Adding bare minimum PMD library and doc build infrastructure
and claim the maintainership for octeontx2 PMD.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Due to position change, cannot be a full time maintainer anymore.
The git tree dpdk-next-net-mlx will be managed by Raslan,
as approved by the DPDK Technical Board.
For mlx5 PMD, Slava is added as additional maintainer.
Will continue to be involved in the DPDK community in different ways.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Enable an example for rawdev ntb. Support interactive mode to send
file on one host and receive file from another host. The command line
would be 'send [filepath]' and 'receive [filepath]'.
But since the FIFO is not enabled right now, use rte_memcpy as the enqueue
and dequeue functions and only support transmitting file no more than 4M.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Introduce rawdev driver support for NTB (Non-transparent Bridge) which
can help to connect two separate hosts with each other.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add the make and meson based build infrastructure along
with the DMA device probe with documentation infrastructure.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Add stubs for ioat rawdev driver support in DPDK, specifically:
* makefile and meson build hooks
* initial public header file
* rawdev main C file, with probe and release functions
* release note update announcing the driver
* initial documentation for the new section in the rawdev doc
* unit test stubs for device unit tests
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Jiayu Hu <jiayu.hu@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Add the make and meson based build infrastructure along with the
eventdev(SSO) device probe.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Replace the mbuf pointer array in the event eth Rx adapter
callback with an event array. Using an event array allows
the application to change attributes of the events enqueued
by the SW adapter.
The callback can drop packets and populate a callback
argument with the number of dropped packets. Add a Rx adapter
stats field to keep track of the total number of dropped packets.
This commit removes the experimental tags from
the callback and stats APIs, the experimental tag from eventdev
is also removed and eventdev functions become part of the
main DPDK API/ABI.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add build and doc files along with hinic_pmd_ethdev.c
which just includes PMD register and log initialization
for compilation.
Signed-off-by: Ziyang Xuan <xuanziyang2@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When promoting those symbols as stable, there is no check to ensure that
the final result is consistent.
Add a little script to get the symbols per section from the library map
files.
Validate that all experimental symbols in object files are referenced by
library map files.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
This commit replaces rte_rand()'s use of lrand48() with a DPDK-native
combined Linear Feedback Shift Register (LFSR) (also known as
Tausworthe) pseudo-random number generator.
This generator is faster and produces better-quality random numbers
than the linear congruential generator (LCG) of lib's lrand48(). The
implementation, as opposed to lrand48(), is multi-thread safe in
regards to concurrent rte_rand() calls from different lcore threads.
A LCG is still used, but only to seed the five per-lcore LFSR
sequences.
In addition, this patch also addresses the issue of the legacy
implementation only producing 62 bits of pseudo randomness, while the
API requires all 64 bits to be random.
This pseudo-random number generator is not cryptographically secure -
just like lrand48().
Bugzilla ID: 114
Bugzilla ID: 276
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Claim the maintainership of the sub tree dpdk-next-net-mrvl,
which covers all the Marvell network PMDs.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Add the make and meson based build infrastructure along
with the mempool(NPA) device probe.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add the make and meson based build infrastructure along with
HW definition header file.
This patch adds skeleton otx2_mbox.c file to make sure
all header files are intact, subsequent patches add content
to otx2_mbox.c
This patch also updates CONFIG_RTE_MAX_VFIO_GROUPS
value to 128 as the system can have up to 128 PFs/VFs.
For octeontx2 meson build target, CONFIG_RTE_MAX_VFIO_GROUPS
defined as 128 so no additional changes required.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Xiaolong Ye will replace Beilei Xing as co-maintainer of
dpdk-next-net-intel.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
A script used with meson was missing in the list of files.
Fixes: 4c773788e0 ("build: generate Windows exports file")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Shared memory packet interface (memif) PMD allows for DPDK and any other
client using memif (DPDK, VPP, libmemif) to communicate using shared
memory. The created device transmits packets in a raw format. It can be
used with Ethernet mode, IP mode, or Punt/Inject. At this moment, only
Ethernet mode is supported in DPDK memif implementation. Memif is Linux
only.
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Alan is no longer involved in PMDs maintenance hence
update the list.
Also append new active maintainer to the list.
Signed-off-by: Liron Himi <lironh@marvell.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
IPC is a big part of secondary process infrastructure now,
and I have been de-facto maintainer for it since 18.05.
Update MAINTAINERS file to match.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reference to test/Makefile was forgotten when removing this file.
Reference to app/test/test_rcu* was forgotten when adding the files.
Fixes: a9de470cc7 ("test: move to app directory")
Fixes: b87089b0bb ("test/rcu: add API and functional tests")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Add RCU library supporting quiescent state based memory reclamation method.
