Generate a dependency file for the header files used in the API guide
so that the docs can be rebuilt if a header changes.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
For the doxygen API for the examples folder, we can generate a build
dependency file when we generate the examples.dox file. This allows
correct rebuilds if the files in examples change.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Changed the rte_ring chapter in programmer's guide to reflect
the addition of rte_ring_xxx_elem APIs. References to pointers
as ring elements is changed to generic term 'objects'.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Added introduction of rte_ring_xxx_elem APIs to release notes.
Fixes: cc4b218790 ("ring: support configurable element size")
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Service core mask should be a hexadecimal value rather than a range of
lcores.
Bugzilla ID: 392
Fixes: 55499896d9 ("doc: add event mode to l3fwd guide")
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Added support for API rte_eth_tx_done_cleanup.
Added support setting VF MAC address by PF driver.
Added support for setting the link to specific speed.
Fixes: 26e9c3e201 ("net/ixgbe: cleanup Tx buffers")
Fixes: 3c42701875 ("net/ixgbe: support VF MAC address add/remove")
Fixes: 34e7360960 ("net/ixgbe: set fixed flag for exact link speed")
Signed-off-by: Jiaqi Min <jiaqix.min@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Added support for API rte_eth_tx_done_cleanup.
Fixes: ab7cfe1fe3 ("net/ice: cleanup Tx buffers")
Signed-off-by: Jiaqi Min <jiaqix.min@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Added support for API rte_eth_tx_done_cleanup.
Added support for VF multiple queues interrupt.
Added support for setting the link to specific speed.
Fixes: 6a8defc552 ("net/i40e: cleanup Tx buffers")
Fixes: 40163f9e17 ("net/i40e: fix multi-queue Rx interrupt for VF")
Fixes: dc73db27bb ("net/i40e: set fixed flag for exact link speed")
Signed-off-by: Jiaqi Min <jiaqix.min@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add release notes for the notification data feature of virtio-PMD.
Fixes: 7e72f3ec1a ("net/virtio: support packed ring notification data")
Signed-off-by: Cheng Jiang <cheng1.jiang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The libibverbs (and libmlx4/5) can be statically embedded
in the shared PMD library, or in the application with the static PMD.
It was supported with make build system in
commit 2c0dd7b69f ("config: add static linkage of mlx dependency").
The same feature is enabled with meson when using pkg-config
(i.e. only if the call to dependency() is successful).
The fallback method for searching library with cc.find_library()
is not supported because the dependencies of the found library
would not be linked (no such info in .a file unlike .so).
The main difference, in meson build system, is the generated .pc file
giving arguments to link DPDK with the application.
Unfortunately the .pc file will not keep memory of the static linkage
option for libibverbs.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
In current version, we are setting the ports
using portmask. With portmask, we can use only
up to 64 ports. This portlist option enables the user
to use more than 64 ports.
Now we can specify the ports in 2 different ways
- Using portmask (-p [0x]nnn): mask must be in hex format
- Using portlist in the following format
--portlist <p1>[-p2][,p3[-p4],...]
--portmask 0x2 is same as --portlist 1
--portmask 0x3 is same as --portlist 0-1
Signed-off-by: Hariprasad Govindharajan <hariprasad.govindharajan@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Herakliusz Lipiec <herakliusz.lipiec@intel.com>
Currently MLX5 PMD can't match on untagged packets specifically.
Tagged traffic still hits the flows intended for untagged packets.
If the flow has ETH, it will catch all matching packets, tagged
and untagged.
The solution is to use cvlan_tag bit.
If mask=1 and value=0 it matches on untagged traffic.
If mask=1 and value=1 it matches on tagged traffic.
This is the kernel implementation.
This patch updated MLX5 PMD to set cvlan_tag mask and value according
to flow rule contents.
This update is relevant when using DV flow engine (dv_flow_en=1).
See example at https://doc.dpdk.org/guides/nics/mlx5.html#limitations.
Fixes: fc2c498ccb ("net/mlx5: add Direct Verbs translate items")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Split recommended mapping table for X710/XL710/XXV710 and X722,
since they have different firmware versions.
Signed-off-by: Zhaoyan Chen <zhaoyan.chen@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
This commit adds release notes and updates documentation for
the cycle-count mode added to the compression performance tool.
Fixes: 2695db95a1 ("test/compress: add cycle-count mode to perf tool")
Signed-off-by: Artur Trybula <arturx.trybula@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Updated release notes for the changes done in QAT for DPDK 20.02
Original commits for these features are as follows.
Fixes: 026f21c0b9 ("common/qat: support dual threads for enqueue/dequeue")
Fixes: 6cde900bd5 ("common/qat: remove tail write coalescing")
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
The word "major" was used to differentiate with release candidates
or stable maintenance releases.
However the word "major" can be understood as "LTS",
so it is less confusing to avoid this word.
Reported-by: Ori Kam <orika@mellanox.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Rather than having to explicitly list each and every driver to disable in a
build, we can use a small python script and the python glob library to
expand out the wildcards. This means that we can configure meson using e.g.
meson -Ddisable_drivers=crypto/*,event/* build
to do a build omitting all the crypto and event drivers. Explicitly
specified drivers e.g. net/i40e, work as before, and can be mixed with
wildcarded drivers as required.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Robin Jarry <robin.jarry@6wind.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Add support for CPU accelerated crypto. 'cpu-crypto' SA type has
been introduced in configuration allowing to use abovementioned
acceleration.
Legacy mode is not currently supported.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Update library to handle CPU cypto security mode which utilizes
cryptodev's synchronous, CPU accelerated crypto operations.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Introduce CPU crypto action type allowing to differentiate between
regular async 'none security' and synchronous, CPU crypto accelerated
sessions.
This mode is similar to ACTION_TYPE_NONE but crypto processing is
performed synchronously on a CPU.
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add support for CPU crypto mode by introducing required handler.
Authenticated encryption and decryption are supported with tag
generation/verification.
CPU crypto support include both AES-GCM and GMAC algorithms.
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add new API allowing to process crypto operations in a synchronous
manner. Operations are performed on a set of SG arrays.
Cryptodevs which allows CPU crypto operation mode have to
use RTE_CRYPTODEV_FF_SYM_CPU_CRYPTO capability.
Add a helper method to easily convert mbufs to a SGL form.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Introduce SAD cache.
Stores the most recent SA in a per lcore cache.
Cache represents flat array containing SA's indexed by SPI.
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Armv8 crypto PMD linked to armv8_crypto library created by Marvell.
Maintenance of armv8_crypto library will be discontinued.
Change Armv8 PMD to link to AArch64 crypto library hosted by Arm.
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Link against Intel IPsec Multi-buffer library, which
added support for SNOW3G-UEA2 and SNOW3G-UIA2 from version v0.53,
moving from libSSO SNOW3G library.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Link against Intel IPsec Multi-buffer library, which
added support for KASUMI-F8 and KASUMI-F9 from version v0.53,
moving from libSSO KASUMI library.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Link against Intel IPsec Multi-buffer library, which
added support for ZUC-EEA3 and ZUC-EIA3 from version v0.53,
moving from libSSO ZUC library.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add support for live migration feature by the HW:
Create a single Mkey that maps the memory address space of the
VHOST live migration log file.
