Now we need to add prefix like lib. to enable the log,
also changing val 8 to "debug"" which would be more descriptive.
Fixes: ffb9fd1b08 ("log: update legacy modules dynamic logs regex")
Cc: stable@dpdk.org
Reported-by: Haiyue Wang <haiyue.wang@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add some new types, such as eth/l2-src-only/l2-dst-only/svlan/cvlan/
l2tpv3/esp/ah/pfcp types into RSS hash commands, it could be used
to configure these rss input set by cmdline.
Example flow commands was:
testpmd>flow create 0 ingress pattern eth / ipv4 / l2tpv3oip / end \
actions rss types l2tpv3 end key_len 0 queues end / end
port config commands was:
testpmd>port config all rss l2tpv3
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The VF must be capable of configuring RSS. Add a virtchnl handler to
parse a specific RSS configuration, and process the configuration for
VFs, such as add or delete a RSS rule.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
One of the reasons to destroy a flow is the fact that no packet matches
the flow for "timeout" time.
For example, when TCP\UDP sessions are suddenly closed.
Currently, there is not any DPDK mechanism for flow aging and the
applications use their own ways to detect and destroy aged-out flows.
The flow aging implementation need include:
- A new rte_flow action: RTE_FLOW_ACTION_TYPE_AGE to set the timeout and
the application flow context for each flow.
- A new ethdev event: RTE_ETH_EVENT_FLOW_AGED for the driver to report
that there are new aged-out flows.
- A new rte_flow API: rte_flow_get_aged_flows to get the aged-out flows
contexts from the port.
- Support input flow aging command line in Testpmd.
The new event type addition in the enum is flagged as an ABI breakage,
so an ignore rule is added for these reasons:
- It is not changing value of existing types (except MAX)
- The new value is not used by existing API if the event is not
registered
In general, it is safe adding new ethdev event types at the end of the
enum, because of event callback registration mechanism.
Signed-off-by: Dong Zhou <dongz@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This patch adds FDIR create/destroy/validate function in AVF.
Common pattern and queue/qgroup/passthru/drop actions are supported.
Signed-off-by: Simei Su <simei.su@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
This patch allows to display flow stats in extended stats.
To do this, DMA-able memory is registered with the FW during device
initialization. Then the driver uses an alarm thread to query the
per flow stats using the HWRM_CFA_COUNTER_QSTATS HWRM command at
regular intervals and stores it locally which will be displayed
when the application queries the xstats.
The DMA-able memory is unregistered during driver cleanup.
This functionality can be enabled using the flow-xstat devarg and
will be disabled by default. The intention behind this is to allow
stats to be displayed for all the flows in one shot instead of
querying one at a time.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
HWRM API allows drivers to query stats per PCI function.
These stats can provide some useful information in certain
circumstances.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
virtio driver already parses speed devarg. virtio-user should add
it to list of valid devargs and call eth_virtio_dev_init function
which init speed value.
eth_virtio_dev_init already is called from virtio_user_pmd_probe
function. The only change is required to enable speed devargs:
adding speed to list of valid devargs.
Signed-off-by: Ivan Dyukov <i.dyukov@samsung.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Some applications like pktgen use link speed to calculate
transmission rate. It limits outcome traffic to hardcoded 10G.
This patch adds speed devarg which allows to configure
link speed of virtio device.
Signed-off-by: Ivan Dyukov <i.dyukov@samsung.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add memory pre-allocation note for vhost example when enabling
"builtin-net-driver".
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add ESP patterns to i40e_flow_parse_rss_pattern().
Update i40e PMD user guide with download link for esp-ah.pkg file.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Support rte_flow RSS action on outer headers (level 0). RSS ranges on
the non-default port is OK.
Restrictions:
- The RETA is ignored. The hash function is simply applied across
the RSS queue range.
- The queues used in the RSS group must be sequential.
- There is a performance hit if the number of queues is not a power
of 2.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
Define a device parameter to configure log 2 of a stride size for MPRQ
- mprq_log_stride_size. User is able to specify a stride size in a range
allowed by an underlying hardware. The default stride size is defined as
2048 bytes to encompass most commonly used packet sizes in the Internet
(MTU 1518 and less) and will be used in case a maximum configured packet
size cannot fit into the largest possible stride size. Otherwise a
stride size is set to a large enough value to encompass a whole packet.
Cc: stable@dpdk.org
Signed-off-by: Alexander Kozyrev <akozyrev@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Setup NIC to generate MSI-X interrupts.
Set the IVAR register to map interrupt causes to vectors.
Implement interrupt enable/disable functions.