This library helps identify the quiescent state of the reader threads so
that the writers can free the memory associated with the lock less data
structures.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Acked-by: Paul E. McKenney <paulmck@linux.ibm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Add the experimental tag back to the Rx event adapter callback,
the Rx event callback register and the Rx event adapter statistics
retrieval functions due to an API change to be proposed in a
future patch.
This patch also adds the experimental tag to these
function definitions and adds the functions to the EXPERIMENTAL
section of the map file, these were missing previously.
Fixes: 80bdf91dc8 ("eventdev: promote adapter functions as stable")
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Promote the adapter functions and rte_event_port_unlinks_in_progress()
as stable as it's been added for a while now and multiple drivers and
test application like test-eventdev has been tested using the adapter APIs.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Add a new PMD driver for AF_XDP which is a proposed faster version of
AF_PACKET interface in Linux. More info about AF_XDP, please refer to [1]
[2].
This is the vanilla version PMD which just uses a raw buffer registered as
the umem.
[1] https://fosdem.org/2018/schedule/event/af_xdp/
[2] https://lwn.net/Articles/745934/
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
stack_autotest performs positive and negative testing of the stack API, and
exercises the push and pop datapath functions with all available lcores.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
The new rte_stack library is derived from the mempool handler, so this
commit removes duplicated code and simplifies the handler by migrating it
to this new API.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
The rte_stack library provides an API for configuration and use of a
bounded stack of pointers. Push and pop operations are MT-safe, allowing
concurrent access, and the interface supports pushing and popping multiple
pointers at a time.
The library's interface is modeled after another DPDK data structure,
rte_ring, and its lock-based implementation is derived from the stack
mempool handler. An upcoming commit will migrate the stack mempool handler
to rte_stack.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Updated lib/meson.build to create shared libraries on Windows.
Added DEF files to list the exports for the eal and kvargs libraries.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Anand Rawat <anand.rawat@intel.com>
Reviewed-by: Pallavi Kadam <pallavi.kadam@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Harini Ramakrishnan <harini.ramakrishnan@microsoft.com>
Added initial stub source files and required meson changes
for Windows support.
kernel/windows/meson is a stub file added to support
Windows specific source in future releases.
Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Signed-off-by: Anand Rawat <anand.rawat@intel.com>
Reviewed-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Harini Ramakrishnan <harini.ramakrishnan@microsoft.com>
Succeed Chao Zhu as maintainer of EAL for IBM POWER.
Cc: stable@dpdk.org
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Add myself as co-maintainer for the timer library.
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Robert Sanford <rsanford@akamai.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Add test cases for ticket lock, recursive ticket lock,
and ticket lock performance.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The spinlock implementation is unfair, some threads may take locks
aggressively while leaving the other threads starving for long time.
This patch introduces ticketlock which gives each waiting thread a
ticket and they can take the lock one by one. First come, first serviced.
This avoids starvation for too long time and is more predictable.
Suggested-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
GitHub is a service used by developers to store repositories. GitHub
provides service integrations that allow 3rd party services to access
developer repositories and perform actions. One of these services is
Travis-CI, a simple continuous integration platform.
This series introduces the ability for any github mirrors of the DPDK
project, including developer mirrors, to kick off builds under the
travis CI infrastructure. For now, this just means compilation - no
other kinds of automated run exists yet. In the future, this can be
expanded to execute and report results for any test-suites that might
exist.
This is a simple initial implementation of a travis build for the DPDK
project. It doesn't require any changes from individual developers to
enable, but will allow those developers who opt-in to GitHub and the
travis service to get automatic builds for every push they make.
The files added under .ci/ exist so that in the future, other CI
support platforms (such as cirrus, appveyor, etc.) could have a common
place to put their requisite scripts without polluting the main tree.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Michael Santana <msantana@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The term "linuxapp" is a legacy one, but just calling the subdirectory
"linux" is just clearer for all concerned.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The term "bsdapp" is a legacy one, but just calling the subdirectory
"freebsd" is just clearer for all concerned.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Rename Intel Ethernet Adaptive Virtual Function driver avf to iavf.
This is the first patch which will only renames the directory name,
lib name, filenames and updates the new name in makefile and meson
files. Also updates the #include files in source files.
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
After today I will no longer be with Intel, so I am
removing my name from all related maintainer roles.
Signed-off-by: Remy Horton <remy.horton@intel.com>
Since all other apps have been moved to the "app" folder, the autotest app
remains alone in the test folder. Rather than having an entire top-level
folder for this, we can move it back to where it all started in early
versions of DPDK - the "app/" folder.
This move has a couple of advantages:
* This reduces clutter at the top level of the project, due to one less
folder.
