Commit Graph

45 Commits

Author SHA1 Message Date
Enji Cooper
193d9e768b sys/modules: normalize .CURDIR-relative paths to SRCTOP
This simplifies make output/logic

Tested with:	`cd sys/modules; make ALL_MODULES=` on amd64
MFC after:	1 month
Sponsored by:	Dell EMC Isilon
2017-03-04 10:10:17 +00:00
Oleksandr Tymoshenko
b011f8c450 Merging of projects/armv6, part 5
- Driver for SMSC LAN95XX and LAN8710A ethernet controllers
- Driver for LAN8710A PHY

Submitted by:	Ben Gray, Damjan Marion, Tim Kientzle
2012-08-15 04:03:55 +00:00
Pyun YongHyeon
41e556b9d1 Connect smcphy(4) to mii module build. 2012-02-23 01:22:40 +00:00
Marius Strobl
8c1093fc50 - Import the common MII bitbang'ing code from NetBSD and convert drivers to
take advantage of it instead of duplicating it. This reduces the size of
  the i386 GENERIC kernel by about 4k. The only potential in-tree user left
  unconverted is xe(4), which generally should be changed to use miibus(4)
  instead of implementing PHY handling on its own, as otherwise it makes not
  much sense to add a dependency on miibus(4)/mii_bitbang(4) to xe(4) just
  for the MII bitbang'ing code. The common MII bitbang'ing code also is
  useful in the embedded space for using GPIO pins to implement MII access.
- Based on lessons learnt with dc(4) (see r185750), add bus barriers to the
  MII bitbang read and write functions of the other drivers converted in
  order to ensure the intended ordering. Given that register access via an
  index register as well as register bank/window switching is subject to the
  same problem, also add bus barriers to the respective functions of smc(4),
  tl(4) and xl(4).
- Sprinkle some const.

Thanks to the following testers:
Andrew Bliznak (nge(4)), nwhitehorn@ (bm(4)), yongari@ (sis(4) and ste(4))
Thanks to Hans-Joerg Sirtl for supplying hardware to test stge(4).

