Implement "mac_addr_set" op and mark "Unicast MAC filter" feature as "P"
as "mac_addr_add" and "mac_addr_remove" are not implemented.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Mark Basic stats support in features.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Mark Promiscuous mode in features.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Mark Link status in features.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
mark Jumbo frame, CRC offload support in features.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Create ethdev ports by registering withethdev subsystem based on
"nr_port" vdev argument or maximum physical ports available in the system.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
An octeontx ethdev device consists of multiple PKO VF devices, a PKI
VF device and multiple SSOVF devices which shared between eventdev.
This patch adds a vdev based device called "eth_octeontx" which
will create multiple ethernet ports based on "nr_port" or maximum
physical ports are available in the system.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
PKO is the packet output processing unit, which receives the packet
from the core and sends to the BGX interface. This patch adds the
basic PKO operation like open, close, start and stop. These operations
are implemented through mailbox messages and kernel PF driver being the
server to process the message with the logical port identifier.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Adding remaining PKI operations and sync up the mailbox
definitions with PF driver.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
PKI is packet input unit, which receives the packet from the
BGX interface. This patch adds the basic PKI operation like
open, close, start and stop. These operations are implemented through
mailbox messages and kernel PF driver being the server to process the
message with the logical port identifier.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
An octeontx ethdev device consists of multiple PKO VF devices and an PKI
VF device. On Octeontx HW, each Rx queues are enumerated as SSOVF device
which is exposed as event_octeontx device, Tx queues are enumerated as
PKOVF device, and ingress packet configuration is accomplished through
PKIVF device.
In order to expose as an single ethdev instance, On PCIe VF probe,
the driver stores the information associated with the PCIe VF device and
later with vdev infrastructure creates ethdev device with earlier
probed PCIe VF device.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
BGX is an HW MAC interface. This patch adds the basic BGX operation like
open, close, start and stop. These operations are implemented through
mailbox messages and kernel PF driver being the server to process the
message with the physical port identifier.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Some of the internal toolchain versions create unaligned
memory access fault when copying from 17-31B buffer using memcpy.
Subsequent patches in this series will be using 17-31B mbox message.
Since the mailbox message copy comes in slow path, changing memcpy to
byte-per-byte copy to workaround the issue.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Adding octeontx specific io operations. Added a stub for building
against non octeontx targets.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Currently, testpmd just allows to query the RETA info only when the
required size equals to configured RETA size.
This patch allows to query any RETA size <= the configured size. This
helps when the RETA size is big (say 512) and when I just want to peak
few RETA entries.
Signed-off-by: Yuanhan Liu <yliu@fridaylinux.org>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add programmer's guide doc to explain the design and use of the
GSO library.
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch adds GSO support to the csum forwarding engine. Oversized
packets transmitted over a GSO-enabled port will undergo segmentation
(with the exception of packet-types unsupported by the GSO library).
GSO support is disabled by default.
GSO support may be toggled on a per-port basis, using the command:
"set port <port_id> gso on|off"
The maximum packet length (including the packet header and payload) for
GSO segments may be set with the command:
"set gso segsz <length>"
Show GSO configuration for a given port with the command:
"show port <port_id> gso"
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch adds GSO support for GRE-tunneled packets. Supported GRE
packets must contain an outer IPv4 header, and inner TCP/IPv4 headers.
They may also contain a single VLAN tag. GRE GSO doesn't check if all
input packets have correct checksums and doesn't update checksums for
output packets. Additionally, it doesn't process IP fragmented packets.
As with VxLAN GSO, GRE GSO uses a two-segment MBUF to organize each
output packet, which requires multi-segment mbuf support in the TX
functions of the NIC driver. Also, if a packet is GSOed, GRE GSO reduces
its MBUF refcnt by 1. As a result, when all of its GSOed segments are
freed, the packet is freed automatically.
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch adds a framework that allows GSO on tunneled packets.
Furthermore, it leverages that framework to provide GSO support for
VxLAN-encapsulated packets.
Supported VxLAN packets must have an outer IPv4 header (prepended by an
optional VLAN tag), and contain an inner TCP/IPv4 packet (with an optional
inner VLAN tag).
VxLAN GSO doesn't check if input packets have correct checksums and
doesn't update checksums for output packets. Additionally, it doesn't
process IP fragmented packets.
