The dedicated Rearm Queue is needed to fire the work requests to
the Clock Queue in realtime. The Clock Queue should never stop,
otherwise the clock synchronization might be broken and packet
send scheduling would fail. The Rearm Queue uses cross channel
SEND_EN/WAIT operations to provides the requests to the
Clock Queue in robust way.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This patch creates the special completion queue providing
reference completions to schedule packet send from
other transmitting queues.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This is preparation step before moving the Tx queue creation
to the DevX approach. Some features require the shared UAR
for Tx queues and scheduling completion queues, the patch
manages the shared UAR.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The master and representors might be created over the multiport
Infiniband devices and the UAR resource allocated for sibling
ports might belong to the same underlying Infiniband device.
Hardware requires the write access to the UAR must be performed
as atomic 64-bit write, on 32-bit systems this is two sequential
writes, protected by lock. Due to possibility to share the same
UAR between sibling devices the locks must be moved to shared
context.
Fixes: f048f3d479 ("net/mlx5: switch to the shared IB device context")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This patch introduces the new devargs:
tx_pp - enables accurate packet send scheduling on mbuf timestamps
in the PMD. On the device start if "rte_dynflag_timestamp"
dynamic flag is registered and this devarg non-zero value is
specified, the driver initializes all necessary internal
infrastructure to provide packet scheduling. The parameter
value specifies scheduling granularity in nanoseconds.
tx_skew - the parameter adjusts the send packet scheduling on
timestamps and represents the average delay between beginning
of the transmitting descriptor processing by the hardware and
appearance of actual packet data on the wire. The value should
be provided in nanoseconds and is valid only if tx_pp parameter
is specified. The default value is zero.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
As tx mbuf is not set for some advanced descriptors, if there is no
mbuf checking before rte_pktmbuf_free_seg() function be called on
the process of tx done clean up, that will cause a segfault. So add
a NULL pointer check to fix it.
Bugzilla ID: 501
Fixes: 8d907d2b79 ("net/igb: free consumed Tx buffers on demand")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
When the configure pattern involve GTPU inner l3 and l4, even the
configure input set only l3 but not l4, the different l4 protocol
header should also be configured for the different l4 protocol.
Fixes: 215a247b5f ("net/iavf: refactor hash flow")
Fixes: 642f201950 ("net/iavf: support RSS for IPv4 IPv6 mix of GTP")
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When the configure pattern involve GTPU inner l3 and l4, even the
configure input set only l3 but not l4, the different l4 protocol
header should also be configured for the different l4 protocol.
Fixes: 0b952714e9 ("net/ice: refactor PF hash flow")
Fixes: de32fa2ba2 ("net/ice: support RSS for IPv6 prefix")
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Some protocol don't support symmetric hash, need to handle these cases.
When set an invalid symmetric hash rule, just return failed.
Fixes: 4eafe71ee9 ("net/ice: fix RSS type")
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The rte_eth_dev_set_vlan_offload function will check vlan rx offload
capability, the i350/i210/i211 nics have vlan extend feature but
DEV_RX_OFFLOAD_VLAN_EXTEND is not set into the capability, that will
cause setting fail. So need to add this capability in
igb_get_rx_port_offloads_capa function.
Fixes: ef990fb56e ("net/e1000: convert to new Rx offloads API")
Cc: stable@dpdk.org
Signed-off-by: Zhihong Peng <zhihongx.peng@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
The rte_eth_dev_set_vlan_offload function will check vlan rx offload
capability, the i40e vf has vlan filter feature but
DEV_RX_OFFLOAD_VLAN_FILTER is not set into the capability, that will
cause setting fail. So need to add this capability in
i40e_vf_representor_dev_infos_get function.
Fixes: e0cb96204b ("net/i40e: add support for representor ports")
Cc: stable@dpdk.org
Signed-off-by: Zhihong Peng <zhihongx.peng@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
DEV_RX_OFFLOAD_TIMESTAMP is per port, so the internal implementation
shall enable it on per port basis only.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This experimental API is no longer required as the same
purpose can be solved with standard DEV_RX_OFFLOAD_TIMESTAMP
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
A dpdk bonding 802.3ad network as follows:
+----------+ +-----------+
|dpdk lacp |bond1.1 <------> bond2.1|switch lacp|
| |bond1.2 <------> bond2.2| |
+----------+ +-----------+
If a fiber optic go wrong about single pass during normal running like
this:
bond1.2 -----> bond2.2 ok
bond1.2 <--x-- bond2.2 error: bond1.2 receive no LACPDU Some packets
from switch to dpdk will choose bond2.2
and lost.