* It eliminates the separate build task necessary for building the
autotests using make "make test-build" which means that developers are
less likely to miss something in their own compilation tests
* It re-aligns the final location of the test binary in the app folder when
building with make with it's location in the source tree.
For meson builds, the autotest app is different from the other apps in that
it needs a series of different test cases defined for it for use by "meson
test". Therefore, it does not get built as part of the main loop in the
app folder, but gets built separately at the end.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The bpf folder didn't actual contain a test application, but instead
basic examples of BPF code for use with testpmd. Therefore we can
move it to the `examples` folder. Being different, it also needs
a README with it, explaining what it is and how to use it. References
to the code from the testpmd docs are suitably updated.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Move to "app" directory and enable with meson build.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Move app to "app" directory and enable with meson build. For consistency of
naming, the subdirectory is also renamed from cmdline_test to test-cmdline.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Since compat library is only a single header, we can easily move it into
the EAL common headers instead of tracking it separately. The downside of
this is that it becomes a little more difficult to have any libs that are
built before EAL depend on it. Thankfully, this is not a major problem as
the only library which uses rte_compat.h and is built before EAL (kvargs)
already has the path to the compat.h header file explicitly called out as
an include path.
However, to ensure that we don't hit problems later with this, we can add
EAL common headers folder to the global include list in the meson build
which means that all common headers can be safely used by all libraries, no
matter what their build order.
As a side-effect, this patch also fixes an issue with building on BSD using
meson, due to compat lib no longer needing to be listed as a dependency.
Fixes: a8499f65a1 ("log: add missing experimental tag")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Tested-by: David Marchand <david.marchand@redhat.com>
Tested-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Natalie and Dmitri are no longer involved in PMDs maintenance hence
update the list.
Also append new active maintainers to the list.
Signed-off-by: Liron Himi <lironh@marvell.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
I've been unable to dedicate enough time to actively help in the
maintainership of the link bonding PMD, and as Chas is now actively
maintaining this PMD, I'm removing my name against it in the
MAINTAINERS file.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Unit test cases are added for pdump library.
Primary process will act as server, forks a child secondary process.
Secondary process acts as client.
Server will do pdump init to serve any pdump client requests.
Server will create a vdev, send/receive packets continuously
in a separate thread.
Client will create virtual rings to receive the packet dump.
Client sends pdump enable/disable requests using either port/device id.
Packet flow direction can be tx/rx/tx&rx.
In Server, appropriate pdump callbacks are triggered,
when packets are transmitted/received.
Pdump packet is copied to client rings.
Signed-off-by: Naga Suresh Somarowthu <naga.sureshx.somarowthu@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
The libraries provided by rdma-core may be statically linked
if enabling CONFIG_RTE_IBVERBS_LINK_STATIC in the make-based build.
If CONFIG_RTE_BUILD_SHARED_LIB is disabled, the applications
will embed the mlx PMDs with ibverbs and the mlx libraries.
If CONFIG_RTE_BUILD_SHARED_LIB is enabled,
the mlx PMDs will embed ibverbs and the mlx libraries.
Support with meson may be added later.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Add Yipeng and Sameh as additional maintainers.
Signed-off-by: Yipeng Wang <yipeng1.wang@intel.com>
Signed-off-by: Sameh Gobriel <sameh.gobriel@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The distributor library doesn't see much in the way of changes, and Dave
is well able to manage the library on his own, so remove my name against
it in the MAINTAINERS file.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Introduce librte_ipsec library.
The library is supposed to utilize existing DPDK crypto-dev and
security API to provide application with transparent IPsec processing API.
That initial commit provides some base API to manage
IPsec Security Association (SA) object.
Signed-off-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add the registers that comprise the Intel(R) 800
Series NIC. There is no functionality in this patch.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Added:
- initial version of compression performance test
description file.
- release note in release_18_11.rst
Updated index.rst file
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
Acked-by: Shally Verma <shally.verma@caviumnetworks.com>
Following Marvell's acquisition of Cavium, we need to update all the
Cavium maintainer's entries to point to our new e-mail addresses.
Update maintainers as they are no longer working for Cavium.
Thanks to Harish Patil for his support and development of our various
dpdk drivers.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
This RPM recipe is not well maintained and probably not used a lot.
Each distribution has its own constraints and recipes.
It may not be a good idea to try maintaining packaging recipes in
the project itself.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
rte_security has been experimental since DPDK 17.11 release.
Now the library has matured and expermental tag is removed in
this patch.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Boris Pismenny <borisp@mellanox.com>
Removed the use of MAP_HUGETLB for anonymous mapping on ppc64. The
MAP_HUGETLB had previously been added to workaround issues on IBM Power8
systems when mapping /dev/zero.
In the current code the MAP_HUGETLB flag will cause the anonymous mapping
to fail on Power9.
