When a FUSE operation other than LOOKUP returns ENOENT, the kernel will
reclaim that vnode, resuling in a FUSE_FORGET being sent a short while
later. Many of the ENOENT tests weren't expecting those FUSE_FORGET
operations. They usually passed by luck since FUSE_FORGET is often delayed.
This commit adds appropriate expectations.
MFC after: 2 weeks
common_init_tbl is only used within this single CU, so it should be marked
static.
WARNS=6 also complained about the var defined by
`ATF_TC_WITH_CLEANUP(getastats);` being unused, which turns out to be
because it's not been hooked up in ATF_TP_ADD_TCS. kp@ did not immediately
recall any reason for this, and the case passes on my local system, so hook
it up.
Note that I've not yet set WARNS= 6 here. Investigation is underway to see
if we can feasibly default WARNS to 6 for src builds to catch directories
too deep to inherit a WARNS from the top-level subdirectories' Makefile.inc.
Those particular WARNS settings will be subsequently removed as they become
redundant with a more-global default.
MFC after: 1 week
The test makefiles will handle setting mode bits during install. Also,
Phabricator gets upset when uploading an executable plain-text file
without a shebang.
MFC after: 1 week
These two errors have been present since the tests' introduction.
Coincidentally every test (I think there's only one) that cares about that
field also works when the field's value is 0.
MFC after: 2 weeks
This test uses a gnop feature (delay probability) that isn't available on
stable/12. But it's unnecessary; the test works fine without it. Removing
it simplifies the test and, once MFCed, will allow it to pass on stable/12.
PR: 244158
Reported by: lwhsu
MFC after: 2 weeks
mac_bsdextended(4), when enabled, causes ordinary operations to send many
more VOP_GETATTRs to file system. The fusefs tests expectations aren't
written with those in mind. Optionally expecting them would greatly
obfuscate the fusefs tests. Worse, certain fusefs functionality (like
attribute caching) would be impossible to test if the tests couldn't expect
an exact number of GETATTR operations.
This commit resolves that conflict by making two changes:
1. The fusefs tests will now check for mac_bsdextended, and skip if it's
enabled.
2. The mac_bsdextended tests will now check whether the module is enabled, not
merely loaded. If it's loaded but disabled, the tests will automatically
enable it for the duration of the tests.
With these changes, a CI system can achieve best coverage by loading both
fusefs and mac_bsdextended at boot, and setting
security.mac.bsdextended.enabled=0
PR: 244229
Reported by: lwhsu
Reviewed by: cem
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24577
This removes support for the following algorithms:
- ARC4
- Blowfish
- CAST128
- DES
- 3DES
- MD5-HMAC
- Skipjack
Since /dev/crypto no longer supports 3DES, stop testing the 3DES KAT
vectors in cryptotest.py.
Reviewed by: cem (previous version)
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24346
We used to have an issue with recursive locking with
net.link.bridge.inherit_mac. This causes us to send an ARP request while
we hold the BRIDGE_LOCK, which used to cause us to acquire the
BRIDGE_LOCK again. We can't re-acquire it, so this caused a panic.
Now that we no longer need to acquire the BRIDGE_LOCK for
bridge_transmit() this should no longer panic. Test this.
PR: 216510
Reviewed by: emaste, philip
MFC after: 2 months
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24251
The new tests have more complete setup and cleanup, are more granular, and
correctly annotate expected failures and skipped tests. A follow-up commit
will resolve a conflict with the fusefs tests (bug 244229).
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24257
- Lookup device drivers to test by name instead of assuming that the
software / hardware flags will select specific drivers.
- Set the sysctl to permit software /dev/crypto requests when testing
the accelerated software blake2 driver.
PR: 245825
Reported by: lwhsu
Reviewed by: cem, lwhsu
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24540
There were ultimately two separate problems here:
- a 32-bit long cannot represent microseconds since 1970 (noted by ian)
- time_t is 32-bit on i386, so now() was wrong anyways even with the correct
return type.
For the first, just explicitly use a uint64_t for now() and all of the
callers. For the second, we need to explicitly cast tv_sec to uint64_t
before it gets multiplied in the SEC_TO_US macro. Casting this instance
rather than generally in the macro was arbitrarily chosen simply because all
other uses are converting small relative time values.
The tests now pass on i386, at least; presumably other ILP32 will be fine
now as well.
We used to have a problem where bridges created in different vnet jails
would end up having the same mac address. This is now fixed by
including the jail name as a seed for the mac address generation, but we
should verify that it doesn't regress.
Originally noticed while attempting to run the kqueue tests under
qemu-user-static, this apparently just happens sometimes when running in a
jail in general -- the timer will fire off "too early," but it's really just
the result of imprecise measurements (noted by cem).
Kicking this over to NOTE_USECONDS still tests the correct thing while
allowing it to work more consistently; a basic sanity test reveals that we
often end up coming in just less than 200 microseconds after the timer
fired off.
MFC after: 3 days
closefrom has been converted to close_range internally; remediation is
underway for this, marking it as an expected fail for now while proper
course is determined.
PR: 245625
Similar to mmap'ing vnodes, posixshm should count any mapping where maxprot
contains VM_PROT_WRITE (i.e. fd opened r/w with no write-seal applied) as
writable and thus blocking of any write-seal.
The memfd tests have been amended to reflect the fixes here, which notably
includes:
1. Fix for error return bug; EPERM is not a documented failure mode for mmap
2. Fix rejection of write-seal with active mappings that can be upgraded via
mprotect(2).
Reported by: markj
Discussed with: markj, kib
close_range will clamp the range between [0, fdp->fd_lastfile], but failed
to take into account that fdp->fd_lastfile can become -1 if all fds are
closed. =-( In this scenario, just return because there's nothing further we
can do at the moment.
Add a test case for this, fork() and simply closefrom(0) twice in the child;
on the second invocation, fdp->fd_lastfile == -1 and will trigger a panic
before this change.
X-MFC-With: r359836
close_range(min, max, flags) allows for a range of descriptors to be
closed. The Python folk have indicated that they would much prefer this
interface to closefrom(2), as the case may be that they/someone have special
fds dup'd to higher in the range and they can't necessarily closefrom(min)
because they don't want to hit the upper range, but relocating them to lower
isn't necessarily feasible.
sys_closefrom has been rewritten to use kern_close_range() using ~0U to
indicate closing to the end of the range. This was chosen rather than
requiring callers of kern_close_range() to hold FILEDESC_SLOCK across the
call to kern_close_range for simplicity.
The flags argument of close_range(2) is currently unused, so any flags set
is currently EINVAL. It was added to the interface in Linux so that future
flags could be added for, e.g., "halt on first error" and things of this
nature.
This patch is based on a syscall of the same design that is expected to be
merged into Linux.
Reviewed by: kib, markj, vangyzen (all slightly earlier revisions)
Differential Revision: https://reviews.freebsd.org/D21627
Set up three vnet jails, bridged together. Run carp between two of them.
Attempt to provoke locking / epoch issues.
Reviewed by: mav (previous version), melifaro, asomers
Differential Revision: https://reviews.freebsd.org/D24303
vnode_fd and kqfd are both shared among multiple CU; define them exactly
once.
In the case of vnode_fd, it was simply the declaration that needed
correction.
-fno-common will become the default in GCC10/LLVM11.
MFC after: 3 days
Many rtsock tests verify the ordering of the kernel messages for the
particular event. In order to avoid flaky tests due to the other tests
running, switch all tests to use personal vnet-enabled jails.
This removes all clashes on the IP addresses and brings back the ability
to run these tests simultaneously.
Reported by: olivier
Reviewed by: olivier
Differential Revision: https://reviews.freebsd.org/D24182
- The linked list of cryptoini structures used in session
initialization is replaced with a new flat structure: struct
crypto_session_params. This session includes a new mode to define
how the other fields should be interpreted. Available modes
include:
- COMPRESS (for compression/decompression)
- CIPHER (for simply encryption/decryption)
- DIGEST (computing and verifying digests)
- AEAD (combined auth and encryption such as AES-GCM and AES-CCM)
- ETA (combined auth and encryption using encrypt-then-authenticate)
Additional modes could be added in the future (e.g. if we wanted to
support TLS MtE for AES-CBC in the kernel we could add a new mode
for that. TLS modes might also affect how AAD is interpreted, etc.)
