Fixes: 1d0c90e6cf ("doc: update build instructions for libsso_snow3g")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
RFC3686: Using AES Counter (CTR) Mode With IPsec ESP.`
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add support for AES-GCM (Galois-Counter Mode).
RFC4106: The Use of Galois-Counter Mode (GCM) in IPSec ESP.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
NIST SP800-38A recommends two methods to generate unpredictable IVs
(Initilisation Vector) for CBC mode:
1) Apply the forward function to a nonce (ie. counter)
2) Use a FIPS-approved random number generator
This patch implements the first recommended method by using the forward
function to generate the IV.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This code provides the initial implementation of the libcrypto
poll mode driver. All cryptography operations are using Openssl
library crypto API. Each algorithm uses EVP_ interface from
openssl API - which is recommended by Openssl maintainers.
This patch adds libcrypto poll mode driver support to librte_cryptodev
library.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Added new SW PMD which makes use of the libsso SW library,
which provides wireless algorithms ZUC EEA3 and EIA3
in software.
This PMD supports cipher-only, hash-only and chained operations
("cipher then hash" and "hash then cipher") of the following
algorithms:
- RTE_CRYPTO_SYM_CIPHER_ZUC_EEA3
- RTE_CRYPTO_SYM_AUTH_ZUC_EIA3
The ZUC hash and cipher algorithms, which are enabled
by this crypto PMD are implemented by Intel's libsso software
library.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
This patch adds the configuration file support to ipsec_secgw
sample application. Instead of hard-coded rules, the users can
specify their own SP, SA, and routing rules in the configuration
file. A command line option "-f" is added to pass the
configuration file location to the application.
Configuration item formats:
SP rule format:
sp <ip_ver> <dir> esp <action> <priority> <src_ip> <dst_ip> \
<proto> <sport> <dport>
SA rule format:
sa <dir> <spi> <cipher_algo> <cipher_key> <auth_algo> <auth_key> \
<mode> <src_ip> <dst_ip>
Routing rule format:
rt <ip_ver> <src_ip> <dst_ip> <port>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
3DES support added to QuickAssist PMD with CTR and CBC mode.
Both cipher-only and chained with HMAC_SHAx.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Adding the support to bind/unbind crypto devices with
dpdk-devbind.py script, as now it is not restricted
to network devices anymore.
Signed-off-by: Eoin Breen <eoin.breen@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
SNOW 3G algorithm has all uppercase letters in its name
and a space between SNOW and 3G, but some references of it
had some lowercase letters or no space.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Update doc/guides/nics/bnxt.rst to indicate that the bnxt PMD driver
supports Broadcom NetXtreme-C/NetXtreme-E BCM5730X/BCM5740X family of
network controllers and Broadcom StrataGX BCM5871X family of
communications processors.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The ixgbe base driver was updated to version
cid-10g-shared-code.2016.04.12.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
And add read memory barrier to avoid status inconsistency
between two Rx descriptors readings.
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
81xx NIC subsystem differs in new PCI subsystem_device_id and
NICVF_CAP_CQE_RX2 capability.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Packet rejection was routed to a polled queue. This patch route them to a
dummy queue which is not polled.
Fixes: 76f5c99e68 ("mlx5: support flow director")
Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This change enables device LRO if requested.
The current implementation of jumbo frame Rx can be used for LRO
directly without changes.
Note that since jumbo frame uses both ring0 and ring1, it cannot
be enabled in UPT (VMDirectPath) mode.
Signed-off-by: Yong Wang <yongwang@vmware.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
This feature adds vhost pmd extended statistics from per port perspective
in order to meet the requirements of the applications such as OVS etc.
RX/TX xstats count the bytes without CRC. This is different from physical
NIC stats with CRC.
The statistics counters are based on RFC 2819 and RFC 2863 as follows:
rx/tx_good_packets
rx/tx_total_bytes
rx/tx_missed_pkts
rx/tx_broadcast_packets
rx/tx_multicast_packets
rx/tx_unicast_packets
rx/tx_undersize_errors
rx/tx_size_64_packets
rx/tx_size_65_to_127_packets;
rx/tx_size_128_to_255_packets;
rx/tx_size_256_to_511_packets;
rx/tx_size_512_to_1023_packets;
rx/tx_size_1024_to_1522_packets;
rx/tx_1523_to_max_packets;
rx/tx_errors
rx_fragmented_errors
rx_jabber_errors
rx_unknown_protos_packets;
No API is changed or added.
rte_eth_xstats_get_names() to retrieve what kinds of vhost xstats are
supported,
rte_eth_xstats_get() to retrieve vhost extended statistics,
rte_eth_xstats_reset() to reset vhost extended statistics.
The usage of vhost pmd xstats is the same as virtio pmd xstats.
for example, when test-pmd application is running in interactive mode
vhost pmd xstats will support the two following commands:
show port xstats all | port_id will show vhost xstats
clear port xstats all | port_id will reset vhost xstats
net/virtio pmd xstats(the function virtio_update_packet_stats) is used
as reference when implementing the feature.
Tested-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Added neon based Rx vector implementation.
Selection of the new handler based neon availability at runtime.
Updated the release notes and MAINTAINERS file.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Jianbo Liu <jianbo.liu@linaro.org>
Indirect descriptors are usually supported by virtio-net devices,
allowing to dispatch a larger number of requests.
When the virtio device sends a packet using indirect descriptors,
only one slot is used in the ring, even for large packets.
The main effect is to improve the 0% packet loss benchmark.
A PVP benchmark using Moongen (64 bytes) on the TE, and testpmd
(fwd io for host, macswap for VM) on DUT shows a +50% gain for
zero loss.
On the downside, micro-benchmark using testpmd txonly in VM and
rxonly on host shows a loss between 1 and 4%. But depending on
the needs, feature can be disabled at VM boot time by passing
indirect_desc=off argument to vhost-user device in Qemu.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
remove vhost-cuse code, including the eventfd_link kernel module that
is for vhost-cuse only.
The lib/virt/qemu-wrap.py is also removed, as it's mainly for vhost-cuse
usage.
As we have one vhost implementation now, one vhost config option is
needed only. Thus, CONFIG_RTE_LIBRTE_VHOST_USER is removed.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When VMDQ is enabled, different NICs have different behaviors for
disabling VLAN strip. In detail, i40e only enables/disables it of
PF's main vsi; fm10k cannot disable VLAN strip, etc. We now remove
this option, --vlan-strip, to reduce any confusion. And now, VLAN
strip will be enabled and cannot be disabled.
Reported-by: Qian Xu <qian.q.xu@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Simplify crypto and ethdev pci drivers init by using newly introduced
init macros and helpers.
Those drivers then don't need to register as "rte_driver"s anymore.
Exceptions:
- virtio and mlx* use RTE_INIT directly as they have custom initialization
steps.
- VDEV devices are not modified - they continue to use PMD_REGISTER_DRIVER.
Update documentation for replacing an example referring to
PMD_REGISTER_DRIVER.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
As discussed in the past release, driver names are modified
to be more consistent, and the future driver should follow
this new convention.
Driver names consist of:
"driver category"_"driver folder name"_"optional extra name".
For example:
- Crypto null driver -> "crypto_null"
- Network IXGBE VF driver -> "net_ixgbe_vf"
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Lists of DPDK files are hard to maintain up to date and does not bring
much information.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Following discussions on the mailing list [1] and since nobody stood up to
implement the necessary cleanups, here is the ivshmem integration removal.
There is not much to say about this patch, a lot of code is being removed.
The default configuration file for packet_ordering example is replaced with
the "native" x86 file.
The only tricky part is in eal_memory with the memseg index stuff.
More cleanups can be done after this but will come in subsequent patchsets.
[1]: http://dpdk.org/ml/archives/dev/2016-June/040844.html
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
dpdk-nic-bind.py script has been renamed to dpdk-devbind.py,
but some references to the old script have remained.
This commit completes the renaming.
Fixes: a5d7a3f77d ("unify tools naming")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
The log history feature was deprecated in 16.07.
The remaining empty functions are removed in 16.11.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: David Marchand <david.marchand@6wind.com>
It was planned to remove some mempool functions which are deprecated
since 16.07.
