The base driver is the backend module for the QLogic FastLinQ QL4xxxx
25G/40G CNA family of adapters as well as their virtual functions (VF)
in SR-IOV context.
The purpose of the base module is to:
- provide all the common code that will be shared between the various
drivers that would be used with said line of products. Flows such as
chip initialization and de-initialization fall under this category.
- abstract the protocol-specific HW & FW components, allowing the
protocol drivers to have clean APIs, which are detached in its
slowpath configuration from the actual Hardware Software Interface(HSI).
This patch adds a base module without any protocol-specific bits.
I.e., this adds a basic implementation that almost entirely falls under
the first category.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Fix issue reported by Coverity.
Coverity ID 13193: Bad bit shift operation (BAD_SHIFT)
large_shift: In expression 1 << pool, left shifting by more than 31 bits
has undefined behavior. The shift amount, pool, is at least 32.
This patch is a rework of register addr selection logic and mask
computation to made it more readable and avoid bit overflow when 32 bit
value is shifted over its size for pool > 31.
Fixes: fe3a45fd41 ("ixgbe: add VMDq support")
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The statistics queried by calling rte_eth_stats_get are zero when
the API is first called on the port. The root cause is because the
offset_loaded flag is not set correctly after device start.
This patch fixes this issue by resetting statistics at initialization
time. The resetting process will set offset_loaded flag.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
When building a chain of mbufs for a multi-segment packet, the
packet_type field resides at the end of the chain. It should be
copied forward to the head of the list.
Also, uses RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE to guard packet-type
computation. The mbuf fields are not copied when this define is not set.
Fixes: fe65e1e1ce ("fm10k: add vector scatter Rx")
Signed-off-by: Michael Frasca <michael.frasca@oracle.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
The masking for the RX/TX enable bit was incorrect in the rx and tx
queue stop functions. Instead of using "& MASK" it used "| MASK" which
would always return true. This error was found by converity scan.
CID 13215 : Wrong operator used (CONSTANT_EXPRESSION_RESULT)
operator_confusion: txdctl | 33554432 is always 1/true regardless of the
values of its operand. This occurs as the logical second operand of
'&&'.
CID 13216 : Wrong operator used (CONSTANT_EXPRESSION_RESULT)
operator_confusion: rxdctl | 33554432 is always 1/true regardless of the
values of its operand. This occurs as the logical second operand of
'&&'.
Coverity issue: 13215
Coverity issue: 13216
Fixes: 029fd06d40 ("ixgbe: queue start and stop")
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The position of register values within i40e register dumps is
supposed to reflect the register addresses. These were not being
correctly calculated.
Fixes: d9efd0136a ("i40e: add EEPROM and registers dumping")
Signed-off-by: Remy Horton <remy.horton@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Run ixgbe driver through checkpatch and fix the issues highlighted
Fix line spacing, some bad indentation, and in a couple
of cases use short circuit (already there) return to lessen indentation.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Applied with four additional fixes for issues highlighted by checkpatch
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The header file rte_debug.h makes use of the "unlikely" macro which
means it should include the rte_branch_prediction.h header file.
Fixes: 50705e8e3c ("eal: add assert macro for debug")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The dpdk build system passes -mfloat-abi=softfp, which makes the build fail
when the selected ABI is EABIhf. The dpdk build system should not make
assumptions on the selected ARM ABI.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
The macro RTE_VERIFY always checks a condition.
It is optimized with "unlikely" hint.
While this macro is well suited for test applications, it is preferred
in libraries and examples to enable such check in debug mode.
That's why the macro RTE_ASSERT is introduced to call RTE_VERIFY only
if built with debug logs enabled.
A lot of assert macros were duplicated and enabled with a specific flag.
Removing these #ifdef allows to test these code branches more easily
and avoid dead code pitfalls.
The ENA_ASSERT is kept (in debug mode only) because it has more
parameters to log.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The debug logs must be enabled at compile-time and run-time.
There are also some internal flags in some examples to enable the debug
logs of the applications. They are now enabled in debug configs and
can be disabled thanks to the more generic logtype mechanism:
rte_set_log_type(RTE_LOGTYPE_USER1, 0);
Removing these #ifdef allows to test these code branches more easily
and avoid dead code pitfalls.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The default was to compile every logs (including debug) and set
the default level to debug.
As some debug logs may hurt performance, a notice is added and the
default level is now info.
In order to enable debug logs, they must be compiled with
RTE_LOG_LEVEL=RTE_LOG_DEBUG and enabled at runtime with --log-level=8.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Some relevant EAL logs are raised from debug to info level in order to
show the available number of cores and the detected devices.
The driver ids and name are logged only if the device is not blacklisted.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
While parsing token string there may be several modes:
- fixed single string
- multi-choice single string
- any single string
This patch add one more mode - any multi string.