The flat structure also includes the key lengths and algorithms as
before. However, code doesn't have to walk the linked list and
switch on the algorithm to determine which key is the auth key vs
encryption key. The 'csp_auth_*' fields are always used for auth
keys and settings and 'csp_cipher_*' for cipher. (Compression
algorithms are stored in csp_cipher_alg.)
- Drivers no longer register a list of supported algorithms. This
doesn't quite work when you factor in modes (e.g. a driver might
support both AES-CBC and SHA2-256-HMAC separately but not combined
for ETA). Instead, a new 'crypto_probesession' method has been
added to the kobj interface for symmteric crypto drivers. This
method returns a negative value on success (similar to how
device_probe works) and the crypto framework uses this value to pick
the "best" driver. There are three constants for hardware
(e.g. ccr), accelerated software (e.g. aesni), and plain software
(cryptosoft) that give preference in that order. One effect of this
is that if you request only hardware when creating a new session,
you will no longer get a session using accelerated software.
Another effect is that the default setting to disallow software
crypto via /dev/crypto now disables accelerated software.
Once a driver is chosen, 'crypto_newsession' is invoked as before.
- Crypto operations are now solely described by the flat 'cryptop'
structure. The linked list of descriptors has been removed.
A separate enum has been added to describe the type of data buffer
in use instead of using CRYPTO_F_* flags to make it easier to add
more types in the future if needed (e.g. wired userspace buffers for
zero-copy). It will also make it easier to re-introduce separate
input and output buffers (in-kernel TLS would benefit from this).
Try to make the flags related to IV handling less insane:
- CRYPTO_F_IV_SEPARATE means that the IV is stored in the 'crp_iv'
member of the operation structure. If this flag is not set, the
IV is stored in the data buffer at the 'crp_iv_start' offset.
- CRYPTO_F_IV_GENERATE means that a random IV should be generated
and stored into the data buffer. This cannot be used with
CRYPTO_F_IV_SEPARATE.
If a consumer wants to deal with explicit vs implicit IVs, etc. it
can always generate the IV however it needs and store partial IVs in
the buffer and the full IV/nonce in crp_iv and set
CRYPTO_F_IV_SEPARATE.
The layout of the buffer is now described via fields in cryptop.
crp_aad_start and crp_aad_length define the boundaries of any AAD.
Previously with GCM and CCM you defined an auth crd with this range,
but for ETA your auth crd had to span both the AAD and plaintext
(and they had to be adjacent).
crp_payload_start and crp_payload_length define the boundaries of
the plaintext/ciphertext. Modes that only do a single operation
(COMPRESS, CIPHER, DIGEST) should only use this region and leave the
AAD region empty.
If a digest is present (or should be generated), it's starting
location is marked by crp_digest_start.
Instead of using the CRD_F_ENCRYPT flag to determine the direction
of the operation, cryptop now includes an 'op' field defining the
operation to perform. For digests I've added a new VERIFY digest
mode which assumes a digest is present in the input and fails the
request with EBADMSG if it doesn't match the internally-computed
digest. GCM and CCM already assumed this, and the new AEAD mode
requires this for decryption. The new ETA mode now also requires
this for decryption, so IPsec and GELI no longer do their own
authentication verification. Simple DIGEST operations can also do
this, though there are no in-tree consumers.
To eventually support some refcounting to close races, the session
cookie is now passed to crypto_getop() and clients should no longer
set crp_sesssion directly.
- Assymteric crypto operation structures should be allocated via
crypto_getkreq() and freed via crypto_freekreq(). This permits the
crypto layer to track open asym requests and close races with a
driver trying to unregister while asym requests are in flight.
- crypto_copyback, crypto_copydata, crypto_apply, and
crypto_contiguous_subsegment now accept the 'crp' object as the
first parameter instead of individual members. This makes it easier
to deal with different buffer types in the future as well as
separate input and output buffers. It's also simpler for driver
writers to use.
- bus_dmamap_load_crp() loads a DMA mapping for a crypto buffer.
This understands the various types of buffers so that drivers that
use DMA do not have to be aware of different buffer types.
- Helper routines now exist to build an auth context for HMAC IPAD
and OPAD. This reduces some duplicated work among drivers.
- Key buffers are now treated as const throughout the framework and in
device drivers. However, session key buffers provided when a session
is created are expected to remain alive for the duration of the
session.
- GCM and CCM sessions now only specify a cipher algorithm and a cipher
key. The redundant auth information is not needed or used.
- For cryptosoft, split up the code a bit such that the 'process'
callback now invokes a function pointer in the session. This
function pointer is set based on the mode (in effect) though it
simplifies a few edge cases that would otherwise be in the switch in
'process'.
It does split up GCM vs CCM which I think is more readable even if there
is some duplication.
- I changed /dev/crypto to support GMAC requests using CRYPTO_AES_NIST_GMAC
as an auth algorithm and updated cryptocheck to work with it.
- Combined cipher and auth sessions via /dev/crypto now always use ETA
mode. The COP_F_CIPHER_FIRST flag is now a no-op that is ignored.
This was actually documented as being true in crypto(4) before, but
the code had not implemented this before I added the CIPHER_FIRST
flag.
- I have not yet updated /dev/crypto to be aware of explicit modes for
sessions. I will probably do that at some point in the future as well
as teach it about IV/nonce and tag lengths for AEAD so we can support
all of the NIST KAT tests for GCM and CCM.
- I've split up the exising crypto.9 manpage into several pages
of which many are written from scratch.
- I have converted all drivers and consumers in the tree and verified
that they compile, but I have not tested all of them. I have tested
the following drivers:
- cryptosoft
- aesni (AES only)
- blake2
- ccr
and the following consumers:
- cryptodev
- IPsec
- ktls_ocf
- GELI (lightly)
I have not tested the following:
- ccp
- aesni with sha
- hifn
- kgssapi_krb5
- ubsec
- padlock
- safe
- armv8_crypto (aarch64)
- glxsb (i386)
- sec (ppc)
- cesa (armv7)
- cryptocteon (mips64)
- nlmsec (mips64)
Discussed with: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D23677
Change type of variable used in setsocketopt so correct size of
option is passed.
Test failure was identified when running the test on PowerPC64,
and the following error message was seen:
"bind () failed: Address already in use"
Submitted by: Fernando Valle <fernando.valle@eldorado.org.br>
Reviewed by: melifaro, adalava
Approved by: jhibbits (mentor)
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D24164
The FUSE protocol allows the client (kernel) to cache a file's size, if the
server (userspace daemon) allows it. A well-behaved daemon obviously should
not change a file's size while a client has it cached. But a buggy daemon
might. If the kernel ever detects that that has happened, then it should
invalidate the entire cache for that file. Previously, we would not only
cache stale data, but in the case of a file extension while we had the size
cached, we accidentally extended the cache with zeros.
PR: 244178
Reported by: Ben RUBSON <ben.rubson@gmx.com>
Reviewed by: cem
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24012
Basic test case where we create a bridge loop, verify that we really are
looping and then enable spanning tree to resolve the loop.
Reviewed by: philip
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23959
We were reusing a structure for multiple operations, but failing to
reinitialize one member. The result is that a server that cares about FUSE
file handle IDs would see one correct FUSE_FSYNC operation, and one with the
FHID unset.
PR: 244431
Reported by: Agata <chogata@gmail.com>
MFC after: 2 weeks
Very basic bridge test: Set up two jails and test that they can pass IPv4
traffic over the bridge.
Reviewed by: melifaro, philip
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23697
As with the rest of pjdfstest, tag the symlink with package=tests.