As no other mempool ABI change is planned in 16.11, it is better
to postpone and group every mempool ABI changes in 17.02.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Convert the NIC feature table in the overview doc into a set of ini
files and add functions into the Sphinx conf.py file to auto-generate
them back into an RST table.
The reason for doing this is to make it easier for PMD maintainers to
update the feature matrix that makes up the table and to avoid
frequent and hard to resolve conflicts in doc/guides/nics/overview.rst.
A NIC/PMD feature matrix is now an ini file like the following:
$ head doc/guides/nics/nic_features/i40e.ini
;
; Features of the i40e network driver.
;
[Features]
Link status = Y
Link status event = Y
Rx interrupt = Y
Queue start/stop = Y
...
The output RST table matches the existing table with the column
headers sorted.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add template release notes for DPDK 16.11 with inline
comments and explanations of the various sections.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
The API changes are planned for rte_port_source_params and
rte_port_sink_params, which will be supported from release 16.11.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Vhost-cuse was invented before vhost-user exist. The both are actually
doing the same thing: a vhost-net implementation in user space. But they
are not exactly the same thing.
Firstly, vhost-cuse is harder for use; no one seems to care it, either.
Furthermore, since v2.1, a large majority of development effort has gone
to vhost-user. For example, we extended the vhost-user spec to add the
multiple queue support. We also added the vhost-user live migration at
v16.04 and the latest one, vhost-user reconnect that allows vhost app
restart without restarting the guest. Both of them are very important
features for product usage and none of them works for vhost-cuse.
You now see that the difference between vhost-user and vhost-cuse is
big (and will be bigger and bigger as time moves forward), that you
should never use vhost-cuse, that we should drop it completely.
The remove would also result to a much cleaner code base, allowing us
to do all kinds of extending easier.
So here to mark vhost-cuse as deprecated in this release and will be
removed in the next release (v16.11).
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Rich Lane <rich.lane@bigswitch.com>
Acked-by: Jan Viktorin <viktorin@rehivetech.com>
Acked-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
There was a prior call with an explanation of what needs to be done:
http://dpdk.org/ml/archives/dev/2016-June/040844.html
- Qemu patch upstreamed
- IVSHMEM PCI device managed by a PCI driver
- No DPDK objects (ring/mempool) allocated by EAL
As nobody seems interested, it is time to remove this code which
makes EAL improvements harder.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Viktorin <viktorin@rehivetech.com>
Acked-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
For 16.11, the mbuf structure will be modified implying ABI breakage.
Some discussions already took place here:
http://www.dpdk.org/dev/patchwork/patch/12878/
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: John Daley <johndale@cisco.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This is an ABI deprecation notice for DPDK 16.11 in librte_ether about
changes in rte_eth_dev and rte_eth_desc_lim structures.
As discussed in that thread:
http://dpdk.org/ml/archives/dev/2015-September/023603.html
Different NIC models depending on HW offload requested might impose
different requirements on packets to be TX-ed in terms of:
- Max number of fragments per packet allowed
- Max number of fragments per TSO segments
- The way pseudo-header checksum should be pre-calculated
- L3/L4 header fields filling
- etc.
MOTIVATION:
-----------
1) Some work cannot (and didn't should) be done in rte_eth_tx_burst.
However, this work is sometimes required, and now, it's an
application issue.
2) Different hardware may have different requirements for TX offloads,
other subset can be supported and so on.
3) Some parameters (eg. number of segments in ixgbe driver) may hung
device. These parameters may be vary for different devices.
For example i40e HW allows 8 fragments per packet, but that is after
TSO segmentation. While ixgbe has a 38-fragment pre-TSO limit.
4) Fields in packet may require different initialization (like eg. will
require pseudo-header checksum precalculation, sometimes in a
different way depending on packet type, and so on). Now application
needs to care about it.
5) Using additional API (rte_eth_tx_prep) before rte_eth_tx_burst let to
prepare packet burst in acceptable form for specific device.
6) Some additional checks may be done in debug mode keeping tx_burst
implementation clean.
PROPOSAL:
---------
To help user to deal with all these varieties we propose to:
1. Introduce rte_eth_tx_prep() function to do necessary preparations of
packet burst to be safely transmitted on device for desired HW
offloads (set/reset checksum field according to the hardware
requirements) and check HW constraints (number of segments per
packet, etc).
While the limitations and requirements may differ for devices, it
requires to extend rte_eth_dev structure with new function pointer
"tx_pkt_prep" which can be implemented in the driver to prepare and
verify packets, in devices specific way, before burst, what should to
prevent application to send malformed packets.
2. Also new fields will be introduced in rte_eth_desc_lim:
nb_seg_max and nb_mtu_seg_max, providing an information about max
segments in TSO and non-TSO packets acceptable by device.
This information is useful for application to not create/limit
malicious packet.
APPLICATION (CASE OF USE):
--------------------------
1) Application should to initialize burst of packets to send, set
required tx offload flags and required fields, like l2_len, l3_len,
l4_len, and tso_segsz
2) Application passes burst to the rte_eth_tx_prep to check conditions
required to send packets through the NIC.
3) The result of rte_eth_tx_prep can be used to send valid packets
and/or restore invalid if function fails.
eg.
for (i = 0; i < nb_pkts; i++) {
/* initialize or process packet */
bufs[i]->tso_segsz = 800;
bufs[i]->ol_flags = PKT_TX_TCP_SEG | PKT_TX_IPV4
| PKT_TX_IP_CKSUM;
bufs[i]->l2_len = sizeof(struct ether_hdr);
bufs[i]->l3_len = sizeof(struct ipv4_hdr);
bufs[i]->l4_len = sizeof(struct tcp_hdr);
}
/* Prepare burst of TX packets */
nb_prep = rte_eth_tx_prep(port, 0, bufs, nb_pkts);
if (nb_prep < nb_pkts) {
printf("tx_prep failed\n");
/* drop or restore invalid packets */
}
/* Send burst of TX packets */
nb_tx = rte_eth_tx_burst(port, 0, bufs, nb_prep);
/* Free any unsent packets. */
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The right name of ethdev should be dpdk_netdev. However:
1/ We are using rte_ prefix in the code and library names.
2/ The API uses rte_ethdev
That's why 16.11 will just have the rte_ prefix prepended to
the library filename as every other libraries.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Jan Viktorin <viktorin@rehivetech.com>
Acked-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Driver names for all the supported devices in DPDK do not have
a naming convention. Some are using a prefix, some are not
and some have long names. Driver names are used when creating
virtual devices, so it is useful to have consistency in the names.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Remove deprecation notice pertaining to introduction of new flow
types in favor of a more generic filtering infrastructure proposal.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Add new section on tested platforms and nics and OSes to the release notes.
Signed-off-by: Yulong Pei <yulong.pei@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Improve the wording of some text in the "new features" section of
the release notes.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
When use i40e linux kernel driver as host driver and DPDK handler the i40e
VF, the promiscuous mode doesn't work in i40e VF. It is not supported by
DPDK i40e VF driver right now.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The following tools may be installed system-wide.
It may be cleaner and more convenient to find them with the same
dpdk- prefix (especially for autocompletion).
Moreover, the script dpdk_nic_bind.py deserves a new name because it is
not restricted to NICs and can be used for e.g. crypto.
These files are renamed:
pmdinfogen -> dpdk-pmdinfogen
pmdinfo.py -> dpdk-pmdinfo.py
dpdk_pdump -> dpdk-pdump
dpdk_proc_info -> dpdk-procinfo
dpdk_nic_bind.py -> dpdk-devbind.py
setup.sh -> dpdk-setup.sh
The tools pmdinfogen, pmdinfo.py and dpdk_pdump are new in 16.07.
The scripts dpdk_nic_bind.py and setup.sh may have been used with
previous releases by end users. That's why a symbolic link still
provide the old name in the installed tools directory.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Update the Sphinx installation instructions in the documentation
contributors guide to reflect the fact that in the 1.4+ versions
of Sphinx the ReadTheDocs theme must also be installed. Previously,
in version 1.3.x, it was installed by default.