Reviewed by:	yongari (subset of drivers)
Obtained from:	NetBSD (partially)
2011-11-01 16:13:59 +00:00
Marius Strobl
112a855de7 - Follow the lead of dcphy(4) and pnphy(4) and move the reminder of the PHY
drivers that only ever attach to a particular MAC driver, i.e. inphy(4),
  ruephy(4) and xlphy(4), to the directory where the respective MAC driver
  lives and only compile it into the kernel when the latter is also there,
  also removing it from miibus.ko and moving it into the module of the
  respective MAC driver.
- While at it, rename exphy.c, which comes from NetBSD where the MAC driver
  it corresponds to also is named ex(4) instead of xl(4) but that in FreeBSD
  actually identifies itself as xlphy(4), and its function names accordingly
  for consistency.
- Additionally while at it, fix some minor style issues like whitespace
  in the register headers and add multi-inclusion protection to inphyreg.h.
2011-10-08 12:33:10 +00:00
Marius Strobl
3fcb7a5365 - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP
(reporting IFM_LOOP based on BMCR_LOOP is left in place though as
  it might provide useful for debugging). For most mii(4) drivers it
  was unclear whether the PHYs driven by them actually support
  loopback or not. Moreover, typically loopback mode also needs to
  be activated on the MAC, which none of the Ethernet drivers using
  mii(4) implements. Given that loopback media has no real use (and
  obviously hardly had a chance to actually work) besides for driver
  development (which just loopback mode should be sufficient for
  though, i.e one doesn't necessary need support for loopback media)
  support for it is just dropped as both NetBSD and OpenBSD already
  did quite some time ago.
- Let mii_phy_add_media() also announce the support of IFM_NONE.
- Restructure the PHY entry points to use a structure of entry points
  instead of discrete function pointers, and extend this to include
  a "reset" entry point. Make sure any PHY-specific reset routine is
  always used, and provide one for lxtphy(4) which disables MII
  interrupts (as is done for a few other PHYs we have drivers for).
  This includes changing NIC drivers which previously just called the
  generic mii_phy_reset() to now actually call the PHY-specific reset
  routine, which might be crucial in some cases. While at it, the
  redundant checks in these NIC drivers for mii->mii_instance not being
  zero before calling the reset routines were removed because as soon
  as one PHY driver attaches mii->mii_instance is incremented and we
  hardly can end up in their media change callbacks etc if no PHY driver
  has attached as mii_attach() would have failed in that case and not
  attach a miibus(4) instance.
  Consequently, NIC drivers now no longer should call mii_phy_reset()
  directly, so it was removed from EXPORT_SYMS.
- Add a mii_phy_dev_attach() as a companion helper to mii_phy_dev_probe().
  The purpose of that function is to perform the common steps to attach
  a PHY driver instance and to hook it up to the miibus(4) instance and to
  optionally also handle the probing, addition and initialization of the
  supported media. So all a PHY driver without any special requirements
  has to do in its bus attach method is to call mii_phy_dev_attach()
  along with PHY-specific MIIF_* flags, a pointer to its PHY functions
  and the add_media set to one. All PHY drivers were updated to take
  advantage of mii_phy_dev_attach() as appropriate. Along with these
  changes the capability mask was added to the mii_softc structure so
  PHY drivers taking advantage of mii_phy_dev_attach() but still
  handling media on their own do not need to fiddle with the MII attach
  arguments anyway.
- Keep track of the PHY offset in the mii_softc structure. This is done
  for compatibility with NetBSD/OpenBSD.
- Keep track of the PHY's OUI, model and revision in the mii_softc
  structure. Several PHY drivers require this information also after
  attaching and previously had to wrap their own softc around mii_softc.
  NetBSD/OpenBSD also keep track of the model and revision on their
  mii_softc structure. All PHY drivers were updated to take advantage
  as appropriate.
- Convert the mebers of the MII data structure to unsigned where
  appropriate. This is partly inspired by NetBSD/OpenBSD.
- According to IEEE 802.3-2002 the bits actually have to be reversed
  when mapping an OUI to the MII ID registers. All PHY drivers and
  miidevs where changed as necessary. Actually this now again allows to
  largely share miidevs with NetBSD, which fixed this problem already
  9 years ago. Consequently miidevs was synced as far as possible.
- Add MIIF_NOMANPAUSE and mii_phy_flowstatus() calls to drivers that
  weren't explicitly converted to support flow control before. It's
  unclear whether flow control actually works with these but typically
  it should and their net behavior should be more correct with these
  changes in place than without if the MAC driver sets MIIF_DOPAUSE.

Obtained from:	NetBSD (partially)
Reviewed by:	yongari (earlier version), silence on arch@ and net@
2011-05-03 19:51:29 +00:00
Pyun YongHyeon
e6713fe53c Add RDC Semiconductor R6040 10/100 PHY driver. 2010-12-30 23:50:25 +00:00
Marius Strobl
e60f6da1d6 Now that all previous users of mii_phy_probe() have been converted
in r213893 and r213894 to use mii_attach() instead remove the former
and along with it the "EVIL HACK".

MFC after:	never
2010-10-15 15:46:58 +00:00
Marius Strobl
a55fb8a458 Add a NetBSD-compatible mii_attach(), which is intended to eventually
replace mii_phy_probe() altogether. Compared to the latter the advantages
of mii_attach() are:
- intended to be called multiple times in order to attach PHYs in multiple
  passes (f.e. in order to only use sub-ranges of the 0 to MII_NPHY - 1
  range)
- being able to pass along the capability mask from the NIC to the PHY
  drivers
- being able to specify at which address (phyloc) to probe for a PHY
  (instead of always probing at all addresses from 0 to MII_NPHY - 1)
- being able to specify which PHY instance (offloc) to attach
- being able to pass along MIIF_* flags from the NIC to the PHY drivers
  (f.e. as required to indicated to the PHY drivers that flow control is
  supported by the NIC driver, which actually is the motivation for this
  change).