As with TCP/IPv4 GSO, VxLAN GSO uses a two-segment MBUF to organize each
output packet, which mandates support for multi-segment mbufs in the TX
functions of the NIC driver. Also, if a packet is GSOed, VxLAN GSO
reduces its MBUF refcnt by 1. As a result, when all of its GSO'd segments
are freed, the packet is freed automatically.
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch adds GSO support for TCP/IPv4 packets. Supported packets
may include a single VLAN tag. TCP/IPv4 GSO doesn't check if input
packets have correct checksums, and doesn't update checksums for
output packets (the responsibility for this lies with the application).
Additionally, TCP/IPv4 GSO doesn't process IP fragmented packets.
TCP/IPv4 GSO uses two chained MBUFs, one direct MBUF and one indrect
MBUF, to organize an output packet. Note that we refer to these two
chained MBUFs as a two-segment MBUF. The direct MBUF stores the packet
header, while the indirect mbuf simply points to a location within the
original packet's payload. Consequently, use of the GSO library requires
multi-segment MBUF support in the TX functions of the NIC driver.
If a packet is GSO'd, TCP/IPv4 GSO reduces its MBUF refcnt by 1. As a
result, when all of its GSOed segments are freed, the packet is freed
automatically.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Generic Segmentation Offload (GSO) is a SW technique to split large
packets into small ones. Akin to TSO, GSO enables applications to
operate on large packets, thus reducing per-packet processing overhead.
To enable more flexibility to applications, DPDK GSO is implemented
as a standalone library. Applications explicitly use the GSO library
to segment packets. To segment a packet requires two steps. The first
is to set proper flags to mbuf->ol_flags, where the flags are the same
as that of TSO. The second is to call the segmentation API,
rte_gso_segment(). This patch introduces the GSO API framework to DPDK.
rte_gso_segment() splits an input packet into small ones in each
invocation. The GSO library refers to these small packets generated
by rte_gso_segment() as GSO segments. Each of the newly-created GSO
segments is organized as a two-segment MBUF, where the first segment is a
standard MBUF, which stores a copy of packet header, and the second is an
indirect MBUF which points to a section of data in the input packet.
rte_gso_segment() reduces the refcnt of the input packet by 1. Therefore,
when all GSO segments are freed, the input packet is freed automatically.
Additionally, since each GSO segment has multiple MBUFs (i.e. 2 MBUFs),
the driver of the interface which the GSO segments are sent to should
support to transmit multi-segment packets.
The GSO framework clears the PKT_TX_TCP_SEG flag for both the input
packet, and all produced GSO segments in the event of success, since
segmentation in hardware is no longer required at that point.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The GRO library provides two modes to reassemble packets. Currently, the
csum forwarding engine has supported to use the lightweight mode to
reassemble TCP/IPv4 packets. This patch introduces the heavyweight mode
for TCP/IPv4 GRO in the csum forwarding engine.
With the command "set port <port_id> gro on|off", users can enable
TCP/IPv4 GRO for a given port. With the command "set gro flush <cycles>",
users can determine when the GROed TCP/IPv4 packets are flushed from
reassembly tables. With the command "show port <port_id> gro", users can
display GRO configuration.
The GRO library doesn't re-calculate checksums for merged packets. If
users want the merged packets to have correct IP and TCP checksums,
please select HW IP checksum calculation and HW TCP checksum calculation
for the port which the merged packets are transmitted to.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Change loop counter that should be based on the number
of rx queues, not tx queues. This only affects debug
output.
Fixes: 727b3fe292 ("net/ark: integrate PMD")
Cc: stable@dpdk.org
Signed-off-by: John Miller <john.miller@atomicrules.com>
During a link down event of a port participating in a LACP 802.3ad
bond the current behavior can cause all ports to be deselected
and temporarily stop all traffic on the bond, causing unexpected
traffic loss across all ports and not just the port which was
affected by the link down event.
Fixes: 46fb436836 ("bond: add mode 4")
Cc: stable@dpdk.org
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
The compilation with gcc-6.3.0 and EXTRA_CFLAGS=-Og gives the following
error:
CC virtio_rxtx.o
virtio_rxtx.c: In function ‘virtio_rx_offload’:
virtio_rxtx.c:680:10: error: ‘csum’ may be used uninitialized in
this function [-Werror=maybe-uninitialized]
csum = ~csum;
~~~~~^~~~~~~
The function rte_raw_cksum_mbuf() may indeed return an error, and
in this case, csum won't be initialized. Fix it by initializing csum
to 0.