Also change 'yum' to 'dnf' for package installations.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Fix warnings raised by Python Sphinx 1.4.5:
guides/sample_app_ug/ip_pipeline.rst:334:
WARNING: Could not lex literal_block as "ini". Highlighting skipped.
guides/sample_app_ug/l2_forward_real_virtual.rst:467:
WARNING: Could not lex literal_block as "c". Highlighting skipped.
guides/sample_app_ug/l3_forward.rst:293:
WARNING: Could not lex literal_block as "c". Highlighting skipped.
guides/sample_app_ug/vm_power_management.rst:162:
WARNING: Could not lex literal_block as "xml". Highlighting skipped.
These warnings arise from invalid syntax in code-block directives.
Fixes: f1e779ec5b ("doc: update ip pipeline app guide")
Fixes: d0dff9ba44 ("doc: sample application user guide")
Fixes: c75f4e6a7a ("doc: add vm power mgmt app")
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Flow Bifurcation is a mechanism which uses features of advanced
Ethernet devices to split traffic between queues. It provides
the capability to let the kernel driver and DPDK driver co-exist
and take advantage of both.
It is achieved by using SR-IOV and the NIC's advanced filtering. This
patch describes Flow Bifurcation and adds the user guide for ixgbe
and i40e NICs.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch adds an image of the Live Migration of a VM using vhost_user
on the host, test configuration.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch describes the procedure to be be followed to perform
Live Migration of a VM with Virtio PMD running on a host which
is running the vhost_user sample application (vhost-switch).
It includes sample host and VM scripts used in the procedure.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch adds an image of the Live Migration for
virtio and sriov test configuration.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch describes the procedure to be be followed
to perform Live Migration of a VM with Virtio and VF PMD's
using the bonding PMD.
It includes sample host and VM scripts used in the procedure,
and a sample switch configuration.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
- Fix vhost setup flags
- Add minor edits to improve readability and consistency
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The vhost feature negotiation only happens at virtio reset stage, say
when a virtio-net device is firstly initiated, or when DPDK virtio PMD
initiates. That means, if vhost APP restarts after the negotiation and
reconnects, the feature negotiation process will not be triggered again,
meaning the info is lost. To make reconnect work, QEMU simply saves
the negotiated features before the restart and restores it afterwards.
Therefore, the vhost supported features must be exactly the same before
and after the restart. For example, if TSO is disabled and then enabled,
nothing will work and undefined issues might happen.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The commit cb6696d220 ("drivers: update registration macro usage")
changes the name from virtio-user to virtio_user, because hyphen
cannot be used in a C symbol name. However, this commit does not
update the strings in docs and source code, which could lead to
failure to start this device as per the docs.
This patch updates related strings in the docs and source code.
Fixes: cb6696d220 ("drivers: update registration macro usage")
Reported-by: Tiwei Bie <tiwei.bie@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The correct mailing list dev@dpdk.org, not dev@dpkg.org.
Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Added a missing note about dependencies on libpcap and
CONFIG_RTE_LIBRTE_PMD_PCAP flag that pdump tool has.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Fixed default socket path name "/var/run" to "/var/run/.dpdk" and
"$HOME" to "~/.dpdk".
Fixes: 278f945402 ("pdump: add new library for packet capture")
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Since users of the pdump library and tool can chose to have their own
server and client paths, it is must for the pdump tool to use the same
server socket path that was used by primary application while
initializing packet capture framework by rte_pdump_init() or
rte_pdump_set_socket_dir() APIs.
To pass the socket path info to pdump tool a new optional command
line options "server-socket-path" and "client-socket-path" are added.
"client-socket-path" is also added, if the users want to have client
sockets in their own defined paths.
Updated pdump tool guide with the new changes.
Fixes: caa7028276 ("app/pdump: add tool for packet capturing")
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This file is going to disappear, remove the doxygen parts that reference
various drivers and remove it from the doxygen index.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Update l3fwd example usage and documentation with missing options.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch explains current virtio PMD Rx/Tx callbacks, to help understand
what's the difference, and how to enable the right ones.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
This patch adds support for extended statistics for BNX2X PMD.
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Acked-by: Remy Horton <remy.horton@intel.com>
This patch adds support for extended statistics for QEDE PMD.
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Update the 'High Performance of Small Packets on 40G NIC' section of the
Getting Started Guide (GSG) as the firmware version referenced for a NIC
using the i40e driver was version 4.2.5 which is no longer validated.
Instruct users to consult release notes for current validated firmware
versions.
Signed-off-by: Ian Stokes <ian.stokes@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
mmap the iomem range of the PCI device fails for kernels that
enabled CONFIG_IO_STRICT_DEVMEM option:
EAL: pci_map_resource():
cannot mmap(39, 0x7f1c51800000, 0x100000, 0x0):
Invalid argument (0xffffffffffffffff)
CONFIG_IO_STRICT_DEVMEM is introduced in Linux v4.5 and not enabled
by default:
Linux commit: 90a545e restrict /dev/mem to idle io memory ranges
As a workaround igb_uio can stop reserving PCI memory resources, from
kernel point of view iomem region looks like idle and mmap works
again. This matches uio_pci_generic usage.
With this update device iomem range is not protected against any
other kernel drivers or userspace access. But this shouldn't
be a problem for dpdk usage module since purpose of the igb_uio
module is to provide userspace access.
Fixes: af75078fec ("first public release")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
KASUMI PMD only supports bit-level cipher operations
when destination buffer is different from the source
(out of place operations). This commit adds a check
in the code to prevent the user from trying to perform
in-place bit-level ciphering.
Fixes: 2773c86d06 ("crypto/kasumi: add driver for KASUMI library")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Sphynx reports this error:
doc/guides/prog_guide/dev_kit_build_system.rst:337: WARNING:
Pygments lexer name u'C' is not known
Fixes: 737ddf3fb ("doc: add prog guide section documenting pmdinfo script")
Reported-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The recipe rte.hostapp.mk does not build in hostapp/ anymore.
Fixes: 98b0fdb0ff ("pmdinfogen: add buildtools and pmdinfogen utility")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Information on pmdinfogen may be useful to 3rd party driver developers.
Include documentation on what it does
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Mainly on updating vhost-user part: we now support client mode.
Also refine some words, and add a bit more explanation.
And made an emphatic statement that you are suggested to use vhost-user
instead of vhost-cuse, because we have enhanced vhost-user a lot since
v2.2 (Actually, I doubt there are any people still using vhost-cuse)
[John McNamara: rewords, better formats]
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
For all drivers that currently implement xstats, the id field in the
rte_eth_stats_name structure equals the entry's array index. This
patch eliminates the redundant id field as a direct index lookup is
faster than a search for the matching id field.
Suggested-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Remy Horton <remy.horton@intel.com>
The mempool_count and mempool_free_count behaved contrary to what their
names suggested. The free_count function actually returned the number of
elements that were allocated from the pool, not the number unallocated as
the name implied.
Fix this by introducing two new functions to replace the old ones,
* rte_mempool_avail_count to replace rte_mempool_count
* rte_mempool_in_use_count to replace rte_mempool_free_count
In this patch, the new functions are added, and the old ones are marked
as deprecated. All apps and examples that use the old functions are
updated to use the new functions.
Fixes: af75078fec ("first public release")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The mempool cache is only available to EAL threads as a per-lcore
resource. Change this so that the user can create and provide their own
cache on mempool get and put operations. This works with non-EAL threads
too. This commit introduces the new API calls:
rte_mempool_cache_create(size, socket_id)
rte_mempool_cache_free(cache)
rte_mempool_cache_flush(cache, mp)
rte_mempool_default_cache(mp, lcore_id)
Changes the API calls:
rte_mempool_generic_put(mp, obj_table, n, cache, flags)
rte_mempool_generic_get(mp, obj_table, n, cache, flags)
The cache-oblivious API calls use the per-lcore default local cache.
Signed-off-by: Lazaros Koromilas <l@nofutznetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This commit introduces the API calls:
rte_mempool_generic_put(mp, obj_table, n, is_mp)
rte_mempool_generic_get(mp, obj_table, n, is_mc)
Deprecates the API calls:
rte_mempool_mp_put_bulk(mp, obj_table, n)
rte_mempool_sp_put_bulk(mp, obj_table, n)
rte_mempool_mp_put(mp, obj)
rte_mempool_sp_put(mp, obj)
rte_mempool_mc_get_bulk(mp, obj_table, n)
rte_mempool_sc_get_bulk(mp, obj_table, n)
rte_mempool_mc_get(mp, obj_p)
rte_mempool_sc_get(mp, obj_p)
We also check cookies in one place now.