While at it, I used the opportunity to get rid of some hacks in mii(4)
like miibus_probe() generally doing work besides sheer probing and the
"EVIL HACK" (which will vanish entirely along with mii_phy_probe()) by
passing the struct ifnet pointer via an argument of mii_attach() as well
as to fix some resource leaks in mii(4) in case something fails.
Commits which will update the PHY drivers to honor the MII flags passed
down from the NIC drivers and take advantage of mii_attach() to get rid
of certain types of hacks in NIC and PHY drivers as well as a conversion
of the remaining uses of mii_phy_probe() will follow shortly.

Reviewed by:	jhb, yongari
Obtained from:	NetBSD (partially)
2010-10-14 22:01:40 +00:00
Warner Losh
5fb1afd722 New PHY driver for the internal PHY found in the AX88790. There's a
number of quirks for this device, and this implements just the basics.
The 2.5s powerdown recommended in the datasheet will be next...
2009-03-30 16:01:09 +00:00
Xin LI
4d52a57549 Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit
Ethernet device driver, written by sephe@

Obtained from:	DragonFly
Sponsored by:	iXsystems
MFC after:	2 weeks
2008-06-20 19:28:33 +00:00
Pyun YongHyeon
5defec9f52 Connect jmphy(4) to the build. 2008-05-27 01:23:17 +00:00
Pyun YongHyeon
5618f1be7b Connect atphy(4) to the build. 2008-05-19 01:18:02 +00:00
Marius Strobl
d47d37af9b Add a driver for the National Semiconductor DP83815, DP83843 and
DP83847 PHYs. The main reason for using a specific driver for these
PHYs are reset quirks similar to the nsphy(4) driven DP83840A.

PR:		112654
Obtained from:	NetBSD
MFC after:	2 weeks
Thanks to:	mlaier for testing w/ DP83815
2008-01-27 01:10:41 +00:00
Marius Strobl
a9e28d7d0b Sort values according to style.Makefile(5). 2008-01-27 01:02:29 +00:00
Pyun YongHyeon
a88b5e214f Connect icsphy(4) to the build. 2007-06-11 02:07:08 +00:00
Pyun YongHyeon
3fa3f9a73e Connect gentbi, ip1000phy to the build. 2006-07-25 00:20:11 +00:00
Warner Losh
b77df65876 Don't build dc-only pseudo phy devices with mii.ko anymore 2005-10-18 06:39:30 +00:00
Warner Losh
bf12d88020 ciphy wasn't included here. 2005-09-30 14:54:17 +00:00
Bill Paul
9bac70b851 Add a PHY driver to support the built-in gigE PHY in the 8169S/8110S
ethernet chips. This driver is pretty simple, however it contains
special DSP initialization code which is needed in order to get
the chip to negotiate a gigE link. (This special initialization
may not be needed in subsequent chip revs.) Also:

- Fix typo in if_rlreg.h (RL_GMEDIASTAT_1000MPS -> RL_GMEDIASTAT_1000MBPS)

- Deal with shared interrupts in re_intr(): if interface isn't up,
  return.

- Fix another bug in re_gmii_writereg() (properly apply data field mask)

- Allow PHY driver to read the RL_GMEDIASTAT register via the
  re_gmii_readreg() register (this is register needed to determine
  real time link/media status).
2003-09-11 03:53:46 +00:00
Bill Paul
85a94674d0 tdkphy.c is missing from this module's Makefile. Add it. 2003-07-10 05:12:10 +00:00
Shunsuke Akiyama
11e04b0528 Add RealTek RTL8150 USB to fast Ethernet controller driver.
This driver now supports the Melco LUA-KTX and the GREEN HOUSE
GH-USB100B.

Reviewed by:	imp
MFC after:	2 weeks
2003-05-03 10:16:56 +00:00
David E. O'Brien
2d3ce7133a Remove miidevs.h and generate it from miidevs at compile time.
The devlist2h.awk tool to do this has been repocopied to sys/tools/.
2003-01-19 02:59:34 +00:00
Benno Rice
0c1b03065b Connect bmtphy to the mii module build.
Forgotten a long time ago by:	benno
2002-08-06 06:09:47 +00:00
Mike Smith
07af4a8e64 Export symbols that constitute APIs defined by these
modules.