The tests -> . symlink seems a little strange but that's independent
of pkgbase.
Sponsored by: The FreeBSD Foundation
kldload() returns a positive integer when it loads a ko, so check that the
return value is -1 to detect error cases, not that it's different from zero.
MFC after: 3 days
X-MFC-With: r357234
kldload() returns an error (EEXIST) if the module is already loaded.
That's not a problem for us, so ignore that error.
While here also clean up include statements.
MFC after: 3 days
X-MFC-With: r357234
The horrific GENRAND construction bent over backwards to construct 64-bit
signed integers from the 31-bit output of random(3) for about 20 numbers per
test. Reproducibility wasn't a goal: random(3) was seeded with
srandomdev(3). Speed is not a factor for generating 20 integers with
arc4random(3). Range is not a factor: all uses did not bound the range
beyond that of the full [INT64_MIN, INT64_MAX]. Just use arc4random(3).
Reported by: Coverity
CIDs: 1404809, 1404817, 1404838, 1404840 and about 6x other
identical reports of dubious code relating to the
construction
if_epair abused the ifr_data field to insert its second interface in
IFC_IFLIST. If userspace provides a value for ifr_data it would get
dereferenced by the kernel leading to a panic.
Reported by: Ilja Van Sprundel <ivansprundel@ioactive.com>
MFC after: 3 days
The routing subdirectory installed into the same directory as the test tests,
which caused them to overwrite the net Kyuafile. As a result these tests were
not executed.
X-MFC-With: r356146
Redirect (and temporal) route expiration was broken a while ago.
This change brings route expiration back, with unified IPv4/IPv6 handling code.
It introduces net.inet.icmp.redirtimeout sysctl, allowing to set
an expiration time for redirected routes. It defaults to 10 minutes,
analogues with net.inet6.icmp6.redirtimeout.
Implementation uses separate file, route_temporal.c, as route.c is already
bloated with tons of different functions.
Internally, expiration is implemented as an per-rnh callout scheduled when
route with non-zero rt_expire time is added or rt_expire is changed.
It does not add any overhead when no temporal routes are present.
Callout traverses entire routing tree under wlock, scheduling expired routes
for deletion and calculating the next time it needs to be run. The rationale
for such implemention is the following: typically workloads requiring large
amount of routes have redirects turned off already, while the systems with
small amount of routes will not inhibit large overhead during tree traversal.
This changes also fixes netstat -rn display of route expiration time, which
has been broken since the conversion from kread() to sysctl.
Reviewed by: bz
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D23075
Linux expects to be able to use posix_fallocate(2) on a memfd. Other places
would use this with shm_open(2) to act as a smarter ftruncate(2).
Test has been added to go along with this.
Reviewed by: kib (earlier version)
Differential Revision: https://reviews.freebsd.org/D23042
This re-enables building the googletest suite by default on mips and instead
specifically doesn't build fusefs tests for mips+clang builds. clang will
easily spent >= 1.5 hours compiling a single file due to a bug in
optimization (see LLVM PR 43263), so turn these off for now while that's
hashed out.
GCC builds are unaffected and build the fusefs tests as-is. Clang builds
only happen by early adopters attempting to hash out the remaining issues.
The comment has been updated to reflect its new position and use less strong
wording about imposing on people.
Discussed with: ngie, asomers
Reviewed by: ngie
Add ATF tests for most gmultipath operations. Add some dtrace probes too,
primarily for configuration changes that happen in response to provider
errors.
PR: 178473
MFC after: 2 weeks
Sponsored by: Axcient
Differential Revision: https://reviews.freebsd.org/D22235
The debugger like truss(1) depends on the wait(2) syscall. This syscall
waits for ALL children. When it is waiting for ALL child's the children
created by process descriptors are not returned. This behavior was
introduced because we want to implement libraries which may pdfork(1).
The behavior of process descriptor brakes truss(1) because it will
not be able to collect the status of processes with process descriptors.
To address this problem the status is returned to parent when the
child is traced. While the process is traced the debugger is the new parent.
In case the original parent and debugger are the same process it means the
debugger explicitly used pdfork() to create the child. In that case the debugger
should be using kqueue()/pdwait() instead of wait().
Add test case to verify that. The test case was implemented by markj@.
Reviewed by: kib, markj
Discussed with: jhb
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D20362
We have -Werror=strict-overflow so gcc complains:
In file included from /tmp/obj/workspace/src/amd64.amd64/tmp/usr/include/bitstring.h:36:0,
from /workspace/src/tests/sys/sys/bitstring_test.c:34:
/workspace/src/tests/sys/sys/bitstring_test.c: In function 'bit_ffc_at_test':
/workspace/src/sys/sys/bitstring.h:239:5: error: assuming signed overflow does not occur when assuming that (X + c) >= X is always true [-Werror=strict-overflow]
if (_start >= _nbits) {
^
Disable assuming overflow of signed integer will never happen by specifying
-fno-strict-overflow
Sponsored by: The FreeBSD Foundation
should identify accurately which function exhibited the bug.
Reviewed by: asomers
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22519
r354991 removed variable-sized object initializing on defining. For the safe
reason, manually initialize the members to 0.
Sponsored by: The FreeBSD Foundation
Add bit_ffs_area_at and bit_ffc_area_at functions for searching a bit
string for a sequence of contiguous set or unset bits of at least the
specified size.
The bit_ffc_area function will be used by the Intel ice driver for
implementing resource assignment logic using a bitstring to represent
whether or not a given index has been assigned or is currently free.
The bit_ffs_area, bit_ffc_area_at and bit_ffs_area_at functions are
implemented for completeness.
I'd like to add further test cases for the new functions, but I'm not
really sure how to add them easily. The new functions depend on specific
sequences of bits being set, while the bitstring tests appear to run for
varying bit sizes.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: asomers@, erj@
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D22400
bit_ffs_at and bit_ffc_at both take _start parameters which indicate to
start searching from _start onwards.
If the given _start index is past the size of the bit string, these
functions will calculate an address of the current bitstring which is
after the expected size. The function will also dereference the memory,
resulting in a read buffer overflow.
The output of the function remains correct, because the tests ensure to
stop the loop if the current bitstring chunk passes the stop bitstring
chunk, and because of a check to ensure the reported _value is never
past _nbits.
However, if <sys/bitstring.h> is ever used in code which is checked by
-fsanitize=undefined, or similar static analysis, it can produce
warnings about reading past the buffer size.
Because of the above mentioned checks, these buffer overflows do not
occur as long as _start is less than _nbits. Additionally, by definition
bit_ffs_at and bif_ffc_at should set _result to -1 in any case where the
_start is after the _nbits.
Check for this case at the start of the function and exit early if so,
preventing the buffer read overflow, and reducing the amount of
computation that occurs.
Note that it may seem odd to ever have code that could call bit_ffc_at
or bit_ffs_at with a _start value greater than _nbits. However, consider
a for-loop that used bit_ffs and bit_ffs_at to loop over a bit string
and perform some operation on each bit that was set. If the last bit of
the bit string was set, the simplest loop implementation would call
bit_ffs_at with a start of _nbits, and expect that to return -1. While
it does infact perform correctly, this is what ultimately triggers the
unexpected buffer read overflow.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: asomers@, erj@
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D22398
After r354748 mld_input() can change the mbuf. The new pointer
is never returned to icmp6_input() and when passed to
icmp6_rip6_input() the mbuf may no longer valid leading to
a panic.
Pass a pointer to the mbuf to mld_input() so we can return an
updated version in the non-error case.
Add a test sending an MLD packet case which will trigger this bug.
Pointyhat to: bz
Reported by: gallatin, thj
MFC After: 2 weeks
X-MFC with: r354748
Sponsored by: Netflix
Co-mingling two things here:
* Addressing some feedback from Konstantin and Kyle re: jail,
capability mode, and a few other things
* Adding audit support as promised.
The audit support change includes a partial refresh of OpenBSM from
upstream, where the change to add shm_rename has already been
accepted. Matthew doesn't plan to work on refreshing anything else to
support audit for those new event types.
