to RTE_OUTPUT used in other files.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
It is not possible to test every configs on an unique machine.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
The function rte_mempool_obj_iter used in mlx drivers
was not exported. So the driver loading was failing:
EAL: open shared lib librte_pmd_mlx4.so
EAL: x86_64-native-linuxapp-gcc/lib/librte_pmd_mlx4.so:
undefined symbol: rte_mempool_obj_iter
Fixes: 9d41beed24 ("lib: provide initial versioning")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
If use DPDK PF + DPDK VF on igb NICs, we find the MAC address of VF
port is always 0. Because we forget to give it a value if this MAC
address is not assigned by PF. This patch'll assign a random MAC
address to igb VF port as ixgbe does.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch relates to ABI change proposed for librte_table.
The key_mask parameter is added for 8-byte and 16-byte
key extendible bucket and LRU tables.The release notes
is updated and the deprecation notice is removed.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Added functions for adding/deleting multiple records to table owned by
pipeline. The LIBABIVER number is incremented.
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
New functions prototypes for bulk add/delete added to table API. New
functions allows adding/deleting multiple records with single function
call. For now those functions are implemented only for ACL table. For
other tables these function pointers are set to NULL.
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The crypto API is in an early state.
It requires more discussions and experiments to declare it stable,
as discussed in http://dpdk.org/ml/archives/dev/2015-November/028634.html
A documentation section will be required in the guides.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch provides the initial implementation of the AES-NI multi-buffer
based crypto poll mode driver using DPDK's new cryptodev framework.
This PMD is dependent on Intel's multibuffer library, see the whitepaper
"Fast Multi-buffer IPsec Implementations on Intel® Architecture
Processors", see ref 1 for details on the library's design and ref 2 to
download the library itself. This initial implementation is limited to
supporting the chained operations of "hash then cipher" or "cipher then
hash" for the following cipher and hash algorithms:
Cipher algorithms:
- RTE_CRYPTO_CIPHER_AES_CBC (with 128-bit, 192-bit and 256-bit keys supported)
Authentication algorithms:
- RTE_CRYPTO_AUTH_SHA1_HMAC
- RTE_CRYPTO_AUTH_SHA256_HMAC
- RTE_CRYPTO_AUTH_SHA512_HMAC
- RTE_CRYPTO_AUTH_AES_XCBC_MAC
Important Note:
Due to the fact that the multi-buffer library is designed for
accelerating IPsec crypto operation, the digest's generated for the HMAC
functions are truncated to lengths specified by IPsec RFC's, ie RFC2404
for using HMAC-SHA-1 with IPsec specifies that the digest is truncate
from 20 to 12 bytes.
Build instructions:
To build DPDK with the AESNI_MB_PMD the user is required to download
(ref 2) and compile the multi-buffer library on there system before
building DPDK. The environmental variable AESNI_MULTI_BUFFER_LIB_PATH
must be exported with the path where you extracted and built the multi
buffer library and finally set CONFIG_RTE_LIBRTE_PMD_AESNI_MB=y in
config/common_linuxapp.
Current status: It's doesn't support crypto operation
across chained mbufs, or cipher only or hash only operations.
ref 1:
https://www-ssl.intel.com/content/www/us/en/intelligent-systems/intel-technology/fast-multi-buffer-ipsec-implementations-ia-processors-p
ref 2: https://downloadcenter.intel.com/download/22972
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
This patch adds a PMD for the Intel Quick Assist Technology DH895xxC
hardware accelerator.
This patch depends on a QAT PF driver for device initialization. See
the file docs/guides/cryptodevs/qat.rst for configuration details
This patch supports a limited subset of QAT device functionality,
currently supporting chaining of cipher and hash operations for the
following algorithmsd:
Cipher algorithms:
- RTE_CRYPTO_CIPHER_AES_CBC (with 128-bit, 192-bit and 256-bit keys supported)
Hash algorithms:
- RTE_CRYPTO_AUTH_SHA1_HMAC
- RTE_CRYPTO_AUTH_SHA256_HMAC
- RTE_CRYPTO_AUTH_SHA512_HMAC
- RTE_CRYPTO_AUTH_AES_XCBC_MAC
Some limitation on this patchset which shall be contributed in a
subsequent release:
- Chained mbufs are not supported.