Note that in the case of 'mii' the API is not clearly
defined, and the symbols exported represent a subset
defined by current usage.
2002-01-11 01:16:00 +00:00
Bill Paul
ce4946daa5 Add support for gigabit ethernet cards based on the NatSemi DP83820
and DP83821 gigabit ethernet MAC chips and the NatSemi DP83861 10/100/1000
copper PHY. There are a whole bunch of very low cost cards available with
this chipset selling for $150USD or less. This includes the SMC9462TX,
D-Link DGE-500T, Asante GigaNIX 1000TA and 1000TPC, and a couple cards
from Addtron.

This chip supports TCP/IP checksum offload, VLAN tagging/insertion.
2048-bit multicast filter, jumbograms and has 8K TX and 32K RX FIFOs.
I have not done serious performance testing with this driver. I know
it works, and I want it under CVS control so I can keep tabs on it.
Note that there's no serious mutex stuff in here yet either: I need
to talk more with jhb to figure out the right way to do this. That
said, I don't think there will be any problems.

This driver should also work on the alpha. It's not turned on in
GENERIC.
2001-05-11 19:56:39 +00:00
Matt Jacob
eab341ffa4 add MARVELL to the list of phys to go into miibus 2001-04-21 23:42:19 +00:00
Jonathan Lemon
da3badcd23 Add Intel 82553, 82555 PHY driver. 2001-03-12 02:45:06 +00:00
Semen Ustimenko
9526a692c6 Add QS6612, AC101 and LXT970 personal drivers and register definitions.
Obtained from:	NetBSD/OpenBSD
2001-02-07 19:57:40 +00:00
David E. O'Brien
c68159a6d8 Use a consistent style and one much closer to the rest of /usr/src 2001-01-06 14:00:42 +00:00
Bill Paul
b54acb744c Add a homePNA PHY driver. This is really only a stub: MII-based homePNA
PHYs tend to look like 10mbps PHYs with no autonegotiation. This allows
us to display the proper media type and link status however.
2000-09-20 17:04:30 +00:00
Peter Wemm
64db83a8ab Use .include <bsd.kmod.mk> to get to ../../*/conf/kmod.mk instead of
encoding the relative path.
2000-05-27 01:14:33 +00:00
Peter Wemm
56ca39961b Pull in sys/conf/kmod.mk, rather than /usr/share/mk/bsd.kmod.mk.
This means that the kernel can be totally self contained now and is not
dependent on the last buildworld to update /usr/share/mk.  This might
also make it easier to build 5.x kernels on 4.0 boxes etc, assuming
gensetdefs and config(8) are updated.
2000-05-04 12:08:52 +00:00
Bill Paul
bd80fa2c7f Reoganize/update the SysKonnect driver:
- Break out the support for the XMAC II's PHY into an miibus driver.

- Reorganize the probe/attach stuff using newbus. Each XMAC is now
  attached to the parent GEnesis controller using newbus. This is
  necessary since each XMAC must also have an attached miibus, and
  the miibus read/write register routines need to be able to get
  at the softc struct for each XMAC, not the one for the parent
  controller. This allows me to get rid of the grotty code I added
  for selecting the unit numbers for the ifnet interfaces: the unit
  numbers are now derived from the newbus-assigned unit numbers,
  which should track with the ifnet interface numbers. I think.
  At the very least, there should never be any collisions.

- Add support for the SK-9821 and SK-9822 1000baseTX adapters. Special
  thanks to SysKonnect for loaning me two adapters for testing.
2000-04-22 02:16:41 +00:00
Bruce Evans
9e4be63dd6 Add ${DEBUG_FLAGS} to CFLAGS in bsd.kmod.mk, not in scattered module
makefiles.  Bad examples in fxp/Makefile keep getting copied to new
makefiles.
2000-01-28 11:26:46 +00:00
Bill Paul
7bfe8450be Add pci_if.h to SRCS so that dcphy will build. 1999-12-05 01:39:11 +00:00
Bill Paul
96f2e892a7 Add the if_dc driver and remove all of the al, ax, dm, pn and mx drivers
which it replaces. The new driver supports all of the chips supported
by the ones it replaces, as well as many DEC/Intel 21143 10/100 cards.

