The flag specifies that vm_fault() handler should check the vnode'
vm_object size under the vnode lock. It is converted into the object'
OBJ_SIZEVNLOCK flag in vnode_pager_alloc().
Tested by: pho
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D21883
This change consists of two parts.
First, nctgpio now supports hardware access via an I/O port window if
it's configured by firmware. For instance, PC Engines firmware
v4.10.0.2 does that. This is faster than going through the Super I/O
configuration registers.
Second, nctgpio now caches values of bits that it controls. For
example, the driver does not need to access the hardware to determine if
a pin is an output or an input, or a state of an output. Also, the
driver makes use of the fact that the hardware preserves an output state
of a pin accross a switch to the input mode and back.
With this change I am able to use the 1-Wire bus over nctgpio whereas
previously the driver introduced too much latency to be compliant with
the relatively strict protocol timings.
superio0: <Nuvoton NCT5104D/NCT6102D/NCT6106D (rev. B+)> at port 0x2e-0x2f on isa0
gpio1: <Nuvoton GPIO controller> at GPIO ldn 0x07 on superio0
pcib0: allocated type 4 (0x220-0x226) for rid 0 of gpio1
gpiobus1: <GPIO bus> on gpio1
owc0: <GPIO attached one-wire bus> at pin 4 on gpiobus1
ow0: <1 Wire Bus> on owc0
ow0: romid 28:b2:9e:45:92:10:02:34: no driver
ow_temp0: <Advanced One Wire Temperature> romid 28:b2:9e:45:92:10:02:34 on ow0
MFC after: 4 weeks
The correctness of per-CPU cache accounting in that function is
dependent on reading per-CPU pointers exactly once. Ensure that
the compiler does not emit multiple loads of those pointers.
Reported and tested by: pho
Reviewed by: kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22081
Simply adding MODULE_VERSION does not do the trick, because the modules
haven't been declared. This should actually fix modfind/kldstat, which
r351229 aimed and failed to do.
This should make vm-bhyve do the right thing again when using the ports
version, rather than the latest version not in ports.
MFC after: 3 days
These drivers have been merged into a single if_tuntap in 13.0. The
compatibility links existed only for the interim and will be MFC'd along
with the if_tuntap merge shortly.
MFC after: never
This driver seems to have a bug. The bug was carefully saved during
conversion. In the al_eth_mac_table_unicast_add() the argument 'addr',
which is the actual address is unused. So, the function is called as
many times as we have addresses, but with the exactly same argument
list. This doesn't make any sense, but was preserved.
net.link.tap.user_open has historically allowed non-root users to do devfs
cloning and open /dev/tap* nodes based on permissions. Loosen this up to
make it only allow users to do devfs cloning -- we no longer check it in
tunopen.
This allows tap devices to be created that can actually be opened by a user,
rather than swiftly restricting them to root because the magic sysctl has
not been set.
The sysctl has not yet been completely deprecated, because more thought is
needed for how to handle the devfs cloning case. There is not an easy
suitable replacement for the sysctl there, and more care needs to be placed
in determining whether that's OK or not.
PR: 200185
When shutting down a VNET we did not cleanup the fragmentation hashes.
This has multiple problems: (1) leak memory but also (2) leak on the
global counters, which might eventually lead to a problem on a system
starting and stopping a lot of vnets and dealing with a lot of IPv6
fragments that the counters/limits would be exhausted and processing
would no longer take place.
Unfortunately we do not have a useable variable to indicate when
per-VNET initialization of frag6 has happened (or when destroy happened)
so introduce a boolean to flag this. This is needed here as well as
it was in r353635 for ip_reass.c in order to avoid tripping over the
already destroyed locks if interfaces go away after the frag6 destroy.
While splitting things up convert the TRY_LOCK to a LOCK operation in
now frag6_drain_one(). The try-lock was derived from a manual hand-rolled
implementation and carried forward all the time. We no longer can afford
not to get the lock as that would mean we would continue to leak memory.