DPDK lacp state machine will transits to the expired state if no LACPDU
is received before the current_while_timer expires. But if no LACPDU is
received before the current_while_timer expires again, DPDK lacp state
machine has no change. Bond2.2 can not change to inactive depend on the
received LACPDU.
According to IEEE 802.3ad, if no lacpdu is received before the
current_while_timer expires again, the state machine should transits
from expired to defaulted. Bond2.2 will change to inactive depend on the
LACPDU with defaulted state.
This patch adds a state machine change from expired to defaulted when no
lacpdu is received before the current_while_timer expires again
according to IEEE 802.3ad:
If no LACPDU is received before the current_while timer expires again,
the state machine transits to the DEFAULTED state. The record Default
function overwrites the current operational parameters for the Partner
with administratively configured values. This allows configuration of
aggregations and individual links when no protocol partner is present,
while still permitting an active partner to override default settings.
The update_Default_Selected function sets the Selected variable FALSE
if the Link Aggregation Group has changed. Since all operational
parameters are now set to locally administered values there can be no
disagreement as to the Link Aggregation Group, so the Matched variable
is set TRUE.
The relevant description is in the chapter 43.4.12 of the link below:
https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=850426
Signed-off-by: Weifeng Li <liweifeng96@126.com>
Acked-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
The function valid_bonded_port_id() has already contains function
rte_eth_dev_is_valid_port(), so delete redundant check.
Fixes: 588ae95e79 ("net/bonding: fix port ID check")
Cc: stable@dpdk.org
Signed-off-by: Dongyang Pan <197020236@qq.com>
Reviewed-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Added support for exact match templates
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
The default egress rule should include buffer descriptor action
record only if the VF representor is enabled.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The protocol header are implicitly matched based on the proto
field data. For instance, if ether type is set as 0x800 in the
ether header then ipv4 protocol header is assumed to be present
for template matching even if ipv4 header is not present in the
given flow pattern.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
OVS-DPDK is accumulating the flow counters that are returned as part of
the flow_query API and it is being issued at least 3 times every second.
So there is no need to accumulate the counts internally in the driver.
Fixes: 306c2d28e2 ("net/bnxt: support count action in flow query")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Removed the check to enable default flows only when VF representor
are enabled. It should be enabled all the time in truflow mode.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Initialize table scope resource manager parameter.
Clear out rm_is_allocated parms before calling as base_index was added
and used incorrectly in this instance.
Signed-off-by: Farah Smith <farah.smith@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support for new resource manager to manage CFA resources.
TCAM is split into high and low regions now and CFA resource types
are being updated accordingly.
Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
mac_ctrl_frame_fwd assignment is missing, so
setting mac_ctrl_frame_fwd should be added in
ixgbe_flow_ctrl_get().
The patch fixes the issue.
Fixes: 56ea46a997 ("ethdev: retrieve flow control configuration")
Cc: stable@dpdk.org
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Bo Chen <box.c.chen@intel.com>
mac_ctrl_frame_fwd shouldn't be cleared when port stop,
otherwise it will be inconsistent with the actual status.
This patch fixes the issue.
Fixes: a524f550da ("net/ixgbe: fix flow control mode setting")
Cc: stable@dpdk.org
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The i40e_filter_pctype TCP_SYN_NO_ACK, UNICAST_IPV4_UDP and
MULTICAST_IPV4_UDP for x722 were missing when translating RSS type to
i40e_filter_pctype. This patch fixes it.
Fixes: da7018ec29 ("net/i40e: fix queue region in RSS flow")
Cc: stable@dpdk.org
Signed-off-by: Shougang Wang <shougangx.wang@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
This patch fixes the fdir cannot receive rx writeback packet issue.
The root cause is FDIR interrupt is not correctly enabled.
Beside this, to make sure fdir programming works fine when the port
is stopped, move the fdir interrupt configure from start/stop to
setup/teardown.
Fixes: cfd662d22e ("net/i40e: fix interrupt throttling setting in PF")
Cc: stable@dpdk.org
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Because of incomplete protocol header fields, GTPU_INNER_IPV4_UDP
and GTPU_INNER_IPV4_TCP profile aren't included in inner ipv4 group.
This patch complements header fields for GTPU/GTPU_EH ipv4 rss config.
Besides, after configuring L4 port, GTPU and GTPU_EH packets don't do
hash for UDP/TCP/SCTP. This patch also enables L4 hash for GTPU and GTPU
extension packets.
