Initialize CPUID.80000008H:ECX[7:0] with the number of logical processors in
the package. This fixes a panic during early boot in NetBSD 7.0 BETA.
Clear the Topology Extension feature bit from CPUID.80000001H:ECX since we
don't emulate leaves 0x8000001D and 0x8000001E. This fixes a divide by zero
panic in early boot in Centos 6.4.
Tested on an "AMD Opteron 6320" courtesy of Ben Perrault.
Reviewed by: grehan
options to display some key VMCB fields.
The set of valid options that can be passed to bhyvectl now depends on the
processor type. AMD-specific options are identified by a "--vmcb" or "--avic"
in the option name. Intel-specific options are identified by a "--vmcs" in
the option name.
Submitted by: Anish Gupta (akgupt3@gmail.com)
forced invalidation of the cache range regardless of the presence of
self-snoop feature. Some recent Intel GPUs in some modes are not
coherent, and dirty lines in CPU cache must be flushed before the
pages are transferred to GPU domain.
Reviewed by: alc (previous version)
Tested by: pho (amd64)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The hypervisor hides the MONITOR/MWAIT capability by unconditionally setting
CPUID.01H:ECX[3] to 0 so the guest should not expect these instructions to
be present anyways.
Discussed with: grehan
the PAT MSR on guest exit/entry. This workaround was done for a beta release
of VMware Fusion 5 but is no longer needed in later versions.
All Intel CPUs since Nehalem have supported saving and restoring MSR_PAT
in the VM exit and entry controls.
Discussed with: grehan
This patch adds support for MSI interrupts when running on Xen. Apart
from adding the Xen related code needed in order to register MSI
interrupts this patch also makes the msi_init function a hook in
init_ops, so different MSI implementations can have different
initialization functions.
Sponsored by: Citrix Systems R&D
xen/interface/physdev.h:
- Add the MAP_PIRQ_TYPE_MULTI_MSI to map multi-vector MSI to the Xen
public interface.
x86/include/init.h:
- Add a hook for setting custom msi_init methods.
amd64/amd64/machdep.c:
i386/i386/machdep.c:
- Set the default msi_init hook to point to the native MSI
initialization method.
x86/xen/pv.c:
- Set the Xen MSI init hook when running as a Xen guest.
x86/x86/local_apic.c:
- Call the msi_init hook instead of directly calling msi_init.
xen/xen_intr.h:
x86/xen/xen_intr.c:
- Introduce support for registering/releasing MSI interrupts with
Xen.
- The MSI interrupts will use the same PIC as the IO APIC interrupts.
xen/xen_msi.h:
x86/xen/xen_msi.c:
- Introduce a Xen MSI implementation.
x86/xen/xen_nexus.c:
- Overwrite the default MSI hooks in the Xen Nexus to use the Xen MSI
implementation.
x86/xen/xen_pci.c:
- Introduce a Xen specific PCI bus that inherits from the ACPI PCI
bus and overwrites the native MSI methods.
- This is needed because when running under Xen the MSI messages used
to configure MSI interrupts on PCI devices are written by Xen
itself.
dev/acpica/acpi_pci.c:
- Lower the quality of the ACPI PCI bus so the newly introduced Xen
PCI bus can take over when needed.
conf/files.i386:
conf/files.amd64:
- Add the newly created files to the build process.
- Host registers are now stored on the stack instead of a per-cpu host context.
- Host %FS and %GS selectors are not saved and restored across VMRUN.
- Restoring the %FS/%GS selectors was futile anyways since that only updates
the low 32 bits of base address in the hidden descriptor state.
- GS.base is properly updated via the MSR_GSBASE on return from svm_launch().
- FS.base is not used while inside the kernel so it can be safely ignored.
- Add function prologue/epilogue so svm_launch() can be traced with Dtrace's
FBT entry/exit probes. They also serve to save/restore the host %rbp across
VMRUN.
Reviewed by: grehan
Discussed with: Anish Gupta (akgupt3@gmail.com)
As of git submit e179f6914152eca9, the Linux kernel does a simple
probe of the PIC by writing a pattern to the IMR and then reading it
back, prior to the init sequence of ICW words.
The bhyve PIC emulation wasn't allowing the IMR to be read until
the ICW sequence was complete. This limitation isn't required so
relax the test.
With this change, Linux kernels 3.15-rc2 and later won't hang
on boot when calibrating the local APIC.
