Add description about the sample flow limitation.
Sample Flow supports in NIC-Rx and E-Switch domains.
Due to Metadata register c0 is deleted while doing the loopback,
so that only support forward the sampling packet into
E-Switch manager port, no additional action support in sample flow.
Add the offloads minimum versions for new sampling feature.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Translate the attribute of sample action that include sample ratio
and sub actions list.
PMD will check the destination action number in current flow,
if found multiple destination actions, then create the new destination
array rdma action that group actions for each destination.
Currently only support port or queue for destination action, and only
encap action can be attached into one port destination.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Mirroring flow using sample action with ratio is 1, and it doesn't
support jump action with the same one flow.
Sample action must have destination actions like port or queue for
mirroring, and don't need split function as sampling flow.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The new DR destination array action is supported since the
rdma-core version v32.
Destination array action is used group DR actions to a single action,
And it can be used for mirroring packet and forward to every
destination (port or queue) in the array.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Translate the attribute of sample action that include sample ratio
and sub actions list, then create the sample DR action.
The metadata register value will be lost in the default path after
Sampler in FDB due to CX5 HW limitation.
Since source vport also be shared with metadata register c0, MLX5
PMD would set the source vport to rdma-core and rdma-core will
restore the regc0 value after sampler.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The flow with sample action will be split into two sub flows:
the prefix sub flow with the all actions preceding the sample
action and sample action itself, and the suffix sub flow with
the actions following the sample action.
The original items remain in the prefix sub flow, add the
implicit tag action with unique id to set in metadata register,
and suffix sub flow uses the tag item to match with that unique id.
The flow split as below:
Original flow: items / actions pre / sample / actions sfx ->
prefix sub flow -
items / actions pre / set_tag action / sample
suffix sub flow -
tag_item / actions sfx
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Add sample action validate function.
Sample Flow is supported in NIC-RX and FDB domains. For the NIC-RX
the Sample Flow action list must include the destination queue action.
Only NIC-RX domain supports the optional actions list. FDB doesn't
support any optional actions, the sampled packets is always forwarded
to the E-Switch manager port.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Update function mlx5_devx_cmd_query_hca_attr() to add the NIC Flow
Table attributes query, then get the log_max_flow_sampler_num from
flow table properties.
Add the related structs definition in mlx5_prm.h.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The new DR sample action is supported since OFED version
5.1.2 or rdma-core version v32.
MLX5 PMD adds the rdma-core command in glue to create this action.
Sample action is used for creating the sample object to implement
the sampling/mirroring function.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Changed "net_pcap1;" to "net_pcap1," in order to make the command
correct.
Fixes: 53bf484034 ("net/pcap: capture only ingress packets from Rx iface")
Cc: stable@dpdk.org
Signed-off-by: Sarosh Arif <sarosh.arif@emumba.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Store function control window offset to correctly set the offset
of prime EvQ in EF100.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Flow rules may be used mark packets. Support delivery of mark/flag
values to user in mbuf fields.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Riverhead allows to choose Rx prefix (which contains RSS hash value
and valid flag) per queue.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Riverhead FW supports Rx prefix choice based on required fields in Rx
prefix. The feature is generalized in libefx to provide Rx prefixes
layout for other NICs and firmware variants. Now driver can get
the prefix layout after Rx queue start and use the layout details to
check its expectations or simply in run-time.
Rx prefix choice and query interface is defined in SF-119689-TC
EF100 host interface.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
If RSS hash offload is requested, Rx queue should be configured
to request RSS hash information delivery.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
A new function allows to check if used Rx prefix layout matches
available Rx prefix layout. Length check is out-of-scope of the
function and caller should ensure length is either checked or
different length with everything required in place is handled
properly.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
When Rx queue is created, allow to specify if the driver would like
to get RSS hash value calculated by the hardware.
Use the flag to choose Rx prefix on Riverhead.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Introduce an extra variable with required Rx prefix fields mask
to make it easier to request more fields.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Also support Rx packet type offload.
Checksumming is actually always enabled. Report it per-queue offload
to give applications maximum flexibility.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Handle VXLAN and Geneve TSO on EF100 native Tx datapath.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Riverhead boards support TSO version 3.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add support for outer IPv4/UDP and inner IPv4/UDP/TCP checksum offloads.
Use partial checksum offload for inner TCP/UDP offload.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
EF100 native Tx datapath demands that packet header be contiguous
when partial checksum offloads are used since helper function is
used to calculate pseudo-header checksum (and the function requires
contiguous header).
Add an explicit check for this assumption and restructure the code
to avoid TSO header linearisation check since TSO header
linearisation is not done on EF100 native Tx datapath.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add datapath log level which limits logs included in build since
on datapath it is too expensive to dive into rte_log() function
even if it does nothing.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
These callbacks are used when event queue is polled via libefx.
The libefx polling is used for management event queue, but we do not
expect any Tx complete events on it, and for datapath event queue at
flushing.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
These callbacks are used when event queue is polled via libefx.
The libefx polling is used for management event queue, but we do not
expect any Rx events on it, and for datapath event queue at flushing
(when these events are typically ignored, since queue is being stopped).
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Control window is required to talk to NIC.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
libefx usage may be limited to control path only and its
implementation of datapath may not support NIC family or
PMD efx Rx/Tx datapaths implementation may be not yet ported
to updated libefx.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Update generic code to check that MTU and Rx buffer sizes
do not result in more Rx scatter segments than NIC can make.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Riverhead QDMA has limitation on maximum number of Rx scatter
buffers to be used by a packet. If the limitation is violated,
the datapath is dead. FW should ensure that it is OK, but
drivers need to know the limitation anyway to check parameters
when Rx queues are configured and MTU is set.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Riverhead does not support LED control yet. It is perfectly
fine to ignore LED set failure because of no support if
configured LED mode is the default.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
For consistency it is better to have separate MCDI wrappers.
Make efx_phy_led_mode_t visible even if EFSYS_OPT_PHY_LED_CONTROL
is disabled to be able to use it in the added wrapper arguments.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Make ef10_phy_reconfigure() simpler to read and less error-prone.
Avoid confusing case when two MCDI's are called from one function.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
CONFIG_* variables were used by make-based build system which is
removed.
Fixes: 3cc6ecfdfe ("build: remove makefiles")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add a function to calculate the length of an IPv4 header as suggested
on the mailing list [1]. Call where appropriate.
[1] https://mails.dpdk.org/archives/dev/2020-October/184471.html
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Michael Pfeiffer <michael.pfeiffer@tu-ilmenau.de>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add a check for the return value of the sscanf call in
parse_internal_args(), returning an error if we don't get the expected
result.
Coverity issue: 362049
Fixes: 96cb195211 ("net/ring: use EAL APIs in PMD specific API")
Cc: stable@dpdk.org
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