Signed-off-by: Lazaros Koromilas <l@nofutznetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The standard Virtual Ethernet Bridge(VEB) definition in 1Qbg is a bridge
which has an uplink port to the outside world (maybe another bridge), but
a "floating" VEB is a special VEB without an uplink port to the outside.
Instead, traffic can be sent from one VF to another using the floating
VEB - even when the physical link on the NIC port is down.
This patch adds floating VEB options in the devargs for i40e driver.
Using these parameters, applications can decide whether to use legacy
VEB/VEPA or a floating VEB.
To enable this feature, the user should pass a devargs parameter to the
EAL, for example "-w 84:00.0,enable_floating_veb=1", to control whether
the PMD will to use the floating VEB feature or not.
Once the floating VEB feature is enabled, all the VFs created by
this PF device are connected to the floating VEB.
NOTE: The floating VEB functionality requires a NIC firmware version
of 5.0 or greater.
Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Provide an update MTU callback. The function returns -ENOTSUP
if Rx scatter is enabled. Updating the MTU to be greater than
the value configured via the Cisco CIMC/UCSM management interface
is allowed provided it is still less than the maximum egress packet
size allowed by the NIC minus the size of the L2 header.
Signed-off-by: John Daley <johndale@cisco.com>
The ixgbe base driver was updated to version
cid-10g-shared-code.2016.04.12
The changes include:
Added sgmii link for X550.
Added mac link setup for X550a SFP and SFP+.
Added KR support for X550em_a.
Added new phy definitions for M88E1500.
Added support for the VLVF to be bypassed when adding/removing
a VFTA entry.
Added X550a flow control auto negotiation support.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
This feature enables the TX burst function to emit up to 5 packets using
only two work queue entries (WQEs) on devices that support it. Saves PCI
bandwidth and improves performance.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Olga Shern <olgas@mellanox.com>
Implement send inline feature which copies packet data directly into
work queue entries (WQEs) for improved latency. The maximum packet
size and the minimum number of Tx queues to qualify for inline send
are user-configurable.
This feature is effective when HW causes a performance bottleneck.
Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Mini (compressed) completion queue entries (CQEs) are returned by the
NIC when PCI back pressure is detected, in which case the first CQE64
contains common packet information followed by a number of CQE8
providing the rest, followed by a matching number of empty CQE64
entries to be used by software for decompression.
Before decompression:
0 1 2 6 7 8
+-------+ +---------+ +-------+ +-------+ +-------+ +-------+
| CQE64 | | CQE64 | | CQE64 | | CQE64 | | CQE64 | | CQE64 |
|-------| |---------| |-------| |-------| |-------| |-------|
| ..... | | cqe8[0] | | | . | | | | | ..... |
| ..... | | cqe8[1] | | | . | | | | | ..... |
| ..... | | ....... | | | . | | | | | ..... |
| ..... | | cqe8[7] | | | | | | | | ..... |
+-------+ +---------+ +-------+ +-------+ +-------+ +-------+
After decompression:
0 1 ... 8
+-------+ +-------+ +-------+
| CQE64 | | CQE64 | | CQE64 |
|-------| |-------| |-------|
| ..... | | ..... | . | ..... |
| ..... | | ..... | . | ..... |
| ..... | | ..... | . | ..... |
| ..... | | ..... | | ..... |
+-------+ +-------+ +-------+
This patch does not perform the entire decompression step as it would be
really expensive, instead the first CQE64 is consumed and an internal
context is maintained to interpret the following CQE8 entries directly.
Intermediate empty CQE64 entries are handed back to HW without further
processing.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Vasily Philipov <vasilyf@mellanox.com>
The latest version of Mellanox OFED exposes hardware definitions necessary
to implement data path operation bypassing Verbs. Update the minimum
version requirement to MLNX_OFED >= 3.3 and clean up compatibility checks
for previous releases.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Inline TX will be fully managed by the PMD after Verbs is bypassed in the
data path. Remove the current code until then.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
There is no scatter/gather support anymore, CONFIG_RTE_LIBRTE_MLX5_SGE_WR_N
has no purpose and can be removed.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Removing dependency on nfp_uio kernel module. The igb_uio
kernel modules can be used instead.
Fixes: 80bc1752f1 ("nfp: add guide")
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
In current i40e codebase, if single VLAN header is added in a packet,
it's treated as inner VLAN. Generally, a single VLAN header is
treated as the outer VLAN header, so update the driver behaviour
appropriately.
Fixes: 19b16e2f64 ("ethdev: add vlan type when setting ether type")
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
For performance reasons, this patch uses 2 VIC RQs per RQ presented to
DPDK.
The VIC requires that each descriptor be marked as either a start of
packet (SOP) descriptor or a non-SOP descriptor. A one RQ solution
requires skipping descriptors when receiving small packets and results
in bad performance when receiving many small packets.
The 2 RQ solution makes use of the VIC feature that allows a receive
on primary queue to 'spill over' into another queue if the receive is
too large to fit in the buffer assigned to the descriptor on the
primary queue. This means that there is no skipping of descriptors
when receiving small packets and results in much better performance.
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
- Add device id to the PCI table
- Add polling for the slowpath events for CMT mode device
- Add prerequisites to allow 100g mode
* Min number of queues needed is 2
* Only even number of queues are allowed
- Update documentation
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Add support for setting hash configuration based on adapter capability
and update corresponding NIC documentation.
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Intel stopped supporting Match Interface, remove reference to it in the
documentation.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Updated doc/guides/nics/overview.rst, doc/guides/nics/thunderx.rst
and release notes
Changed "*" to "P" in overview.rst to capture the partially supported
feature as "*" creating alignment issues with Sphinx table
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Slawomir Rosek <slawomir.rosek@semihalf.com>
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch adds the initial skeleton for bnxt driver along with the
nic guide, and ties the driver into the build system.
At this point, the driver simply fails init.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Reviewed-by: David Christensen <david.christensen@broadcom.com>
[Release Note Addition]
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
When using kernel PF and DPDK VF, when the PF driver finds the link
state changes, up -> down or down -> up, the driver will send a
message to VF by mailbox. This link state change may be
triggered by PHY disconnection/reconnection, user config change
like *ifconfig down/up* or interface parameter, like MTU change.
This patch enables the support of the mailbox interrupt,
so VF driver can receive the message for link up/down.
After VF receives this message, VF port need to be reset to
recover. This needs to be handled by the application so this patch
allows the app to register a reset callback so it can reset the VF port.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
When using kernel PF and DPDK VF, when the PF driver finds the link
state changes, up -> down or down -> up, the driver will send a
message to VF by mailbox. This link state change may be
triggered by PHY disconnection/reconnection, user config change
like *ifconfig down/up* or interface parameter, like MTU change.
This patch enables the support of the mailbox interrupt,
so VF driver can receive the message for link up/down.
After VF receives this message, VF port need to be reset to
recover. This needs to be handled by the application so this patch
allows the app to register a reset callback so it can reset the VF port.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Update the documentation and comments with brief details on the base
code version included in this release.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This patch enables configuring MTU for i40e.
Since changing MTU needs to reconfigure queue, the port must be
stopped before configuring MTU.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Previously, there was a known issue "On Intel® 40G Ethernet
Controller stopping the port does not really down the port link."
There were two reasons why the port was always kept up.
1. Old firmware versions had issues when "Set PHY config command"
was used on 40G NICs.
2. The kernel i40e driver didn't call "Set PHY config command" when
ifconfig up/down was used, it assumes the link is always up. But
in DPDK, ports are forced down when an applications quits. So if
the port is then switched to being controlled by kernel the driver,
the port can not be brought up through "ifconfig <ethx> up".
This patch fixes this issue by adding in "Set PHY config command"
into our driver. This is now possible because with newer firmware
there is no longer a problem using this command.
With this fix, after DPDK quit, if the port is switched to being used
by the kernel driver, "ethtool -s <ethx> autoneg on" can be used to
turn on the auto negotiation, and then port can be brought up through
"ifconfig <ethx> up".