Fixes: 96cb671193 ("net/virtio: support Rx checksum offload")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add operations that are safe for secondary processes:
* (x)stats
* device info get
* rx/tx descriptor status
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
PMD uses Verbs object which were not available in the shared memory.
This patch modify the location where Verbs objects are allocated (from
process memory address space to shared memory address space) and thus
allow a secondary process to use those object by mapping this shared
memory space its own memory space.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Use a unix socket to get back the communication channel with the Kernel
driver from the primary process, this is necessary to remap those pages
in the secondary process memory space and thus use the same Tx queues.
This is only supported from rdma-core (v15).
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
rte_eth_dev created by primary process were not available in secondary
process, it was not possible to use the primary process local memory
object from a secondary process.
This patch modify the reference of primary rte_eth_dev object, use
local rte_eth_dev secondary process instead.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
We need to set vf mac from the host, so that they will be in sync on the
guest and the host. Otherwise, we'll have a random mac on the guest, and
a 00:00:00:00:00:00 mac on the host.
Signed-off-by: David Hunt <david.hunt@intel.com>
Reviewed-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Here we're adding an example of setting up a policy, and allowing the
vm_cli_guest app to send it to the host using the cli command
"send_policy now"
Signed-off-by: Nemanja Marjanovic <nemanja.marjanovic@intel.com>
Signed-off-by: Rory Sexton <rory.sexton@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
Reviewed-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Adding new wrapper function to existing private (but unused 'till now)
function with an rte_power_ prefix.
The plan is to clean up all the header files in the next release so
that only the intended public functions are in the map file and only
the relevant headers have the rte_ prefix so that only they are
included in the documentation.
Signed-off-by: David Hunt <david.hunt@intel.com>
Reviewed-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
We need to initialise the port's we're monitoring to be able to see
the throughput.
Signed-off-by: Nemanja Marjanovic <nemanja.marjanovic@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
Reviewed-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Need a way to convert a VF id to a PF id on the host so as to query the
PF for relevant statistics which are used for the frequency changes in
the vm_power_manager app.
Used when profiles are passed down from the guest to the host, allowing
the host to map the VFs to PFs.
Signed-off-by: Nemanja Marjanovic <nemanja.marjanovic@intel.com>
Signed-off-by: Rory Sexton <rory.sexton@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
Reviewed-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Bus scan is responsible for finding devices over *all* buses.
Some of these buses might not be able to scan but that should
not prevent other buses to be scanned.
Same is the case for probing. It is possible that some devices which
were scanned didn't have a specific driver. That should not prevent
other buses from being probed.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
64bit load and store will be an atomic operation on all the
64bit processors.
Change RTE_ARCH_X86_64 to RTE_ARCH_64 to reflect the case.
Fixes: 9b15ba895b ("timer: use a skip list")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The rte_timer_reset function should be able to register timers on service
lcores as they are EAL threads.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
This function can be used to check the role of a specific lcore.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
GCC does have the __get_cpuid_count builtin which checks for maximum
supported leaf, but implementations differ between CLANG and GCC.
This change provides an implementation compatible with both GCC and
CLANG 3.4+.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When compiling with clang extra warning flags, such as used by default with
meson, a warning is given in iotlb.c:
lib/librte_vhost/iotlb.c:318:6: warning:
variable 'socket' is used uninitialized whenever
'if' condition is false [-Wsometimes-uninitialized]
This is a false positive, as the socket value will be initialized by the
call to get_mempolicy in the case where the NUMA build-time flag is set,
and in cases where it is not set, "if (ret)" will always be true as ret is
initialized to -1 and never changed.
However, this is not immediately obvious, and is perhaps a little fragile,
as it will break if other code using ret is subsequently added above the
call to get_mempolicy by someone unaware of this subtle dependency.
Therefore, we can fix the warning and making the code more robust by
explicitly initializing socket to zero, and moving the extra condition
check on the return from get_mempolicy() into the #ifdef
Fixes: d012d1f293 ("vhost: add IOTLB helper functions")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