Note, Power8 is currently failing to correctly mmap Hugepages, with and
without this change.
Fixes: 284ae3e9ff ("eal/ppc: fix mmap for memory initialization")
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Reviewed-by: Pradeep Satyanarayana <pradeep@us.ibm.com>
Added FIPS application into the examples to allow
users to use a simple sample app to validate
their systems and be able to get FIPS certification.
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Reviewed-by: Akhil Goyal <akhil.goyal@nxp.com>
Unit testcases are added for metrics library
Added metrics unit test to autotest list
Updated meson build file
Updated MAINTAINERSHIP for metrics unit test
Signed-off-by: Hari Kumar Vemula <hari.kumarx.vemula@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Remy Horton <remy.horton@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
This patch adds all documentation for telemetry.
A description on how to use the Telemetry API with a DPDK
application is given in this document.
It also adds a release notes update for telemetry.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Signed-off-by: Brian Archbold <brian.archbold@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
This patch adds a python script which can be used as a demo
client. The script is interactive and will allow the user to
register, request statistics, and unregister.
To run the script, an argument for the client file path must
be passed in: "python telemetry_client.py <file_path>".
This script is useful to see how the Telemetry API for DPDK
is used, and how to make the initial connection.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Signed-off-by: Brian Archbold <brian.archbold@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
This patch adds the infrastructure and initial code for the telemetry
library.
The telemetry init is registered with eal_init(). We can then check to see
if --telemetry was passed as an eal option. If --telemetry was parsed, then
we call telemetry init at the end of eal init.
Control threads are used to get CPU cycles for telemetry, which are
configured in this patch also.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Signed-off-by: Brian Archbold <brian.archbold@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
'OCTEON TX' is the registered name. All other usages need to be fixed.
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Makefile/meson build infrastructure, atl_ethdev minimal skeleton,
header with aquantia aQtion NIC device and vendor IDs.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
add caam jr driver details, supported features and algorithms
in the document.
release note and MAINTAINERS are also updated.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The caam_jr poll mode crypto driver is supported for
NXP SEC 4.x+ (CAAM) hardware accelerator.
This driver is by default supported on LE platforms,
if it is used on BE platforms like LS104X,
config option CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE can be
enabled.
This patch add skeleton for caam jobring driver
with probe and uintialisation functions
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
A common library, valid for dpaaX drivers, which is used to maintain
a local copy of PA->VA translations.
In case of physical addressing mode (one of the option for FSLMC, and
only option for DPAA bus), the addresses of descriptors Rx'd are
physical. These need to be converted into equivalent VA for rte_mbuf
and other similar calls.
Using the rte_mem_virt2iova or rte_mem_virt2phy is expensive. This
library is an attempt to reduce the overall cost associated with
this translation.
A small table is maintained, containing continuous entries
representing a continguous physical range. Each of these entries
stores the equivalent VA, which is fed during mempool creation, or
memory allocation/deallocation callbacks.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The vdpa sample application creates vhost-user sockets by using the
vDPA backend. vDPA stands for vhost Data Path Acceleration which utilizes
virtio ring compatible devices to serve virtio driver directly to enable
datapath acceleration. As vDPA driver can help to set up vhost datapath,
this application doesn't need to launch dedicated worker threads for vhost
enqueue/dequeue operations.
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add enetc usage document to compile and run the
DPDK application on enetc supported platform.
This document introduces the enetc driver, supported
platforms and supported features.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add simple unit tests to test external memory support.
The tests are pretty basic and mostly consist of checking
if invalid API calls are handled correctly, plus a simple
allocation/deallocation test for malloc and memzone.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Santosh Shukla no longer associated with Cavium.
Update the octeontx driver code maintainership.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add programmer's guide doc to explain the use of the
Event Ethernet Tx Adapter library.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This patch adds tests for the eth Tx adapter APIs. It also
tests the data path for the rte_service function based
implementation of the APIs.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The ethernet Tx adapter abstracts the transmit stage of an
event driven packet processing application. The transmit
stage may be implemented with eventdev PMD support or use a
rte_service function implemented in the adapter. These APIs
provide a common configuration and control interface and
an transmit API for the eventdev PMD implementation.
The transmit port is specified using mbuf::port. The transmit
queue is specified using the rte_event_eth_tx_adapter_txq_set()
function.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The DSW event device is documented in DPDK Programmer's Guide.
The MAINTAINERS file and the 18.11 release notes are updated.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This patch contains the Meson and GNU Make build system extensions
required for the Distributed Event Device, and also the initialization
code for the driver itself.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The awk code previously read inline in checkpatches.sh
was using -d which is a bash option,
while bash is not the default shell in all distributions.
Now moved to be read from a separate file.
