The function rte_snprintf serves no useful purpose. It is the
same as snprintf() for all valid inputs. Deprecate it and
replace all uses in current code.
Leave the tests for the deprecated function in place.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Only some devices support the link state interrupt configuration option.
Link state control does not work in virtual drivers
(virtio, vmxnet3, igbvf, and ixgbevf). Instead of having the application
try and guess whether it will work or not provide a driver flag that
can be checked instead.
Note: if device driver doesn't support link state control, what
would happen previously is that the code would never detect link
transitions. This prevents that.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
[Thomas: rename flag]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The vpmd RX don't accept burst size less than 32.
As vPMD is set =y by default, while default testpmd burst size is 16.
Which will cause RX nothing if not assign burst size correctly.
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Yong Liu <yong.liu@intel.com>
Tested-by: Zhaochen Zhan <zhaochen.zhan@intel.com>
RTE_IXGBE_RX_OLFLAGS_ENABLE gives a hint whick keeping packet type
in RX ol_flags or not.
By default it is set to update ol_flags in RX mbuf header.
If unset it, will gain addtional performance, but will lose packet
type information.
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Yong Liu <yong.liu@intel.com>
Tested-by: Zhaochen Zhan <zhaochen.zhan@intel.com>
Vectorized Rx cannot be enabled if RTE_LIBRTE_IEEE1588=y.
So variable dev is not used in this case.
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Yong Liu <yong.liu@intel.com>
Tested-by: Zhaochen Zhan <zhaochen.zhan@intel.com>
The vpmd RX routine won't be used if RTE_LIBRTE_IXGBE_RX_ALLOW_BULK_ALLOC
is not defined or its condition check fail.
The case RTE_LIBRTE_IXGBE_RX_ALLOC_BULK_ALLOC=n and RTE_IXGBE_INC_VECTOR=y
may exist when choose to use standard RX and optimized TX
(ixgbe_xmit_pkts_vec/ixgbe_xmit_pkts_simple).
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Yong Liu <yong.liu@intel.com>
Tested-by: Zhaochen Zhan <zhaochen.zhan@intel.com>
This was previously solved in commit 60a70d4e04
(fix link status interrupt of bypass device),
but this alternative fix reverts the previous one and solves the
same issue without modifying the base driver (also named "shared code").
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Intel PMDs are built on top of the base drivers which are provided by Intel
and shouldn't be modified to allow easy batch upgrade from Intel.
The base driver is a "shared code" between many projects. But in DPDK,
the "base driver" naming makes more sense.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The support of jumbo frames in the ixgbevf Poll Mode Driver of 10GbE
82599 VF functions consists in the following enhancements:
- Implement the mtu_set function in the ixgbevf PMD, using the IXGBE_VF_SET_LPE
request of the version 1.0 of the VF/PF mailbox API for this purpose.
- Add a detailed explanation on the VF/PF rx max frame len negotiation.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch adds two new functions in ethdev api to retrieve current MTU and
change MTU of a port.
Only .mtu_set function is pmd specific.
pmd should update its max_rx_pkt_len if needed.
This operation has been implemented for rte_em_pmd, rte_igb_pmd and
rte_ixgbe_pmd.
Signed-off-by: Samuel Gauthier <samuel.gauthier@6wind.com>
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
We might want to be sure the scatter packets reception handler is selected in a
pmd. This makes it possible to then change mtu later, without the need of
restarting a port.
It is then the pmd duty to tell it enabled the scatter reception handler by
setting dev->data->scattered_rx to 1.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add autoneg field in flow control parameters.
This makes it easier to understand why changing some parameters does not always
have the expected result.
Changing autoneg is not supported at the moment.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch adds a new function in ethdev api to retrieve current flow control
configuration.
This operation has been implemented for rte_em_pmd, rte_igb_pmd and
rte_ixgbe_pmd.
Signed-off-by: Zijie Pan <zijie.pan@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
- i40e RSS flags have been added (and enlarged to 64-bit)
- A new configuration of 'uint8_t rss_key_len' has been added in
'struct rte_eth_rss_conf' to support different length of RSS keys.
- In each PMD, only the supported flags are masked.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Heqing Zhu <heqing.zhu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Function ixgbe_get_media_type_82599 returns media_type =
ixgbe_media_type_unknown, when using an 82599 Bypass NIC,
so that causes link status interrupt not to work properly.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Split input error stats to have a better understanding of why packets
have been dropped.