Assert that all the buckets are empty before destroying to lock to
ensure long-term stability of a clean shutdown.
Reported by: hselasky
Reviewed by: hselasky
MFC after: 3 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D22054
Add a read-only sysctl exporting the global number of fragments
(base system and all vnets). This is helpful to (a) know how many
fragments are currently being processed, (b) if there are possible
leaks, (c) if vnet teardown is not working correctly, and lastly
(d) it can be used as part of test-suits to ensure (a) to (c).
MFC after: 3 weeks
Sponsored by: Netflix
cdevpriv dtors will be called when the reference count on the associated
struct file drops to 0, while d_close can be unreliable for cleaning up
state at "last close" for a number of reasons. As far as tunclose/tundtor is
concerned the difference is minimal, so make the switch.
This allows us to avoid some dance in tunopen for dealing with the
possibility of dev->si_drv1 being NULL as it's set prior to the devfs node
being created in all cases.
There's still the possibility that the tun device hasn't been fully
initialized, since that's done after the devfs node was created. Alleviate
this by returning ENXIO if we're not to that point of tuncreate yet.
This work is what sparked r353128, full initialization of cloned devices
w/ specified make_dev_args.
- In em_msix_link(), properly handle IGB-class devices after the iflib(4)
conversion again by only setting EM_MSIX_LINK for the EM-class 82574
and by re-arming link interrupts unconditionally, i. e. not only in
case of spurious interrupts. This fixes the interface link state change
detection for the IGB-class. [1]
- In em_if_update_admin_status(), only re-arm the link state change
interrupt for 82574 and also only if such a device uses MSI-X, i. e.
takes advantage of autoclearing. In case of INTx and MSI as well as
for LEM- and IGB-class devices, re-arming isn't appropriate here and
setting EM_MSIX_LINK isn't either.
While at it, consistently take advantage of the hw variable.
PR: 236724 [1]
Differential Revision: https://reviews.freebsd.org/D21924
MAS8 is hypervisor privileged, defining the logical partition (VM) to
operate on for TLB accesses. It's already guaranteed to be cleared when
booting bare metal (bootloader needs it zeroed to work), and we can't touch
it from a guest. Assume that if/when we eventually port bhyve to PowerPC
(and Book-E) the hypervisor module will take care of managing MAS8. This
saves several (tens) of clocks on each TLB miss.
MFC after: 2 weeks
in simple multifunction driver.
- follow interrupt changes in DT. Split old ICU driver to function oriented
parts and add drivers for newly defined parts (system error interrupts).
- Many drivers are children of simple multifunction driver. But after r349596
simple MF driver doesn't longer exports memory resources, and all children
must use syscon interface to access their registers. Adapt affected
drivers to this fact.
MFC after: 3 weeks
Thanks to cem@ for discussing the issue which resulted in this patch.
Reviewed by: cem@
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D22089
The rationale is pretty much the same as in r353747.
There is no subsequent dependent store.
The store is to the regular (TSO) memory anyway.
MFC after: 23 days
After removing wmb(), vm_set_rendezvous_func() became super trivial, so
there was no point in keeping it.
The wmb (sfence on amd64, lock nop on i386) was not needed. This can be
explained from several points of view.
First, wmb() is used for store-store ordering (although, the primitive
is undocumented). There was no obvious subsequent store that needed the
barrier.
Second, x86 has a memory model with strong ordering including total
store order. An explicit store barrier may be needed only when working
with special memory (device, special caching mode) or using special
instructions (non-temporal stores). That was not the case for this
code.
Third, I believe that there is a misconception that sfence "flushes" the
store buffer in a sense that it speeds up the propagation of stores from
the store buffer to the global visibility. I think that such
propagation always happens as fast as possible. sfence only makes
subsequent stores wait for that propagation to complete. So, sfence is
only useful for ordering of stores and only in the situations described
above.