Submitted by: Matthew Bryan <matthew.bryan@isilon.com>
Reviewed by: kib
Relnotes: Yes
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D22083
RFC 8200 says:
"If the fragment is a whole datagram (that is, both the Fragment
Offset field and the M flag are zero), then it does not need
any further reassembly and should be processed as a fully
reassembled packet (i.e., updating Next Header, adjust Payload
Length, removing the Fragment header, etc.). .."
That means we should remove the fragment header and make all the adjustments
rather than just skipping over the fragment header. The difference should
be noticeable in that a properly handled atomic fragment triggering an ICMPv6
message at an upper layer (e.g. dest unreach, unreachable port) will not
include the fragment header.
Update the test cases to also test for an unfragmentable part. That is
needed so that the next header is properly updated (not just lengths).
MFC after: 3 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D22155
Remove mentions of fragmentation tests from extension header test.
Remove setting an MTU > IF_MAXMTU from the test cases to avoid warnings;
this was only possible in a local research tree.
MFC after: 2 weeks
Sponsored by: Netflix
Add a simple test case which can exercise some of the IPv6 extension
header code paths. At the moment only a small set of extension headers
is implemented and no options to the ones which take them.
Also implements a "bad" case to make sure that error handling works.
The tests were used to test m_pullup() changes to the code paths while
removing the KAME PULLDOWN_TEST cases and related macros.
MFC after: 3 weeks
Sponsored by: Netflix
There are times when we have to wait for reply packets. There are
either an ICMPv6 (error) reply or the expiration timeout.
In these cases synchonous ICMPv6 replies should arrive, always,
unless the packet is lost. Due to errors experienced with the
test software sending an invlaid request on at least i386 (*) these
packets are not generated. That means we are waiting for a long time
for the replies or even timeout the test case.
Manually set the "End" flag on these test cases as well, so they do
fail rather than timeout as the sniffer timeout happens. This improves
debugging options, reflects the error properly, and saves time on each
test suit run.
(*) The real cause for that is still to be found (see the referenced PRs)
PR: 241493, 239380
MFC after: 2 weeks
Sponsored by: Netflix
stderr:
Traceback (most recent call last):
File "/usr/tests/sys/netpfil/common/pft_ping.py", line 135, in <module>
main()
File "/usr/tests/sys/netpfil/common/pft_ping.py", line 124, in main
ping(args.sendif[0], args.to[0], args)
File "/usr/tests/sys/netpfil/common/pft_ping.py", line 74, in ping
raw = sp.raw(str(PAYLOAD_MAGIC))
File "/usr/local/lib/python3.6/site-packages/scapy/compat.py", line 52, in raw
return bytes(x)
TypeError: string argument without an encoding
MFC with: r354121
Sponsored by: The FreeBSD Foundation
In order to move python2 out of the test framework to avoid py2 vs. py3
confusions upgrade the remaining test cases using scapy to work with py3.
That means only one version of scapy needs to be installed in the CI system.
It also gives a path forward for testing i386 issues observed in the CI
system with some of these tests.
Fixes are:
- Use default python from environment (which is 3.x these days).
- properly ident some lines as common for the rest of the file to avoid
errors.
- cast the calculated offset to an int as the division result is considered
a float which is not accepted input.
- when comparing payload to a magic number make sure we always add the
payload properly to the packet and do not try to compare string in
the result but convert the data payload back into an integer.
- fix print formating.
Discussed with: lwhsu, kp (taking it off his todo :)
MFC after: 2 weeks
The change to conform to RFC 8200 for overlapping fragments now frees
the entire reassembly queue if the overlapping fragments are not an
exact match.
As a result we do see one less packet in the timeout statistics from
expiry. No other statistics change as the event is not counted.
It can be argued that we should improve the statistics counters in
that case.
This test case update should have been committed alongside the original
commit.
Pointyhat to: bz
MFC after: 3 weeks
X-MFC with: r354046
Sponsored by: Netflix
When we receive the packet with the first fragmented part (fragoff=0)
we remember the length of the unfragmentable part and the next header
(and should probably also remember ECN) as meta-data on the reassembly
queue.
Someone replying this packet so far could change these 2 (3) values.
While changing the next header seems more severe, for a full size
fragmented UDP packet, for example, adding an extension header to the
unfragmentable part would go unnoticed (as the framented part would be
considered an exact duplicate) but make reassembly fail.
So do not allow updating the meta-data after we have seen the first
fragmented part anymore.
The frag6_20 test case is added which failed before triggering an
ICMPv6 "param prob" due to the check for each queued fragment for
a max-size violation if a fragoff=0 packet was received.
MFC after: 3 weeks
Sponsored by: Netflix
When done with tests check that both the per-VNET and the global-fragmented-
packets-in-system counters are zero to make sure we do not leak counters or
queue entries.
This implies that for all test cases we either have to check for the ICMPv6
packet sent in case of TLL=0 expiry (if it is sent) or sleep at least long
enough for the TTL to expire for all packets (e.g., fragments where we do not
have the off=0 packet).
This also means that statistics are now updated to include all the expired
packets.
There are cases when we do not check for counters to be zero and this is
when testing VNET teardown to behave properly and not panic, when we are
intentionally leaving fragments in the system.
MFC after: 3 weeks
Sponsored by: Netflix
In order to ensure that changing the frag6 code does not change behaviour
or break code a set of test cases were implemented.
Like some other test cases these use Scapy to generate packets and possibly
wait for expected answers. In most cases we do check the global and
per interface (netstat) statistics output using the libxo output and grep
to validate fields and numbers. This is a bit hackish but we currently have
no better way to match a selected number of stats only (we have to ignore
some of the ND6 variables; otherwise we could use the entire list).
Test cases include atomic fragments, single fragments, multi-fragments,
and try to cover most error cases in the code currently.
In addition vnet teardown is tested to not panic.
A separate set (not in-tree currently) of probes were used in order to
make sure that the test cases actually test what they should.
The "sniffer" code was copied and adjusted from the netpfil version
as we sometimes will not get packets or have longer timeouts to deal with.
Sponsored by: Netflix
Set up two jails connected by an epair. Create VLAN interfaces in both
jails and check connectivity.
This is a very basic test, but exposed panics during the network stack
epoch work, so this is worth testing.
* Don't partition a disk if too few are available. Just rely on Kyua to
ensure that the tests aren't run with insufficient disks.
* Remove redundant cleanup steps
* In zpool_add_003_pos, store the temporary file in $PWD so Kyua will
automatically clean it up.
* Update zpool_add_005_pos to use dumpon instead of dumpadm. This test had
never been ported to FreeBSD.
* In zpool_add_005_pos, don't format the dump disk with UFS. That was
pointless.
MFC after: 2 weeks
Sponsored by: Axcient
The test is necessarily racy, because it depends on being able to complete a
"zpool add" before a previous resilver finishes. But it was racier than it
needed to be. Move the first "zpool add" to before the resilver starts.
MFC after: 2 weeks
Sponsored by: Axcient
The ZFS test suite was overriding the common $PWD variable with the path to
the pwd command, even though no test wanted to use it that way. Most tests
didn't notice, because ksh93 eventually restored it to its proper meaning.
MFC after: 2 weeks
Sponsored by: Axcient
* Don't create a UFS mountpoint just to store some temporary files. The
tests should always be executed with a sufficiently large TMPDIR.
Creating the UFS mountpoint is not only unneccessary, but it slowed
zpool_import_missing_002_pos greatly, because that test moves large files
between TMPDIR and the UFS mountpoint. This change also allows many of
the tests to be executed with just a single test disk, instead of two.
* Move zpool_import_missing_002_pos's backup device dir from / to $PWD to
prevent cross-device moves. On my system, these two changes improved that
test's speed by 39x. It should also prevent ENOSPC errors seen in CI.
* If insufficient disks are available, don't try to partition one of them.