Modify VIRTIO_NET_Q object and provide vhost_log_page,
dirty_bitmap_mkey, dirty_bitmap_size, dirty_bitmap_addr
and dirty_bitmap_dump_enable.
Modify VIRTIO_NET_Q object and move state to SUSPEND.
Query VIRTIO_NET_Q and get hw_available_idx and hw_used_idx.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add support for the next features in virtq configuration:
VIRTIO_F_RING_PACKED,
VIRTIO_NET_F_HOST_TSO4,
VIRTIO_NET_F_HOST_TSO6,
VIRTIO_NET_F_CSUM,
VIRTIO_NET_F_GUEST_CSUM,
VIRTIO_F_VERSION_1,
These features support depends in the DevX capabilities reported by the
device.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add support for get_features and get_protocol_features operations.
Part of the features are reported by the DevX capabilities.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add a new driver to support vDPA operations by Mellanox devices.
The first Mellanox devices which support vDPA operations are
ConnectX-6 Dx and Bluefield1 HCA for their PF ports and VF ports.
This driver is depending on rdma-core like the mlx5 PMD, also it is
going to use mlx5 DevX to create HW objects directly by the FW.
Hence, the common/mlx5 library is linked to the mlx5_vdpa driver.
This driver will not be compiled by default due to the above
dependencies.
Register a new log type for this driver.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Get a burst mode information for Rx/Tx queues in mlx5.
Provide callback functions to show this information in
a "show rxq info" and "show txq info" output.
Signed-off-by: Alexander Kozyrev <akozyrev@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
thunderx-nic uses secondary VF's to provide more queues to DPDK.
Current instructions explain the concept but don't show an easy way to
find which PCI id is primary and which is secondary VF's.
This patch extending the documentation of secondary VF w.r.t
the enumeration details.
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Before C0 HW revision, The RSS adder was computed based the following
static formula.
rss_adder<7:0> = flow_tag<7:0> ^ flow_tag<15:8> ^
flow_tag<23:16> ^ flow_tag<31:24>
The above scheme has the following drawbacks:
1) It is not in line with other standard NIC behavior.
2) There can be an SW use case where SW can compute the hash
upfront using Toeplitz function and predict the queue selection
to optimize some packet lookup function. The nonstandard
way of doing XOR makes the consumer to not predict the queue selection.
C0 HW revision onward, The HW can configure the
rss_adder<7:0> as flow_tag<7:0> to align with standard NICs.
This patch adds an option to select legacy RSS adder mode
using tag_as_xor=1 devargs option while keeping the standard NIC
behavior as default.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Function of_set_vlan_vid is wrongly listed twice in table
"Supported hardware offloads".
This patch removes the listing of of_set_vlan_vid under
"Header rewrite", and leaves the listing of of_set_vlan_vid
under "VLAN".
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
API makes think that rte_cryptodev_info_get() cannot return
a value >= 3 (RTE_CRYPTO_AEAD_LIST_END in 19.11).
20.02-rc1 was returning 3 (RTE_CRYPTO_AEAD_CHACHA20_POLY1305).
So the ABI compatibility contract was broken.
It could be solved with some function versioning,
but because a lack of time, the feature is reverted for now.
This reverts following commits:
- 6c9f3b347e ("cryptodev: add Chacha20-Poly1305 AEAD algorithm")
- 2c512e64d6 ("crypto/qat: support Chacha Poly")
- d55e01f579 ("test/crypto: add Chacha Poly cases")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
For normal developers, those checks are disabled.
Enabling them requires a configuration that will trigger the ABI dumps
generation as part of the existing devtools/test-build.sh and
devtools/test-meson-builds.sh scripts.
Those checks are enabled in the CI for the default meson options on x86
and aarch64 so that proposed patches are validated via our CI robot.
A cache of the ABI is stored in travis jobs to avoid rebuilding too
often.
Checks can be informational only, by setting ABI_CHECKS_WARN_ONLY when
breaking the ABI in a future release.
Explicit suppression rules have been added on internal structures
exposed to crypto drivers as the current ABI policy does not apply to
them.
This could be improved in the future by carefully splitting the headers
content with application and driver "users" in mind.
We currently have issues reported for librte_crypto recent changes for
which suppression rules have been added too.
Mellanox glue libraries are explicitly skipped as they are not part of
the application ABI.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Update l3fwd user guide to include event device related information.
Update release notes.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
This patch adds to MLX5 PMD support of matching on GTP item,
fields msg_type and teid, according to RFC [1].
GTP item validation and translation functions are added and called.
GTP tunnel type is added to supported tunnels.
[1] http://mails.dpdk.org/archives/dev/2019-December/152799.html
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Add support for reading the firmware version.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Add basic, per queue and extended statistics for
RX and TX, both from the adapter and the driver.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Add code to manipulate the RSS configuration
used by the adapter.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Add support for managing RX filters based on MAC and VLAN.
Hardware cannot provide the list of filters, thus we keep
a local list.
Add support for promisc and allmulticast modes.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Add support for port start/stop and handle basic features
including MTU and link up/down.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Register the Pensando ionic PMD (net_ionic) and define initial probe
and remove callbacks with adapter initialization.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Add makefile and config file options to compile the Pensando ionic PMD.
Add feature and version map file.
Update maintainers file.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
The existing optimize_object_size() function address the memory object
alignment constraint on x86 for better performance.
Different (micro) architecture may have different memory alignment
constraint for better performance and it not the same as the existing
optimize_object_size().
Some use, XOR(kind of CRC) scheme to enable DRAM channel distribution
based on the address and some may have a different formula.
Introducing arch_mem_object_align() function to abstract
the difference between different (micro) architectures to avoid
wasting memory for mempool object alignment for the architecture
that it is not required to do so.
Details on the amount of memory saving:
Currently, arm64 based architectures use the default (nchan=4,
nrank=1). The worst case is for an object whose size (including mempool
header) is 2 cache lines, where it is optimized to 3 cache lines (+50%).
Examples for cache lines size = 64:
orig optimized
64 -> 64 +0%
128 -> 192 +50%
192 -> 192 +0%
256 -> 320 +25%
320 -> 320 +0%
384 -> 448 +16%
...
2304 -> 2368 +2.7% (~mbuf size)
Additional details:
https://www.mail-archive.com/dev@dpdk.org/msg149157.html
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Starting from v20.05, rte_mempool_populate_iova() will return 0.
The ABI will be preserved through symbol versioning until 20.11.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
In prerequisites of ntb guide, the correct flag when loading igb_uio
module should be `wc_activate=1`, not `wc_active=1`.
Fixes: 11b5c7daf0 ("raw/ntb: add enqueue and dequeue functions")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add rawdev's selftest feature in SDP VF driver, which
verifies the EP mode functionality test.
Signed-off-by: Mahipal Challa <mchalla@marvell.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Register "dev_configure" API to configure/initialize the SDP
VF PCIe devices.
Signed-off-by: Mahipal Challa <mchalla@marvell.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Add the OCTEON TX2 SDP EP device probe along with the
build infrastructure for Make and meson builds.
Signed-off-by: Mahipal Challa <mchalla@marvell.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Add warning and counter to handle the malicious driver detection (MDD)
event.