- Hash only is not supported.
- Cipher only is not supported.
- Only in-place is currently supported (destination address is
the same as source address).
- Only supports session-oriented API implementation (session-less
APIs are not supported).
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: John Griffin <john.griffin@intel.com>
Signed-off-by: Des O Dea <des.j.o.dea@intel.com>
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
The functions rte_eth_rx_queue_count and rte_eth_descriptor_done are
supported by very few PMDs. Therefore, it is best to check for support
for the functions in the ethdev library, so as to avoid run-time crashes
at run-time if the application goes to use those APIs. Similarly, the
port parameter should also be checked for validity.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The functions for rx/tx burst, for rx_queue_count and descriptor_done in
the ethdev library all had two copies of the code. One copy in
rte_ethdev.h was inlined for performance, while a second was in
rte_ethdev.c for debugging purposes only. We can eliminate the second
copy of the functions by moving the additional debug checks into the
copies of the functions in the header file. [Any compilation for
debugging at optimization level 0 will not inline the function so the
result should be same as when the function was in the .c file.]
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Increase the number of possible subports per port to allow up to 16 bits.
It is still possible that this will require excessive RAM.
Although mbuf structure is changed, it is ABI compatiable since it
just expands existing sched part of structure to overlap pre-existing hole
in the hash element of structure.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Describe how applications can benefit from CQE compression.
Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Issue: l3fwd app need the ptype in the mbuf to forward the packets properly.
But now some drivers like virtio driver and FVL vPMD will not set the ptype
in mbuf, so l3fwd cannot work properly on that kind of drivers.
Configure the vector PMD option as no for default as a work around for l3fwd.
After the l3fwd app can handle the undefined ptype or the i40e vPMD can
return the ptype, the option will be set as yes for default again.
Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Add virtual PMD which communicates with COMBO cards through sze2
layer using libsze2 library.
Since link_speed is uint16_t, there can not be used number for 100G
speed, therefore link_speed is set to ETH_LINK_SPEED_10G until the
type of link_speed is solved.
Signed-off-by: Matej Vido <matejvido@gmail.com>
Adds functions for detecting and reporting the live-ness of LCores,
the primary requirement of which is minimal overheads for the
core(s) being checked. Core failures are notified via an application
defined callback.
Signed-off-by: Remy Horton <remy.horton@intel.com>
Make DPDK run on ARMv7-A architecture. This patch assumes
ARM Cortex-A9. However, it is known to be working on Cortex-A7
and Cortex-A15.
Signed-off-by: Vlastimil Kosar <kosar@rehivetech.com>
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Add a sample app guide for the ptpclient application.
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Reviewed-by: John McNamara <john.mcnamara@intel.com>
Add additional functions to support the existing IEEE1588
functionality.
* rte_eth_timesync_write_time(): set the device clock time.
* rte_eth_timesync_read_time(): get the device clock time.
* rte_eth_timesync_adjust_time(): adjust the device clock time.
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Reviewed-by: John McNamara <john.mcnamara@intel.com>
One of the ways to reproduce the issue:
testpmd <EAL-OPTIONS> -- -i --txqflags=0
testpmd> set fwd txonly
testpmd> set txpkts 64,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4
testpmd> set txsplit rand
testpmd> start
After some time TX on ixgbe queue will hang,
and all packet transmission on that queue will stop.
This bug was first reported and investigated by
Vlad Zolotarov <vladz@cloudius-systems.com>:
"We can reproduce this issue when stressed the xmit path with a lot of highly
fragmented TCP frames (packets with up to 33 fragments with non-headers
fragments as small as 4 bytes) with all offload features enabled."
The root cause is that ixgbe_xmit_pkts() in some cases violates the HW rule
that the distance between TDs with RS bit set should not exceed 40 TDs.