Just rely on Kyua to skip the test. Users who care will configure Kyua
with sufficient disks.
MFC after: 2 weeks
Sponsored by: Axcient
It was trying to destroy the pool while zfsd was detaching the spare, and
"zpool destroy" failed. Fix by waiting until the spare has fully detached.
MFC after: 2 weeks
Sponsored by: Axcient
The test declared that it only needed 5 disks, but actually tried to use 6.
Fix it to use just 5, which is all it really needs.
MFC after: 2 weeks
Sponsored by: Axcient
ATF functions such as ATF_REQUIRE do not work correctly in child processes.
Use plain C functions to report errors instead.
In the parent, check for the untimely demise of children. Without this,
the test hung until the framework's timeout.
Raise the resource limit on the number of open files. If this was too low,
the test hit the two problems above.
Restore the kern.maxfiles sysctl OID in the cleanup function.
The body prematurely removed the symlink in which the old value was saved.
Make the test more robust by opening more files. In fact, due to the
integer division by 4, this was necessary to make the test valid with
some initial values of maxfiles. Thanks, asomers@.
wait() for children instead of sleeping.
Clean up a temporary file created by the test ("afile").
Reviewed by: asomers
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21900
* Fix force_sync_path, which ensures that a file is fully flushed to disk.
Apparently "zpool history"'s performance has improved, but exporting and
importing the pool still works.
* Fix file_dva by using undocumented zdb syntax to clarify that we're
interested in the pool's root file system, not the pool itself. This
should also fix the zpool_clear_001_pos test.
* Remove a redundant cleanup step
MFC after: 2 weeks
Sponsored by: Axcient
Differential Revision: https://reviews.freebsd.org/D21901
These tests have never worked correctly
* Replace runwattr with sudo
* Fix a scoping bug with the "dtst" variable
* Cleanup user properties created during tests
* Eliminate the checks for refreservation and send support. They will always
be supported.
* Fix verify_fs_snapshot. It seemed to assume that permissions would not yet
be delegated, but that's not how it's actually used.
* Combine verify_fs_promote with verify_vol_promote
* Remove some useless sleeps
* Fix backwards condition in verify_vol_volsize
* Remove some redundant cleanup steps in the tests. cleanup.ksh will handle
everything.
* Disable some parts of the tests that FreeBSD doesn't support:
* Creating snapshots with mkdir
* devices
* shareisci
* sharenfs
* xattr
* zoned
The sharenfs parts could probably be reenabled with more work to remove the
Solarisms.
MFC after: 2 weeks
Sponsored by: Axcient
Differential Revision: https://reviews.freebsd.org/D21898
ZFS has grown some additional properties that hadn't been added to the
config file yet. While I'm here, improve the error message, and remove a
superfluous command.
MFC after: 2 weeks
Sponsored by: Axcient
This test attempts to corrupt a file-backed vdev by deleting it and then
recreating it with truncate. But that doesn't work, because the pool
already has the vdev open, and it happily hangs on to the open-but-deleted
file. Fix by truncating the file without deleting it.
MFC after: 2 weeks
Sponsored by: Axcient
* Adapt zvol_misc_001_neg to use dumpon instead of Solaris's dumpadm
* Disable zvol_misc_003_neg, zvol_misc_005_neg, and zvol_misc_006_pos,
because they involve using a zvol as a dump device, which FreeBSD does not
yet support.
MFC after: 2 weeks
Sponsored by: Axcient
* Remove zpool_create_013_neg. FreeBSD doesn't have an equivalent of
Solaris's metadevices. GEOM would be the equivalent, but since all geoms
are the same from ZFS's perspective, this test would be redundant with
zpool_create_012_neg
* Remove zpool_create_014_neg. FreeBSD does not support swapping to regular
files.
* Remove zpool_create_016_pos. This test is redundant with literally every
other test that creates a disk-backed pool.
* s:/etc/vfstab:/etc/fstab in zpool_create_011_neg
* Delete the VTOC-related portion of zpool_create_008_pos. FreeBSD doesn't
use VTOC.
* Replace dumpadm with dumpon and swap with swapon in multiple tests.
* In zpool_create_015_neg, don't require "zpool create -n" to fail. It's
reasonable for that variant to succeed, because it doesn't actually open
the zvol.
* Greatly simplify zpool_create_012_neg. Make it safer, too, but not
interfering with the system's regular swap devices.
* Expect zpool_create_011_neg to fail (PR 241070)
* Delete some redundant cleanup steps in various tests
* Remove some unneeeded ATF timeout specifications. The default is fine.
PR: 241070
MFC after: 2 weeks
Sponsored by: Axcient
kern_shm_open2(), since conception, completely fails to pass the mode along
to kern_shm_open(). This breaks most uses of it.
Add tests alongside this that actually check the mode of the returned
files.
PR: 240934 [pulseaudio breakage]
Reported by: ler, Andrew Gierth [postgres breakage]
Diagnosed by: Andrew Gierth (great catch)
Tested by: ler, tmunro
Pointy hat to: kevans
Add an atomic shm rename operation, similar in spirit to a file
rename. Atomically unlink an shm from a source path and link it to a
destination path. If an existing shm is linked at the destination
path, unlink it as part of the same atomic operation. The caller needs
the same permissions as shm_unlink to the shm being renamed, and the
same permissions for the shm at the destination which is being
unlinked, if it exists. If those fail, EACCES is returned, as with the
other shm_* syscalls.
truss support is included; audit support will come later.
This commit includes only the implementation; the sysent-generated
bits will come in a follow-on commit.
Submitted by: Matthew Bryan <matthew.bryan@isilon.com>
Reviewed by: jilles (earlier revision)
Reviewed by: brueffer (manpages, earlier revision)
Relnotes: yes
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21423
memfd_create is effectively a SHM_ANON shm_open(2) mapping with optional
CLOEXEC and file sealing support. This is used by some mesa parts, some
linux libs, and qemu can also take advantage of it and uses the sealing to
prevent resizing the region.
This reimplements shm_open in terms of shm_open2(2) at the same time.
shm_open(2) will be moved to COMPAT12 shortly.
Reviewed by: markj, kib
Differential Revision: https://reviews.freebsd.org/D21393
It is useful to have some tests for page fault signals.
More tests would be useful but creating the conditions (such as various
kinds of running out of memory and I/O errors) is more complicated.
The tests page_fault_signal__bus_objerr_1 and
page_fault_signal__bus_objerr_2 depend on https://reviews.freebsd.org/D21566
before they can pass.
PR: 211924
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D21624
Coverity complained that I wasn't initializing some class members until the
SetUp method. Do it in the constructor instead.
Reported by: Coverity
Coverity CIDs: 1404352, 1404378
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Where open(2) is expected to fail, the tests should assert or expect that
its return value is -1. These tests all accepted too much but happened to
pass anyway.
Reported by: Coverity
Coverity CID: 1404512, 1404378, 1404504, 1404483
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
to the traditional tree(3) RB trees, but using an array (preallocated,
linear chunk of memory) to store the tree.
This avoids allocation overhead, improves memory locality,
and makes it trivially easy to share/transfer/copy the entire tree
without the need for marshalling. The downside is that the size
is fixed at initialization time; there is no mechanism to resize
it.
This is one of the dependencies for the new stats(3) framework
(https://reviews.freebsd.org/D20477).
Reviewed by: bcr (man pages), markj
Discussed with: cem
MFC after: 2 weeks
Sponsored by: Klara Inc, Netflix
Obtained from: Netflix
Differential Revision: https://reviews.freebsd.org/D20324
When communicating with a FUSE server that implements version 7.8 (or older)
of the FUSE protocol, the FUSE_WRITE request structure is 16 bytes shorter
than normal. The protocol version check wasn't applied universally, leading
to an extra 16 bytes being sent to such servers. The extra bytes were
allocated and bzero()d, so there was no information disclosure.