Fixes: d117de4600 ("net/ice: fix GTPU/PPPoE packets with no hash value")
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch optimized the fdir update rate for i40e PF, by tracking
whether the fdir rule being inserted into the guaranteed space
or shared space.
For the flows that are inserted to the guaranteed space, we assume
that the insertion will always succeed as the hardware only report
the "no enough space left" error. In this case, the software can
directly return success and no need to retrieve the result from
the hardware. When destroying a flow, we also assume the operation
will succeed as the software has checked the flow is indeed in
the hardware.
See the fdir programming status descriptor format in the datasheet
for more details.
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Reviewed-by: Jingjing Wu <jingjing.wu@intel.com>
This patch moves the fetching the device tpid to where it really needs,
rather than fetching it every time when entered the functions.
This is because this operation costs too many cycles and it is used only
when matching the ethernet header.
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Reviewed-by: Jingjing Wu <jingjing.wu@intel.com>
This patch allocated some memory pool for flow management to avoid
calling rte_zmalloc/rte_free every time.
This patch also improves the hash table operation. When adding/removing
a flow, the software will directly add/delete it from the hash table.
If any error occurs, it then roll back the operation it just done.
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Reviewed-by: Jingjing Wu <jingjing.wu@intel.com>
This patch introduces a FDIR flow management for guaranteed/shared
space tracking.
The fdir space is reported by the
i40e_hw_capabilities.fd_filters_guaranteed and fd_filters_best_effort.
The fdir space is managed by hardware and now is tracking in software.
The management algorithm is controlled by the GLQF_CTL.INVALPRIO.
Detailed implementation please check in the datasheet and the
description of struct i40e_fdir_info.fdir_invalprio.
This patch changes the global register GLQF_CTL. Therefore, when devarg
``support-multi-driver`` is set, the patch will not take effect to
avoid affecting the normal behavior of other i40e drivers, e.g., Linux
kernel driver.
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Reviewed-by: Jingjing Wu <jingjing.wu@intel.com>
-DALLOW_EXPERIMENTAL_API is always set for in-tree compilation.
See https://git.dpdk.org/dpdk/commit/?id=acec04c4b2f5
Fixes: 322bd6e702 ("net/bnxt: add port representor infrastructure")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The vlan mask fields were not setting the field bitmap causing
the template match process to ignore vlan fields. This change fixes
this bug.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support to search for identifiers and increase the reference
count for identifiers that are already allocated.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
This is a work around for the OVS setting offload rules that
are passing ipv4 tos mask as wild card and currently we do not
support.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Extended the ulp blob to extract data from the blob for a given
offset and length. The support is added only for little endian
format.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Need to remap the table scope ids allocated from HCAPI RM from high
to low value because for legacy devices a table scope is a set of base
addresses. The PCIe addresses must map to a PCIe PF which exists in
the hardware.
Signed-off-by: Farah Smith <farah.smith@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In tf_tbl_bulk_get, check if the indexes are in the range
of reserved tbl id instead of checking the allocation of each id.
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Implement shadow copy DB to hold reference count for
each ID in each identifier type. Implement identifier
search functionality.
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- The mapping of kernel pages for EEM sysmem operation takes
a significant amount of time. This change give the build option
to delay the sysmem mapping until the first write to EEM
Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
This patch fixes an issue that uninitialized has_reply_ack
is used for setting message flags.
Coverity issue: 360834
Fixes: c60208dd63 ("net/virtio-user: support reply-ack")
Signed-off-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Adrian Moreno <amorenoz@redhat.com>
The hash for ipv6 nat-t esp should be enable as ipv4 nat-t esp.
Fixes: dadf70e5c3 ("net/ice: enable additional input set for RSS hash")
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
If a VF request PF to allocate more number of queue pairs, the PF will
free the queue pairs which have been allocated and reset the VF. So,
VF should stop to work until all the process is done. This patch modify
the process of the request queue pairs. To improve efficiency and
eliminate code redundancy, the promiscuous ops were also updated.
Fixes: c48eb308ed ("net/i40e: support VF request more queues")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
When a RSS rule with only SRC/DST_ONLY or IPV6 prefix RSS type,
it should return failure. Besides, when a RSS rule with symmetric
hash function, the RSS type shouldn't carry with SRC/DST_ONLY.
This patch adds invalid RSS type check for the two cases.
Fixes: 0b952714e9 ("net/ice: refactor PF hash flow")
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When function ice_get_tun_type_for_recipe() get tunnel type,
for ICE_NON_TUN we need to include gtp-c and some gtp-u ptype
with no payload, as they do not have tunnel packet as paylod.