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Added vHost PMD arguments 'linear-buffer' and 'ext-buffer'
to configure 'RTE_VHOST_USER_LINEARBUF_SUPPORT' and
'RTE_VHOST_USER_EXTBUF_SUPPORT' flags in the vhost library
Signed-off-by: Sivaprasad Tummala <sivaprasad.tummala@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add an new device argument 'no-rx', which will prevent PMD receiving
packets.
This is useful for testing when a PMD is needed only to send packets to.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch added iavf_flow_create, iavf_flow_destroy,
iavf_flow_flush and iavf_flow_validate support,
these are used to handle all the generic filters.
This patch supported basic L2, L3, L4 and GTPU patterns.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
As AWS metal instances are supporting IOMMU, the usage of igb_uio or
vfio-pci can lead to a problems (when to use which module), especially
that the vfio-pci isn't supporting SMMU on arm64.
To clear up the problem of using those modules in various setup
conditions (with or without IOMMU) on metal instances, more detailed
explanation was added.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Some ENA devices can pass to the driver descriptor with length 0. To
avoid extra allocation, the descriptor can be reused by simply putting
it back to the device.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
In the LLQ (Low-latency queue) mode, the device can indicate that meta
data descriptor caching is disabled. In that case the driver should send
valid meta descriptor on every Tx packet.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
ENA device can report in the AENQ handler amount of Tx packets that were
dropped and not sent.
This statistic is showing global value for the device and because
rte_eth_stats is missing field that could indicate this value (it
isn't the Tx error), it is being presented as a extended statistic.
As the current design of extended statistics prevents tx_drops from
being an atomic variable and both tx_drops and rx_drops are only updated
from the AENQ handler, both were set as non-atomic for the alignment.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Default LLQ (Low-latency queue) maximum header size is 96 bytes and can
be too small for some types of packets - like IPv6 packets with multiple
extension. This can be fixed, by using large LLQ headers.
If the device supports larger LLQ headers, the user can activate them by
using device argument 'large_llq_hdr' with value '1'.
If the device isn't supporting this feature, the default value (96B)
will be used.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Update driver/firmware/package version for DPDK20.02
Signed-off-by: Zhaoyan Chen <zhaoyan.chen@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Enable source MAC address and destination MAC address as FDIR's
input set for ipv4-other, ipv4-udp and ipv4-tcp. When OVS-DPDK is
working as a pure L2 switch, enable MAC address as FDIR input set
with Mark+RSS action would help the performance speed up. And FVL
FDIR supports to change input set with MAC address.
Signed-off-by: Lunyuan Cui <lunyuanx.cui@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
In order that all queues of pools can receive packets,
add enable-rss argument to change RSS configuration.
Fixes: 6bb97df521 ("examples/vmdq: new app")
Cc: stable@dpdk.org
Signed-off-by: Junyu Jiang <junyux.jiang@intel.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Tested-by: Yingya Han <yingyax.han@intel.com>
Currently, there is no documentation for VMDq example,
this path added the user guide for VMDq.
Signed-off-by: Junyu Jiang <junyux.jiang@intel.com>
Reviewed-by: Jingjing Wu <jingjing.wu@intel.com>
Introduce new command to dump memory statistics of each socket,
summary, also show changes since last call.
Usage:
dump_socket_mem
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
DCF on CVL is a control plane VF which take the responsibility to
configure all the PF/global resources, this patch add support DCF
on to program forward rule to direct packets to VFs.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds SDP packet parsing support with custom L2 header,
adds support to include a field from custom header for flow tag
generation.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add Traffic Management capability callbacks to provide
global, level and node capabilities. This patch also
adds documentation on Traffic Management Support.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add Tx queue ratelimiting support. This support is mutually
exclusive with TM support i.e when TM is configured, tx queue
ratelimiting config is no more valid.
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
This patch implements rx/tx checksum offload. In case of
wrong checksum received (inner/outer l3/l4) it reports the
corresponding layer which has bad checksum and also corrects
it if hw checksum is enabled on tx side.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Adding support for setting link up/down eth operation.
It is used to enable disable lmac. Also implemented a
poll function for getting the link status at regular
intervals.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Patch adds support for vlan filter offload support.
MBOX messages for vlan filter on/off and vlan filter
entry add/rm are added to configure PCAM entries to
filter out the vlan traffic on a given port.
Patch also defines rx_offload_flag for vlan filtering.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Harman Kalra <hkalra@marvell.com>
Adding multi segment support to the octeontx PMD. Also
adding the logic to share rx/tx ofloads with the eventdev
code.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