Reviewed by: tychon
MFC after: 3 days
When the FreeBSD kernel is loaded from Xen the symtab and strtab are
not loaded the same way as the native boot loader. This patch adds
three new global variables to ddb that can be used to specify the
exact position and size of those tables, so they can be directly used
as parameters to db_add_symbol_table. A new helper is introduced, so callers
that used to set ksym_start and ksym_end can use this helper to set the new
variables.
It also adds support for loading them from the Xen PVH port, that was
previously missing those tables.
Sponsored by: Citrix Systems R&D
Reviewed by: kib
ddb/db_main.c:
- Add three new global variables: ksymtab, kstrtab, ksymtab_size that
can be used to specify the position and size of the symtab and
strtab.
- Use those new variables in db_init in order to call db_add_symbol_table.
- Move the logic in db_init to db_fetch_symtab in order to set ksymtab,
kstrtab, ksymtab_size from ksym_start and ksym_end.
ddb/ddb.h:
- Add prototype for db_fetch_ksymtab.
- Declate the extern variables ksymtab, kstrtab and ksymtab_size.
x86/xen/pv.c:
- Add support for finding the symtab and strtab when booted as a Xen
PVH guest. Since Xen loads the symtab and strtab as NetBSD expects
to find them we have to adapt and use the same method.
amd64/amd64/machdep.c:
arm/arm/machdep.c:
i386/i386/machdep.c:
mips/mips/machdep.c:
pc98/pc98/machdep.c:
powerpc/aim/machdep.c:
powerpc/booke/machdep.c:
sparc64/sparc64/machdep.c:
- Use the newly introduced db_fetch_ksymtab in order to set ksymtab,
kstrtab and ksymtab_size.
For now restrict it to amd64. Other architectures might be
re-added later once tested.
Remove the drivers from the global NOTES and files files and move
them to the amd64 specifics.
Remove the drivers from the i386 modules build and only leave the
amd64 version.
Rather than depending on "inet" depend on "pci" and make sure that
ixl(4) and ixlv(4) can be compiled independently [2]. This also
allows the drivers to build properly on IPv4-only or IPv6-only
kernels.
PR: 193824 [2]
Reviewed by: eric.joyner intel.com
MFC after: 3 days
References:
[1] http://lists.freebsd.org/pipermail/svn-src-all/2014-August/090470.html
- CR2
- CR0, CR3, CR4 and EFER
- GDT/IDT base/limit fields
- CS/DS/ES/SS selector/base/limit/attrib fields
The caching can be further restricted via the tunable 'hw.vmm.svm.vmcb_clean'.
Restructure the code such that the fields above are only modified in a single
place. This makes it easy to invalidate the VMCB cache when any of these fields
is modified.
behavior was changed in r271888 so update the comment block to reflect this.
MSR_KGSBASE is accessible from the guest without triggering a VM-exit. The
permission bitmap for MSR_KGSBASE is modified by vmx_msr_guest_init() so get
rid of redundant code in vmx_vminit().
code. There are only a handful of MSRs common between the two so there isn't
too much duplicate functionality.
The VT-x code has the following types of MSRs:
- MSRs that are unconditionally saved/restored on every guest/host context
switch (e.g., MSR_GSBASE).
- MSRs that are restored to guest values on entry to vmx_run() and saved
before returning. This is an optimization for MSRs that are not used in
host kernel context (e.g., MSR_KGSBASE).
- MSRs that are emulated and every access by the guest causes a trap into
the hypervisor (e.g., MSR_IA32_MISC_ENABLE).
Reviewed by: grehan
- Note the quirk with the interrupt enabled state of the dna handler.
- Use just panic() instead of printf() and panic(). Print tid instead
of pid, the fpu state is per-thread.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
for amd64/linux32. Fix the entirely bogus (untested) version from
r161310 for i386/linux using the same shared code in compat/linux.
It is unclear to me if we could support more clock mappings but
the current set allows me to successfully run commercial
32bit linux software under linuxolator on amd64.
Reviewed by: jhb
Differential Revision: D784
MFC after: 3 days
Sponsored by: DARPA, AFRL
Keep track of NMI blocking by enabling the IRET intercept on a successful
vNMI injection. The NMI blocking condition is cleared when the handler
executes an IRET and traps back into the hypervisor.
Don't inject NMI if the processor is in an interrupt shadow to preserve the
atomic nature of "STI;HLT". Take advantage of this and artificially set the
interrupt shadow to prevent NMI injection when restarting the "iret".
Reviewed by: Anish Gupta (akgupt3@gmail.com), grehan
Get rid of unused 'svm_feature' from the softc.
Get rid of the redundant 'vcpu_cnt' checks in svm.c. There is a similar check
in vmm.c against 'vm->active_cpus' before the AMD-specific code is called.