Fixes: 418d2563d1 ("net/ice/base: get tunnel type for recipe")
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Nannan Lu <nannan.lu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The current bonding PMD driver call mac_address_slaves_update function
to modify the MAC address of all slaves devices. In
mac_address_slaves_update function, the rte_eth_dev_default_mac_addr_set
API function is called to set the MAC address of the slave devices in
turn in the for loop statement.
When one port reset, calling rte_eth_dev_default_mac_addr_set API fails
because the firmware will not respond to the commands from the driver,
and exit the loop, so other slave devices cannot continue to update the
MAC address.
This patch fixes the issue by avoid exiting the loop when calling
rte_eth_dev_default_mac_addr_set fails.
Fixes: 2efb58cbab ("bond: new link bonding library")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Xuan Li <lixuan47@hisilicon.com>
Currently, based on a active-backup bond device, when the link status of
the primary port changes from up to down, one slave port changes to the
primary port, but the new primary port's MAC address cannot change to
the bond device's MAC address. And we can't continue receive packets
whose destination MAC addresses are the same as the bond devices's MAC
address.
The current bonding PMD driver call mac_address_slaves_update function
to modify the MAC address of all slaves devices: the primary port using
bond device's MAC address, and other slaves devices using the respective
MAC address. We found that one error using primary_port instead of
current_primary_port in mac_address_slaves_update function.
On the other hand, The current bonding PMD driver sets slave devices's
MAC address according to the variable named current_primary_port. The
variable named current_primary_port changes in the following scenario:
1. Add the slave devices to bond, the first slave port will be regarded
as the current_primary_port. If changing the order of adding the
slave devices, the value of the variable named current_primary_port
will be different.
2. The upper application specifies primary_port via calling the
rte_eth_bond_primary_set API function.
3. Delete the primary slave device.
4. The link status of the primary port changes from up to down.
We have tested the above 4 cases and found that there are problems that
the new primary port's MAC address didn't change to the bond device's
MAC address when running case 3 and 4. When current_primary_port
changes, the new primary port's MAC address should change at the same
time. We also need to call mac_address_slaves_update function to update
MAC addresses in case
3 and 4.
Bugzilla ID: 256
Fixes: 2efb58cbab ("bond: new link bonding library")
Cc: stable@dpdk.org
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
When TRUFLOW is not enabled ulp_ctx is not allocated.
In non-vector Tx datapath we are accessing this invalid pointer
resulting in a segfault. Check if TRUFLOW is enabled before
accessing ulp_ctx to avoid this.
Fixes: 1e46b39626 ("net/bnxt: fill cfa action in Tx descriptor")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Add a missing available check and fix the wrong address passed
to munmap on init failure.
Fixes: dd6590fe2f ("af_packet: fix possible memory leak")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add missing code to free memory when the device initialization fails.
Fixes: ccd37d341e ("net/af_packet: remove queue number limitation")
Fixes: 5f19dee604 ("drivers/net: do not use private ethdev data")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Zero is a valid fd. It will fail to check the fd if the fd is zero.
Fixes: 527740ccfa ("af_packet: fix some leaks")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Because the return value of rte_vdev_init() has multiple non-zero
values, when rte_vdev_init() return non-zero in the
rte_eth_bond_create() function, it should return the actual error code
rather than -ENOMEM.
Fixes: 68451eb669 ("net/bonding: call through EAL on create/free")
Cc: stable@dpdk.org
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
According to the definition of RSS types of action attributes from
testpmd, the driver will not disable RSS but instead requests the
unspecified "best-effort" settings when upper application call
rte_flow_create API function to create flow using empty RSS types.
As a result, here use the default RSS types when RSS types is empty.
Fixes: c37ca66f2b ("net/hns3: support RSS")
Cc: stable@dpdk.org
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
CRC is the end of frame, which occupies 4 bytes. Keeping CRC is a
feature of MAC, which will not strip CRC field when receiving frames.
The feature can be enabled using DEV_RX_OFFLOAD_KEEP_CRC offload by
upper level application. And the feature is only supported for hns3 PF
PMD driver, not supported for hns3 VF PMD driver
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
The 200G device has a new device id 0xA228, so adds this device id
to pci table for pci driver can probe it. Similar to the network port
with other speed, the hns3 PMD driver gets 200G speed information
from firmware, and passes them to DPDK framework.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
The hns3 network engine is built-in multiple SoCs, such as kunpeng 920,
kunpeng 930, etc. The PCI revision id is 0x21 in kunpeng 920, and the
PCI revision id is 0x30 in kunpeng 930.