When the hardware determines that a malicious driver on VF, this VF will
become unworkable, the PF records and gives a warning message.
Signed-off-by: Tao Zhu <taox.zhu@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
DPDK now supports registration of dynamic flags (dynf) to the mbuf.
dynf can be given any name, and can be used with a supporting PMD or
supporting application.
Due to the generic concept of the dynf, it is impossible and
meaningless, to define register set/get function for each flag.
This commit introduce a generic way to register and set/clear such
flags.
The basic syntax:
port config <port id> dynf <name> <set|clear>
The first step the new flag is registered. Regardless if the action is
set or clear.
There is no way to unregister the flag, after registering it.
The second step, if the action is set then we set the requested flag.
If this is the first flag that is enabled we also register a call back
for the Tx. In this call back we set the flag.
If the action is clear the requested flag is cleared, and if there
are no more flags that are set, the call back is removed.
The reason that the set is only applied in Tx is that in case of Rx
it is assumed that the value comes from the PMD.
If log is enabled the name of the flag, and value will be printed
in the packet info.
In order for the log to work correctly the registration of the flag
must be done before setting verbose.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
add fill_ip6_head()
hardcode udp destination port to 4500
handle ESP and AH pctypes in ESP-AH profile
update the i40e user guide with ESP information.
update release notes for i40e changes
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
add ITEM_ESP
add ITEM_ESP_SPI
update release notes for testpmd changes
add sample ESP rules in testpmd guide
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
CONFIG_RTE_IXGBE_INC_VECTOR is enabled by default, so remove
it and use architecture specific flags.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Update supported Intel NIC driver version and firmware version for 19.11
Update supported Intel NIC driver version to 2.8.43 for 19.08 which is
widely tested.
Fixes: cb8a35c22a ("doc: update supported i40e driver and firmware version")
Cc: stable@dpdk.org
Signed-off-by: Zhaoyan Chen <zhaoyan.chen@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
At BGX, DMAC filter table can be enabled to allow defined hosts.
Patch implements 'mac_addr_add' and 'mac_addr_remove' ops to
add/remove MAC filters which uses BGX DMAC filter table.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Harman Kalra <hkalra@marvell.com>
Currently, we only support VF device is bound to vfio_pci or igb_uio and
then driven by DPDK driver when PF is driven by kernel mode hns3 ethdev
driver, VF is not supported when PF is driven by hns3 DPDK driver.
This patch adds support setting VF MAC address by hns3 PF kernel ethdev
driver on the host by "ip link set ..." command.
1) If the hns3 PF kernel ethdev driver sets the MAC address for VF
device before the initialization of the related VF device, hns3 VF
PMD driver should get the MAC address from PF driver through mailbox
and configure hardware using this MAC address in the initialization.
The hns3 VF PMD driver get the MAC address form PF driver, if
obtaining a non-zero MAC address from mailbox, VF driver will
configure hardware using it, otherwise using a random MAC address in
the initialization of VF device.
2) If the hns3 PF kernel ethdev driver sets the MAC address for VF
device after the initialization of the related VF device, the PF
driver will notify VF driver to reset VF device to make the new MAC
address effective immediately. The hns3 VF PMD driver should check
whether the MAC address has been changed by the PF kernel netdevice
driver, if changed VF driver should configure hardware using the new
MAC address in the recovering hardware configuration stage of the
reset process.
3) When user has configured a mac address for VF device by "ip link set
..." command based on the PF device, the hns3 PF kernel ethdev driver
does not allow VF driver to request reconfiguring a different default
mac address and return -EPREM to VF driver through mailbox.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Adding FDIR support for L2TPv3 over IP header matching and adding
a new customized pctype for l2tpv3 over IP.
Signed-off-by: Rory Sexton <rory.sexton@intel.com>
Signed-off-by: Dariusz Jagus <dariuszx.jagus@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch adds the new flow item RTE_FLOW_ITEM_TYPE_L2TPV3OIP to
flow API to match a L2TPv3 over IP header. This patch supports only
L2TPv3 over IP header format which is different to L2TPv2/L2TPv3
over UDP. The difference in header formats between L2TPv3 over IP
and L2TP over UDP require a separate implementation for each.
Signed-off-by: Rory Sexton <rory.sexton@intel.com>
Signed-off-by: Dariusz Jagus <dariuszx.jagus@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
For some overlay network, such as VXLAN, the DSCP field in the new outer
IP header after VXLAN decapsulation may need to be updated accordingly.
This commit introduce the DSCP modify action for IPv4 and IPv6.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ori Kam <orika@mellanox.com>
This patch adds supports of receive packets through interrupt mode for
hns3 PF/VF driver. The following ops functions should be implemented
defined in the struct eth_dev_ops:
rx_queue_intr_enable
rx_queue_intr_disable
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch implements the feature described in RFC [1], adding
support of RSS action on L3 and/or L4 source or destination only.
[1] http://mails.dpdk.org/archives/dev/2019-December/152796.html
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Patch adds a runtime function to display the unicast and
multicast MAC addresses added to a port.
Syntax:
show port (port_id) macs|mcast_macs
Usage:
testpmd> show port 0 macs
Number of MAC address added: 1
B0:26:28:7F:F5:C1
testpmd>
testpmd> show port 0 mcast_macs
Number of Multicast MAC address added: 0
testpmd>
testpmd> mac_addr add 0 B0:26:28:7F:22:33
testpmd> mac_addr add 0 B0:26:28:7F:22:34
testpmd> show port 0 macs
Number of MAC address added: 3
B0:26:28:7F:F5:C1
B0:26:28:7F:22:33
B0:26:28:7F:22:34
testpmd>
testpmd> mac_addr remove 0 B0:26:28:7F:22:33
testpmd> show port 0 macs
Number of MAC address added: 2
B0:26:28:7F:F5:C1
B0:26:28:7F:22:34
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch implements handling mixed encrypted digest hash-cipher
requests (e.g. SNOW3G + ZUC or ZUC + AES CTR) possible when running
on GEN3 QAT. Such algorithm combinations are not supported on
GEN1/GEN2 hardware.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch adds minimum enqueue threshold to Intel
QuickAssist Technology PMD.
It is an optimisation, configured by a command line option,
which can be used to reduce MMIO write occurrences.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Remove the limitation whereby enqueue and dequeue must be
done in same thread.
The inflight calculation is reworked to be thread-safe for 2
threads - note this is not general multi-thread support, i.e
all enqueues to a qp must still be done in one thread and
all dequeues must be done in one thread, but enqueues and
dequeues may be in separate threads.
Documentation updated.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Add support for asymmetric operation EC Point Multiplication,
in crypto_octeontx PMD.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Balakrishna Bhamidipati <bbhamidipati@marvell.com>
Signed-off-by: Sunila Sahu <ssahu@marvell.com>
Asymmetric crypto library is extended to add ECPM (Elliptic Curve Point
Multiplication). The required xform type and op parameters are
introduced.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Balakrishna Bhamidipati <bbhamidipati@marvell.com>
Signed-off-by: Sunila Sahu <ssahu@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The rte_wait_until_equal_xx APIs abstract the functionality of
'polling for a memory location to become equal to a given value'.