>From the latest 82599 spec update:
"When WTHRESH is set to zero, the software device driver should set the RS bit
in the Tx descriptors with the EOP bit set and at least once in the 40
descriptors."
The fix is to make sure that the distance between TDs with RS bit set
would never exceed HW limit.
As part of that fix, tx_rs_thresh for ixgbe PMD is not allowed to be greater
then to 32 to comply with HW restrictions.
With that fix slight slowdown for the full-featured ixgbe TX path
might be observed (from our testing - up to 4%).
ixgbe simple TX path is unaffected by that patch.
Reported-by: Vlad Zolotarov <vladz@cloudius-systems.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
For CSUM forwarding mode add ability to copy & split outgoing packet
into the new mbuf that consists of multiple segments.
For TXONLY and CSUM forwarding modes add ability to make number of
segments in the outgoing packet to vary on a per packet basis.
Number of segments and size of each segment is controlled by
'set txpkts' command.
Split policy is controlled by 'set txsplit' command.
Possible values are: on | off | rand.
Tha allows to increase test coverage for TX PMD codepaths.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This fixes the issue of not freeing memzone in a call to free the
memory for adminq DMA.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
After implementing the fdir new modes for x550, the CLIs are modified.
Forgot to update the related help info and doc.
Fixes: 53b2bb9b7e ("app/testpmd: new flow director commands")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
A fix in hash library was in the drivers section.
Some ABI changes have been done without removing the notices.
Fixes: 62dbd2ffea ("ethdev: add more flow director modes")
Fixes: 381316f6a2 ("vhost-user: support protocol features")
Fixes: 5915699153 ("hash: fix scaling by reducing contention")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The patch enables rx interrupt support on i40e PF non-IOV mode.
Per queue rx interrupt works on vfio, however on uio, all rx queues
share one interrupt vector.
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
When ixgbe runs as a PF, mbox interrupt is prerequisite to make VF
start normally.
And PF sometimes won't 'dev_start', so the mbox interrupt register
during 'dev_init' is required.
The patch rolls back the interrupt register for mbox,lsc to the 'dev_init'.
As UIO doesn't support multiple vector, mbox has to occupy the only one.
It adds condition check on 'dev_start', rxq interrupt is not allowed
when PF running in IOV mode via UIO.
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
When igb runs as a PF, mbox interrupt is prerequisite to make VF
start normally.
And PF sometimes won't 'dev_start', so the mbox interrupt register
during 'dev_init' is required.
The patch rolls back the interrupt register for mbox,lsc to the 'dev_init'.
As UIO doesn't support multiple vector, mbox has to occupy the only one.
It adds condition check on 'dev_start', rxq interrupt is not allowed
when PF running in IOV mode via UIO.
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
The old statistics on i40e only counted the packets on ports.
So the discarding packets on VSI were not counted.
This patch is to make statistics for packets both on ports and VSI.
Also update release notes.
Signed-off-by: Xutao Sun <xutao.sun@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
If user has not added an all zero key in the hash table,
and tries to look it up, it results in an incorrect hit,
as dummy slot in the key table has all zero as well.
Fixes: 48a3991196 ("hash: replace with cuckoo hash implementation")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
If using multiple cores on a system with hardware transactional
memory support, thread scaling does not work, as there was a single
point in the hash library which is a bottleneck for all threads,
which is the "free_slots" ring, which stores all the indices of
the free slots in the table.
This patch fixes the problem, by creating a local cache per logical core,
which stores locally indices of free slots,
so most times, writer threads will not interfere each other.
Fixes: 48a3991196 ("hash: replace with cuckoo hash implementation")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
When creating a ring, a memzone is created to allocate it in memory,
but the ring could not be freed, as memzones could not be.