Copper media type is supported for hns3 PF device in kunpeng 930 and
later SoCs. The configuration operation for PHY is implemented by
firmware.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Previous logic in removing RSS for GTPU was added in incorrect lines.
The adjustment in this patch will correct the code order so that RSS
for GTPU can be removed successfully.
We also delete the redundant print statement and cleanup the coding
style in this patch.
Fixes: bed9bb3139 ("net/ice/base: fix GTP-U inner RSS IPv4 IPv6 co-exist")
Cc: stable@dpdk.org
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch moves otx2_sec_session structure to otx2_security.h
to make it common for inline and lookaside protocol modes of
rte_security
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch does following things:
1. Added a wrapper function bnxt_clear_one_vnic_filter()
for destroying the filters in hw. This will avoid duplicate
code in many places.
2. When flow create fails due to an already existing mark id
for the new flow id created, fixed to destroy the hw
filter created.
3. Re-arranged code to move a log and list update to right place.
Fixes: 9db66782bd ("net/bnxt: fix supporting zero mark ID with RSS action")
Fixes: 5ef3b79fdf ("net/bnxt: support flow filter ops")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
If set_em_filter/set_ntuple_filter cmds fails for some reason,
driver is not filling the "rte_flow_error" string buffer.
Same is the case when flow create fails due to an already
existing mark id for the new flow id created.
This leads to a crash in testpmd while trying to print the
error message.
Fixes: 5c1171c972 ("net/bnxt: refactor filter/flow")
Fixes: 9db66782bd ("net/bnxt: fix supporting zero mark ID with RSS action")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
During probe, driver issues HWRM_CFA_ADV_FLOW_MGNT_QCAPS command.
But it is not using the command response anywhere which makes the
fw call redundant.
Remove the unnecessary HWRM_CFA_ADV_FLOW_MGNT_QCAPS call to fw.
Remove the redundant flow_flags in bnxt struct.
Fixes: afef822b2e ("net/bnxt: support creating SMAC and inner DMAC filters")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
"enum bnxt_hw_context" is defined in the header file, but is not
used anywhere.
Fixes: 9738793f28 ("net/bnxt: add VNIC functions and structs")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
VFs are not privileged to issue HWRM_PORT_LED_QCFG/CFG.
There is no need to allocate "bp->leds" memory.
Fixes: 205b742952 ("net/bnxt: fix allocation of LED config info")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
When two host is connected directly without any devices like switch,
rx_machine_update would receiving partner LACP negotiation packets,
and partner's port mac is filled with zeros in this packet, which is
different with internal's mode4 mac. So in this situation, it would
never go rx_machine branch and then execute mac swap for negotiation!
Thus bond mode 4 will negotiation failed.
Fixes: 56cbc08173 ("net/bonding: fix LACP negotiation")
Cc: stable@dpdk.org
Signed-off-by: Yicai Lu <luyicai@huawei.com>
Reviewed-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Using '__rte_internal' tag in 'rte_ethdev_driver.h' causing build error
for applications and examples. Because they don't define
'ALLOW_INTERNAL_API' flag and '__rte_internal' causes the error.
This patch is preparation for future '__rte_internal' usage.
At first place, applications/examples should not include
'rte_ethdev_driver.h', this is happening because of PMD public header
files include 'rte_ethdev_driver.h' by mistake.
Updated PMD public header files to not include internal header files.
But for unit test application, 'app/test', enable accessing internal
APIs, since some unit tests need them.
Fixes: ffc905f3b8 ("ethdev: separate driver APIs")
Fixes: ec0dec44ec ("net/atlantic: enable MACsec configuration")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Prior to this fix the NFP PMD implementation of the .rss_hash_conf_get
callback did not propagate the current hardware state of rss_hf back up
to the caller. Users of the hash_conf_get callback would receive an
incorrect representation of what the RSS configuration currently is in
hardware.
Fixes: 934e4c60fb ("nfp: add RSS")
Cc: stable@dpdk.org
Signed-off-by: Heinrich Kuhn <heinrich.kuhn@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Add named constants for deprecated QinQ TPIDs.
Update drivers which have already been using existing
TPID named constants from librte_net to use the
new named constants rather than magic numbers.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
RSS for IPv6 prefix fields are supported in this patch, so that we
can use prefixes instead of full IPv6 address for RSS. These prefixes
include the first 32, 48, 64 bits of both SRC and DST IPv6 address.