Add the RTE_ARM_USE_WFE configuration entry for aarch64, disabled
by default. When it is enabled, the above APIs will call WFE instruction
to save CPU cycles and power.
From a VM, when calling this API on aarch64, it may trap in and out to
release vCPUs whereas cause high exit latency. Since kernel 4.18.20 an
adaptive trapping mechanism is introduced to balance the latency and
workload.
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
When building the API docs, we can make the meson.build file easier to
read, and allow more code per line, by using subdir_done() to quit early.
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Add proper support for calling sphinx whenever a file in the doc
directory changes. This is accomplished by using a wrapper script
for sphinx, which runs sphinx but also emits a gcc-format dependency
file listing all the doc files. This is used by ninja so that any
change to the doc files triggers a rebuild of the docs.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
For building the guides, we can make the meson.build easier to read by
using the subdir_done function to quit early.
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The install parameter to configure_file is new in 0.50 and generates a
warning since it is newer than our minimum version of 0.47.1. The
parameter, however, is unneeded as the documentation states:
"When omitted it defaults to true when install_dir is set and not empty,
false otherwise."
Given that install_dir is not set for this file, install defaults to false
so no need to explicitly specify it.
Fixes: 720b14db3a ("build: generate API documentation with meson")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
A new vDPA class was recently introduced.
IFC driver implements the vDPA operations,
hence it should be moved to the vDPA class.
Move it.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add vDPA devices features table and explanation.
Any vDPA driver can add its own supported features by ading a new ini
file to the features directory in doc/guides/vdpadevs/features.
Signed-off-by: Matan Azrad <matan@mellanox.com>
The vDPA (vhost data path acceleration) drivers provide support for
the vDPA operations introduced by the rte_vhost library.
Any driver which provides the vDPA operations should be moved\added to
the vdpa class under drivers/vdpa/.
Create the general files for vDPA class in drivers and in documentation.
The management tree for vDPA drivers is
git://dpdk.org/next/dpdk-next-virtio.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
After upgrading to python-3.8.0, a syntax mismatch is revealed:
doc/guides/conf.py:240: SyntaxWarning: "is not" with a literal.
Did you mean "!="?
if value is not '':
Removing "is not ''" seems the right thing to do.
A patch may also be needed in the RTD theme package:
https://github.com/readthedocs/sphinx_rtd_theme/commit/a49a812c.diff
(not included in release 0.4.3)
Fixes: 9db3f52126 ("doc: generate NIC overview table from ini files")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Meson fails to find a pkg-config executable if pkgconfig
isn't set for aarch64. The environment variable `PKG_CONFIG_PATH`
is useless in this case, and meson fails to locate dependencies
that are built in non-standard paths.
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Update the cross build tool version to gcc8.3.
Fixes: 01add9da25 ("doc: add cross compiling guide")
Cc: stable@dpdk.org
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Previous versions of numactl may produce the following error
on some systems (at least on Fedora 30 and RHEL7.4):
./.libs/libnuma.so: undefined reference to `minor'
./.libs/libnuma.so: undefined reference to `major'
collect2: error: ld returned 1 exit status
This was fixed in upstream commit:
25691a084a
The fix is available in v2.0.13.
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Gavin Hu <gavin.hu@arm.com>
The output of running the helloworld example on FreeBSD was a little
out-of-date and can be shortened by using the latest version of DPDK.
Update appropriately.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
FreeBSD 10 is now EOL and all testing with DPDK takes place on BSD versions
11 and 12, so we can just remove the note. The BSD ports are supported on
all non-EOL versions of BSD.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Since the meson instructions are the simpler of the two sets, and also the
ones most future-proof, put those first in the user documentation with make
instructions following them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Gavin Hu <gavin.hu@arm.com>
Add instructions on building DPDK and using the pkg-config file to the
linux GSG.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Update the system requirements section of the doc to cover builds with
meson and ninja. This involves updating the package dependencies to include
meson, ninja and python 3.5, and also updating the optional dependencies
section to explain that the components are enabled/disabled automatically
by meson.
As part of this update, the relevant sections were simplified to keep the
document shorter. For mandatory requirements, we can refer to the various
distro's development tools package groups rather than requiring gcc, core
tools etc. individually. The optional package list was very incomplete, and
if complete would duplicate information in the individual driver's guides.
Therefore we can simplify it by listing only the library optional
requirements and referring users to the driver docs to find details on
their dependencies.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Fix OFED and rdma-core versions for current offloads.
Add new offloads minimum versions.
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
By default, both test-build.sh and test-meson-builds.sh scripts create the
builds they generate in the current working directory, leading to a large
number of build directories being present when testing patches. This
patchset modifies both scripts to use a DPDK_BUILD_TEST_DIR environment
variable to control where the build outputs are put.
For example, doing:
export DPDK_BUILD_TEST_DIR=__builds
./devtools/test-meson-builds.sh && ./devtools/test-build.sh \
x86_64-native-linux-clang+shared i686-native-linux-gcc
gives a "__builds" directory with 14 meson and 2 make builds (with the
meson build count depending on compiler availability)
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
The 'get_user_pages_remote()' API is updated in kernel 4.10.0 [1],
but the check added as > 4.9.0,
this logic is broken for kernels 4.9.x, because they justify
> 4.9.0 check but have the old API.
Fixing the check as >= 4.10.0
[1]
commit 5b56d49fc31d ("mm: add locked parameter to get_user_pages_remote()")
Fixes: d965af9e8a ("kni: increase kernel version requirement for VA")
Reported-by: Andrew Rybchenko <arybchenko@solarflare.com>
Suggested-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Aligning the Wind River copyright notices to be consistent with the
other files which bare the Wind River copyright notice.
Fixes: 32113d352d ("doc: replace license text with SPDX tag in AVP guide")
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Move cryptodev feature near other crypto features.
Group ethdev features together.
Sort drivers/net features with new PMDs first.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Add some pointers to the releases notes on the changes to the abi policy,
the introduction of project-level ABI management and the deprecation of
library-level management.
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: John McNamara <john.mcnamara@intel.com>
Commit in fixes line sets the DV (Direct Verbs) flow engine as default.
Newer versions of DV flow engine use the DR (Direct Rules) features.
DR is supported from RDMA Core library version rdma-core-24.0.
This cause failure to start port when using older rdma-core version,
without DR support.
This patch selects DV flow engine if rdma-core version is v24.0 or
higher. Verbs flow engine is selected otherwise.
Fixes: cd4569d2bf ("net/mlx5: change default flow engine to DV")
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
The offload flag was added, but the deprecation notice was not removed.
Fixes: 5d30897295 ("ethdev: add mbuf RSS update as an offload")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The functionality is added, but the deprecation notice is not
removed.
Fixes: 5d4813acda ("ethdev: add packet type range function")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
- Add note for sharing an adapter between DPDK and Linux drivers.
- Update the firmware version in example.
- Add Config note for potential error due to lack of memzone descriptor
count.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Update release doc briefly describing updates to bnxt PMD for
19.11 release.