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Fix issue reported by clang scan-build
Value of pointer tbl_next was uninitialized. When function lookup_step()
take else branch it may provide garbage into tbl = tbl_next;
Fixes: 5c510e13a9 ("lpm: add IPv6 support")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Back then when we fixed the missing free lpm I was to quickly to say yes
if it applies not only to the lpm6 but also to all of the lpm code.
It turned out to not apply to all of them. In rte_lpm_create_v20 there
is an unexpected fused allocation:
mem_size = sizeof(*lpm) + (sizeof(lpm->rules_tbl[0]) * max_rules);
[...]
lpm = (struct rte_lpm_v20 *)rte_zmalloc_socket(mem_name,mem_size,
RTE_CACHE_LINE_SIZE, socket_id);
That causes lpm->rules_tbl not to have an own struct malloc_elem that
can be derived via RTE_PTR_SUB(data, MALLOC_ELEM_HEADER_LEN) in
malloc_elem_from_data.
Due to that the rte_lpm_free_v20 accidentially misderives the elem and
assumes it is ELEM_FREE triggering in malloc_elem_free
if (!malloc_elem_cookies_ok(elem) || elem->state !=
return -1;
While it seems counter-intuitive the way to properly remove rules_tbl in
the old fused allocation style of rte_lpm_free_v20 is to not remove it.
The newer rte_lpm_free_v1604 is safe because in rte_lpm_create_v1604
rules_tbl is a separate allocation.
Fixes: d4c18f0a1d ("lpm: fix missing free")
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
If any fragment hole is found in ipv4_frag_reassemble() and
ipv6_frag_reassemble(), whole ip_frag_pkt mbufs are moved to death-row.
Any mbufs already chained to another mbuf are freed multiple times as
there are still in ip_frag_pkt array.
Signed-off-by: Chaeyong Chong <cychong@gmail.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Although previous implementation returned an error when trying to release
a memzone assigned to an ivshmem device, it stills freed it.
Fixes: cd10c42eb5 ("mem: fix ivshmem freeing")
Signed-off-by: Mauricio Vasquez B <mauricio.vasquezbernal@studenti.polito.it>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
rx_q fifo may have chained mbufs, merge them into single skb before
handing to the network stack.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Currently every time a KNI interface goes up, its ethernet address
is reassigned.
After this patch ethernet address is assigned only once,
at initialization time.
Suggested-by: Sergey Balabanov <balabanovsv@ecotelecom.ru>
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
CID 13307 (#1 of 1): Copy into fixed size buffer (STRING_OVERFLOW)
fixed_size_dest: You might overrun the 128 byte fixed-size string fwd_modes
by copying fwd_eng->fwd_mode_name without checking the length.
Fixes: 769ce6b178 ("app/testpmd: list forwarding engines")
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
It seems that with gcc >5.x and -O2/-O3 optimization breaks packet
grouping algorithm in l3fwd-thread application causing segfault.
When last packet pointer "lp" and "pnum->u64" buffer points the same
memory buffer, high optimization can cause unpredictable results.
It seems that assignment of precalculated group sizes may interfere
with initialization of new group size when lp points value inside
current group and didn't should be changed.
With gcc >5.x and optimization we cannot be sure which assignment will be
done first, so the group size can be counted incorrectly causing segfault.
This patch eliminates intersection of assignment of initial group size
(lp[0] = 1) and precalculated group sizes when gptbl[v].idx < 4.
The same patch was applied for original l3fwd (af1694d94).
Fixes: d48415e1fe ("examples/performance-thread: add l3fwd-thread app")
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
CID: #30688
The operaton may have an undefined behavior or yield to an unexpected result.
In setup_port_lcore_affinities: A bit shift operation has a shift amount
which is too large or has a negative value.
Fixes: af75078fec ("first public release")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Fix issue reported by Coverity.
Coverity ID 13240
This could cause an immediate crash or incorrect computation.
In search_ip5tuples: An expression which may be zero is used
as a divisor in floating-point arithmetic.
divide_by_zero: In expression (long double)tm / pkt,
division by expression pkt which may be zero has undefined behavior.
Fixes: 26c057ab6c ("acl: new test-acl application")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Fix issue reported by Coverity.
Coverity ID 13194
The function returns a value that indicates an error condition. If this
is not checked, the error condition may not be handled correctly.
Fixes: 2f4adfad0a ("vfio: add multiprocess support")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
The function rte_memcpy_func() is used in ARM and PPC implementations
of rte_memcpy().
There are some useless copies in Tile and some ARM branches.
It was also declared without doxygen comment in the generic header.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Changed symbol on NIC overview table from X to Y to help
clarify the indicated features are supported. The X caused
confusion for some readers.
Also, added * character to indicate partially supported
features. This can be used in the future to direct the reader
to more specific details in the individual NIC guides.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
After having removed the deprecated stuff, we can start pushing
new fixes and features in the version 16.07.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Some flags were poisoned after having been removed from EAL and mbuf
in releases 1.8 (b10eef348d, 62814bc2e9) and 2.0 (4769bc5a27).