Reviewed by: emaste
MFC after: 3 days
MFC-With: r350665
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21557
The fusefs tests deliberately leak file descriptors. To do otherwise would
add extra complications to the tests' mock FUSE server. This annotation
should hopefully convince Coverity to shut up about the leaks.
Reviewed by: uqs
MFC after: 4 days
Sponsored by: The FreeBSD Foundation
Address the following defects reported by Coverity:
* Structurally dead code (CID 1404366): set m_quit before FAIL, not after
* Unchecked return value of sysctlbyname (CID 1404321)
* Unchecked return value of stat(2) (CID 1404471)
* Unchecked return value of open(2) (CID 1404402, 1404529)
* Unchecked return value of dup(2) (CID 1404478)
* Buffer overflows. These are all false positives caused by the fact that
Coverity thinks I'm using a buffer to store strings, when in fact I'm
really just using it to store a byte array that happens to be initialized
with a string. I'm changing the type from char to uint8_t in the hopes
that it will placate Coverity. (CID 1404338, 1404350, 1404367, 1404376,
1404379, 1404381, 1404388, 1404403, 1404425, 1404433, 1404434, 1404474,
1404480, 1404484, 1404503, 1404505)
* False positive file descriptor leak. I'm going to try to fix this with
Coverity modeling, but I'll also change an EXPECT to ASSERT so we don't
perform meaningless assertions after the failure. (CID 1404320, 1404324,
1404440, 1404445).
* Unannotated file descriptor leak. This will be followed up by a Coverity
modeling change. (CID 1404326, 1404334, 1404336, 1404357, 1404361,
1404372, 1404391, 1404395, 1404409, 1404430, 1404448, 1404451, 1404455,
1404457, 1404458, 1404460)
* Uninitialized variables in C++ constructors (CID 1404327, 1404346). In the
case of m_maxphys, this actually led to part of the FUSE_INIT's response
being set to stack garbage during the WriteCluster::clustering test.
* Uninitialized sun_len field in struct sockaddr_un (CID 1404330, 1404371,
1404429).
Reported by: Coverity
Reviewed by: emaste
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21457
r339782 re-enabled acl test 00 and 02, which were disabled in r336617
due to PR 229930.
When the tests were disabled the code to set their required programs was
disabled as well, but this was not reinstated when r339782 re-enabled
them.
Do so now.
Sponsored by: Axiado
* A small error in r338152 let to the returned size always being exactly
eight bytes too large.
* The FUSE_LISTXATTR operation works like Linux's listxattr(2): if the
caller does not provide enough space, then the server should return ERANGE
rather than return a truncated list. That's true even though in FUSE's
case the kernel doesn't provide space to the client at all; it simply
requests a maximum size for the list. We previously weren't handling the
case where the server returns ERANGE even though the kernel requested as
much size as the server had told us it needs; that can happen due to a
race.
* We also need to ensure that a pathological server that always returns
ERANGE no matter what size we request in FUSE_LISTXATTR won't cause an
infinite loop in the kernel. As of this commit, it will instead cause an
infinite loop that exits and enters the kernel on each iteration, allowing
signals to be processed.
Reviewed by: cem
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21287
This makes it possible to perform mathematical operations on
fractional values without using floating point. It operates on Q
numbers, which are integer-sized, opaque structures initialized
to hold a chosen number of integer and fractional bits.
For a general description of the Q number system, see the "Fixed Point
Representation & Fractional Math" whitepaper[1]; for the actual
API see the qmath(3) man page.
This is one of dependencies for the upcoming stats(3) framework[2]
that will be applied to the TCP stack in a later commit.
1. https://www.superkits.net/whitepapers/Fixed%20Point%20Representation%20&%20Fractional%20Math.pdf
2. https://reviews.freebsd.org/D20477
Reviewed by: bcr (man pages, earlier version), sef (earlier version)
Discussed with: cem, dteske, imp, lstewart
Sponsored By: Klara Inc, Netflix
Obtained from: Netflix
Differential Revision: https://reviews.freebsd.org/D20116
Motivated by the fact that I'm messing around near the implementation and
wanting to ensure this doesn't get messed up in the process.
MFC after: 1 week
Failure test cases:
sys.netpfil.common.pass_block.pf_v6
sys.netpfil.pf.pass_block.noalias
sys.netpfil.pf.pass_block.v6
Sponsored by: The FreeBSD Foundation
machine/regnum.h ends up being included by sys/procfs.h and sys/ptrace.h via
machine/reg.h. Many of the regnum definitions are too short and too generic
to be exposing to any userland application including one of these two
headers. Moreover, these actively cause build failures in googletest
(template <typename T1 ...> expanding to template <typename 9 ...>).
Hide the definitions behind _KERNEL or _WANT_MIPS_REGNUM, and patch all of
the userland consumers to define as needed.
Discussed with: imp, jhb
Reviewed by: imp, jhb
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21330
Attempting to build the fusefs tests WITHOUT_GOOGLETEST will result in an
error if the host system or sysroot doesn't already have googletest headers
in /usr/include/private (e.g. host built/installed WITHOUT_GOOGLETEST, clean
cross-buildworld WITHOUT_GOOGLETEST).
Reviewed by: asomers
Differential Revision: https://reviews.freebsd.org/D21367
Add test for checking that the packets are dropped if it is fragmented into
more than the defined value.
Submitted by: Ahsan Barkati
Reviewed by: kp
Sponsored by: Google, Inc. (GSoC 2019)
Differential Revision: https://reviews.freebsd.org/D21307
This test tests the following:
- The firewall is able to set the tos bits
- The firewall is able to set the DSCP bits when EN bits is already set and
the EN bits remains unchanged.
- The firewall is able to drop the packets based on ToS value
Submitted by: Ahsan Barkati
Reviewed by: kp
Sponsored by: Google, Inc. (GSoC 2019)
Differential Revision: https://reviews.freebsd.org/D21305
The pft_ping.py and sniffer.py tool is moved from tests/sys/netpfil/pf to
tests/sys/netpfil/common directory because these tools are to be used in
common for all the firewalls.
Submitted by: Ahsan Barkati
Reviewed by: kp, thj
Sponsored by: Google, Inc. (GSoC 2019)
Differential Revision: https://reviews.freebsd.org/D21276
Inform D that C executed procctl(PROC_PDEATHSIG_CTL). Otherwise D
might allow B to exit before C is set up to receive a signal on the
parent exit. In this case, C waits forever for the signal and test
hangs.
PR: 237657
Reported and tested by: lwhsu
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
ptrace(PT_DETACH) requires stopped debuggee, otherwise it fails. When
the call fails, the C process is left as debuggee of the process D,
and might be killed too early if process D exits occurs fast enough.
Since pipes are not closed in the forked children, this resulted in
the test hanging, since no write occured from C to wake A.
PR: 237657
Reported and tested by: lwhsu
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The FUSE_LISTXATTR operation always returns the full list of a file's
extended attributes, in all namespaces. There's no way to filter the list
server-side. However, currently FreeBSD's fusefs driver sends a namespace
string with the FUSE_LISTXATTR request. That behavior was probably copied
from fuse_vnop_getextattr, which has an attribute name argument. It's
been there ever since extended attribute support was added in r324620. This
commit removes it.
Reviewed by: cem
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21280
Some files got their contented duplicated in r345409. Some mistakes where
fixed in r345430. The only file that was left with a duplicated content was
CVE-2019-5598.py.
Reviewed by: kp
Approved by: src (kp)
Differential Revision: https://reviews.freebsd.org/D21267
The entirety of r351061 was a copy/paste error. I'm sorry I've been
comitting so hastily.
Reported by: rpokala
Reviewed by: rpokala
MFC after: 2 weeks
MFC-With: 351061
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21265
In FUSE protocol 7.9, the size of the FUSE_GETATTR request has increased.
However, the fusefs driver is currently not sending the additional fields.
In our implementation, the additional fields are always zero, so I there
haven't been any test failures until now. But fusefs-lkl requires the
request's length to be correct.
Fix this bug, and also enhance the test suite to catch similar bugs.
