Adds the description of the cryptodev scheduler PMD overview,
limitations, build, instructions, modes, etc.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
To avoid confusion with distributor app, this commit
renames the flow-distributor sample app to server_node_efd,
since it shows how to use the EFD library and it is based
on a server/nodes model.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add two new commands "show port cap <port>" and "show
port cap all" to display what offload capabilities supported
in ports. It will not only display all the capabilities of
the port, but also the enabling condition for each capability
in the running time.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This enables ACL matches to return 0 where the distinction
from no-match case is not needed.
Signed-off-by: Michał Mirosław <michal.miroslaw@atendesoftware.pl>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add documentation about the driver and update
release notes.
Signed-off-by: Zbigniew Bodek <zbigniew.bodek@caviumnetworks.com>
Reviewed-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add two new feature flags:
* RTE_CRYPTODEV_FF_CPU_NEON
represents ARM NEON (TM) instructions
* RTE_CRYPTODEV_FF_CPU_ARM_CE
represents ARM crypto extensions
Add them to both cryptodev library, documentation and relevant
PMD driver for ARMv8.
Signed-off-by: Zbigniew Bodek <zbigniew.bodek@caviumnetworks.com>
When ZUC PMD was added, it was not added in the
Crypto Device Supported Functionality Matrices.
This commit adds a column in all the matrices, plus
the ZUC EEA3/EIA3 algorithms.
Fixes: cf7685d68f ("crypto/zuc: add driver for ZUC library")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Current Cryptodev AES-NI GCM PMD is implemented using Multi Buffer
Crypto library.This patch reimplement the device using ISA-L Crypto
library: https://github.com/01org/isa-l_crypto.
The migration entailed the following additional support for:
* GMAC algorithm.
* 256-bit cipher key.
* Session-less mode.
* Out-of place processing
* Scatter-gatter support for chained mbufs (only out-of place and
destination mbuf must be contiguous)
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
The code section was lacking indentation to be be correctly formatted.
Fixes: d61f70b4c9 ("crypto/libcrypto: add driver for OpenSSL library")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Release v0.44 of Intel(R) Multi-Buffer Crypto for IPsec library adds
support for AVX512 instructions. This patch enables the new AVX512
accelerated functions from the aesni_mb_pmd crypto poll mode driver.
This patch set requires that the aesni_mb_pmd is linked against the
version 0.44 or greater of the Multi-Buffer Crypto for IPsec library.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
AESNI MB PMD supports SHA224-HMAC and SHA384-HMAC,
but the documentation was not updated with this.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Update driver to use new AESNI Multibuffer IPSec library single
operation functionality (cipher only and authentication only).
This patch also adds tests for this new feature.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
The Intel(R) Multi Buffer Crypto library used in the AESNI MB PMD
has been moved to a new repository, in github.
This patch updates the link where it can be downloaded.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Extended functional AES-CBC and AES-CTR cipher-only
tests to run on QAT PMD.
Added AES_CBC cipher-only performance tests on QAT PMD.
No driver changes, but as now tested, QAT documentation
is updated to remove constraint.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Signed-off-by: Sameh Gobriel <sameh.gobriel@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Christian Maciocco <christian.maciocco@intel.com>
This new sample app, based on the client/server sample app,
shows the user an scenario using the EFD library.
It consists of:
- A front-end server which has an EFD table that stores the
node id for each flow key, which will distribute the incoming
packets to the different nodes
- A back-end node, which has a hash table where node checks,
after reading packets coming from the server, whether the packet
is meant to be used in such node, in which case it will be TXed,
or not, in which case, packet will be dropped.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Saikrishna Edupuganti <saikrishna.edupuganti@intel.com>
Acked-by: Christian Maciocco <christian.maciocco@intel.com>
Elastic Flow Distributor (EFD) is a distributor library that uses
perfect hashing to determine a target/value for a given incoming flow key.
It has the following advantages:
- First, because it uses perfect hashing, it does not store
the key itself and hence lookup performance is not dependent
on the key size.
- Second, the target/value can be any arbitrary value hence
the system designer and/or operator can better optimize service rates
and inter-cluster network traffic locating.
- Third, since the storage requirement is much smaller than a hash-based
flow table (i.e. better fit for CPU cache), EFD can scale to
millions of flow keys.
Finally, with current optimized library implementation performance
is fully scalable with number of CPU cores.
Signed-off-by: Byron Marohn <byron.marohn@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Saikrishna Edupuganti <saikrishna.edupuganti@intel.com>
Acked-by: Christian Maciocco <christian.maciocco@intel.com>
This commit introduces 8-bit, 16-bit, 32bit, 64bit I/O device
memory read/write operations along with the relaxed versions.
The weakly-ordered machine like ARM needs additional I/O barrier for
device memory read/write access over PCI bus.
By introducing the eal abstraction for I/O device memory read/write access,
The drivers can access I/O device memory in architecture agnostic manner.
The relaxed version does not have additional I/O memory barrier, useful in
accessing the device registers of integrated controllers which
implicitly strongly ordered with respect to memory access.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Because using a NFP PMD requires specific BSP installed, the PMD
support was not the default option before. This was just for making
people aware of such dependency, since there is no need for such a
BSP for just compiling DPDK with NFP PMD support.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Update the doc and release note.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
command is: set vf vlan tag port_id vf_id on|off
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Add command to call rte_pmd_i40e_set_vf_broadcast.
Add set vf broadcast in testpmd_funcs.rst file.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Add testpmd CLI to set VF multicast promiscuous mode on i40e.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Add testpmd CLI to set VF unicast promiscuous mode on i40e.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
The enic TSO implementation requires that the length of the Eth/IP/TCP
headers be passed to the NIC. Other than that, it's just a matter of
setting the mss and offload mode on a per packet basis.
In TSO mode, IP and TCP checksums are offloaded even if not requested
with mb->ol_flags.
Signed-off-by: John Daley <johndale@cisco.com>
Add PCI device ID for ConnectX-5 and enable multi-packet send for PF and VF
along with changing documentation and release note.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Add support for 8.14.x.x firmware.
The new firmware adds support for external PHY BCM8485x; configures
fixed link speed with transceiver/cable not supporting negotiation;
supports engine swap; supports overriding PCIe preset equalization
value; checks pause too long for ports and reads die temperature
every second for shutdown threshold.
It includes change in FLR flow when there is a SW initiated FLR.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
This patch implements NFP PMD support for TSO but it also requires
a firmware advertising the capability.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
NFP supports more speeds than just 40 and 100GB, which were
what was advertised before.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Mark Spender <mspender@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Extract RSS hash provided by the HW in the prefix and put it to mbuf.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
IPv4 header and TCP/UDP checksums for both IPv4 and IPv6 are supported.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