Submitted by: Anish Gupta (akgupt3@gmail.com)
processor. Briefly, the hypervisor sets V_INTR_VECTOR to the APIC vector
and sets V_IRQ to 1 to indicate a pending interrupt. The hardware then takes
care of injecting this vector when the guest is able to receive it.
Legacy PIC interrupts are still delivered via the event injection mechanism.
This is because the vector injected by the PIC must reflect the state of its
pins at the time the CPU is ready to accept the interrupt.
Accesses to the TPR via %CR8 are handled entirely in hardware. This requires
that the emulated TPR must be synced to V_TPR after a #VMEXIT.
The guest can also modify the TPR via the memory mapped APIC. This requires
that the V_TPR must be synced with the emulated TPR before a VMRUN.
Reviewed by: Anish Gupta (akgupt3@gmail.com)
VM-exit and ultimately on whether nRIP is valid. This allows us to update
the %rip after the emulation is finished so any exceptions triggered during
the emulation will point to the right instruction.
Don't attempt to handle INS/OUTS VM-exits unless the DecodeAssist capability
is available. The effective segment field in EXITINFO1 is not valid without
this capability.
Add VM_EXITCODE_SVM to flag SVM VM-exits that cannot be handled. Provide the
VMCB fields exitinfo1 and exitinfo2 as collateral to help with debugging.
Provide a SVM VM-exit handler to dump the exitcode, exitinfo1 and exitinfo2
fields in bhyve(8).
Reviewed by: Anish Gupta (akgupt3@gmail.com)
Reviewed by: grehan
- Don't enable the HLT intercept by default. It will be enabled by bhyve(8)
if required. Prior to this change HLT exiting was always enabled making
the "-H" option to bhyve(8) meaningless.
- Recognize a VM exit triggered by a non-maskable interrupt. Prior to this
change the exit would be punted to userspace and the virtual machine would
terminate.
instruction bytes in the VMCB on a nested page fault. This is useful because
it saves having to walk the guest page tables to fetch the instruction.
vie_init() now takes two additional parameters 'inst_bytes' and 'inst_len'
that map directly to 'vie->inst[]' and 'vie->num_valid'.
The instruction emulation handler skips calling 'vmm_fetch_instruction()'
if 'vie->num_valid' is non-zero.
The use of this capability can be turned off by setting the sysctl/tunable
'hw.vmm.svm.disable_npf_assist' to '1'.
Reviewed by: Anish Gupta (akgupt3@gmail.com)
Discussed with: grehan
by explicitly moving it out of the interrupt shadow. The hypervisor is done
"executing" the HLT and by definition this moves the vcpu out of the
1-instruction interrupt shadow.
Prior to this change the interrupt would be held pending because the VMCS
guest-interruptibility-state would indicate that "blocking by STI" was in
effect. This resulted in an unnecessary round trip into the guest before
the pending interrupt could be injected.
Reviewed by: grehan
window exiting. This simply involves setting V_IRQ and enabling the VINTR
intercept. This instructs the CPU to trap back into the hypervisor as soon
as an interrupt can be injected into the guest. The pending interrupt is
then injected via the traditional event injection mechanism.
Rework vcpu interrupt injection so that Linux guests now idle with host cpu
utilization close to 0%.
Reviewed by: Anish Gupta (earlier version)
Discussed with: grehan
AP startup and AP resume (it was already used for BSP startup and BSP
resume).
- Split code to do one-time probing of cache properties out of
initializecpu() and into initializecpucache(). This is called once on
the BSP during boot.
- Move enable_sse() into initializecpu().
- Call initializecpu() for AP startup instead of enable_sse() and
manually frobbing MSR_EFER to enable PG_NX.
- Call initializecpu() when an AP resumes. In theory this will now
properly re-enable PG_NX in MSR_EFER when resuming a PAE kernel on
APs.
Provide APIs svm_enable_intercept()/svm_disable_intercept() to add/delete
VMCB intercepts. These APIs ensure that the VMCB state cache is invalidated
when intercepts are modified.
Each intercept is identified as a (index,bitmask) tuple. For e.g., the
VINTR intercept is identified as (VMCB_CTRL1_INTCPT,VMCB_INTCPT_VINTR).
The first 20 bytes in control area that are used to enable intercepts
are represented as 'uint32_t intercept[5]' in 'struct vmcb_ctrl'.
Modify svm_setcap() and svm_getcap() to use the new APIs.
Discussed with: Anish Gupta (akgupt3@gmail.com)