Since memzones can be freed now, then rings can be as well,
taking into account if they were initialized using pre-allocated memory
(in which case, memory should be freed externally) or using rte_memzone_reserve
(with rte_ring_create), freeing the memory with rte_memzone_free.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Test commands are added to support selecting different length of GRE key.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
By default, only first 3 bytes of GRE key will be used for hash or
FD calculation. With these changes, it can select 3 or 4 bytes of
GRE key for hash or FD calculation.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Test commands are added to support selecting input set, or adding
new input set per different pctype.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
The default input set of fields of a received packet are loaded from
firmware, which cannot be modified even users want to use different
fields for RSS or flow director. Here adds more flexibilities of
selecting packet fields for hash calculation or flow director for
users.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
It enlarges the number of supported queues to hardware allowed
maximum. There was a software limitation of 64 per physical port
which is not reasonable.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Remove the deprecation tag and notice for imissed as it is a generic
register that accounts for packets that were dropped by the HW,
because there are no available mbufs (RX queues are full). imissed is
different to ierrors and can help with general debug.
Fixes: 49f386542a ("ethdev: remove driver specific stats")
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Add xstats() functions and statistic strings to virtio PMD.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
Add xstats() functions and statistic strings.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
Add implementation of xstats() functions in i40evf PMD.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
Add xstats functions to i40e PMD, allowing extended statistics
to be retrieved from the NIC and exposed to the DPDK.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
Add xstats_get() and xstats_reset() functions to igb
driver, and the necessary strings to expose these
NIC statistics.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
Update the strings used for presenting stats to adhere
to the scheme previously presented. Updated xstats_get()
function to handle Q information only if xstats() is not
implemented in the PMD, providing the PMD with the needed
flexibility to expose its extended Q stats.
Add extended statistic section to the programmers
guide, poll mode driver section. This section describes
how the strings stats are formatted, and how the client
code can use this to gather information about the stat.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
Bulk free of mbufs when clean used ring.
Shift operation of idx could be saved if vq_free_cnt means
free slots rather than free descriptors.
TODO: rearrange vq data structure, pack the stats var together so that
we could use one vec instruction to update all of them.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
With fixed avail ring, we don't need to get desc idx from avail ring.
virtio driver only has to deal with desc ring.
This patch uses vector instruction to accelerate processing desc ring.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
In DPDK based switching environment, mostly vhost runs on a dedicated core
while virtio processing in guest VMs runs on different cores.
Take RX for example, with generic implementation, for each guest buffer,
a) virtio driver allocates a descriptor from free descriptor list
b) modify the entry of avail ring to point to allocated descriptor
c) after packet is received, free the descriptor
When vhost fetches the avail ring, it need to fetch the modified L1 cache from
virtio core, which is a heavy cost in current CPU implementation.
This idea of this optimization is:
allocate the fixed descriptor for each entry of avail ring, so avail ring will
always be the same during the run.
This removes L1M cache transfer from virtio core to vhost core for avail ring.
(Note we couldn't avoid the cache transfer for descriptors).
Besides, descriptor allocation and free operation is eliminated.
This also makes vector procesing possible to further accelerate the processing.
This is the layout for the avail ring(take 256 ring entries for example), with
each entry pointing to the descriptor with the same index.
avail
idx
+
|
+----+----+---+-------------+------+
| 0 | 1 | 2 | ... | 254 | 255 | avail ring
+-+--+-+--+-+-+---------+---+--+---+
| | | | | |
| | | | | |
v v v | v v
+-+--+-+--+-+-+---------+---+--+---+
| 0 | 1 | 2 | ... | 254 | 255 | desc ring
+----+----+---+-------------+------+
|
|
+----+----+---+-------------+------+
| 0 | 1 | 2 | | 254 | 255 | used ring
+----+----+---+-------------+------+
|
+
This is the ring layout for TX.
As we need one virtio header for each xmit packet, we have 128 slots available.