Signed-off-by: Arnon Warshavsky <arnon@qwilt.com>
Acked-by: Andrzej Ostruszka <amo@semihalf.com>
Add MVEP (Marvell Embedded Processors) to drivers/common which
will keep code reused by current and future MRVL PMDs.
Right now we have only common DMA memory initialization routines there.
Signed-off-by: Liron Himi <lironh@marvell.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Reviewed-by: Natalie Samsonov <nsamsono@marvell.com>
Claim the maintainership as Jianbo Liu is not working on this any more.
Aslo remove the co-maintainership for Marvel mvpp2 amd mrvl crypto driver
and doc.
Cc: stable@dpdk.org
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Song Zhu <song.zhu@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
I will no longer be maintaining szedata2 PMD.
Jan will take over this role.
Signed-off-by: Matej Vido <matejvido@gmail.com>
Acked-by: Jan Remes <remes@netcope.com>
Add Octeontx ZIP PMD feature specification and user guide
with build and run instructions.
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Sunila Sahu <sunila.sahu@caviumnetworks.com>
Octentx zipvf PMD provides hardware acceleration for
deflate and lzs compression and decompression operations
using Octeontx zip co-processor, which provide 8
virtualized zip devices.
This patch add basic initialization routine to register zip VFs
to compressdev library.
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Sunila Sahu <sunila.sahu@caviumnetworks.com>
Add zlib pmd feature support and user guide with
build and run instructions
Signed-off-by: Sunila Sahu <sunila.sahu@caviumnetworks.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>
Add initial PMD setup routines in compressdev
framework. ZLIB PMD appears as virtual compression
device. User would need to install zlib prior to
enabling this PMD.
Signed-off-by: Sunila Sahu <sunila.sahu@caviumnetworks.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>
Add Makefiles, meson files, and empty source files for compression PMD.
Handle cases for building either symmetric crypto PMD
or compression PMD or both and the common files both depend on.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Recently, some additional patches were added to allow for programmatic
marking of C symbols as experimental. The addition of these markers is
dependent on the manual addition of exported symbols to the EXPERIMENTAL
section of the corresponding libraries version map file. The consensus
on review is that, in addition to mandating the addition of symbols to
the EXPERIMENTAL version in the map, we need a mechanism to enforce our
documented process of mandating that addition when they are introduced.
To that end, I am proposing this change. It is an addition to the
checkpatches script, which scan incoming patches for additions and
removals of symbols to the map file, and warns the user appropriately.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
The driver supports Hyper-V networking directly like
virtio for KVM or vmxnet3 for VMware.
This code is based off of the FreeBSD driver. The file and variable
names are kept the same to help with understanding (with most of the
BSD style warts removed).
This version supports the latest NetVSP 6.1 version and
older versions.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
This patch adds support for an additional bus type Virtual Machine BUS
(VMBUS) on Microsoft Hyper-V in Windows 10, Windows Server 2016
and Azure. Most of this code was extracted from FreeBSD and some of
this is from earlier code donated by Brocade.
Only Linux is supported at present, but the code is split
to allow future FreeBSD and Windows support.
The bus support relies on the uio_hv_generic driver from Linux
kernel 4.16. Multiple queue support requires additional sysfs
interfaces which is in kernel 5.0 (a.k.a 4.17).
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Introduce a suite of autotests to cover functionality of fbarray.
This will check for invalid parameters, check API return values and
errno codes, and will also do some basic functionality checks on the
indexing code.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Given its very good contributions to this library, add Andrew as
official maintainer for librte_mempool.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
- moved common qat files to common/qat dir.
- changed common/qat/Makefile, common/qat/meson.build,
drivers/Makefile, crypto/Makefile
to add possibility of using new files locations
- added README file into crypto/qat to clarify where
the build is made from
- updated MAINTAINERS file
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Ferruh and Andrew are doing excellent reviews and contributions
to ethdev API.
They become official maintainers and responsibles of this major lib.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Xiaoyun Li has agreed to take over the maintainership of example
application tep_termination, as Jijiang Liu is no longer working
on that.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
For subtree of dpdk-next-net-intel, Qi Zhang has agreed to take
the committer role, to replace Helin Zhang. Also Beilei Xing has
agreed to be the backup committer of the subtree.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Make the compiler switch name and document name consistent as ``ifc`` to
avoid confusion. Also rename the map file to standard name for meson
build in the process.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Add Tiwei and Zhihong as co-maintainers for the Vhost and
Virtio components. They have done great contributions recently,
and been very helpful in helping to review Vhost and Virtio series.
Also, add Tiwei as backup for the Next-virtio tree.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Tiwei Bie <tiwei.bie@intel.com>
Acked-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Zhiyong Yang <zhiyong.yang@intel.com>
Tetsuya has kindly agreed to handover the maintainership
for the Vhost PMD. Thanks to him for his contributions.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Tetsuya Mukawa <mtetsuyah@gmail.com>
Add myself as co-maintainer for bonding driver and related materials.