The support for these was added in the following commits:
1) b150a7e7ee ("net/bnxt: support LRO on Thor adapters")
2) be14720def ("net/bnxt: support FW reset")
3) df6cd7c1f7 ("net/bnxt: handle reset notify async event from FW")
4) 698aa7e953 ("net/bnxt: add code to determine the Tx COS queue")
5) 04102f2ffc ("net/bnxt: update HWRM API to version 1.10.1.6")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Updating bnxt.ini file.
These features were added earlier under the following commits.
1) 94d4afd2d1 ("net/bnxt: advertise scatter Rx offload capability")
2) 57d5e5bc86 ("net/bnxt: add statistics")
3) 8892013668 ("net/bnxt: support xstats get by id")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Corrected one typo and IP address according RFC5735.
Fixes: de96fe68ae ("net/tap: add basic flow API patterns and actions")
Cc: stable@dpdk.org
Signed-off-by: Andrzej Ostruszka <aostruszka@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The correct name for virt2memseg API is `rte_mem_virt2memseg`, not
`rte_virt2memseg`.
Fixes: 950e8fb4e1 ("mem: allow registering external memory areas")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
This patch adds some minor updates for the vm_power_manager and guest_cli
example applications.
Now that the virtio-serial channels between vm_power manager and
the guest_cli has bi-directional capability, there are some new commands.
Firstly, the command in vm_power_manager to enable queries for a given VM:
* set_query {vm_name} enable|disable
Then, commands to query the frequencies and capabilities of the cores
in the VM:
* query_cpu_freq {core_num}|all
* query_cpu_caps {core_num}|all
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Updates documentation to reflect the changes in the QoS scheduler
library and example.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Update the CCP doc for fixing description of some parameter,
Changing AES_CBC to aes-cbc, SHA1_HMAC to sha1-hmac.
Fixes: 4433ced9aa ("doc: add AMD CCP guide")
Cc: stable@dpdk.org
Signed-off-by: Amaranath Somalapuram <asomalap@amd.com>
Sync mail box data structures to version 1.1.3.
Add mail box version verification and defer initializing octeontx
devices if mail box version mismatches.
Update OCTEON TX limitaion with max mempool size used.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Remove trailing blank lines. They serve no purpose and are just
editor leftovers.
These can cause git to complain about whitespace errors during merges.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
With the API and ABI freeze ahead, it will be good to reserve
some bits on the private structure for future use.
Otherwise we will potentially need to maintain two different
private structure during 2020 period.
There is already one use case for those reserved bits[1]
The reserved field should be set to 0 by the user.
[1] https://patches.dpdk.org/patch/63077/
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
A build error reported related to the selected 'get_user_pages_remote()'
kernel API:
.../kernel/linux/kni/kni_dev.h:113:8:
error: too few arguments to function ‘get_user_pages_remote’
ret = get_user_pages_remote(tsk, tsk->mm, iova, 1
^~~~~~~~~~~~~~~~~~~~~
Currently there are three versions of the 'get_user_pages_remote()'
supported, based on kernel version < 4.9, = 4.9, > 4.9.
These version based checks are not working fine with the distro kernels
which is the cause of reported build error. The error reported by the
kernel version 4.8, but it is using API defined in > 4.9.
To be able to take control of this, and possible more, related build
error, increasing the minimum supported kernel version for iova=va with
KNI to kernel version 4.9.
This leaves us with single version of the kernel API and more manageable.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
As per new ABI policy [1], all of the libraries are now versioned using
one global ABI version. Stable libraries use the MAJOR.MINOR ABI
version for their shared objects, while experimental libraries
use the 0.MAJORMINOR convention for their versioning.
Experimental library versioning is managed globally. Changes in this
patch implement the necessary steps to enable that.
The CONFIG_RTE_MAJOR_ABI option was introduced to permit multiple
DPDK versions installed side by side. The problem is now addressed
through the new ABI policy, and thus can be removed.
[David] For external libraries relying on Makefile, LIBABIVER is
preserved to avoid using DPDK global ABI version.
[1] https://doc.dpdk.org/guides/contributing/abi_policy.html
Signed-off-by: Marcin Baran <marcinx.baran@intel.com>
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Since not all data paths support flow mark, the driver needs
a hint from application to select the correct data path if
flow mark is required. The patch introduces a devarg
"flow-mark-support" as a workaround solution, since a standard
way is still ongoing.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
As the result of testing it was found that some hosts have
the performance penalty imposed by required write memory barrier
after doorbell writing. Before 19.08 release there was some
heuristics to decide whether write memory barrier should be
performed. For the bursts of recommended size (or multiple)
it was supposed there were some extra ongoing packets in the
next burst and write memory barrier may be skipped (supposed
to be performed in the next burst, at least after descriptor
writing).
This patch restores that behaviour, the devargs tx_db_nc=2
must be specified to engage this performance tuning feature.
Fixes: 8409a28573 ("net/mlx5: control transmit doorbell register mapping")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The default flow engine is Verbs flow engine, for legacy reasons.
This patch changes the default to DV flow engine (dv_flow_en = 1).
Documentation is updated accordingly.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Add kernel driver, firmware and DDP package matching list
for ice PMD.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Zero-copy slave support for memif PMD.
Slave interface exposes DPDK memory to
master interface. Only single file segments
are supported (EAL option --single-file-segments).
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Commit in fixes tag removed the match_metadata Tx offload.
This patch removes the option to select this offload from testpmd
menu, help text and documentation.
It also modifies the cmd_show_tx_metadata_parsed() function, to
display the value correctly, and the dump_pkt_burst() function to
display the relevant (Tx/Rx) metadata only.
Fixes: 9bf26e1318 ("ethdev: move egress metadata to dynamic field")
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Add support to set supported ptypes for octeontx2 and
remove devarg scheme to disable ptype parsing support as
application can use rte_eth_dev_set_ptypes() normative API
to enable the same use case.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Retrieve burst mode information according to the selected Rx/Tx mode and
offloads.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
As per current support, Scatter Gather is only supported
for out of place input and output buffers.
This patch add support for Scatter Gather for in-place buffers.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
AESNI MB and AESNI GCM PMDs were updated to support
latest IPSec Multi buffer library (v0.53), and the user guide
of hose drivers were updated but not release notes.
Fixes: 4b70152374 ("crypto/aesni_gcm: support in-place chained mbufs")
Fixes: d91dc58356 ("doc: support IPsec Multi-buffer lib v0.53")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Now that KNI supports VA (with kernel versions starting 4.6.0), we can
accept IOVA as VA, but KNI must be configured for this.
Pass iova_mode when creating KNI netdevs.
So far, IOVA detection policy forced IOVA as PA when KNI is loaded,
whatever the buses IOVA requirements were.
We can now use IOVA as VA, but this comes with a cost in KNI.
When no constraint is expressed by the buses, keep the current behavior
of choosing PA.
Note: this change supposes that dpdk is built on the same kernel than
the target system kernel; no objection has been expressed on this topic.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Shoot repeated words in all our guides.
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Align the description to what the code snippet shows.
Fixes: 0a92e63fc4 ("raw/ioat: add local API to perform copies")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Using external explicit references to http://doc.dpdk.org makes older
releases documentation point to the current master documentation pages.
Switch to internal references.