Keep ierrors field untouched for backward compatibility.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch adds following ixgbe NIC filters implement:
syn filter, ethertype filter, 5tuple filter for intel NIC 82599
Signed-off-by: jingjing.wu <jingjing.wu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Rename the RTE_PCI_DRV_NEED_IGB_UIO to be more generic.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
New file containing optimized receive and transmit functions which
use 128bit vector instructions to improve performance. When conditions
permit, these functions will be enabled at runtime by the device
initialization routines already in the PMD.
The compilation of the vectorized RX and TX code paths is controlled by
a new setting in the build time configuration for the IXGBE driver. Also
added is a setting which allows an optional further performance increase
by disabling the use of the olflags field on packet RX.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: XiaonanX Zhang <xiaonanx.zhang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: code-style adjustments]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
It is implemented by enabling or disabling TX laser.
Signed-off-by: Ouyang Changchun <changchun.ouyang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
This commit removes trailing whitespace from lines in files. Almost all
files are affected, as the BSD license copyright header had trailing
whitespace on 4 lines in it [hence the number of files reporting 8 lines
changed in the diffstat].
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
[Thomas: remove spaces before tabs in libs]
[Thomas: remove more trailing spaces in non-C files]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch implements queue start and stop functionality in IXGBE PMD;
it also enable hardware loopback for VMDQ mode in IXGBE PMD.
Signed-off-by: Ouyang Changchun <changchun.ouyang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
1) Add a new function "rss_hash_conf_get" in the PMD API to retrieve the
current configuration of the RSS functions and/or of the RSS key used
by a NIC to compute the RSS hash of input packets.
The new function uses the existing data structure "rte_eth_rss_conf" for
returning the RSS hash configuration.
2) Add the ixgbe-specific function "ixgbe_dev_rss_hash_conf_get" and the
igb-specific function "eth_igb_rss_hash_conf_get" to retrieve the RSS
hash configuration of ixgbe and igb controllers respectively.
3) Add the command "show port X rss-hash [key]" in the testpmd application
to display the RSS hash configuration of port X.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
1) Add a new function "rss_hash_update" in the PMD API to dynamically
update the RSS flags and/or the RSS key used by a NIC to compute the RSS
hash of input packets.
The new function uses the existing data structure "rte_eth_rss_conf" for
the argument that contains the new hash flags and/or the new hash key to
use.
2) Add the ixgbe-specific function "ixgbe_dev_rss_hash_update" and the
igb-specific function "eth_igb_rss_hash_update" to update the RSS
hash configuration of ixgbe and igb controllers respectively.
Before changing anything, these 2 functions check that the update RSS
operation does not attempt to disable RSS, if RSS was enabled at port
initialization time, or does not attempt to enable RSS, if RSS was
disabled at port initialization time.
Note:
Configuring the RSS hash flags and the RSS key used by a NIC consists in
updating appropriate PCI registers of the NIC.
These operations have been manually tested with the interactive commands
"write reg" and "write regbit" of the testpmd application.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
When initializing a VF with no initial MAC address assigned by
the underlying Host PF driver, assign a default MAC address.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The VF_RESET message of the 82599 PF/VF communication protocol issued by a
a Guest VF driver may include an optional permanent MAC address assigned to
the VF by the Guest OS, in order to make it recorded into the 82599 RAR
registers by the Host PF driver.
To indicate the absence of this optional MAC address, the VF_RESET command
assumes that a NULL MAC address is sent, instead of using a dedicated bit
for this purpose. However, when sending a VF_RESET command with no permanent
MAC address, the function ixgbe_reset_hw_vf() of the 82599 VF driver
directly invokes the function ixgbe_write_mbx_vf() with a message that does
not include a NULL MAC address, wrongly assuming that this function fills in
with zero all unused mailbox data registers.
More globally, it is safer to explicitely reset to zero all remaining mailbox
data registers that are not used to store the content of a message, in order
to reset the data sent in a previous VF/PF exchange (in either side),
including the last exchange performed by another Guest OS to which that VF
was previously assigned.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
On a 82599 VF, the deletion of a dynamically added MAC address consists in
first flushing all added MAC addresses, then in adding again all remaining MAC
addresses.
For this purpose, the function ixgbevf_remove_mac_addr() parses the pool
of MAC addresses associated with a VF, and must skip the VF permanent MAC
address that is stored into it, as well as all NULL MAC addresses.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
During the initialization of a VF device, the rte_eth_dev_start() function
indirectly invokes the PMD "mac_addr_add" function with the permanent MAC
address assigned to the device.
In the case of 82599 VFs, this operation leads to exhausting the very
limited set of PF resources used to store VF MAC addresses.
To address this issue, do nothing in the function ixgbevf_add_mac_addr()
if the added MAC address is equal to the permanent MAC address of the VF.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