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Following commit updated the error codes:
commit 2ae8e130cf ("net/hinic/base: modify returned error values")
In that commit 'ETIME' errors are not used because it is not supported
by FreeBSD, instead in this patch converting relevant error codes to
'ETIMEDOUT'.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently, there is a potential problem that calling the API function
rte_eth_dev_set_vlan_offload to start VLAN hardware offloads which the
driver does not support. If the PMD driver does not support certain VLAN
hardware offloads and does not check for it, the hardware setting will
not change, but the VLAN offloads in dev->data->dev_conf.rxmode.offloads
will be turned on.
It is supposed to check the hardware capabilities to decide whether the
relative callback needs to be called just like the behavior in the API
function named rte_eth_dev_configure. And it is also needed to cleanup
duplicated checks which are done in some PMDs. Also, note that it is
behaviour change for some PMDs which simply ignore (with error/warning
log message) unsupported VLAN offloads, but now it will fail.
Fixes: a4996bd89c ("ethdev: new Rx/Tx offloads API")
Fixes: 0ebce6129b ("net/dpaa2: support new ethdev offload APIs")
Fixes: f9416bbafd ("net/enic: remove VLAN filter handler")
Fixes: 4f7d9e383e ("fm10k: update vlan offload features")
Fixes: fdba3bf15c ("net/hinic: add VLAN filter and offload")
Fixes: b96fb2f0d2 ("net/i40e: handle QinQ strip")
Fixes: d4a27a3b09 ("nfp: add basic features")
Fixes: 56139e85ab ("net/octeontx: support VLAN filter offload")
Fixes: ba1b3b081e ("net/octeontx2: support VLAN offloads")
Fixes: d87246a437 ("net/qede: enable and disable VLAN filtering")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
Acked-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Avoids recalculation of DPAA2_IOVA_TO_VADDR, since this is somewhat
costly function on no-IOMMU setups.
Brings about 0.5 Gbps improvement at 19 Gbps speeds on LX2160 with 512b
packets.
Signed-off-by: Roman Kapl <rka@sysgo.com>
Reviewed-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The following commit introduced several new actions. Make the dump
function to print those actions.
commit 6faf81f1d2 ("net/enic: update flow manager API")
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Flow manager API includes push/pop actions, so support corresponding
DPDK flow actions.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
This adds the ConnectX-6 Lx device id to the list of supported
Mellanox devices that run the MLX5 PMD.
The device is still in development stage.
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
Acked-by: Raslan Darawsheh <rasland@mellanox.com>
RSS for GTP with outer & inner ipv4 & ipv6 combination are supported
in this patch, so that we can process RSS based on inner 5 tuples or
3 tuples of all the cases below of GTP packets:
1. ipv4 (outer) + ipv4 (inner)
2. ipv4 (outer) + ipv6 (inner)
3. ipv6 (outer) + ipv4 (inner)
4. ipv6 (outer) + ipv6 (inner)
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
RSS for GTP with outer & inner ipv4 & ipv6 combination are supported
in this patch, so that we can process RSS based on inner 5 tuples or
3 tuples of all the cases below of GTP packets:
1. ipv4 (outer) + ipv4 (inner)
2. ipv4 (outer) + ipv6 (inner)
3. ipv6 (outer) + ipv4 (inner)
4. ipv6 (outer) + ipv6 (inner)
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When adding a RSS rule with pattern MAC_PPPOE_IPV4_UDP and input
set SRC/DST IPV4, because of incomplete protocol header fields,
the rule can't do hash with inner src/dst ipv4. PPPOE_IPV4_TCP/SCTP
and PPPOE_IPV6_UDP/TCP/SCTP also have similar issues. This patch
complements protocol header fields for PPPOE data packets.
Fixes: 0b952714e9 ("net/ice: refactor PF hash flow")
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Writing to read-only fields returns a non-OK Return Status
for shadow RAM write command for X550.
This information was previously discarded.
Signed-off-by: Stanislaw Grzeszczak <stanislaw.a.grzeszczak@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
The codes has been exposed correctly, so remove pre-processor tags.
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
We are seeing interoperability issues with switches when 2.5G and 5G
in x550 are advertised by default, so default to off.
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Write FDIRIP6M register to allow flow director filter
to set ipv6 rules without setting ipv6 source/destination address.
Signed-off-by: Piotr Skajewski <piotrx.skajewski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
On ESXi OS, when user disables auto negotiation, the following log
appears: "(unsupported) Flow control autoneg is disabled".
It is true that auto negotiation is disabled but it is
not necessarily true that it is not supported.
Signed-off-by: Jakub Chylkowski <jakubx.chylkowski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
While sending request using ixgbe_hic_unlocked() the data field in
buffer struct is not used. It is set when the struct is overwritten by
FW to deliver the response. To not pass random data to FW the whole
structure should be zeroed before use.