This also completes my quest to convert things to miibus and add
Alpha support.
1999-12-04 17:41:31 +00:00
Bruce Evans
6f940b3847 Removed special rules for building and cleaning device interface files
and empty options files.  The rules are now generated automatically in
bsd.kmod.mk.  Cleaned up related things ($S and ${CLEANFILES}).
1999-11-28 18:53:47 +00:00
Bill Paul
ed8c6514c4 Convert the mx driver to miibus.
In order to make this work, I created a pseudo-PHY driver to deal with
Macronix chips that use the built-in NWAY support and symbol mode port.
This is actually all of them, with the exception of the original MX98713
which presents its NWAY support via the MII serial interface.

The mxphy driver actually manipulates the controller registers directly
rather than using the miibus_readreg()/miibus_writereg() bus interface
since there are no MII registers to read. The mx driver itself pretends
that the NWAY interface is a PHY locayed at MII address 31 for the sole
purpose of allowing the mxphy_probe() routine to know when it needs to
attach to a host controller.
1999-10-16 05:24:13 +00:00
David E. O'Brien
40ec3caac8 Change the name of the installed KLM to contain a leading "if_".
Except for miibus which is now installed as miibus.ko.

Discussed by:	msmith, peter, and wpaul
1999-09-20 06:11:48 +00:00
Bill Paul
bbf7ca2249 Add a driver for the AMD AM79c873 10/100 PHY. By some strange coincidence,
this PHY and the Davicom DM9101 have exactly the same register definitions.
One of them is probably a clone of the other. I'm not sure which.

This is needed for the Davicom DM9102 10/100 PCI ethernet driver which
will be committed shortly.
1999-09-06 05:27:55 +00:00
Bill Paul
a4f02d20ed Add a driver for the internal PHY in the RealTek 8139. 1999-08-31 14:43:30 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Bill Paul
d0dca9afa4 Update these Makefiles; add mlphy and tlphy to the mii module, add
miibus_if.h to tl module's dependencies.
1999-08-27 19:45:19 +00:00
Bill Paul
d00275330d This commit adds support for the NetBSD MII abstraction layer and
MII-compliant PHY drivers. Many 10/100 ethernet NICs available today
either use an MII transceiver or have built-in transceivers that can
be programmed using an MII interface. It makes sense then to separate
this support out into common code instead of duplicating it in all
of the NIC drivers. The mii code also handles all of the media
detection, selection and reporting via the ifmedia interface.

This is basically the same code from NetBSD's /sys/dev/mii, except
it's been adapted to FreeBSD's bus architecture. The advantage to this
is that it automatically allows everything to be turned into a
loadable module. There are some common functions for use in drivers
once an miibus has been attached (mii_mediachg(), mii_pollstat(),
mii_tick()) as well as individual PHY drivers. There is also a
generic driver for all PHYs that aren't handled by a specific driver.
It's possible to do this because all 10/100 PHYs implement the same
general register set in addition to their vendor-specific register
sets, so for the most part you can use one driver for pretty much
any PHY. There are a couple of oddball exceptions though, hence
the need to have specific drivers.

There are two layers: the generic "miibus" layer and the PHY driver
layer. The drivers are child devices of "miibus" and the "miibus" is
a child of a given NIC driver. The "miibus" code and the PHY drivers
can actually be compiled and kldoaded as completely separate modules
or compiled together into one module. For the moment I'm using the
latter approach since the code is relatively small.

Currently there are only three PHY drivers here: the generic driver,
the built-in 3Com XL driver and the NS DP83840 driver. I'll be adding
others later as I convert various NIC drivers to use this code.

I realize that I'm cvs adding this stuff instead of importing it
onto a separate vendor branch, but in my opinion the import approach
doesn't really offer any significant advantage: I'm going to be
maintaining this stuff and writing my own PHY drivers one way or
the other.
1999-08-21 17:40:53 +00:00