Fixes: 59ad25fe21 ("doc: add overview of qat guide")
Fixes: 30e7fbd628 ("doc: add event timer adapter guide")
Fixes: b7f859c9a9 ("doc: add switch representation documentation")
Fixes: f714a18885 ("app/testbbdev: add test application for bbdev")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The OSS-security project functions as a single point of contact for
pre-release, embargoed security notifications. Distributions and major
vendors are subscribed to this private list, so that they can be warned
in advance and schedule the work required to fix the vulnerability.
List and link this process in the DPDK security process document.
Signed-off-by: Luca Boccassi <luca.boccassi@microsoft.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Updates to the ABI versioning guide, to account for the changes to the DPDK
ABI/API policy. Fixes for references to abi versioning and policy guides.
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
This policy change introduces major ABI versions, these are
declared every year, typically aligned with the LTS release
and are supported by subsequent releases in the following year.
This change is intended to improve ABI stabilty for those projects
consuming DPDK.
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Separate versioning.rst into abi versioning and abi policy guidance, in
preparation for adding more detail to the abi policy. Add an entry to the
maintainer file for the abi policy.
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
This patch implements use of the API for LRO aggregated packet
max size.
It adds command-line and runtime commands to configure this value,
and adds option to show the supported value.
Documentation is updated accordingly.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch implements use of the API for LRO aggregated packet
max size.
Rx queue create is updated to use the relevant configuration.
Documentation is updated accordingly.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This patch implements API for configuration and
validation of max size for LRO aggregated packet.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Disable packey type parsing on port init, user can enable ptype parsing
by issuing set ptype command.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add new Rx offload flag `DEV_RX_OFFLOAD_RSS_HASH` which can be used to
enable/disable PMDs write to `rte_mbuf:#️⃣:rss`.
PMDs notify the validity of `rte_mbuf:#️⃣rss` to the application
by enabling `PKT_RX_RSS_HASH ` flag in `rte_mbuf::ol_flags`.
Also update testpmd rx_offload command to include RSS_HASH
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add `rte_eth_dev_set_ptypes` function that will allow the application
to inform the PMD about reduced range of packet types to handle.
Based on the ptypes set PMDs can optimize their Rx path.
-If application doesn’t want any ptype information it can call
`rte_eth_dev_set_ptypes(ethdev_id, RTE_PTYPE_UNKNOWN, NULL, 0)`
and PMD may skip packet type processing and set rte_mbuf::packet_type to
RTE_PTYPE_UNKNOWN.
-If application doesn’t call `rte_eth_dev_set_ptypes` PMD can return
`rte_mbuf::packet_type` with `rte_eth_dev_get_supported_ptypes`.
-If application is interested only in L2/L3 layer, it can inform the PMD
to update `rte_mbuf::packet_type` with L2/L3 ptype by calling
`rte_eth_dev_set_ptypes(ethdev_id,
RTE_PTYPE_L2_MASK | RTE_PTYPE_L3_MASK, NULL, 0)`.
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add the doxygen for ice protocol extraction feature APIs.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
The original design is to use rte_mbuf::udata64 to save the metadata of
protocol extraction which has network protocol data fields and type, a
private API is used to decode this metadata.
Use the dynamic mbuf field and flags to register the needed fields in
mbuf, to avoid overwriting 'rte_mbuf::udata64', since the application
may use it. Now the protocol extraction metadate is saved into dynamic
mbuf field with 4B size, and its type and validity is indicated by the
related dynamic mbuf flags in 'rte_mbuf::ol_flags'.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
The rdma core library can map doorbell register in two ways,
depending on the environment variable "MLX5_SHUT_UP_BF":
- as regular cached memory, the variable is either missing or
set to zero. This type of mapping may cause the significant
doorbell register writing latency and requires explicit
memory write barrier to mitigate this issue and prevent
write combining.
- as non-cached memory, the variable is present and set to
not "0" value. This type of mapping may cause performance
impact under heavy loading conditions but the explicit write
memory barrier is not required and it may improve core
performance.
The new devarg is introduced "tx_db_nc", if this parameter is
set to zero, the doorbell register is forced to be mapped to
cached memory and requires explicit memory barrier after
writing to. If "tx_db_nc" is set to non-zero value the doorbell
will be mapped as non-cached memory, not requiring the memory
barrier. If "tx_db_nc" is missing the behaviour will be defined
by presence of "MLX5_SHUT_UP_BF" in environment. If variable
is missed the default value zero will be set for ARM64 hosts
and one for others.
In run time the code checks the mapping type and provides the
memory barrier after writing to tx doorbell register if it is
needed. The mapping type is extracted directly from the
uar_mmap_offset field in the queue properties.
Fixes: 18a1c20044 ("net/mlx5: implement Tx burst template")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
A Vhost-blk example that support inflight feature. It uses the
new APIs that introduced in the first patch, so it can show how these
APIs work to support inflight feature.
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The PMD parameter dv_xmeta_en is added to control extensive
metadata support. A nonzero value enables extensive flow
metadata support if device is capable and driver supports it.
This can enable extensive support of MARK and META item of
rte_flow. The newly introduced SET_TAG and SET_META actions
do not depend on dv_xmeta_en parameter, because there is
no compatibility issue for new entities. The dv_xmeta_en is
disabled by default.
There are some possible configurations, depending on parameter
value:
- 0, this is default value, defines the legacy mode, the MARK
and META related actions and items operate only within NIC Tx
and NIC Rx steering domains, no MARK and META information
crosses the domain boundaries. The MARK item is 24 bits wide,
the META item is 32 bits wide.
- 1, this engages extensive metadata mode, the MARK and META
related actions and items operate within all supported steering
domains, including FDB, MARK and META information may cross
the domain boundaries. The ``MARK`` item is 24 bits wide, the
META item width depends on kernel and firmware configurations
and might be 0, 16 or 32 bits. Within NIC Tx domain META data
width is 32 bits for compatibility, the actual width of data
transferred to the FDB domain depends on kernel configuration
and may be vary. The actual supported width can be retrieved
in runtime by series of rte_flow_validate() trials.
- 2, this engages extensive metadata mode, the MARK and META
related actions and items operate within all supported steering
domains, including FDB, MARK and META information may cross
the domain boundaries. The META item is 32 bits wide, the MARK
item width depends on kernel and firmware configurations and
might be 0, 16 or 24 bits. The actual supported width can be
retrieved in runtime by series of rte_flow_validate() trials.
If there is no E-Switch configuration the ``dv_xmeta_en`` parameter is
ignored and the device is configured to operate in legacy mode (0).
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This commit introduce the hairpin queues to the testpmd.
the hairpin queue is configured using --hairpinq=<n>
the hairpin queue adds n queue objects for both the total number
of TX queues and RX queues.
The connection between the queues are 1 to 1, first Rx hairpin queue
will be connected to the first Tx hairpin queue
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This adds new device id to the list of Mellanox devices
that runs mlx5 PMD.
- ConnectX-6DX device ID
- ConnectX-6DX SRIOV device ID
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Add device IDs for E810_XXV.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
System DPI Packet Interface Unit (SDP) is a co-processor
of OCTEON TX2 which provides PCIe endpoint support for a
remote host to DMA packets into and out of the OCTEON TX2 SoC.