Signed-off-by: Chas Williams <chas3@att.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The script check-symbol-maps.sh finds the symbols exported
in a map file but not referenced in the codebase.
Suggested-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
To simplify testing with the meson and ninja builds, we can add a script
to set up and do multiple builds. Currently this script sets up:
* clang and gcc builds
* builds using static and shared linkage for binaries (libs are always
built as both)
* a build using the lowest instruction-set level for x86 (-march=nehalem)
* cross-builds for each cross-file listed in config/arm
Each build is configured in a directory ending in *-build, and then for
the build stage, we just call ninja in each directory in turn. [i.e. we
assume every directory starting with "build-" is a meson build, which is
probably an ok assumption].
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
I have unfortunately no longer time enough for maintaining Tap PMD.
Keith has kindly volunteered to take over maintainership. He's been at
the origin of this PMD and knows well how it works.
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
- add EXPERIMENTAL tag for the section in MAINTAINERS.
- add EXPERIMENTAL tag to BPF public API files.
- add attribute __rte_experimental to BPF public API declarations.
Fixes: 94972f35a0 ("bpf: add BPF loading and execution framework")
Fixes: 5dba93ae5f ("bpf: add ability to load eBPF program from ELF object file")
Fixes: a93ff62a89 ("bpf: introduce basic Rx/Tx filters")
Reported-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add few simple eBPF programs as an example.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
librte_bpf provides a framework to load and execute eBPF bytecode
inside user-space dpdk based applications.
It supports basic set of features from eBPF spec
(https://www.kernel.org/doc/Documentation/networking/filter.txt).
Not currently supported features:
- JIT
- cBPF
- tail-pointer call
- eBPF MAP
- skb
- function calls for 32-bit apps
- mbuf pointer as input parameter for 32-bit apps
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds Intel FPGA Open Programmable Acceleration
Engine (OPAE)[1] base driver code, in order to support Intel
FPGA devices under DPDK. The base code currently supports
Intel FPGA solutions including integrated solution (Intel(R)
Xeon(R) CPU with FPGAs) and discrete solution (Intel(R)
Programmable Acceleration Card with Intel(R) Arria(R) 10 FPGA)
and it could be extended to support more FPGA devices in the
future. Please refer to [1][2] for more introduction on OPAE
and Intel FPGAs.
[1] https://01.org/OPAE
[2] https://www.altera.com/solutions/acceleration-hub/overview.html
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Signed-off-by: Hao Wu <hao.wu@intel.com>
Signed-off-by: Yilun Xu <yilun.xu@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Defined FPGA-BUS for Acceleration Drivers of AFUs
1. FPGA PCI Scan (1st Scan) follows DPDK UIO/VFIO PCI Scan Process,
probe Intel FPGA Rawdev Driver, it will be covered in following patches.
2. AFU Scan(2nd Scan) bind DPDK driver to FPGA Partial-Bitstream.
This scan is trigged by hotplug of IFPGA Rawdev probe, in this scan
the AFUs will be created and their drivers are also probed.
This patch will introduce rte_afu_device which describe the AFU device
listed in the FPGA-BUS.
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
This adds general compression drivers feature guide
as well as the ISA-L PMD documentation and guide.
Signed-off-by: Lee Daly <lee.daly@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Adding basic skeleton of the ISA-L compression driver.
No compression functionality, but lays the foundation for
operations in the rest of the patchset.
The ISA-L compression driver utilizes Intel's ISA-L compression
library and compressdev API.
Signed-off-by: Lee Daly <lee.daly@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This commit introduces the initial tests for compressdev,
performing basic compression and decompression operations
of sample test buffers, using the Zlib library in one direction
and compressdev in another direction, to make sure that
the library is compatible with Zlib.
Due to the use of Zlib API, the test is disabled by default,
to avoid adding a new dependency on DPDK.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
Add basic functions to manage compress devices,
including driver and device allocation, and the basic
interface with compressdev PMDs.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>
Picking a company stock ticker for a PMD name might not be a best approach
in a long run since name is too generic.
This patch addresses that and renames mrvl to mvsam.
Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Add entries in the programmer's guide, API index, maintainer's file
and release notes for the event crypto adapter.
Signed-off-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Added testsuite to test the crypto adapter functionality.
The testsuite detects the HW/SW event & crypto devices and
their capabilities. Depending upon the capability, adapter
is confgured and modes are tested.
Signed-off-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch introduces event crypto adapter APIs. It
also provides information on working model/adapter
modes & their usage. Application is expected to use
this interface to transfer packets between the crypto
device & the event device.