Signed-off-by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Signed-off-by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
The function ixgbe_device_supports_autoneg_fc is checking whether
a particular device and medium configuration is supporting
Flow Control Autonegotiation. In case of non-support, the message
is always logged which is confusing.
The fix is removing unnecessary log entry.
Signed-off-by: Zalfresso-Jundzillo <marekx.zalfresso-jundzillo@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Add typecast for type mismatch.
Signed-off-by: Jakub Chylkowski <jakubx.chylkowski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
This patch is for restarting auto negotiation on PHY.
Signed-off-by: Jakub Chylkowski <jakubx.chylkowski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
The retry variable was being incremented before it was evaluated by the
subsequent conditional against the maximum retries to figure out which
message to print. So we'll move the increment op to the end.
Signed-off-by: Jeb Cramer <jeb.j.cramer@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Remove unnecessary extra whitespace on all function comments, replacing
' * ' with ' * '.
This was done automatically via sed using the following transformation:
sed 's/^ \* / * /'
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Several functions in the driver code have a weird function comment
formatting which uses two spaces instead of only one space for the main
function body.
This formatting will be mechanically fixed by sed in a future patch, but
doing so leads to some spelling warnings on that patch. Cleanup the
spelling mistakes that will be detected first. This way, it is easier to
verify the mechanical transformation done by sed in the following patch.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
In some corner cases the functions ixgbe_clear_rar_generic and
ixgbe_clear_vmdq_generic may call one another leading to infinite
recursion.
When ixgbe_clear_vmdq_generic is called with IXGBE_CLEAR_VMDQ_ALL
flag, it's going to clear MPSAR registers, and proceed to call
ixgbe_clear_rar_generic, which in turn will clear the RAR registers,
and recursively call back ixgbe_clear_vmdq_generic. Normally, the
latter would detect that MPSAR registers have already been cleared
and terminate the recursion.
However, when PCIe link is down, and before the driver has had the
opportunity to shut itself down, all register reads return 0xFFFFFFFF,
and all register writes fail silently. In such case, because
ixgbe_clear_vmdq_generic blindly assumes that clearing MPSAR registers
succeeded, it's going to always call ixgbe_clear_rar_generic, which
in turn will always call back ixgbe_clear_vmdq_generic, creating
infinite recursion.
This patch re-reads MPSAR register values after they had been cleared.
In case of PCIe link failure, the values read will be non-zero, which
will terminate the recursion. On the other hand, under normal
circumstances the value read from MPSAR registers is going to be equal
to the value previously written, so this patch is expected not to cause
any regressions.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Robert Konklewski <robertx.konklewski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
With the NVM image for x550em XFI will not report
the auto-negotiation feature correctly. The auto-negotiation
should be "No" for supports and advertised items.
At the same time update speed makes it support 1G and 10G.
Fixes: 833df43399 ("net/ixgbe/base: add SGMII link for X550")
Cc: stable@dpdk.org
Signed-off-by: Piotr Skajewski <piotrx.skajewski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
For the "Apply Update" command the firmware does not
given an response. For this command, success should
be return.
Signed-off-by: Mateusz Kowalski <mateusz.kowalski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Host interface Shadow RAM Read (0x31) command response
buffer length should be stored in two bytes, instead of one byte.
This patch fixes it.
Fixes: e6102361b1 ("net/ixgbe/base: use 2 bytes for flash read command")
Cc: stable@dpdk.org
Signed-off-by: Mateusz Kowalski <mateusz.kowalski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Add support for .get_reg eth_dev ops which will be used to collect the
firmware debug data.
PMD on detecting on some HW errors will collect the FW/HW Dump to a
buffer and then it will save it to a file implemented in
qede_save_fw_dump().
Dump file location and name:
Location: <RTE_SDK> or DPDK root
Name: qede_pmd_dump_mm-dd-yy_hh-mm-ss.bin
DPDK applications can initiate a debug data collection by invoking DPDK
library’s rte_eth_dev_get_reg_info() API. This API invokes .get_reg()
interface in the PMD.
PMD implementation of .get_reg() collects the FW/HW Dump, saves it to
data field of rte_dev_reg_info and passes it to the application. It’s
the responsibility of the application to save the FW/HW Dump to a file.
We recommendation using the file name format used by qede_save_fw_dump().
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
The patch adds QEDE PMD ops and APIs to calculate the size and collect
the debug dump for various firmware components. The patch adds new files
qede_debug.[ch] that has all the firmware debug data collection
infrastructure changes.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
This patch adds base driver APIs required for debug data collection.