NOTE: requires kernel i40e driver version >= 1.4.X
Fixes: 2f1e228174 ("i40e: skip link control as firmware workaround")
Fixes: 16c979f9ad ("i40e: disable setting of PHY configuration")
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Use ARM NEON intrinsic to implement ixgbe vPMD
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
[style fixes as highlighted by checkpatch.pl]
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This patch introduced scalable multi-writer Cuckoo Hash insertion
based on a split Cuckoo Search and Move operation using Intel
TSX. It can do scalable hash insertion with 22 cores with little
performance loss and negligible TSX abortion rate.
* Added an extra rte_hash flag definition to switch default single writer
Cuckoo Hash behavior to multiwriter.
- If HTM is available, it would use hardware feature for concurrency.
- If HTM is not available, it would fall back to spinlock.
* Created a rte_cuckoo_hash_x86.h file to hold all x86-arch related
cuckoo_hash functions. And rte_cuckoo_hash.c uses compile time flag to
select x86 file or other platform-specific implementations. While HTM check
is still done at runtime (same idea with
RTE_HASH_EXTRA_FLAGS_TRANS_MEM_SUPPORT)
* Moved rte_hash private struct definitions to rte_cuckoo_hash.h, to allow
rte_cuckoo_hash_x86.h or future platform dependent functions to include.
* Following new functions are created for consistent names when new platform
TM support are added.
- rte_hash_cuckoo_move_insert_mw_tm: do insertion with bucket movement.
- rte_hash_cuckoo_insert_mw_tm: do insertion without bucket movement.
* One extra multi-writer test case is added.
Signed-off-by: Wei Shen <wei1.shen@intel.com>
Signed-off-by: Sameh Gobriel <sameh.gobriel@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Until now, the objects stored in a mempool were internally stored in a
ring. This patch introduces the possibility to register external handlers
replacing the ring.
The default behavior remains unchanged, but calling the new function
rte_mempool_set_ops_byname() right after rte_mempool_create_empty() allows
the user to change the handler that will be used when populating
the mempool.
This patch also adds a set of default ops (function callbacks) based
on rte_ring.
Signed-off-by: David Hunt <david.hunt@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
NSH packet can be recognized by Intel X710/XL710 series.
This patch enables the new packet type.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Yulong Pei <yulong.pei@intel.com>
Acked-by: Zhe Tao <zhe.tao@intel.com>
- added VXLAN, GENEVE and NVGRE tunnel flow types
- added PORT flow type for accounting physical/virtual
port or channel number in flow creation
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add a new virtual device named virtio-user, which can be used just like
eth_ring, eth_null, etc. To reuse the code of original virtio, we do
some adjustment in virtio_ethdev.c, such as remove key _static_ of
eth_virtio_dev_init() so that it can be reused in virtual device; and
we add some check to make sure it will not crash.
Configured parameters include:
- queues (optional, 1 by default), number of queue pairs, multi-queue
not supported for now.
- cq (optional, 0 by default), not supported for now.
- mac (optional), random value will be given if not specified.
- queue_size (optional, 256 by default), size of virtqueues.
- path (madatory), path of vhost user.
When enable CONFIG_RTE_VIRTIO_USER (enabled by default), the compiled
library can be used in both VM and container environment.
Examples:
path_vhost=<path_to_vhost_user> # use vhost-user as a backend
sudo ./examples/l2fwd/build/l2fwd -c 0x100000 -n 4 \
--socket-mem 0,1024 --no-pci --file-prefix=l2fwd \
--vdev=virtio-user0,mac=00:01:02:03:04:05,path=$path_vhost -- -p 0x1
Known issues:
- Control queue and multi-queue are not supported yet.
- Cannot work with --huge-unlink.
- Cannot work with no-huge.
- Cannot work when there are more than VHOST_MEMORY_MAX_NREGIONS(8)
hugepages.
- Root privilege is a must (mainly becase of sorting hugepages according
to physical address).
- Applications should not use file name like HUGEFILE_FMT ("%smap_%d").
- Cannot work with vhost-net backend.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
All other DPDK PMDs doesn't support concurrent receiving or sending
packets to the same queue. The upper application should deal with
this, normally through queue and core bindings.
Due to historical reason, vhost internally supports concurrent lockless
enqueuing packets to the same virtio queue through costly cmpset operation.
This patch removes this internal lockless implementation and should improve
performance a bit.
Luckily DPDK OVS doesn't rely on this behavior.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Allow reconnecting on failure by default when:
- DPDK app starts first and QEMU (as the server) is not started yet.
Without reconnecting, DPDK app would simply fail on vhost-user
registration.
- QEMU restarts, say due to OS reboot.
Without reconnecting, you can't re-establish the connection without
restarting DPDK app.
This patch make it work well for both above cases. It simply creates
a new thread, and keep trying calling "connect()", until it succeeds.
The reconnect could be disabled when RTE_VHOST_USER_NO_RECONNECT flag
is set.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Add a new paramter (flags) to rte_vhost_driver_register(). DPDK
vhost-user acts as client mode when RTE_VHOST_USER_CLIENT flag
is set. The flags would also allow future extensions without
breaking the API (again).
The rest is straingfoward then: allocate a unix socket, and
bind/listen for server, connect for client.
This extension is for vhost-user only, therefore we simply quit
and report error when any flags are given for vhost-cuse.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
With all the previous prepare works, we are just one step away from
the final ABI refactoring. That is, to change current API to let them
stick to vid instead of the old virtio_net dev.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Tested-by: Rich Lane <rich.lane@bigswitch.com>
Acked-by: Rich Lane <rich.lane@bigswitch.com>
The new API rte_vhost_avail_entries() is actually a rename of
rte_vring_available_entries(), with the "vring" to "vhost" name
change to keep the consistency of other vhost exported APIs.
This change could let us avoid the dependency of "virtio_net"
struct, to prepare for the ABI refactoring.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Tested-by: Rich Lane <rich.lane@bigswitch.com>
Acked-by: Rich Lane <rich.lane@bigswitch.com>
1. add KNI support to the IP Pipeline sample Application
2. some bug fix
3. update doc
4. add config file with two KNI interfaces connected using
a Linux kernel bridge
Signed-off-by: WeiJie Zhuang <zhuangwj@gmail.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
add KNI port type to the packet framework
Signed-off-by: WeiJie Zhuang <zhuangwj@gmail.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Underlying libsso_snow3g library now supports bit-level
operations, so PMD has been updated to allow them.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
With the library update, the way to compile the library
has changed, so documentation reflects this change.
Also, the patch to fix the compilation issues present with gcc > 5.0
has been removed, as the issues have been fixed in the library.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
The underlying libsso library that SNOW3G PMD uses has been updated,
so now it is called libsso_snow3g. Also, the path to the library
has been renamed to reflect this changes (now called LIBSSO_SNOW3G_PATH).
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Added new SW PMD which makes use of the libsso_kasumi SW library,
which provides wireless algorithms KASUMI F8 and F9
in software.
This PMD supports cipher-only, hash-only and chained operations
("cipher then hash" and "hash then cipher") of the following
algorithms:
- RTE_CRYPTO_SYM_CIPHER_KASUMI_F8
- RTE_CRYPTO_SYM_AUTH_KASUMI_F9
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Some crypto PMDs that support symmetric crypto were not marked
as supported in the supported feature flags table.
Fixes: 2373c0661b ("doc: add cryptodevs guide overview")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The new pdump tool is added for packet capturing on dpdk.
This tool runs as secondary process by default.
Tool facilitates the command line options like
port, device_id, queue which user should pass on
to the tool to request the packet capture on those devices.
Tool creates the rte ring, mempool and pcap vdev and
calls the enable API of the pdump library with port/device_id,
queue, ring and mempool as arguments to enable the packet
capture on specific devices and gets the packets from the
primary process over the ring. Once the packets are
received, those packets will be send to the pcap vdev.
Tool can be terminated by using ctrl+c(SIGINT) upon which tool
calls the disable API of the pdump library to disable the packet capture
and dequeues the rest of the packets from the ring and sends them on
to the pcap vdev, then after releases all allocated resources.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The librte_pdump library provides a framework for
packet capturing in dpdk. The library provides set of
APIs to initialize the packet capture framework, to
enable or disable the packet capture, and to uninitialize
it.
The librte_pdump library works on a client/server model.
The server is responsible for enabling or disabling the
packet capture and the clients are responsible
for requesting the enabling or disabling of the packet
capture.