PR: 239830
MFC after: 2 weeks
MFC-With: 350665
Sponsored by: The FreeBSD Foundation
The test needs to expect a FUSE_FORGET operation. Most of the time the test
would pass anyway, because by chance FUSE_FORGET would arrive after the
unmount.
MFC after: 2 weeks
MFC-With: 350665
Sponsored by: The FreeBSD Foundation
This change makes required modifications in runtests to also only require the
aesni module on Intel (i386/amd64) platforms, as it is an Intel specific
module.
MFC after: 1 month
MFC to: ^/stable/12 (support not present on ^/stable/11)
Submitted by: Greg V <greg@unrelenting.technology>
Differential Revision: https://reviews.freebsd.org/D21018
This is a gcc 8.0+ warning which needed to be silenced on for the riscv
build. amd64-xtoolchain-gcc still uses gcc 6.4.0 and does not understand
this flag.
Reviewed by: asomers
Feedback from: imp
Differential Revision: https://reviews.freebsd.org/D21195
This commit imports the new fusefs driver. It raises the protocol level
from 7.8 to 7.23, fixes many bugs, adds a test suite for the driver, and
adds many new features. New features include:
* Optional kernel-side permissions checks (-o default_permissions)
* Implement VOP_MKNOD, VOP_BMAP, and VOP_ADVLOCK
* Allow interrupting FUSE operations
* Support named pipes and unix-domain sockets in fusefs file systems
* Forward UTIME_NOW during utimensat(2) to the daemon
* kqueue support for /dev/fuse
* Allow updating mounts with "mount -u"
* Allow exporting fusefs file systems over NFS
* Server-initiated invalidation of the name cache or data cache
* Respect RLIMIT_FSIZE
* Try to support servers as old as protocol 7.4
Performance enhancements include:
* Implement FUSE's FOPEN_KEEP_CACHE and FUSE_ASYNC_READ flags
* Cache file attributes
* Cache lookup entries, both positive and negative
* Server-selectable cache modes: writethrough, writeback, or uncached
* Write clustering
* Readahead
* Use counter(9) for statistical reporting
PR: 199934 216391 233783 234581 235773 235774 235775
PR: 236226 236231 236236 236291 236329 236381 236405
PR: 236327 236466 236472 236473 236474 236530 236557
PR: 236560 236844 237052 237181 237588 238565
Reviewed by: bcr (man pages)
Reviewed by: cem, ngie, rpokala, glebius, kib, bde, emaste (post-commit
review on project branch)
MFC after: 3 weeks
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Pull Request: https://reviews.freebsd.org/D21110
The process is reparented to the debugger while it is attached.
B B
/ ----> |
A A D
Every time when the process is reparented, it is added to the orphan list
of the previous parent:
A->orphan = B
D->orphan = NULL
When the A process will close the process descriptor to the B process,
the B process will be reparented to the init process.
B B - init
| ---->
A D A D
A->orphan = B
D->orphan = B
In this scenario, the B process is in the orphan list of A and D.
When the last process descriptor is closed instead of reparenting
it to the reaper let it stay with the debugger process and set
our previews parent to the reaper.
Add test case for this situation.
Notice that without this patch the kernel will crash with this test case:
panic: orphan 0xfffff8000e990530 of 0xfffff8000e990000 has unexpected oppid 1
Reviewed by: markj, kib
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D20361
Add a common test suite for the firewalls included in the base system. The test
suite allows common test infrastructure to test pf, ipfw and ipf firewalls from
test files containing the setup for all three firewalls.
Add the pass block test for pf, ipfw and ipf. The pass block test checks the
allow/deny functionality of the firewalls tested.
Submitted by: Ahsan Barkati
Sponsored by: Google, Inc. (GSoC 2019)
Reviewed by: kp
Approved by: bz (co-mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D21065
When a fusefs file system is mounted using the writeback cache, the cache
may still be bypassed by opening a file with O_DIRECT. When writing with
O_DIRECT, the cache must be invalidated for the affected portion of the
file. Fix some panics caused by inadvertently invalidating too much.
Sponsored by: The FreeBSD Foundation
FUSE file systems can optionally support interrupting outstanding
operations. However, the file system does not identify to the kernel at
mount time whether it's capable of doing that. Instead it signals its
noncapability by returning ENOSYS to the first FUSE_INTERRUPT operation it
receives. That's a problem for reliable signal delivery, because the kernel
must choose which thread should get a signal before it knows whether the
FUSE server can handle interrupts. The problem is even worse because the
FUSE protocol allows a file system to simply ignore all FUSE_INTERRUPT
operations.
Fix the signal delivery logic by making interruptibility an opt-in mount
option. This will require a corresponding change to libfuse, but not to
most file systems that link to libfuse.
Bump __FreeBSD_version due to the new mount option.
Sponsored by: The FreeBSD Foundation
1) Don't explicitly not mask SIGKILL. kern_sigprocmask won't allow it to be
masked, anyway.
2) Fix an infinite loop bug. If a process received both a maskable signal
lower than 9 (like SIGINT) and then received SIGKILL,
fticket_wait_answer would spin. msleep would immediately return EINTR,
but cursig would return SIGINT, so the sleep would get retried. Fix it
by explicitly checking whether SIGKILL has been received.
3) Abandon the sig_isfatal optimization introduced by r346357. That
optimization would cause fticket_wait_answer to return immediately,
without waiting for a response from the server, if the process were going
to exit anyway. However, it's vulnerable to a race:
1) fatal signal is received while fticket_wait_answer is sleeping.
2) fticket_wait_answer sends the FUSE_INTERRUPT operation.
3) fticket_wait_answer determines that the signal was fatal and returns
without waiting for a response.
4) Another thread changes the signal to non-fatal.
5) The first thread returns to userspace. Instead of exiting, the
process continues.
6) The application receives EINTR, wrongly believes that the operation
was successfully interrupted, and restarts it. This could cause
problems for non-idempotent operations like FUSE_RENAME.
Reported by: kib (the race part)
Sponsored by: The FreeBSD Foundation
This ptrace operation returns a structure containing the error and
return values from the current system call. It is only valid when a
thread is stopped during a system call exit (PL_FLAG_SCX is set).
The sr_error member holds the error value from the system call. Note
that this error value is the native FreeBSD error value that has _not_
been translated to an ABI-specific error value similar to the values
logged to ktrace.
If sr_error is zero, then the return values of the system call will be
set in sr_retval[0] and sr_retval[1].
Reviewed by: kib
MFC after: 1 month
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D20901
* Fix the kernel build with gcc by removing a redundant extern declaration
* In the tests, fix a printf format specifier that assumed LP64
Sponsored by: The FreeBSD Foundation
Previously fusefs would never recycle vnodes. After VOP_INACTIVE, they'd
linger around until unmount or the vnlru reclaimed them. This commit
essentially actives and inlines the old reclaim_revoked sysctl, and fixes
some issues dealing with the attribute cache and multiply linked files.
Sponsored by: The FreeBSD Foundation
closing a file descriptor causes FUSE activity that is superfluous to the
purpose of most tests, but would nonetheless require matching expectations.
Rather than do that, most tests deliberately leak file descriptors instead.
This commit moves the leakage from each test into two trivial functions:
leak and leakdir. Hopefully Coverity will only complain about those
functions and not all of their callers.
Sponsored by: The FreeBSD Foundation
Now the io tests are run in all cache modes. The fusefs test suite can now
get adequate coverage without changing the value of
vfs.fusefs.data_cache_mode, which is only needed for legacy file systems
now.
Sponsored by: The FreeBSD Foundation
As of protocol 7.23, fuse file systems can specify their cache behavior on a
per-mountpoint basis. If they set FUSE_WRITEBACK_CACHE in
fuse_init_out.flags, then they'll get the writeback cache. If not, then
they'll get the writethrough cache. If they set FOPEN_DIRECT_IO in every
FUSE_OPEN response, then they'll get no cache at all.