It adds support for dumping internal lookup tables(ilt), reading nvram
image, register definitions.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
This patch rearranges some of the base driver structures which will be
also used by debug data collection (DDC) implementation. It adds a new
file ecore_hsi_func_common.h with Physical, Virtual memory descriptors.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
When external buffer is used, driver should detach it if it doesn't make
it successfully to the queue.
Signed-off-by: Long Li <longli@microsoft.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
When rte_pktmbuf_attach_extbuf() is used, the driver should not decrease
the reference count in its callback function hn_rx_buf_free_cb, because
the reference count is already decreased by rte_pktmbuf. Doing it twice
may result in underflow and driver may never send an ack packet over
vmbus to host.
Also declares rxbuf_outstanding as atomic, because this value is shared
among all receive queues.
Fixes: 4e9c73e96e ("net/netvsc: add Hyper-V network device")
Cc: stable@dpdk.org
Signed-off-by: Long Li <longli@microsoft.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Caught by code review, rte_eth_dev_socket_id() returns -1 on error.
The code should behave the same, but still, do not use LCORE_ID_ANY for
something that is not a lcore id.
Fixes: c15c589734 ("net/bonding: avoid allocating mempool on unknown socket")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Chas Williams <chas3@att.com>
Instead of using hardcoded values for the byte/pkt value shifts/masks
to read from the HW counters, use the shift/mask values from the device
template params
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Inorder to offload flows on the vfrep device, it must be
populated with rte_flow_ops.
This patch enables the same.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Fix to use the vf's vnic port for ingress flows whose
port action is a vf rep port.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added support for set transport port source and destination
rewrite action items. This allows changing the tcp or udp
source/destination ports for a given flow.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added support for set ipv4 address action items. It allows the source
or destination ip address to be changed for a given flow.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added support for conditional mapper result opcodes. The conditional
opcodes allows to set the action details in hardware based on the
actions configured for the flow. This allows aggregation of multiple
templates.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added port configuration changes to support full offload
rules when VF representor ports are used. The direction of
the flow is determined using the configured direction and the
configured match and action ports of the flow create.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added support for the PF and VF port action items in the flow
create. During flow create the output port action can now be specified
as PF or VF port and those ports are parsed accordingly and converted
to vnic or vport as per the flow direction.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added number of vlan tags in the computed field list so conditional
table execution could be done based on number of vlan tags in the
flow create.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The outer ip protocol was not encapsulated in the right location
when ip header is sent by the application. The order of encapsulation
has to be reversed.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Removed the vnic and vport bitmaps from template matching. It
is assumed that these will be populated implicitly and based
on the direction the appropriate action property shall be used.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support for the vlan push and vlan pop actions
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The return value of some functions is explicitly ignored
in cases where scope id may not be valid for internal EM
entries.
Additional minor refactoring and cleanups
- Change log level for some log messages to DEBUG instead of ERR.
- Check data size conformity and log appropriate message.
Signed-off-by: Michael Wildt <michael.wildt@broadcom.com>
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Brought in the latest hsi_struct_def_dpdk.h in order to get
the TF global cfg set/get HWRM cmds.
HWRM API is now updated to version 1.10.1.48
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support for index opcode constant so that
parif configuration could be constant value.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added validations to the ulp parser to validate the dpdk port id
and phy port index during the flow creation.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support for the vlan headers in the matching of the flow
patterns.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The vxlan encap and decap flows need to allocate the source
record property and populate the action fields during the
flow parsing.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Add bnxt vector PMD support using NEON SIMD instructions.
Also update the 20.08 release notes with this information.
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
The bnxt vector mode receive handler does not support the rte_flow
'mark' action. Since we cannot know in advance whether this action
will be required, add support for dynamically switching from vector
to non-vector receive when the first flow create request with a
mark action is processed.
Fixes: 94eb699bc8 ("net/bnxt: support flow mark action")
Cc: stable@dpdk.org
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support for raw flow, which can be used for any
protocol rules.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
TC distribution size is set with dist_queues or
nb_rx_queues % dist_queues in order of TC priority.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
1) dpni_set_rx_hash_dist and dpni_set_rx_fs_dist used for TC
configuration instead of dpni_set_rx_tc_dist. Otherwise,
re-configuration of default TC of QoS fails.
2) Default miss action is to drop. "export
DPAA2_FLOW_CONTROL_MISS_FLOW=flow_id" is used receive the missed
packets from flow with flow ID specified.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
