There is no need for the 64-bit pmap to have a fixed number of page table
buffers. Since the 64-bit pmap has a DMAP, we can effectively have user
page tables limited only by total RAM size.
EFSCFD (floating point single convert from double) emulation requires saving
the high word of the register, which uses SPE instructions. Enable the SPE
to avoid an SPV Unavailable exception.
MFC after: 1 week
The hold_count and wire_count fields of struct vm_page are separate
reference counters with similar semantics. The remaining essential
differences are that holds are not counted as a reference with respect
to LRU, and holds have an implicit free-on-last unhold semantic whereas
vm_page_unwire() callers must explicitly determine whether to free the
page once the last reference to the page is released.
This change removes the KPIs which directly manipulate hold_count.
Functions such as vm_fault_quick_hold_pages() now return wired pages
instead. Since r328977 the overhead of maintaining LRU for wired pages
is lower, and in many cases vm_fault_quick_hold_pages() callers would
swap holds for wirings on the returned pages anyway, so with this change
we remove a number of page lock acquisitions.
No functional change is intended. __FreeBSD_version is bumped.
Reviewed by: alc, kib
Discussed with: jeff
Discussed with: jhb, np (cxgbe)
Tested by: pho (previous version)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D19247
Actually set the source and destination VA's before using them. Fixes a
bizarre panic on 32-bit Book-E. Not sure why this wasn't caught by the
compiler.
The MSR[EE] bit does not require synchronization when changing. This is a
trivial micro-optimization, removing the trailing isync from mtmsr().
MFC after: 1 week
* Make mmu_booke_sync_icache() use the DMAP on 64-bit prcoesses, no need to
map the page into the user's address space. This removes the
pvh_global_lock from the equation on 64-bit.
* Don't map the page with user-readability on 32-bit. I don't know what the
chance of a given user process being able to access the NULL page when
another process's page is added there, but it doesn't seem like a good
idea to map it to NULL with user read permissions.
* Only sync as much as we need to. There are only two significant places
where pmap_sync_icache is used: proc_rwmem(), and the SIGILL second-chance
for powerpc. The SIGILL second chance is likely the most common, and only
syncs 4 bytes, so avoid the other 127 loop iterations (4096 / 32 byte
cacheline) in __syncicache().
Reduce the surface area of the TLB locks. Unfortunately the same trick for
serializing the tlbie instruction on OEA64 cannot be used here to reduce the
scope of the tlbivax mutex to the tlbsync only, as the mutex also serializes
the TLB miss lock as a side effect, so contention on this lock may not be
reducible any further.
Since the DMAP is only available on powerpc64, and is *always* available on
Book-E powerpc64, don't penalize either side (32-bit or 64-bit) by always
checking hw_direct_map to perform operations. This saves 5-10% time on
various ports builds, and on buildworld+buildkernel on Book-E hardware.
MFC after: 3 weeks
Use the nitems() macro instead of the expansion, a'la r298352. Also, fix the
location of this check to after initializing availmem_regions_sz, so that the
check isn't always against 0, thus always failing (nitems(phys_avail) is always
more than 0).
Unconditional writing to MAS7, which doesn't exist on the e500v1 core, in a
TLB miss handler has been in the code for several years now. Since this has
gone unnoticed for so long, it's easily concluded that e500v1 is not in use
with FreeBSD. Simplify the code path a bit, by unconditionally zeroing MAS7
instead of calling a subroutine to do it.
Summary:
With a sufficiently large TOC, it's possible to index out of range, as
the immediate load instructions only permit 16-bit indices, allowing up
to 64kB range (signed) from the base pointer. Allow +/- 2GB range, with
the medium code model TOC accesses in asm.
Patch originally by Brandon Bergren. The issue appears to impact ELFv2
more than ELFv1.
Reviewed by: luporl
Differential Revision: https://reviews.freebsd.org/D19708
Newer cores have the 'tlbilx' instruction, which doesn't broadcast over
CoreNet. This is significantly faster than walking the TLB to invalidate
the PID mappings. tlbilx with the arguments given takes 131 clock cycles to
complete, as opposed to 512 iterations through the loop plus tlbre/tlbwe at
each iteration.
MFC after: 3 weeks
Don't clobber the low part of the register restoring the high component of.
This could lead to very bad behavior if it's an ABI-affected register.
While here, also mark the asm volatile in the SPE high save case, to match
the load case.
Reported by: Branden Bergren (git_bdragon.rtk0.net)
MFC after: 1 week
Optimize the exception handler to only save and load the upper word of the
GPRs used in the emulating instruction. This reduces the save/load
overhead, and as a side effect does not overwrite the upper word of any
temporary register.
With this commit I am now able to run editors/abiword and math/gnumeric on a
e500-based system.
MFC after: 1 week
MFC With: r341752,r341751
The code was a near exact copy of the code in startup, but it doesn't need
the complexity since the kernel is already relocated. With
VM_MIN_KERNEL_ADDRESS as currently set to KERNBASE, this doesn't cause a
problem, because it's a zero offset. However, when KERNBASE is changed to a
physical load address, it then has a non-zero offset, and ends up with an
invalid stack pointer, causing the AP to hang.
The same behavior was moved to machdep.c, paired with AIM's relocation,
making this redundant. With this, it's now possible to boot FreeBSD with
ubldr on a uboot Book-E platform, even with a
KERNBASE != VM_MIN_KERNEL_ADDRESS.
The metadata pointer will almost never be at or above 'btext', as btext is a
relocated symbol, so will be based at VM_MIN_KERNEL_ADDRESS, not at
KERNBASE. Check the address against kernload, where the kernel is
physically loaded.