After several releases, they have probably disappeared from all
applications going to upgrade to DPDK 16.07.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: David Marchand <david.marchand@6wind.com>
The function rte_hash_lookup_multi() was renamed rte_hash_lookup_bulk()
in DPDK 1.4 and was kept as an undocumented alias.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Some statistics were deprecated since release 2.1 (49f386542a).
The last deprecated counter to be used was imcasts.
The VF loopback statistics are also removed as they are used only
in igb and duplicated in extended statistics.
The new counters should be added to extended statistics.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Remy Horton <remy.horton@intel.com>
The driver i40e was using a specific PCI config before the release 16.04.
Since 16.04, it is always enabled in i40e (commit 56465cfaf).
The API has been deprecated in the commit 68f7759382.
The igb_uio implementation has been deprecated in commit b7cf8e155.
The config helper - through igb_uio sysfs entries - is now removed.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Support of PCAP file has been added to rte_port in release 16.04
as NEXT_ABI. It is in the standard ABI of the release 16.07.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The git messages have three parts:
1/ the headline
2/ the explanations
3/ the footer tags
The headline helps to quickly browse an history or catch instantly the
purpose of a commit. Making it short with some consistent wording
allows to easily parse it or match some patterns.
The explanations must give some keys like the reason of the change.
Nothing can be automatically checked for this part, except line length.
The footer contains some tags to find the origin of a bug or who
was working on it.
This script is doing some basic checks mostly on parts 1 and 3.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
These stats will be compiled when adding +debug
to test-build.sh targets:
CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT
CONFIG_RTE_SCHED_COLLECT_STATS
CONFIG_RTE_PORT_STATS_COLLECT
CONFIG_RTE_TABLE_STATS_COLLECT
CONFIG_RTE_PIPELINE_STATS_COLLECT
CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS
CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Fix vhost-kni compile errors because of Linux kernel API changes
- SOCK_ASYNC_WAITDATA renamed to SOCKWQ_ASYNC_WAITDATA
Linux commit id: 9cd3e072
Updated in Linux kernel 4.4
- sk_alloc() gets new parameter
Linux commit id: 11aa9c28b
Updated in Linux kernel 4.2
New parameter is: "@kern: is this to be a kernel socket?"
Reported-by: Chintu Hetam <rometoroam@gmail.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Fixes the buffer overflow that occurs due to following;
1. When the input packet burst does not meet the conditions: (a) being
contiguous (first n bits set in pkts_mask, all the other bits cleared)
and (b) containing a full burst, i.e. at least tx_burst_sz packets
(n >= tx_burst_size). This is the slow(er) code path taken when local
variable expr != 0.
2. There are some packets already in the buffer.
3. The number of packets in the incoming burst (i.e. popcount(pkts_mask))
plus the number of packets already in the buffer exceeds the buffer size
(RTE_PORT_IN_BURST_SIZE_MAX, i.e. 64).
Fixes: bf6931b242 ("port: ring")
Fixes: 5f4cd47309 ("port: add ring writer nodrop")
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add a new section on tested platforms and nics to the release notes.
Signed-off-by: Qian Xu <qian.q.xu@intel.com>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
With LIBRTE_PMD_XENVIRT enabled testpmd is built in a way to ONLY work
in XEN environments.
It will surface as:
PMD: gntalloc: ioctl error
EAL: Error - exiting with code: 1
Cause: Creation of mbuf pool for socket 0 failed
With LIBRTE_PMD_XENVIRT enabled this now tries the xen style grant
table allocation, but falls back gracefully for the normal allocation.
The only thing left in the log will be the
PMD: gntalloc: ioctl error
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Coverity ID 13289: Resource leak:
The system resource will not be reclaimed and reused,
reducing the future availability of the resource.
In pci_vfio_get_group_fd: Leak of memory or pointers to system resources
Fixes: ff0b67d1c8 ("vfio: DMA mapping")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
vm_power_manager utilize libvirt API virDomainGetVcpuPinInfo to
retrieve domU vcpu information. This API is implemented from version 0.9.3.
Suse11 SP3 32bit default libvirt version is 0.8.8.
examples/vm_power_manager/channel_manager.c:
channel_manager.c:117:3: error: implicit declaration of function
'virDomainGetVcpuPinInfo'
Check and skip it from examples or raise an error when trying to compile
without libvirt or with a too old libvirt.
Fixes: e8ae9b662 ("examples/vm_power: channel manager and monitor in host")
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The mempool element size is set to 0, but 4 bytes are written in
my_obj_init():
uint32_t *objnum = obj;
memset(obj, 0, mp->elt_size);
*objnum = i;
Change the MEMPOOL_ELT_SIZE constant to sizeof(uint32_t). This fixes
memory corruptions since we were writing outside of the object
boundaries.
Fixes: 104a92bd02 ("app: add reentrancy tests")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