++
||
||
+-----+-----+-----+--------------+------+------+------+
| 0 | 1 | ... | 127 || 128 | 129 | ... | 255 | avail ring
+--+--+--+--+-----+---+------+---+--+---+------+--+---+
| | | || | | |
v v v || v v v
+--+--+--+--+-----+---+------+---+--+---+------+--+---+
| 128 | 129 | ... | 255 || 128 | 129 | ... | 255 | desc ring for virtio_net_hdr
+--+--+--+--+-----+---+------+---+--+---+------+--+---+
| | | || | | |
v v v || v v v
+--+--+--+--+-----+---+------+---+--+---+------+--+---+
| 0 | 1 | ... | 127 || 0 | 1 | ... | 127 | desc ring for tx dat
+-----+-----+-----+--------------+------+------+------+
||
||
++
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
Add new file fm10k_rxtx_vec.c and add it into compiling.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Add the ability for the upper layer to query RX/TX queue information.
Add into rte_eth_dev_info new fields to represent information about
RX/TX descriptors min/max/alig nnumbers per queue for the device.
Add new structures:
struct rte_eth_rxq_info
struct rte_eth_txq_info
new functions:
rte_eth_rx_queue_info_get
rte_eth_tx_queue_info_get
into rte_etdev API.
Left extra free space in the queue info structures,
so extra fields could be added later without ABI breakage.
Add new fields:
rx_desc_lim
tx_desc_lim
into rte_eth_dev_info.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Bonding device implements independent management of RSS settings. It
stores its own copies of settings i.e. RETA, RSS hash function and RSS
key. It’s required to ensure consistency.
1) RSS hash function set for bonding device is maximal set of RSS hash
functions supported by all bonded devices. That mean, to have RSS support
for bonding, all slaves should be RSS-capable.
2) RSS key is propagated over the slaves "as is".
3) RETA for bonding is an internal table managed by bonding API, and is
used as a pattern to set up slaves. Its size is GCD of all RETA sizes, so
it can be easily used as a pattern providing expected behavior, even if
slaves RETA sizes are different.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Add separate functions to configure VMDQ and RSS.
Update dglort map and logic ports accordingly.
Reset MAC/VLAN filter after VMDQ config was changed.
Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
This patch adds a command to display DCB info in ports.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch enables DCB feature on Intel XL710/X710 NICs. It includes:
Receive queue classification based on traffic class
Round Robin ETS schedule (rx and tx)
Priority flow control
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
DPDK uses a structure to get or set a new hash key (see
eth_rte_rss_hash_conf). rss_hf field from this structure is used in
rss_hash_get_conf to retrieve the hash key and in rss_hash_update uses
it to verify the key exists before trying to update it.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
To support FVL PMD can select which RX and TX function should be used
according to the queue config.
Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Feature Add: Rx/Tx flow control support for the i40e
All the Rx/Tx LFC enable/disable operation is done by the F/W,
so PMD driver need to use the Set PHY Config AD command to trigger the PHY
to do the auto-negotiation, after the Tx/Rx pause ability is negotiated,
the F/W will help us to set the related LFC enable/disable registers.
PMD driver also need to configure the related registers to control
how often to send the pause frame and what the value in the pause frame.
Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Boulder Rapid is Intel new NIC within fm10k family.
This patch make DPDK driver support this new NIC.
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
This patch enables fm10k TSO feature for both non-tunneling packet
and tunneling packet.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
Enable rx interrupt support on e1000 physical and emulated device.
Implement rxq interrupt related functions in eth_dev_ops structure.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Implement the new CLIs for fdir mac vlan and tunnel modes, including
flow_director_filter and flow_director_mask. Set the mask of fdir.
Add, delete or update the entities of filter.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch implements the VF RSS reta/hash query and update function
on 10G NICs. But the update function is only provided for x550. Because
the other NICs don't have the separate registers for VF, we don't want
to let a VF NIC change the shared RSS reta/hash registers. It may cause
PF and other VF NICs' behavior change without being noticed.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Comparing with the older NICs, x550's RSS redirection table is enlarged to 512
entries. As the original code is for the NICs which have a 128 entries RSS table,
it means only part of the RSS table is set on x550. So, RSS cannot work as
expected on x550, it doesn't redirect the packets evenly.