The old vfs.fusefs.data_cache_mode sysctl is ignored for servers that use
protocol 7.23 or later. However, it's retained for older servers,
especially for those running in jails that lack access to the new protocol.
This commit also fixes two other minor test bugs:
* WriteCluster:SetUp was using an uninitialized variable.
* Read.direct_io_pread wasn't verifying that the cache was actually
bypassed.
Sponsored by: The FreeBSD Foundation
If a server supports a timestamp granularity other than 1ns, it can tell the
client this as of protocol 7.23. The client will use that granularity when
updating its cached timestamps during write. This way the timestamps won't
appear to change following flush.
Sponsored by: The FreeBSD Foundation
I originally thought that the kernel would be responsible for ctime in
protocol 7.23. But now I realize that's not the case. The server is
responsible for ctime. The kernel only sets it when there are dirty writes
cached, because that's when the server can't.
Sponsored by: The FreeBSD Foundation
As of r349396 the kernel will internally update the mtime and ctime of files
on write. It will also flush the mtime should a SETATTR happen before the
data cache gets flushed. Now it will flush the ctime too, if the server is
using protocol 7.23 or higher.
This is the only case in which the kernel will explicitly set a file's
ctime, since neither utimensat(2) nor any other user interfaces allow it.
Sponsored by: The FreeBSD Foundation
Writing should implicitly update a file's mtime and ctime. For fuse, the
server is supposed to do that. But the client needs to do it too, because
the FUSE_WRITE response does not include time attributes, and it's not
desirable to issue a GETATTR after every WRITE. When using the writeback
cache, there's another hitch: the kernel should ignore the mtime and ctime
fields in any GETATTR response for files with a dirty write cache.
Sponsored by: The FreeBSD Foundation
Writes that extend a file should update the file's size. r344185 restricted
that behavior for fusefs to only happen when the data cache was enabled.
That probably made sense at the time because the attribute cache wasn't
fully baked yet. Now that it is, we should always update the cached file
size during write.
Sponsored by: The FreeBSD Foundation
Use the standard facilities for getpages and putpages instead of bespoke
implementations that don't work well with the writeback cache. This has
several corollaries:
* Change the way we handle short reads _again_. vfs_bio_getpages doesn't
provide any way to handle unexpected short reads. Plus, I found some more
lock-order problems. So now when the short read is detected we'll just
clear the vnode's attribute cache, forcing the file size to be requeried
the next time it's needed. VOP_GETPAGES doesn't have any way to indicate
a short read to the "caller", so we just bzero the rest of the page
whenever a short read happens.
* Change the way we decide when to set the FUSE_WRITE_CACHE bit. We now set
it for clustered writes even when the writeback cache is not in use.
Sponsored by: The FreeBSD Foundation
* During TearDown, close the test file before the backing file. That way
the backing file artifact will have the correct contents after the test
completes. It doesn't matter when running in Kyua, but it may when
running the test manually.
* Add a closeopen operation that mimics what FSX does with the "-c" option.
* Skip mmap-related tests when vfs.fusefs.data_cache_mode == 0
Sponsored by: The FreeBSD Foundation
VOP_GETPAGES intentionally tries to read beyond EOF, so fuse_read_biobackend
can't rely on bp->b_resid > 0 indicating a short read. And adjusting
bp->b_count after a short read seems to cause some sort of resource leak.
Instead, store the shortfall in the bp->b_fsprivate1 field.
Sponsored by: The FreeBSD Foundation
A fuse server may return a short read for three reasons:
* The file is opened with FOPEN_DIRECT_IO. In this case, the short read
should be returned directly to userland. We already handled this case
correctly.
* The file was truncated server-side, and the read hit EOF. In this case,
the kernel should update the file size. Fixed in the case of VOP_READ.
Fixing this for VOP_GETPAGES is TODO.
* The file is opened in writeback mode, there are dirty buffers past what
the server thinks is the file's EOF, and the read hit what the server
thinks is the file's EOF. In this case, the client is trying to read a
hole, and should zero-fill it. We already handled this case, and I added
a test for it.
Sponsored by: The FreeBSD Foundation
None of the new features are implemented yet. This commit just adds the new
protocol definitions and adds backwards-compatibility code for pre 7.23
servers.
Sponsored by: The FreeBSD Foundation
r349260 removed some Linuxisms from the FUSE protocol header file in favor
of standard C99 types. This change follows suit in the tests.
Sponsored by: The FreeBSD Foundation
This protocol level adds two new features: the ability for the server to
store or retrieve data into/from the client's cache. But the messages
aren't defined soundly since they identify the file only by its inode,
without the generation number. So it's possible for them to modify the
wrong file's cache. Also, I don't know of any file systems in ports that
use these messages. So I'm not implementing them. I did add a (disabled)
test for the store message, however.
Sponsored by: The FreeBSD Foundation
If the fuse daemon supports FUSE_BMAP, then use that for the block mapping.
Otherwise, use the same technique used by vop_stdbmap. Report large values
for runp and runb in order to maximize read clustering and minimize upcalls,
even if we don't know the true layout.
The major result of this change is that sequential reads to FUSE files will
now usually happen 128KB at a time instead of 64KB.
Sponsored by: The FreeBSD Foundation
* Don't always write the last page synchronously. That's not actually
required. It was probably just masking another bug that I fixed later,
possibly in r349021.
* Enable the NotifyWriteback tests now that Writeback cache is working.
* Add a test to ensure that the write cache isn't flushed synchronously when
in writeback mode.
Sponsored by: The FreeBSD Foundation
fusefs will now use cluster_read. This allows readahead of more than one
cache block. However, it won't yet actually cluster the reads because that
requires VOP_BMAP, which fusefs does not yet implement.
Sponsored by: The FreeBSD Foundation
Add experimental feature to increase concurrency in Fortuna. As this
diverges slightly from canonical Fortuna, and due to the security
sensitivity of random(4), it is off by default. To enable it, set the
tunable kern.random.fortuna.concurrent_read="1". The rest of this commit
message describes the behavior when enabled.
Readers continue to update shared Fortuna state under global mutex, as they
do in the status quo implementation of the algorithm, but shift the actual
PRF generation out from under the global lock. This massively reduces the
CPU time readers spend holding the global lock, allowing for increased
concurrency on SMP systems and less bullying of the harvestq kthread.
It is somewhat of a deviation from FS&K. I think the primary difference is
that the specific sequence of AES keys will differ if READ_RANDOM_UIO is
accessed concurrently (as the 2nd thread to take the mutex will no longer
receive a key derived from rekeying the first thread). However, I believe
the goals of rekeying AES are maintained: trivially, we continue to rekey
every 1MB for the statistical property; and each consumer gets a
forward-secret, independent AES key for their PRF.
Since Chacha doesn't need to rekey for sequences of any length, this change
makes no difference to the sequence of Chacha keys and PRF generated when
Chacha is used in place of AES.
On a GENERIC 4-thread VM (so, INVARIANTS/WITNESS, numbers not necessarily
representative), 3x concurrent AES performance jumped from ~55 MiB/s per
thread to ~197 MB/s per thread. Concurrent Chacha20 at 3 threads went from
roughly ~113 MB/s per thread to ~430 MB/s per thread.
Prior to this change, the system was extremely unresponsive with 3-4
concurrent random readers; each thread had high variance in latency and
throughput, depending on who got lucky and won the lock. "rand_harvestq"
thread CPU use was high (double digits), seemingly due to spinning on the
global lock.
After the change, concurrent random readers and the system in general are
much more responsive, and rand_harvestq CPU use dropped to basically zero.
Tests are added to the devrandom suite to ensure the uint128_add64 primitive
utilized by unlocked read functions to specification.
Reviewed by: markm
Approved by: secteam(delphij)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D20313
rename the source to gsb_crc32.c.
This is a prerequisite of unifying kernel zlib instances.
PR: 229763
Submitted by: Yoshihiro Ota <ota at j.email.ne.jp>
Differential Revision: https://reviews.freebsd.org/D20193