Enabling APIs are supported with port, queue, ring and
mempool parameters. Applications should pass on this information
to get the packets from the dpdk ports.
For enabling requests from applications, library creates the client
request containing the mempool, ring, port and queue information and
sends the request to the server. After receiving the request, server
registers the Rx and Tx callbacks for all the port and queues.
After the callbacks registration, registered callbacks will get the
Rx and Tx packets. Packets then will be copied to the new mbufs that
are allocated from the user passed mempool. These new mbufs then will
be enqueued to the application passed ring. Applications need to dequeue
the mbufs from the rings and direct them to the devices like
pcap vdev for viewing the packets outside of the dpdk
using the packet capture tools.
For disabling requests, library creates the client request containing
the port and queue information and sends the request to the server.
After receiving the request, server removes the Rx and Tx callback
for all the port and queues.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The new fields nb_rx_queues and nb_tx_queues are added to the
rte_eth_dev_info structure.
Changes to API rte_eth_dev_info_get() are done to update these new fields
to the rte_eth_dev_info object.
Release notes is updated with the changes.
The librte_pdump library needs to register Rx and Tx callbacks for all
the nb_rx_queues and nb_tx_queues, when application wants to capture the
packets on all the software configured number of Rx and Tx queues of the
device. So far there is no support to get nb_rx_queues and nb_tx_queues
information from the ethdev library. Hence these changes are introduced.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Adds and documents new callbacks that allow transitions to core
states other than dead to be reported to applications.
Signed-off-by: Remy Horton <remy.horton@intel.com>
The current extended ethernet statistics fetching involve doing several
string operations, which causes performance issues if there are lots of
statistics and/or network interfaces. This patch changes the test-pmd
and proc_info applications to use the new xstats API, and removes
deprecated code associated with the old API.
Signed-off-by: Remy Horton <remy.horton@intel.com>
The current extended ethernet statistics fetching involve doing several
string operations, which causes performance issues if there are lots of
statistics and/or network interfaces. This patch changes the xstats
functions to instead use a numeric identifier rather than a string, and
adds the ability to retrieve identifier-to-string mappings.
Signed-off-by: Remy Horton <remy.horton@intel.com>
This patch enables configurable tx_first burst number.
Use "start tx_first (burst_num)" to specify how many bursts of packets to
be sent before forwarding start, or "start tx_first" like before for the
default 1 burst send.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch adds retry option in testpmd to prevent most packet losses.
It can be enabled by "set fwd <mode> retry". All modes except rxonly
support this option.
Adding retry mechanism expands test case coverage to support scenarios
where packet loss affects test results.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The behavior of PKT_RX_VLAN_PKT was not very well defined, resulting in
PMDs not advertising the same flags in similar conditions.
Following discussion in [1], introduce 2 new flags PKT_RX_VLAN_STRIPPED
and PKT_RX_QINQ_STRIPPED that are better defined:
PKT_RX_VLAN_STRIPPED: a vlan has been stripped by the hardware and its
tci is saved in mbuf->vlan_tci. This can only happen if vlan stripping
is enabled in the RX configuration of the PMD.
For now, the old flag PKT_RX_VLAN_PKT is kept but marked as deprecated.
It should be removed from applications and PMDs in a future revision.
This patch also updates the drivers. For PKT_RX_VLAN_PKT:
- e1000, enic, i40e, mlx5, nfp, vmxnet3: done, PKT_RX_VLAN_PKT already
had the same meaning than PKT_RX_VLAN_STRIPPED, minor update is
required.
- fm10k: done, PKT_RX_VLAN_PKT already had the same meaning than
PKT_RX_VLAN_STRIPPED, and vlan stripping is always enabled on fm10k.
- ixgbe: modification done (vector and normal), the old flag was set
when a vlan was recognized, even if vlan stripping was disabled.
- the other drivers do not support vlan stripping.
For PKT_RX_QINQ_PKT, it was only supported on i40e, and the behavior was
already correct, so we can reuse the same bit value for
PKT_RX_QINQ_STRIPPED.
[1] http://dpdk.org/ml/archives/dev/2016-April/037837.html,
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch docs the issue on EAL argument that the last EAL
argument is replaced by program name in argv[].
Reported-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch is used to add the class_id (class_code,
subclass_code, programming_interface) support for
pci_device probe. With this patch, it will be
flexible for users to probe a class of devices
by class_id.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The commit 66819e6 has introduced a dependency on libarchive to be able
to use some tar resources in the unit tests.
It is now an optional dependency because some systems do not have it
installed.
If CONFIG_RTE_APP_TEST_RESOURCE_TAR is disabled, the PCI test will not
be run. When a "configure" script will be integrated, the libarchive
availability could be checked to automatically enable the option.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Reviewed-by: Jan Viktorin <viktorin@rehivetech.com>
The log history uses rte_mempool. In order to remove the mempool
dependency in EAL (and improve the build), this feature is deprecated.
The ABI is kept but the behaviour is now voided because it seems this
function was not used. The history can be read from syslog.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Fix broken console directive in the ABI validator section of the
ABI versioning docs.
Fixes: f1ef9794f9 ("doc: add ABI guidelines")
Signed-off-by: John McNamara <john.mcnamara@intel.com>
A previous patch modified the CLIs witout updating the examples.
Fixes: 53b2bb9b7e ("app/testpmd: new flow director commands")
Signed-off-by: Mauricio Vasquez B <mauricio.vasquezbernal@studenti.polito.it>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Port needs to be stopped and then closed before it can be detached,
but the documentation was only saying to close the port.
Also, both sections for port detaching and attaching has been reformatted
slightly, to show clearly how to use the commands.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
"port config all txqflags <value>" allows for
specifying txq_flags value in command line.
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
"port config all scatter on|off" allows for
controlling rxmode.enable_scatter in command line.
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This parameter allows for controlling rxmode.enable_scatter
which in turn allow for multi-segment packet receive tests.
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The routing pipeline registers a callback function with the nic ports and
this function is invoked for updating the routing entries (corresponding to
local host and directly attached network) tables whenever the nic ports
change their states (up/down).
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
As a result of tracking, output ports of routing pipelines are linked with
physical nic ports (potentially through other pipeline instances).
Thus, the mac addresses of the NIC ports are assigned to routing pipeline
out ports which are connected to them and are further used in routing table
entries instead of hardcoded default values.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch enables rss (receive side scaling) per network interface
through the configuration file. The user can specify following
parameters in LINK section for enabling the rss feature - rss_qs,
rss_proto_ipv4, rss_proto_ipv6 and ip_proto_l2.
The "rss_qs" is mandatory parameter which indicates the queues to be
used for rss, while rest of the parameters are optional. When optional
parameters are not provided in the configuration file, default setting
(ETH_RSS_IPV4 | ETH_RSS_IPV6) is assumed for "rss_hf" field of the
rss_conf structure.
For example, following configuration can be applied for using the rss
on port 0 of the network interface;
[PIPELINE0]
type = MASTER
core = 0
[LINK0]
rss_qs = 0 1
[PIPELINE1]
type = PASS-THROUGH
core = 1
pktq_in = RXQ0.0 RXQ0.1 RXQ1.0
pktq_out = TXQ0.0 TXQ1.0 TXQ0.1
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Corrected a typo in application name.
Corrected authentication algorithm to fit the sample 16-byte
authentication key.
Fixes: ba7b86b1 ("doc: add l2fwd-crypto sample app guide")
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
This patch provides counter mode support to AES-NI multi-buffer library.
The following cipher algorithm is enabled:
- RTE_CRYPTO_CIPHER_AES_CTR
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Added possibility for AES to work in counter mode
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
AES-NI MB PMD supports 128, 192 and 256-bit keys,
not 128, 256 and 512-bit keys.
Fixes: 924e84f873 ("aesni_mb: add driver for multi buffer based crypto")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Commit 4768c475 added a pointer to the memzone in rte_ring. However,
all memzones are residing in local mem_config, therefore accessing
the memzone pointer inside the guest in an IVSHMEM-shared rte_ring
will cause segmentation fault. This issue is unlikely to ever get
fixed, as this would require lots of changes for very little benefit,
therefore we're documenting this limitation instead.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Added PEP8 to the DPDK Coding Style guidelines to cover Python
contributions to DPDK.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Remove the deprecation notice and add an entry in the release note
for the changes in mempool allocation.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
The rte_pktmbuf_detach() function should decrease refcnt on a direct
buffer as stated in doc/guides/prog_guide/mbuf_lib.rst:
"whenever the indirect buffer is detached, the reference counter on the
direct buffer is decremented."