SDP interface comes in to live only when it is connected in
EP mode. It exposes input and output queue pairs to remote host
for instruction input and packet output. It can be used as
a communication channel between remote host and OCTEON TX2.
Host machine needs to use corresponding user/kernel mode
driver to communicate with SDP interface on OCTEON TX2 SoC.
SDP interface support is limited to SDP PF device now.
No SDP VF support.
Signed-off-by: Subrahmanyam Nilla <snilla@marvell.com>
Signed-off-by: Venkateshwarlu Nalla <venkatn@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
This patch removes feature "Free Tx mbuf" on demand from hinic.ini
because pmd driver does not support this feature.
Fixes: 1d09792a27 ("net/hinic: add build and doc files")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
This patch removes deprecated feature Flow Director from hinic.ini,
hinic.rst and release_19_11.rst, because the feature has been
removed from the feature list in the following commit:
Commit 030febb664 ("doc: remove deprecated ethdev features"), and
adds Flow API feature which is for generic filtering to doc files.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
Adding support to check TX and RX descriptor status.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The dynamic mbuf fields were introduced by [1]. The egress metadata is
good candidate to be moved from statically allocated field tx_metadata to
dynamic one. Because mbufs are used in half-duplex fashion only, it is
safe to share this dynamic field with ingress metadata.
The shared dynamic field contains either egress (if application going to
transmit mbuf with tx_burst) or ingress (if mbuf is received with rx_burst)
metadata and can be accessed by RTE_FLOW_DYNF_METADATA() macro or with
rte_flow_dynf_metadata_set() and rte_flow_dynf_metadata_get() helper
routines. PKT_TX_DYNF_METADATA/PKT_RX_DYNF_METADATA flag will be set
along with the data.
The mbuf dynamic field must be registered by calling
rte_flow_dynf_metadata_register() prior accessing the data.
The availability of dynamic mbuf metadata field can be checked with
rte_flow_dynf_metadata_avail() routine.
DEV_TX_OFFLOAD_MATCH_METADATA offload and configuration flag is removed.
The metadata support in PMDs is engaged on dynamic field registration.
Metadata feature is getting complex. We might have some set of actions
and items that might be supported by PMDs in multiple combinations,
the supported values and masks are the subjects to query by perfroming
trials (with rte_flow_validate).
[1] http://patches.dpdk.org/patch/62040/
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ori Kam <orika@mellanox.com>
Currently, metadata can be set on egress path via mbuf tx_metadata field
with PKT_TX_METADATA flag and RTE_FLOW_ITEM_TYPE_META matches metadata.
This patch extends the metadata feature usability.
1) RTE_FLOW_ACTION_TYPE_SET_META
When supporting multiple tables, Tx metadata can also be set by a rule and
matched by another rule. This new action allows metadata to be set as a
result of flow match.
2) Metadata on ingress
There's also need to support metadata on ingress. Metadata can be set by
SET_META action and matched by META item like Tx. The final value set by
the action will be delivered to application via metadata dynamic field of
mbuf which can be accessed by RTE_FLOW_DYNF_METADATA() macro or with
rte_flow_dynf_metadata_set() and rte_flow_dynf_metadata_get() helper
routines. PKT_RX_DYNF_METADATA flag will be set along with the data.
The mbuf dynamic field must be registered by calling
rte_flow_dynf_metadata_register() prior to use SET_META action.
The availability of dynamic mbuf metadata field can be checked
with rte_flow_dynf_metadata_avail() routine.
If application is going to engage the metadata feature it registers
the metadata dynamic fields, then PMD checks the metadata field
availability and handles the appropriate fields in datapath.
For loopback/hairpin packet, metadata set on Rx/Tx may or may not be
propagated to the other path depending on hardware capability.
MARK and METADATA look similar and might operate in similar way,
but not interacting.
Initially, there were proposed two metadata related actions:
- RTE_FLOW_ACTION_TYPE_FLAG
- RTE_FLOW_ACTION_TYPE_MARK
These actions set the special flag in the packet metadata, MARK action
stores some specified value in the metadata storage, and, on the packet
receiving PMD puts the flag and value to the mbuf and applications can
see the packet was threated inside flow engine according to the appropriate
RTE flow(s). MARK and FLAG are like some kind of gateway to transfer some
per-packet information from the flow engine to the application via
receiving datapath. Also, there is the item of type RTE_FLOW_ITEM_TYPE_MARK
provided. It allows us to extend the flow match pattern with the capability
to match the metadata values set by MARK/FLAG actions on other flows.
From the datapath point of view, the MARK and FLAG are related to the
receiving side only. It would useful to have the same gateway on the
transmitting side and there was the feature of type RTE_FLOW_ITEM_TYPE_META
was proposed. The application can fill the field in mbuf and this value
will be transferred to some field in the packet metadata inside the flow
engine. It did not matter whether these metadata fields are shared because
of MARK and META items belonged to different domains (receiving and
transmitting) and could be vendor-specific.
So far, so good, DPDK proposes some entities to control metadata inside
the flow engine and gateways to exchange these values on a per-packet basis
via datapaths.
As we can see, the MARK and META means are not symmetric, there is absent
action which would allow us to set META value on the transmitting path.
So, the action of type:
- RTE_FLOW_ACTION_TYPE_SET_META was proposed.
The next, applications raise the new requirements for packet metadata.
The flow ngines are getting more complex, internal switches are introduced,
multiple ports might be supported within the same flow engine namespace.
From the DPDK points of view, it means the packets might be sent on one
eth_dev port and received on the other one, and the packet path inside
the flow engine entirely belongs to the same hardware device. The simplest
example is SR-IOV with PF, VFs and the representors. And there is a
brilliant opportunity to provide some out-of-band channel to transfer
some extra data from one port to another one, besides the packet data
itself. And applications would like to use this opportunity.
It is supposed for application to use trials (with rte_flow_validate)
to detect which metadata features (FLAG, MARK, META) actually supported
by PMD and underlying hardware. It might depend on PMD configuration,
system software, hardware settings, etc., and should be detected
in run time.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ori Kam <orika@mellanox.com>
Change the type of burst mode information from bit field to free string
data, so that each PMD can describe the Rx/Tx busrt functions flexibly.
Fixes: eb5902504a ("ethdev: add API for getting burst mode information")
Fixes: 6b6609f68c ("net/i40e: support Rx/Tx burst mode info")
Fixes: e9a10e6c21 ("net/ice: support Rx/Tx burst mode info")
Fixes: 7fe108edcf ("app/testpmd: show Rx/Tx burst mode description")
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Ray Kinsella <ray.kinsella@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This patch removes deprecated feature 'Flow Director' from hns3.ini
and hns3_vf.ini because the feature has been removed from the
feature list in the following commit:
Commit 030febb664 ("doc: remove deprecated ethdev features")
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
A tag is a transient data which can be used during flow match. This can be
used to store match result from a previous table so that the same pattern
need not be matched again on the next table. Even if outer header is
decapsulated on the previous match, the match result can be kept.
Some device expose internal registers of its flow processing pipeline and
those registers are quite useful for stateful connection tracking as it
keeps status of flow matching. Multiple tags are supported by specifying
index.