This patch configs the entries beyond 128 on x550 to let RSS work well, and also
update the query and update functions to support 512 entries.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Fixed issue where the flag PKT_RX_IEEE1588_PTP was not being set
in Intel I210 NIC, as EtherType in RX descriptor is in bits 8:10 of
Packet Type and not in the default bits 0:2.
Fixes known issue "IEEE1588 support possibly not working
with an Intel Ethernet Controller I210 NIC"
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch enables igb TSO feature, the feature works on both PF and VF.
The TCP segmentation offload needs to write the offload related information
into the advanced context descriptors, which is similar to checksum offload.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This is a useful default for simple applications where the assignment
of lcores to CPUs doesn't matter. It's also useful for more complex
applications that automatically assign tasks to cores based on the
NUMA topology.
Signed-off-by: Rich Lane <rich.lane@bigswitch.com>
Fix a number of RST issues in the testpmd user guide and
refactored the structure to:
* Remove redundant roadmap section.
* Merge Overview section into Introduction.
* Move "set fwd" to the start of its section.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Fix a pdf doc build warning where a link wasn't recognised:
doc/guides/contributing/documentation.rst::
WARNING: unusable reference target found: inkscape.org
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
This patch refers to the ABI change proposed for
librte_cfgfile(rte_cfgfile.h). In order to allow
for longer names and values, the values of macro
CFG_NAME_LEN and CFG_VAL_LEN is increased.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
'virtual' is a keyword and can't be used if the code is to compile with
C++ compilers.
If rte_devargs.h was included in C++ code, compilation with clang++
failed with an error. g++ did not fail, but only because of a bug
that treats it as an anonymous struct with a decl-specifier which it
ignores.
This simply renames the member to 'virt'.
Reported-by: Ming Zhao <mzhao@luminatewireless.com>
Signed-off-by: Christoph Gysin <christoph.gysin@gmail.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
if input parameter vq is NULL, hw = vq->hw, causes a segmentation fault.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
For virtio-net pmd, the interrupt management thread must be created after
this driver has initialised so that iopl() has been properly called and
its effects are inherited by all eal children threads.
Before this change, changing link status on a virtio-net device would
trigger a segfault in the interrupt thread :
$ mkdir -p /mnt/huge
$ echo 256 > /proc/sys/vm/nr_hugepages
$ mount -t hugetlbfs none /mnt/huge
$ lspci |grep Ethernet
00:03.0 Ethernet controller: Red Hat, Inc Virtio network device
$ modprobe uio
$ insmod ./x86_64-native-linuxapp-gcc/kmod/igb_uio.ko
$ echo 0000:00:03.0 > /sys/bus/pci/devices/0000\:00\:03.0/driver/unbind
$ echo 1af4 1000 > /sys/bus/pci/drivers/igb_uio/new_id
$ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x6 -n 3 -w 0000:00:03.0 -- -i --txqflags=0xf01 --total-num-mbufs 2048
[snip]
EAL: PCI device 0000:00:03.0 on NUMA socket -1
EAL: probe driver: 1af4:1000 rte_virtio_pmd
Interactive-mode selected
Configuring Port 0 (socket 0)
Port 0: DE:AD:DE:01:02:03
Checking link statuses...
Port 0 Link Up - speed 10000 Mbps - full-duplex
Done
testpmd>
Then, from qemu monitor:
(qemu) set_link virtio-net-pci.0 off
testpmd> Segmentation fault
Fixes: 565b85dcd9 ("eal: set iopl only when needed")
Reported-by: Stephen Hemminger <shemming@brocade.com>
Suggested-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Increase max_rx_pktlen to accommodate jumbo frame size. Perform sanity
checks and enable jumbo mode in rx queue setup. Set link mtu based on
max_rx_pktlen.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Update sge initialization with respect to free-list manager configuration
and ingress arbiter. Also update refill logic to refill mbufs only after
a certain threshold for rx. Optimize tx packet prefetch.