Book-E kernels really run at VM_MIN_KERNEL_ADDRESS, which currently happens to
be the same as KERNBASE. KERNBASE is the linked address, which the loader also
takes to be the physical load address. Treat KERNBASE as a physical address,
not a virtual, and change virtual address references for KERNBASE to use
something more appropriate.
debugf() is unnecessary for the TLB printing functions, as they're only
intended to be used from ddb. Instead, make them full DDB 'show'
commands, so now it can be written as 'show tlb1' and 'show tlb0'
instead of calling the function, hoping DEBUG has been defined.
The Signal Processing Engine (SPE) found in Freescale e500 cores (and
others) offloads IEEE-754 compliance (NaN, Inf handling, overflow,
underflow) to software, most likely as a means of simplifying the APU
silicon. Some software, like AbiWord, needs full IEEE-754 compliance,
including NaN handling. Implement the necessary bits to enable it.
Differential Revision: https://reviews.freebsd.org/D17446
This code caused more problems than it should have fixed (boot failures) on
the machines I tested, so has been commented out for a while now. Remove
it, and assume the errata fixups were done by the bootloader where they
belong.
Make int_external_input, int_decrementer, and int_performance_counter all
now use trap_common, just like on AIM. The effects of this are:
* All traps are now properly displayed in ddb. Previously traps from
external input, decrementer, and performance counters, would display as
just basic stack traces. Now the frame is displayed.
* External interrupts are now handled with interrupts enabled, so handling
can be preempted. This seems to fix a hang found post-r329882.
opt_compat.h is mentioned in nearly 180 files. In-progress network
driver compabibility improvements may add over 100 more so this is
closer to "just about everywhere" than "only some files" per the
guidance in sys/conf/options.
Keep COMPAT_LINUX32 in opt_compat.h as it is confined to a subset of
sys/compat/linux/*.c. A fake _COMPAT_LINUX option ensure opt_compat.h
is created on all architectures.
Move COMPAT_LINUXKPI to opt_dontuse.h as it is only used to control the
set of compiled files.
Reviewed by: kib, cem, jhb, jtl
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14941
TLB1 can handle ranges up to 4GB (through e5500, larger in e6500), but
ilog2() took a unsigned int, which maxes out at 4GB-1, but truncates
silently. Increase the input range to the largest supported, at least for
64-bit targets. This lets the DMAP be completely mapped, instead of only
1GB blocks with it assuming being fully mapped.
As with AIM64, map the DMAP at the beginning of the fourth "quadrant" of
memory, and move the KERNBASE to the the start of KVA.
Eventually we may run the kernel out of the DMAP, but for now, continue
booting as it has been.
assym is only to be included by other .s files, and should never
actually be assembled by itself.
Reviewed by: imp, bdrewery (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D14180
A reservation granule on PowerPC is a cache line.
On e500mc and derivatives a cacheline size is 64 bytes, not 32. Allocate
the maximum size permitted, but only utilize the size that is needed. On
e500v1 and e500v2 the reservation granule will still be 32 bytes.
Make vm_wait() take the vm_object argument which specifies the domain
set to wait for the min condition pass. If there is no object
associated with the wait, use curthread' policy domainset. The
mechanics of the wait in vm_wait() and vm_wait_domain() is supplied by
the new helper vm_wait_doms(), which directly takes the bitmask of the
domains to wait for passing min condition.
Eliminate pagedaemon_wait(). vm_domain_clear() handles the same
operations.
Eliminate VM_WAIT and VM_WAITPFAULT macros, the direct functions calls
are enough.
Eliminate several control state variables from vm_domain, unneeded
after the vm_wait() conversion.
Scetched and reviewed by: jeff
Tested by: pho
Sponsored by: The FreeBSD Foundation, Mellanox Technologies
Differential revision: https://reviews.freebsd.org/D14384
This is part of a long-term goal of merging Book-E and AIM into a single GENERIC
kernel. As more work is done, the struct may be optimized further.
Reviewed by: nwhitehorn
significant source of cache line contention from vm_page_alloc(). Use
accessors and vm_page_unwire_noq() so that the mechanism can be easily
changed in the future.
Reviewed by: markj
Discussed with: kib, glebius
Tested by: pho (earlier version)
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14273
global to per-domain state. Protect reservations with the free lock
from the domain that they belong to. Refactor to make vm domains more
of a first class object.
Reviewed by: markj, kib, gallatin
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14000
threads from compile-time defines to global variables. This removes a
significant amount of duplicated runtime patches to the compile-time
defines, centralizing the conditional logic in the early startup code.
Reviewed by: jhibbits
used with hashed page tables on AIM and place it into a new, modular pmap
function called pmap_decode_kernel_ptr(). This function is the inverse
of pmap_map_user_ptr(). With POWER9 radix tables, which mapping to use
becomes more complex than just AIM/BOOKE and it is best to have it in
the same place as pmap_map_user_ptr().
Reviewed by: jhibbits
buffers into a new pmap-module function pmap_map_user_ptr() that can
be implemented by the respective modules. This is required to implement
non-segment-based AIM-ish MMU systems such as the radix-tree page tables
introduced by POWER ISA 3.0 and present on POWER9.
Reviewed by: jhibbits
the 32-bit cookie can be sign-extended on its way out of the loader and
through Open Firmware. If sign-extended, the in-kernel check of its value
would fail on 64-bit systems, resulting in a mountroot prompt. Solve this
by telling the kernel to ignore the high-order bits.
PR: kern/224437
Submitted by: Gustavo Romero