This patch add support for dpni object support in MC driver.
DPNI represent a network interface object in DPAA2.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
When TSO is disabled we still have to calculate partial checksum if DF bit
if turned off. This is caused by firmware bug.
First of all, we must make sure that we are dealing with IPV4 packet.
If not, we will just skip further checking of this packet and move to
the next one.
If application will not set m2_len field, we assume we that it was Ethernet
frame because we have to look inside the packet to check for the DF flag.
To make it work properly, PMD is assuming that before sending
packet application called function rte_eth_tx_prepare().
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Jakub Palider <jpalider@gmail.com>
Acked-by: Jan Medala <jan.medala@outlook.com>
If wrong number of descriptors for refilling was passed to the Rx
repopulate function, there was memory leak which caused memory pool to
run out of resources in longer go.
In case of fail when refilling Rx descriptors, all additional mbufs
have to be released.
Fixes: 1173fca25af9 ("ena: add polling-mode driver")
Cc: stable@dpdk.org
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Jakub Palider <jpalider@gmail.com>
Acked-by: Jan Medala <jan.medala@outlook.com>
On RX path, after receiving bunch of packets, variable tracking
available descriptors in HW queue was not updated.
To fix this issue, variable tracking used descriptors must be updated
after receiving packets - it must be reduced by the amount of received
descriptors in current batch.
Additionally, variable next_to_clean in rx_ring must be updated before
entering ena_populate_rx_queue() to keep it up to date with the current
ring state.
Fixes: 1daff5260ff8 ("net/ena: use unmasked head and tail")
Cc: stable@dpdk.org
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Jakub Palider <jpalider@gmail.com>
Acked-by: Jan Medala <jan.medala@outlook.com>
When application tried to allocate 1024 descriptors, device was not
initializing properly.
This patch solves it by avoiding allocation of all descriptors in the
ring in one attempt. At least one descriptor must remain unused in the
HW ring.
Fixes: 1173fca25af9 ("ena: add polling-mode driver")
Cc: stable@dpdk.org
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Jakub Palider <jpalider@gmail.com>
Acked-by: Jan Medala <jan.medala@outlook.com>
Expose additional fpga status registers.
Report hardware status during PMD init.
Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
Acked-by: John Miller <john.miller@atomicrules.com>
Time stamp was carried in the packet meta data, but not
place in the mbuf. The new time stamp field is the proper
destination.
Remove the setting of data offset since this is done by
rte_pktmbuf_free()
Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
Acked-by: John Miller <john.miller@atomicrules.com>
Removing this check improves performance as VLAN and CRC stripping are
enabled most of the time.
Convert MLX5_CQE_VLAN_STRIPPED to network order to speed up the check
instead of doing it on the completion queue entry field.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Trying to assign more queues to stats struct break only from one loop
when the maximum size is reached. Outside loop iteration is continued.
This leads to access an array out of bounds.
Fixes: 21e3fb0050b9 ("net/thunderx: add final bits for secondary queue support")
Cc: stable@dpdk.org
Signed-off-by: Marcin Wilk <marcin.wilk@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Create a new file rte_pmd_ixgbe.c for all the private
APIs. Move all the related code to the new file.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
To keep consistent with previous release, Priority Flow Control (PFC)
need to be disabled by default. This patch fixes it.
This also fixes an issue where traffic was not forwarded by testpmd
occasionally. In those cases ~4770 pps seen on one of the ports rather
than the full rate (>20mpps).
Fixes: 6f0a707e5b55 ("net/i40e: enable DCB on SRIOV VFs")
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
There are some new PCTYPEs on X722, but they have not been announced
on the RTE lib, so if it can not set corresponding hash input set for
these packet type, the hash function won’t work.
So we need to handle them base on the translation of the new
PCTYPE and the original PCTYPE.
Fixes: b6a0ec418274 ("i40e: use AQ for Rx control register read/write")
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Remove initialization of next and nb_segs mbuf fields in the Rx path
since they are now initialized in the mbuf pool.
See commit 8f094a9ac5d7 ("mbuf: set mbuf fields while in pool").