Signed-off-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
DPAA2 QDMA driver uses MC DPDMAI object. This driver enables
the user (app) to perform data DMA without involving CPU in
the DMA process
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Commits for bbdev and security libraries are merged
into the Next Crypto subtree.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Claim maintainership of all areas of EAL memory init, including
OS-specific parts of it.
Also, claim maintainership of fbarray, since although it's not
related to memory allocation, it is heavily used by it and its
primary purpose is to serve memory allocation functions, and
thus will appear under "memory allocation" banner.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Library folder name and output library name are same except a few flaws
including librte_ether.
This library is network device abstraction layer, the name "ethdev" fits
better than "ether", and library & header files already named as ethdev.
Also there is a rte_ether.h in the net library which can cause confusion.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Jacek will no longer be maintaining mvpp2 net PMD.
Special thanks to him for his development and support.
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
The IFCVF vDPA (vhost data path acceleration) driver provides support for
the Intel FPGA 100G VF (IFCVF). IFCVF's datapath is virtio ring compatible,
it works as a HW vhost backend which can send/receive packets to/from
virtio directly by DMA.
Different VF devices serve different virtio frontends which are in
different VMs, so each VF needs to have its own DMA address translation
service. During the driver probe a new container is created, with this
container vDPA driver can program DMA remapping table with the VM's memory
region information.
Key vDPA driver ops implemented:
- ifcvf_dev_config:
Enable VF data path with virtio information provided by vhost lib,
including IOMMU programming to enable VF DMA to VM's memory, VFIO
interrupt setup to route HW interrupt to virtio driver, create notify
relay thread to translate virtio driver's kick to a MMIO write onto HW,
HW queues configuration.
- ifcvf_dev_close:
Revoke all the setup in ifcvf_dev_config.
Live migration feature is supported by IFCVF and this driver enables
it. For the dirty page logging, VF helps to log for packet buffer write,
driver helps to make the used ring as dirty when device stops.
Because vDPA driver needs to set up MSI-X vector to interrupt the
guest, only vfio-pci is supported currently.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The manager provides a way to allocate physically and virtually
contiguous set of objects.
Signed-off-by: Artem V. Andreev <artem.andreev@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
This commit removes the experimental tags from the
service cores functions, they now become part of the
main DPDK API/ABI.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The current test will not be compatible anymore with a private
devargs list.
Moreover, the new functions should have new tests, while the existing
API will be removed.
The current unit tests are thus obsolete and hereby removed.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Jacek will no longer be maintaining mrvl crypto PMD.
Special thanks to him for development and support.
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
The virtio crypto device is a virtual cryptography device
as well as a kind of virtual hardware accelerator for
virtual machines. The linux kernel virtio-crypto driver
has been merged, and this patch introduces virtio crypto
PMD to achieve better performance.
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Reviewed-by: Fan Zhang <roy.fan.zhang@intel.com>
Fix logical/alphabetical ordering, spacing, and syntax typo.
Fixes: 8fb3b25760 ("maintainers: call out subtree committers")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
On Octeontx HW, each event timer device is enumerated as separate SRIOV VF
PCIe device.
In order to expose as a event timer device:
On PCIe probe, the driver stores the information associated with the
PCIe device and later when application requests for a event timer device
through `rte_event_timer_adapter_create` the driver infrastructure creates
the timer adapter with earlier probed PCIe VF devices.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Event devices can be coupled with various components to provide
new event sources by using event adapters. The event timer adapter
is one such adapter; it bridges event devices and timer mechanisms.
This library extends the event-driven programming model by
introducing a new type of event that represents a timer expiration,
and it provides APIs with which adapters can be created or destroyed
and event timers can be armed and canceled.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This patch adds vhost_crypto sample application to DPDK.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Jay Zhou <jianjay.zhou@huawei.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The MAINTAINERS file contains information of the maintainers
of the different components on DPDK.
However, it does not give any information on who maintains the
different subtrees which accept new commits for these components.
This commit adds a list of the subtree committers.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Move commonly used functions across mempool, event and net devices to a
common folder in drivers.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The name "mrvl" for Marvell PMD driver for PPv2 Marvell PPv2
(Packet Processor v2) 1/10 Gbps adapter is too generic and causes
problem for adding new PMD drivers for other Marvell devices.
Changed to "mvpp2" for specific Marvell PPv2 PMD.
This patch doesn't introduce any change except renaming.
Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch moves the kernel modules code from EAL to a common place.
- Separate the kernel module code from user space code.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
I will not be directly working on the DPDK project anymore.
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jiayu Hu <jiayu.hu@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The drivers directory contains some sub-directories
for each kind of device (or bus, mem):
net, crypto, event, raw
They are not suffixed with "dev" because it is obvious.