Signed-off-by: Hiroyuki Mikita <h.mikita89@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The rte_mempool structure is changed, which will cause an ABI change
for this structure. Providing backward compat is not reasonable
here as this structure is used in multiple defines/inlines.
Allow mempool cache support to be dynamic depending on if the
mempool being created needs cache support. Saves about 1.5M of
memory used by the rte_mempool structure.
Allocating small mempools which do not require cache can consume
larges amounts of memory if you have a number of these mempools.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
We don't want to have this instructions in the generated docs, so use
comments. It's also less confusing for people adding entries in the
documentation.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The rte_eth_dev_count() function will never return a value greater
than RTE_MAX_ETHPORTS, so that checking is useless.
Signed-off-by: Mauricio Vasquez B <mauricio.vasquezbernal@studenti.polito.it>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
It's reported that it's has not been working for a long while. And due
to it's complex, it's better to redesign it than to fix it to make it
work again.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Previously, for tunnel packets, such as VXLAN/NVGRE, the vlan
tags of the inner header will be stripped without putting vlan
info to descriptor, what is not expected behaviour.
This patch fixes it by changing hardware configuration to leave
the inner packet alone.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Fixes: a778a1fa2e ("i40e: set up and initialize flow director")
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
The Qlogic Everest Driver for Ethernet(QEDE) Poll Mode Driver(PMD) is
the DPDK specific module for QLogic FastLinQ QL4xxxx 25G/40G CNA family
of adapters as well as their virtual functions (VF) in SR-IOV context.
This patch adds QEDE PMD, which interacts with base driver and
initialises the HW.
This patch content also includes:
- eth_dev_ops callbacks
- Rx/Tx support for the driver
- link default configuration
- change link property
- link up/down/update notifications
- vlan offload and filtering capability
- device/function/port statistics
- qede nic guide and updated overview.rst
Note that the follow on commits contain the code for the features mentioned
in documents but not implemented in this patch.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
The macro RTE_VERIFY always checks a condition.
It is optimized with "unlikely" hint.
While this macro is well suited for test applications, it is preferred
in libraries and examples to enable such check in debug mode.
That's why the macro RTE_ASSERT is introduced to call RTE_VERIFY only
if built with debug logs enabled.
A lot of assert macros were duplicated and enabled with a specific flag.
Removing these #ifdef allows to test these code branches more easily
and avoid dead code pitfalls.
The ENA_ASSERT is kept (in debug mode only) because it has more
parameters to log.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The default was to compile every logs (including debug) and set
the default level to debug.
As some debug logs may hurt performance, a notice is added and the
default level is now info.
In order to enable debug logs, they must be compiled with
RTE_LOG_LEVEL=RTE_LOG_DEBUG and enabled at runtime with --log-level=8.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Changed symbol on NIC overview table from X to Y to help
clarify the indicated features are supported. The X caused
confusion for some readers.
Also, added * character to indicate partially supported
features. This can be used in the future to direct the reader
to more specific details in the individual NIC guides.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
The function rte_hash_lookup_multi() was renamed rte_hash_lookup_bulk()
in DPDK 1.4 and was kept as an undocumented alias.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Some statistics were deprecated since release 2.1 (49f386542a).
The last deprecated counter to be used was imcasts.
The VF loopback statistics are also removed as they are used only
in igb and duplicated in extended statistics.
The new counters should be added to extended statistics.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Remy Horton <remy.horton@intel.com>
The driver i40e was using a specific PCI config before the release 16.04.
Since 16.04, it is always enabled in i40e (commit 56465cfaf).
The API has been deprecated in the commit 68f7759382.
The igb_uio implementation has been deprecated in commit b7cf8e155.
The config helper - through igb_uio sysfs entries - is now removed.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Support of PCAP file has been added to rte_port in release 16.04
as NEXT_ABI. It is in the standard ABI of the release 16.07.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The git messages have three parts:
1/ the headline
2/ the explanations
3/ the footer tags
The headline helps to quickly browse an history or catch instantly the
purpose of a commit. Making it short with some consistent wording
allows to easily parse it or match some patterns.
The explanations must give some keys like the reason of the change.
Nothing can be automatically checked for this part, except line length.
The footer contains some tags to find the origin of a bug or who
was working on it.
This script is doing some basic checks mostly on parts 1 and 3.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Add a new section on tested platforms and nics to the release notes.
Signed-off-by: Qian Xu <qian.q.xu@intel.com>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Following discussions with Jan, here is a deprecation notice to prepare for
hotplug and rte_device changes to come in 16.07.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Jan Viktorin <viktorin@rehivetech.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
We currently exposed way too many fields (or even structures) than
necessary. For example, vhost_virtqueue struct should NOT be exposed
to user at all: application just need to tell the right queue id to
locate a specific queue, and that's all. Instead, the structure should
be defined in an internal header file. With that, we could do any changes
to it we want, without worrying about that we may offense the painful
ABI rules.
Similar changes could be done to virtio_net struct as well, just exposing
very few fields that are necessary and moving all others to an internal
structure.
Huawei then suggested a more radical yet much cleaner one: just exposing
a virtio_net handle to application, just like the way kernel exposes an
fd to user for locating a specific file, and exposing some new functions
to access those old fields, such as flags, virt_qp_nb.
With this change, we're likely to be free from ABI violations forever
(well, except when we have to extend the virtio_net_device_ops struct).
For example, following nice cleanup would not be a blocking one then:
http://dpdk.org/ml/archives/dev/2016-February/033528.html
Suggested-by: Huawei Xie <huawei.xie@intel.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add a programmer's guide section for cryptodev library.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Details supported device features and algorithms for each crypto PMD.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch adds a notice that the API for the xstats
functionality will be modified in the 16.07 release, with
no backwards compatibility planned as it would require
code duplication in each PMD that supports xstats.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Acked-by: David Harton <dharton@cisco.com>
Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
Several new fields will be added to structure rte_port_source_params for
source port enhancement with pcap file reading support.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Enable "other kdrv" because both NICs require kernel support to work.
Unicast and multicast MAC filters are also enabled as both address types can
be filtered on through the MAC add/remove/set callbacks.
Fixes: e86b85ca75 ("doc: fill nics features matrix for mlx")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Fixes: 83a4a15404 ("doc: fill nics features matrix for e1000/igb and ixgbe")
Reported-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch updates the titles in the multiprocess memory image
to read "Primary Process" and "Secondary Process" instead of
"DPDK Server Process" and "Customer Client Process".
The rest of the image has been converted from PNG to SVG.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Explain how to create/initialize virtual crypto PMDs,
through command line and within an application.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
A new process to request the libsso library required by the SNOW3G PMD
has been put in place, through a website, replacing the previous email method.
This commit updates the SNOW3G documentation, to reflect this change.
Since the library does not support newer gcc versions, the documentation
also contains a patch to make the library work with gcc > 5.0.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Change rte_hash*_create() functions to return NULL and set rte_errno to
EEXIST when the object name already exists. This is the behavior
described in the API documentation in the header file.
These functions were returning a pointer to the existing object in that
case, but it is a problem as the caller did not know if the object had
to be freed or not.
Doing this change also makes the hash API more consistent with the other
APIs (mempool, rings, ...).
Fixes: 916e4f4f4e ("memory: fix for multi process support")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Change rte_lpm*_create() functions to return NULL and set rte_errno to
EEXIST when the object name already exists. This is the behavior
described in the API documentation in the header file.
These functions were returning a pointer to the existing object in that
case, but it is a problem as the caller did not know if the object had
to be freed or not.
Doing this change also makes the lpm API more consistent with the other
APIs (mempool, rings, ...).
Fixes: 916e4f4f4e ("memory: fix for multi process support")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The issue is the VF's link speed kept as 10G and status always was up.
It did not change even the physical link's status changed.
This patch fixes this issue to make VF's link info consistent with
physical link.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Note: virtio is a para-virtualization device, which indicates that its
features depend on not only front end but also back end. Here by X, we
just mean the feature is supported in front end.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
The purpose of this patch is used to add a new field
"class" in rte_pci_id structure. The new class field includes
class_id, subcalss_id, programming interface of a pci device.