Example testpmd commands are:
flow create 0 ingress pattern ... / end
actions set_tag index 2 value 0xaa00bb mask 0xffff00ff /
set_tag index 3 value 0x123456 mask 0xffffff /
vxlan_decap / jump group 1 / end
flow create 0 ingress pattern ... / end
actions set_tag index 2 value 0xcc00 mask 0xff00 /
set_tag index 3 value 0x123456 mask 0xffffff /
vxlan_decap / jump group 1 / end
flow create 0 ingress group 1
pattern tag index is 2 value spec 0xaa00bb value mask 0xffff00ff /
eth ... / end
actions ... jump group 2 / end
flow create 0 ingress group 1
pattern tag index is 2 value spec 0xcc00 value mask 0xff00 /
tag index is 3 value spec 0x123456 value mask 0xffffff /
eth ... / end
actions ... / end
flow create 0 ingress group 2
pattern tag index is 3 value spec 0x123456 value mask 0xffffff /
eth ... / end
actions ... / end
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
The function rte_eth_dev_count() was marked as deprecated in DPDK 18.05
in commit d9a42a69fe ("ethdev: deprecate port count function").
It was planned to be removed after 19.11 LTS release,
but given we must not break ABI between 19.11 and 20.11,
it is removed now.
Note the ABI version is not dumped in this commit
because other changes already did.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
This commits adds the hairpin get capabilities function.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This commit introduce hairpin queue type.
The hairpin queue in build from Rx queue binded to Tx queue.
It is used to offload traffic coming from the wire and redirect it back
to the wire.
There are 3 new functions:
- rte_eth_dev_hairpin_capability_get
- rte_eth_rx_hairpin_queue_setup
- rte_eth_tx_hairpin_queue_setup
In order to use the queue, there is a need to create rte_flow
with queue / RSS action that targets one or more of the Rx queues.
Signed-off-by: Ori Kam <orika@mellanox.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Adding support to parse higig2 header in RTE flow for octeontx2.
And added devargs to configure port for higig2.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adding support to configure specific switch types like high2 and dsa
on a port. When this switch type is configured, it is expected that
all the traffic on that port should be of specific type only.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
In our testing we have identified a critical FW bug. Performance
is degraded significantly for certain packet sizes with 8.40.25.0 FW.
This patch updates the FW to version 8.40.33.0. The updated FW has a
fix to performance issue.
The patch also adds initialization for FW overlay RAM as part of
hardware initialization which is required by the new FW.
Fixes: 3b307c55f2 ("net/qede/base: update FW to 8.40.25.0")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Rx queue for LRO is created using DevX. Flows created on this queue
must use the DV flow engine.
This patch adds check of dv_flow_en=1 when configuring LRO support
on device spawn.
Documentation is updated accordingly.
Fixes: 175f1c21d0 ("net/mlx5: check conditions to enable LRO")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The rte_security lib has introduced replay_win_sz,
so it can be removed from the rte_ipsec lib.
The relevant tests, app are also update to reflect
the usages.
Note that esn and anti-replay fileds were earlier used
only for ipsec library, they were enabling the libipsec
by default. With this change esn and anti-replay setting
will not automatically enabled libipsec.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
At present the ipsec xfrom is missing the important step
to configure the anti replay window size.
The newly added field will also help in to enable or disable
the anti replay checking, if available in offload by means
of non-zero or zero value.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
IPSec Multi buffer library supports encryption on multiple segments.
When dealing with chained buffers (multiple segments), as long as
the operation is in-place, the destination buffer does not have to
be contiguous (unlike in the case of out-of-place operation).
Therefore, the limitation of not supporting in-place chained mbuf
can be removed.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Updated AESNI MB and AESNI GCM PMD documentation guides
with information about the latest Intel IPSec Multi-buffer
library supported.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add tests for offload fallback feature; add inbound config modificator
SGW_CFG_XPRM_IN (offload fallback setting can be set only for inbound
SAs). Tests are using cryptodev for outbound SA.
To test fragmentation with QAT set:
MULTI_SEG_TEST="--reassemble=4096 --cryptodev_mask=0x5555"
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Tested-by: Bernard Iremonger <bernard.iremonger@intel.com>
Due to fragment loss on highly saturated links and long fragment
lifetime, ipsec-secgw application quickly runs out of free reassembly
buckets. As a result new fragments are being dropped.
Introduce --frag-ttl option which allow user to lower default fragment
lifetime which solves problem of saturated reassembly buckets with high
bandwidth fragmented traffic.
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Inline processing is limited to a specified subset of traffic. It is
often unable to handle more complicated situations, such as fragmented
traffic. When using inline processing such traffic is dropped.
Introduce fallback session for inline crypto processing allowing
handling packets that normally would be dropped. A fallback session is
configured by adding 'fallback' keyword with 'lookaside-none' parameter
to an SA configuration. Only 'inline-crypto-offload" as a primary
session and 'lookaside-none' as a fall-back session combination is
supported by this patch.
Fallback session feature is not available in the legacy mode.
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Tested-by: Bernard Iremonger <bernard.iremonger@intel.com>
Ubuntu ships with a patched version of doxygen that enables
HAVE_DOT (disabled by default). Enabling this option causes the warning:
"""
warning: Included by graph for 'rte_common.h' not generated,
too many nodes. Consider increasing DOT_GRAPH_MAX_NODES
"""
This reproduces with doxygen version 1.8.13 and
dot - graphviz version 2.40.1 on Ubuntu 18.04.
This will force doxygen not to assume that dot (part of Graphviz)
is installed, and will result in dot not being used for visualization.
If someone still needs to generate the graphs, the following can
be considered:
- Increase DOT_GRAPH_MAX_NODES to a large value.
- Set HAVE_DOT for more powerful graphs.
- Set DOT_IMAGE_FORMAT=svg to generate svg images.
- Set INTERACTIVE_SVG=YES to allow zooming and panning.
See:
- http://changelogs.ubuntu.com/changelogs/pool/main/d/doxygen/doxygen_1.8.13-10/changelog
- http://www.doxygen.nl/manual/config.html#cfg_have_dot
- https://github.com/doxygen/doxygen/issues/7345
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The original patch used incorrect subnet range for testing.
Fixes: 37afe381bd ("examples/l3fwd: use reserved IP addresses")
Cc: stable@dpdk.org
Reported-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reported-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch adds an option to enable link time optimization. In addition
to LTO option itself (-flto) fat-lto-objects are being used. This is
because during the build pmdinfogen scans the generated ELF objects to
find this_pmd_name* symbol in symbol table. Without fat-lto-objects gcc
produces ELF only with extra symbols for internal use during linking.
Signed-off-by: Andrzej Ostruszka <aostruszka@marvell.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Every implementation of a particular version of given symbol needs to be
marked in its declaration as such (using `__vsym` macro). This patch
fixes this and also clarifies the documentation about that.
Signed-off-by: Andrzej Ostruszka <aostruszka@marvell.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
This patch fixes documentation of versioning macros so that they are
aligned with their implementation (no underscore is added by macros).
Fixes: f1ef9794f9 ("doc: add ABI guidelines")
Cc: stable@dpdk.org
Signed-off-by: Andrzej Ostruszka <aostruszka@marvell.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