For consistency, the sub-directory drivers/bbdev/
is renamed to drivers/baseband/.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
All other apps in the app folder use "-" rather than "_" to separate words
in the app name, so rename proc_info to be consistent.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
I wrote pmdinfogen initially, and since there isn't a maintainer for it,
I'll volunteer to take care of it
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Skeleton rawdevice test cases are part of driver layer. This patch
allows test cases to be executed using 'rawdev_autotest' command
in test framework.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Skeleton rawdevice driver, on the lines of eventdev skeleton, is for
showcasing the rawdev library. This driver implements some of the
operations of the library based on which a test module can be
developed.
Design of skeleton involves a virtual device which is plugged into
VDEV bus on initialization.
Also, enable compilation of rawdev skeleton driver.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Each device in DPDK has a type associated with it - ethernet, crypto,
event etc. This patch introduces 'rawdevice' which is a generic
type of device, not currently handled out-of-the-box by DPDK.
A device which can be scanned on an installed bus (pci, fslmc, ...)
or instantiated through devargs, can be interfaced using
standardized APIs just like other standardized devices.
This library introduces an API set which can be plugged on the
northbound side to the application layer, and on the southbound side
to the driver layer.
The APIs of rawdev library exposes some generic operations which can
enable configuration and I/O with the raw devices. Using opaque
data (pointer) as API arguments, library allows a high flexibility
for application and driver implementation.
This patch introduces basic device operations like start, stop, reset,
queue and info support.
Subsequent patches would introduce other operations like buffer
enqueue/dequeue and firmware support.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
With the introduction of bus drivers, we now have a situation where
driver libraries will start to depend upon each other. Because of this,
the driver libs need to be discoverable by the dynamic loader.
There are three options to fix this:
1. Force the user to put the $libdir/dpdk/drivers folder into their
library path.
2. Move all libraries from drivers sub-directory to $libdir.
3. Symlink all libraries from the subfolder to the main library dir.
Option 1 is not great for usability or distro packaging, and option 2
means that we can't have EAL load all drivers from a known path
automatically (as it would error out on non-PMD libs), so option 3 was
chosen as the best fix. The only downside is that on a "ninja uninstall"
the symlinks are not removed, as they are unknown to meson/ninja.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Support compiling the FreeBSD kernel modules using meson and ninja.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Add the buildtools folder, and more specifically the pmdinfogen binary to
the meson and ninja build. This will be needed for building the PMDs in the
driver folder later, as the pmd info output from the tool needs to be
included in those libs.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
To build with meson and ninja, we need some initial infrastructure in
place. The build files for meson always need to be called "meson.build",
and options get placed in meson_options.txt
This commit adds a top-level meson.build file, which sets up the global
variables for tracking drivers, libraries, etc., and then includes other
build files, before finishing by writing the global build configuration
header file and a DPDK pkgconfig file at the end, using some of those same
globals.
From the top level build file, the only include file thus far is for the
config folder, which does some other setup of global configuration
parameters, including pulling in architecture specific parameters from an
architectural subdirectory. A number of configuration build options are
provided for the project to tune a number of global variables which will be
used later e.g. max numa nodes, max cores, etc. These settings all make
their way to the global build config header "rte_build_config.h". There is
also a file "rte_config.h", which includes "rte_build_config.h", and this
file is meant to hold other build-time values which are present in our
current static build configuration but are not normally meant for
user-configuration. Ideally, over time, the values placed here should be
moved to the individual libraries or drivers which want those values.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This tools reads the given version map for a directory, and checks to
ensure that, for each symbol listed in the export list, the corresponding
definition is tagged as __rte_experimental, erroring out if its not. In this
way, we can ensure that the EXPERIMENTAL api is kept in sync with the tags
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Simple functional test for rte_smp_mb() implementations.
Also when executed on a single lcore could be used as rough
estimation how many cycles particular implementation of rte_smp_mb()
might take.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This commit provides a set of tests for verifying the correctness and
performance of both unsigned 32 and 64bit reciprocal based division.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
This patch lays the groundwork for this driver (draft documentation,
copyright notices, code base skeleton and build system hooks). While it can
be successfully compiled and invoked, it's an empty shell at this stage.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Matan Azrad <matan@mellanox.com>
Rename eventdev_pipeline_sw_pmd to eventdev_pipeline as it is no longer
specific underlying event device.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Move software eventdev specific test (test_eventdev_sw) to
driver/event/sw/.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Move octeontx eventdev specific test (test_eventdev_octeontx.c) to
driver/event/octeontx.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add the description about opdl pmd
Signed-off-by: Liang Ma <liang.j.ma@intel.com>
Signed-off-by: Peter Mccarthy <peter.mccarthy@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