With this field, we can identify pci device by its class info,
which can be more flexible instead of probing the device by
vendor_id OR device_id OR subvendor_id OR subdevice_id.
For example, we can probe all nvme devices by class field, which
can be quite convenient.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Add a deprecation notice for coming changes in mempool for 16.07.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: David Hunt <david.hunt@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Announce the ABI breakage due to addition of external mempool
manager functionality which requires changes to rte_mempool
structure.
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Deprecation notice for 16.04 for changes to occur in
release 16.07 for rte_mempool memory reduction.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: David Hunt <david.hunt@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The link speed configuration is now done with bitmaps so 100G speed
requires only a new bit flag.
The actual link speed is a number so its size must be increased from
16-bit to 32-bit.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Tested-by: Matej Vido <vido@cesnet.cz>
This patch redesigns the API to set the link speed/s configuration
of an ethernet port. Specifically:
- it allows to define a set of advertised speeds for
auto-negociation.
- it allows to disable link auto-negociation (single fixed speed).
- default: auto-negociate all supported speeds.
A flag autoneg in struct rte_eth_link indicates if link speed was a
result of auto-negociation or was fixed by configuration.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Beilei Xing <beilei.xing@intel.com>
Tested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The speed capabilities of a device can be retrieved with
rte_eth_dev_info_get().
The new field speed_capa is initialized in the drivers without
taking care of device characteristics in this patch.
When the capabilities of a driver are accurate, the table in
overview.rst must be filled.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Hash library used a function pointer to choose a different
key compare function, depending on the key size.
As a result, multiple processes could not use the same hash table,
as the function addresses vary from one process to another.
Instead, a jump table is used, so each process has its own
function addresses, accessing this table with an index stored
in the hash table (note that using a custom key compare function
is not supported in multi-process mode).
Fixes: 48a3991196 ("hash: replace with cuckoo hash implementation")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch adds out-of-place operations to qat symmetric crypto PMD,
i.e. the result of the operation can be written to the destination buffer
instead of overwriting the source buffer as done in "in-place" operation.
Both buffers can be of different sizes.
Previously the qat PMD assumed that m_src and m_dst in rte_crypto_sym_op
were identical.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: John Griffin <john.griffin@intel.com>
Previously, vector driver is not the first (default) choice for i40e,
as it cannot fill packet type info for l3fwd to work well. Now there
is an option for l3fwd to analysis packet type softly. So enable it
by default.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
As a example to use ptype info, l3fwd needs firstly to use
rte_eth_dev_get_supported_ptypes() API to check if device and/or
its PMD driver will parse and fill the needed packet type; if not,
use the newly added option, --parse-ptype, to analyze it in the
callback softly.
As the mode of EXACT_MATCH uses the 5 tuples to caculate hash, so
we narrow down its scope to:
a. ip packets with no extensions, and
b. L4 payload should be either tcp or udp.
Note: this patch does not completely solve the issue, "cannot run
l3fwd on virtio or other devices", because hw_ip_checksum may be
not supported by the devices. Currently we can:
a. remove this requirements, or
b. wait for virtio front end (pmd) to support it.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Ixgbe HW supports 128 TX queues. However, the full 128 queues are only
available in VT and DCB mode. In normal default "none" mode (VT/DCB off)
the maximum number of available queues is only 64.
The driver doesn't check the mode when reporting the available
number of queues, allowing more that 64 queues to be used in all cases.
If a queue no. >=64 is used in default mode, the TX packets will be dropped
silently.
This change adds a check to forbid using a queue number larger than 64
during device configuration (in default mode), so that the problem is
reported as early as possible.
Fixes: 27b609cbd1 ("ethdev: move the multi-queue mode check to specific drivers")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch extends the commands for changing flow director filter's input
set. It adds vlan as a possible filter input field.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch extends flow director to select vlan id as part of
filter's input set and program the filter rule with vlan id.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch extends commands for changing a flow director filter's input
set. It adds tos, protocol and ttl as filter's input fields, and removes
the words selection from flex payloads.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch adds RTE_ETH_INPUT_SET_L3_IP4_TTL,
RTE_ETH_INPUT_SET_L3_IP6_HOP_LIMITS input field types and extends
struct rte_eth_ipv4_flow and rte_eth_ipv6_flow to support filtering
by tos, protocol and ttl.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
VLAN insertion can be done in hardware when supported in Verbs. A software
fallback is provided otherwise. The software implementation is also used
when multi-packet send is enabled on a queue, as both features are mutually
exclusive.
Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Environment variable MLX5_PMD_ENABLE_PADDING enables HW packet padding
in PCI bus transactions.
When packet size is cache aligned and CRC stripping is enabled, 4 fewer
bytes are written to the PCI bus. Enabling padding makes such packets
aligned again.
In cases where PCI bandwidth is the bottleneck, padding can improve
performance by 10%.
This is disabled by default since this can also decrease performance for
unaligned packet sizes.
Signed-off-by: Olga Shern <olgas@mellanox.com>
fix packet padding macro check
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Secondary processes are expected to use queues and other resources
allocated by the primary, however Verbs resources can only be shared
between processes when inherited through fork().
This limitation can be worked around for TX by configuring separate queues
from secondary processes.
Signed-off-by: Or Ami <ora@mellanox.com>
Add driver functions to set link state up or down.
Burst functions are updated to make sure applications cannot attempt to
send/receive after link is brought down.
Signed-off-by: Or Ami <ora@mellanox.com>
When Linux PF and DPDK VF are used for i40e PMD, when a PF reset occurs,
an interrupt will go via adminq event to inform the VF of the reset.
A callback mechanism is introduced for the VF to allow it to invoke a
registered callback when PF reset happens.
Users can register a callback for this interrupt event using:
rte_eth_dev_callback_register(portid,
RTE_ETH_EVENT_INTR_RESET,
reset_event_callback,
arg);
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
The patch introduces a new PMD. This PMD is implemented as thin wrapper
of librte_vhost. It means librte_vhost is also needed to compile the PMD.
The vhost messages will be handled only when a port is started. So start
a port first, then invoke QEMU.
The PMD has 2 parameters.
- iface: The parameter is used to specify a path to connect to a
virtio-net device.
- queues: The parameter is used to specify the number of the queues
virtio-net device has.
(Default: 1)
Here is an example.
$ ./testpmd -c f -n 4 --vdev 'eth_vhost0,iface=/tmp/sock0,queues=1' -- -i
To connect above testpmd, here is qemu command example.
$ qemu-system-x86_64 \
<snip>
-chardev socket,id=chr0,path=/tmp/sock0 \
-netdev vhost-user,id=net0,chardev=chr0,vhostforce,queues=1 \
-device virtio-net-pci,netdev=net0,mq=on
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Rich Lane <rich.lane@bigswitch.com>
Tested-by: Rich Lane <rich.lane@bigswitch.com>
Update for queue state event name:
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This is a PMD for the Amazon ethernet ENA (Elastic Network Adapters)
family.
The driver operates variety of ENA adapters through feature negotiation
with the adapter and upgradable commands set.
ENA driver handles PCI Physical and Virtual ENA functions.
Signed-off-by: Evgeny Schemeilin <evgenys@amazon.com>
Signed-off-by: Jan Medala <jan@semihalf.com>
Signed-off-by: Jakub Palider <jpa@semihalf.com>
Release Note addition:
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This patch implements PQoS as a sample application.
PQoS allows management of the CPUs last level cache,
which can be useful for DPDK to ensure quality of service.
The sample app links against the existing 01.org PQoS library
(https://github.com/01org/intel-cmt-cat).
White paper demonstrating example use case "Increasing Platform Determinism
with Platform Quality of Service for the Data Plane Development Kit"
(http://www.intel.com/content/www/us/en/communications/increasing-platform-determinism-pqos-dpdk-white-paper.html)
Signed-off-by: Wojciech Andralojc <wojciechx.andralojc@intel.com>
Signed-off-by: Tomasz Kantecki <tomasz.kantecki@intel.com>
Signed-off-by: Marcel D Cornu <marcel.d.cornu@intel.com>
This patch updates the release notes with the features that
have been added to ip_pipeline application.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
