Ethdev Rx offloads API has changed since:
commit ce17eddefc20 ("ethdev: introduce Rx queue offloads API")
This commit support the new Rx offloads API.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Ethdev Tx offloads API has changed since:
commit cba7f53b717d ("ethdev: introduce Tx queue offloads API")
This commit support the new Tx offloads API.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Counter_set is a counter used for flows when its support is available.
Renaming it to flow counter.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Move device configuration and features capabilities to its own structure.
This structure is filled by mlx5_pci_probe(), outside of this function
it should be treated as *read only*.
This configuration struct will be used for the Tx/Rx queue setup to
select the Tx/Rx queue parameters based on the user configuration and
device capabilities.
In addition it will be used by the burst selection function to decide
on the best pkt burst to be used.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Change the function prototype to return the function pointer of the
selected Tx/Rx burst function instead of assigning it directly to the
device context.
Such change will enable to use those select functions to query the burst
function that will be selected according to the device configuration.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Bit-fields in mlx5_rxq_data can be changed on the fly by a control plane -
e.g. rxq->mark. However, vectorized Rx uses a bit-field to mark pending
errors. Even if one bit is written, consequence is to write the whole
integer and this can cause a synchronization issue - two entities write to
a same block without locking. As the pending_err bit is entirely internal
use for the datapath, this can be replaced with a local variable.
Fixes: 6cb559d67b83 ("net/mlx5: add vectorized Rx/Tx burst for x86")
Fixes: 570acdb1da8a ("net/mlx5: add vectorized Rx/Tx burst for ARM")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Max number of Tx scatter-gather entries is a property of the device
and is queried at init. This value was not changed in a while and
most probably will not be changed in the future, Therefore and
in order to enhance Tx performance, the Tx max-sge value is hardcoded
in mlx4 PRM code.
This patch adds a verification that the above assumption still holds
and that the hardcoded value is still supported by the mlx4 hardware.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Add description of raw flow type mode for flow_director_filter
command in testpmd. Modify description of flow type parameter
for functions set_hash_global_config, set_hash_input_set and
set_fdir_input_set.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add possibility to load file with raw packet and set it as a
template for FDIR setup.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
When primary address mac is changed, the mac filters were not updated in
the VSI with the new mac addr and incoming packets with this destination
address are dropped by the hardware filters.
This patch removes the VSI mac filter for the previous mac address and
adds a new one for new mac address.
Fixes: e18e01e92c29 ("i40e: support default MAC address setting")
Cc: stable@dpdk.org
Signed-off-by: Laurent Hardy <laurent.hardy@6wind.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add a new Rx function using AVX2 instructions for higher
performance. For now, this functionality is limited to platforms
with Intel Xeon Scalable Processor(SP). The function to be used
is selected at runtime, not just at compile-time.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add a new Tx function using AVX2 instructions for higher
performance. For now, this functionality is limited to platforms
with Intel Xeon Scalable Processor(SP). The function to be used
is selected at runtime, not just at compile-time.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch mainly adds/removes comments for function parameters
that were missing or no longer needed.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch clears software resource bits in synchronization
register and updates host interface resource bit error case for
X540. It also fixes compile warnings of using GCC 7.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
With this patch, it uses 2 bytes of buffer reading, as required
for flash read command. It also adds definitions for LESM module.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch adds lockless read/write support for clause 22 PHY,
together with some enhancements for link speed and return value
handling.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Increase SECRX_RDY polling frequency and semaphore timeout which
fixes the FWSW.PT check in ixgbe_mng_present().
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add common functions for getting OEM product version, option
ROM version, and ETrack id.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Rename virtchnl_vf_resource's vf_offload_flags to vf_cap_flags.
The new name is more generic, so more than just offloading
capabilities can be added.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This fix prevents errors or warnings while accessing unaligned 32-bit
data words on non-x86 platforms during getting link info from firmware.
Fixes: e8228f1a16b7 ("net/i40e/base: report supported link modes")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Previous method for reading LLDP config was based on hard-coded offsets.
It happened to work, because of structured architecture of the NVM memory.
In the new approach, known as FLAT, we need to calculate the absolute
address, instead of using relative values. Needed defines for memory
location were added.
Fixes: 8db9e2a1b232 ("i40e: base driver")
CC: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
When using GCC 6.3.0 and EXTRA_CFLAGS=-Og, the compiler is not smart
enough to see that when you have an integrated VF that just one of the
if statemets has to be true so that ntu is always set. Fix the way that
the code is for integrated VFs so that the compiler won't complain.
Fixes: 9783eb15eb98 ("i40e/base: wrap the register definitions for PF and VF")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The FW has the ability to return a critical error on every AQ command.
So add the new return type as critical error to sync with firmware.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add new AQ command that help to inform software how advanced
rearrangement process is.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
New control bits were defined for flat NVM structure.
One for pointing which NVM bank is currently used and
one used as indicator of structure type.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This fix solves an issue occurring while calling i40e_led_set function
from the driver with "blink" parameter set as TRUE. This call resulted
in Activity LED blinking instead of Link LED, which may lead to errors
in physically identyfying the port, since Activity LED may be blinking
for different reasons aswell.
Fixes: 51b27bc5d898 ("i40e/base: update LED blinking")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch adds new I40E_NVMUPD_GET_AQ_EVENT state
to allow retrieval of AdminQ events as a result.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add preservation flags support on X722 devices for NVM update AdminQ
function wrapper. Add new parameter and handling to nvm update admin
queue function intended to allow nvmupdate tool to configure the
preservation flags in the AdminQ command.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
1. Cleanup logical in __i40e_read_nvm_word and reuse it in
i40e_read_nvm_word.
2. Change couple functions to static so we can remove uncessary function
declarations
3. Cleanup logical in i40e_validate_nvm_checksum.
4. Add more debug information in PF reset
5. correct comments
6. Minor code style fix.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
NVM lock is only required at below situation:
1. its X722 device or
2. API version >= 1.5
or may have issue at firmware downgrade.
Fixes: c5846a125b26 ("net/i40e/base: fix NVM access interfering")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add new Adminq command i40e_aqc_opc_set_dcb_parameters that
helps to get DCB parameters in data structure i40e_aqc_set_dcb_parameters.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Introduce a helper function which can convert the AdminQ link speed
definition into a virtchnl definition. This can then be used by host
driver implementations in order to safely convert to the interface
recognized by the virtual functions.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