Approx. 3 MPPS improvement seen in forwarding performance after the
optimization.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
This patch relates to ABI change proposed for librte_port. Macros to
access the packet meta-data stored within the packet buffer has been
adjusted to cover the packet mbuf structure.
The LIBABIVER number is incremented.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch relates to ABI change proposed for librte_table
(lpm table). A new parameter to hold the table name has
been added to the LPM table parameter structures
rte_table_lpm_params and rte_table_lpm_ipv6_params.
The LIBABIVER number is incremented. The release notes
is updated and the deprecation announcement is removed.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Old flow director API have been replaced by rte_eth_dev_filter_ctrl
since release 2.0. And no driver in current code support these functions.
All the removed functions are listed below:
- rte_eth_dev_fdir_add_perfect_filter;
- rte_eth_dev_fdir_add_signature_filter;
- rte_eth_dev_fdir_get_infos;
- rte_eth_dev_fdir_remove_perfect_filter;
- rte_eth_dev_fdir_remove_signature_filter;
- rte_eth_dev_fdir_set_masks;
- rte_eth_dev_fdir_update_perfect_filter;
- rte_eth_dev_fdir_update_signature_filter;
The library version was already incremented in a previous patch.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
[Thomas: fix mlx4 and update release notes]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Update the DPDK 2.2 release notes with recent fixes:
9db649 eal/linux: fix epoll timeout
d49e0f hash: fix memory allocation of cuckoo key table
7fcd13 ixgbe: fix X550 DCB
5e73f4 ixgbe: remove burst size restriction of vector Rx
7e01e3 i40e: fix base driver allocation when not using first numa node
d53364 vhost: fix qemu shutdown
The order of sections (and inside) is inspired from MAINTAINERS file.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch originates from the patch:
"Patch for Qemu wrapper for US-VHost to ensure Qemu process ends when
VM is shutdown", http://dpdk.org/ml/archives/dev/2014-June/003606.html
Also update the vhost sample guide doc.
Signed-off-by: Claire Murphy <claire.k.murphy@intel.com>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
This commit removes the dev-index, so update the doc for this change:
Fixes: 17b8320a3e ("vhost: remove index parameter")
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
From version 2.2 of DPDK onwards patchsets should include
updates to the Release Notes for additions, fixes and
changes.
Add guideline on what to update in the Release Notes to the
Documentation Contribution guidelines.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
The two examples of ethertype_filter in testpmd documentation
were missing the mac address field, so the example was incorrect.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The function rte_jhash2() was renamed rte_jhash_32b and
macros RTE_HASH_KEY_LENGTH_MAX and RTE_HASH_BUCKET_ENTRIES_MAX
were tagged as deprecated, so they can be removed in 2.2.
RTE_HASH_KEY_LENGTH is replaced in unit tests by an internal macro
for the memory allocation of all keys used.
The library version number is incremented.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
These were deprecated in 2.0 so remove them from 2.2.
The library version is incremented.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
These functions were tagged as deprecated in 2.0 so they can be
removed in 2.2.
The library version is incremented.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Helin Zhang <helin.zhang@intel.com>
[Thomas: update doc and version]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The functions and structures are moved to app/test in order to keep
existing unit tests. Some minor changes were done in these functions
because of library scope restrictions.
An enum is also copied in two other applications to keep existing code.
The library version is incremented.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The library version is incremented.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The malloc library is now part of the EAL.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The function rte_eal_pci_close_one() was renamed rte_eal_pci_detach().
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: David Marchand <david.marchand@6wind.com>
The extended SCTP flow entries are now part of the standard API.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The extended unified packet type is now part of the standard ABI.
As mbuf struct is changed, the mbuf library version is incremented.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The Rx interrupt feature is now part of the standard ABI.
Because of changes in rte_intr_handle and struct rte_eth_conf,
the eal and ethdev library versions are incremented.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
[Thomas: merged with new release notes style]
Acked-by: John McNamara <john.mcnamara@intel.com>
Added release notes for the DPDK R2.1 release.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
[Thomas: small fixes]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