Signed-off-by: John Daley <johndale@cisco.com>
The base code was using native GCC macros
for endian detection. Change to portable
rte_byteorder.h based endian detection.
Fixes: 262d43fe20ee ("net/thunderx/base: add HW register definitions")
Suggested-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Having packets received without any offload flags given in the mbuf is not
very useful, and performance tests with testpmd indicates little
benefit is got with the current code by turning off the flags. This makes
the build-time option pointless, so we can remove it.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
With the mbuf rework, we now have 8 contiguous bytes to be rearmed in the
mbuf just before the 8-bytes of olflags. If we don't do the rearm write
inside the descriptor ring replenishment function, and delay it to
receiving the packet, we can do a single 16B write inside the RX function
to set both the rearm data, and the flags together.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Porting two changes from x86 SSE implematation.
net/i40e: fix checksum flag in x86 vector Rx
net/i40e: eliminate mbuf write on rearm
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
Having packets received without any offload flags given in the mbuf is not
very useful, and performance tests with testpmd indicates little to no
benefit is got with the current code by turning off the flags. This makes
the build-time option pointless, so we can remove it.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jianbo Liu <jianbo.liu@linaro.org>
With the mbuf rework, we now have 8 contiguous bytes to be rearmed in the
mbuf just before the 8-bytes of olflags. If we don't do the rearm write
inside the descriptor ring replenishment function, and delay it to
receiving the packet, we can do a single 16B write inside the RX function
to set both the rearm data, and the flags together.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jianbo Liu <jianbo.liu@linaro.org>
Initialize mail box command to request VF FLR. Data field was
uninitialized before as it was not required and caused the following
error during scan.
Coverity issue: 1384518
Fixes: cdb166963cae ("net/liquidio: add API for VF FLR")
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
When PF notify link speed to VF, encode of link speed need to
be converted from ETH_SPEED_XXX to I40E_LINK_SPEED_XXX.
Fixes: bb6722fb5c0e ("net/i40e: fix VF bonded device link down")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Make i40e_notify_all_vfs_link_status as a wrapper of
i40e_notify_vf_link_status so duplicate code can be removed.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
The eth keyword only should be accepted.
Fixes: d37705068ee8 ("net/i40e: parse QinQ pattern")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
mbuf next is equal to NULL, nb_segs and reference counter are equal to 1
when mbuf is obtained from mempool.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
* Core TX packet moving functions
* Flesh out ark_adapter struct to support TX code
(not all fields used at this patch)
Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
Provide C-level interface for Arkville's internal HW resources
DDM (Downstream Data Mover) and UDM (Upstream Data Mover) modules
Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
Enable Arkville on supported configurations
Add overview documentation
Minimum driver support for valid compile
Arkville PMD is not supported on ARM or PowerPC at this time
Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
Signed-off-by: John Miller <john.miller@atomicrules.com>
function i40evf_add_del_all_mac_addr without check return
value of rte_zmalloc
Fixes: 97ac72aa71a9 ("i40e: support setting VF MAC address")
Cc: stable@dpdk.org
Signed-off-by: Henry Cai <caihe@huawei.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Check return value of malloc.
Fixes: 3bd122eef2cc ("cxgbe/base: add hardware API for Chelsio T5 series adapters")
Cc: stable@dpdk.org
Signed-off-by: Henry Cai <caihe@huawei.com>
Acked-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
build error:
.../drivers/net/xenvirt/rte_eth_xenvirt.c:676:9:
error: ‘struct rte_eth_dev’ has no member named ‘driver’
eth_dev->driver = NULL;
^~
ethdev driver removed, removing assignment to it to fix the build error
Fixes: 9dca21fb80b6 ("ethdev: remove ethdev driver")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
This moves the rte_eth_copy_pci_info() into the PCI specific ethdev
header. As a side effect this also removes it from the list of symbols
exported by the rte_ethdev library.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
This removes the now unused struct eth_driver.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
There is no need to export this API. Remaining users should use the
rte_eal_vdev_init() function instead.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