Reviewed by: jhb
MFC after: 23 days
Differential Revision: https://reviews.freebsd.org/D21978
This patch is part of an effort to make bhyve networking (in particular TCP)
faster. The key strategy to enhance TCP throughput is to let the whole packet
datapath work with TSO/LRO packets (up to 64KB each), so that the per-packet
overhead is amortized over a large number of bytes.
This capability is supported in the guest by means of the vtnet(4) driver,
which is able to handle TSO/LRO packets leveraging the virtio-net header
(see struct virtio_net_hdr and struct virtio_net_hdr_mrg_rxbuf).
A bhyve VM exchanges packets with the host through a network backend,
which can be vale(4) or if_tap(4).
While vale(4) supports TSO/LRO packets, if_tap(4) does not.
This patch extends if_tap(4) with the ability to understand the virtio-net
header, so that a tapX interface can process TSO/LRO packets.
A couple of ioctl commands have been added to configure and probe the
virtio-net header. Once the virtio-net header is set, the tapX interface
acquires all the IFCAP capabilities necessary for TSO/LRO.
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D21263
They're formatted into the device name like unit numbers, anyway; store the
number in mda_unit => si_drv0 like dev2unit() expects.
No functional change intended.
Sponsored by: Dell EMC Isilon
In low memory conditions a significant number of pages may end up stuck
in the caches, and currently these caches cannot be reaped, leading to
spurious memory allocation failures and OOM kills. So:
- Take into account the fact that we may cache up to two full buckets
of pages per CPU, not just one.
- Increase the amount of RAM required per CPU to enable the caches.
This is a temporary measure until the page cache management policy is
improved.
PR: 241048
Reported and tested by: Kevin Oberman <rkoberman@gmail.com>
Reviewed by: alc, kib
Discussed with: jeff
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22040
The softdep lock names were unusually long and tended to stick out in
lock profiling reports. Abbreviate them and make them consistent with
our conventional style for lock names.
Reviewed by: mckusick
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22042
- We load the kernel at 0x200000. Memory below that address need not
be executable, so do not map it as such.
- Remove references to .ldata and related sections in the kernel linker
script. They come from ld.bfd's default linker script, but are not
used, and we now use ld.lld to link the amd64 kernel. lld does not
contain a default linker script.
- Pad the .bss to a 2MB as we do between .text and .data. This
forces the loader to load additional files starting in the following
2MB page, preserving the use of superpage mappings for kernel data.
- Map memory above the kernel image with NX. The kernel linker now
upgrades protections as needed, and other preloaded file types
(e.g., entropy, microcode) need not be mapped with execute permissions
in the first place.
Reviewed by: kib
MFC after: 1 month
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21859
With an upcoming change the amd64 kernel will map preloaded files RW
instead of RWX, so the kernel linker must adjust protections
appropriately using pmap_change_prot().
Reviewed by: kib
MFC after: 1 month
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21860
Use the section flags to derive mapping protections. When multiple
sections overlap within a page, the union of their protections must be
applied. With r353701 the .text and .rodata sections are padded to
ensure that this does not happen on amd64.
Reviewed by: kib
MFC after: 1 month
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21896
Move futex_mtx to linux_common.ko for amd64 and aarch64 along
with respective list/mutex init/destroy.
PR: 240989
Reported by: Alex S <iwtcex@gmail.com>
Move futex_list definition to linux.c which is included once
in linux.ko (i386) and in linux_common.ko (amd64 and aarch64)
allowing 32/64 bit linux programs to access the same futexes
in the latter case.
PR: 240989
Reviewed by: dchagin
Differential Revision: https://reviews.freebsd.org/D22073
icmp_reflect(), called through icmp_error() requires us to be in NET_EPOCH.
Failure to hold it leads to the following panic (with INVARIANTS):
panic: Assertion in_epoch(net_epoch_preempt) failed at /usr/src/sys/netinet/ip_icmp.c:742
cpuid = 2
time = 1571233273
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe00e0977920
vpanic() at vpanic+0x17e/frame 0xfffffe00e0977980
panic() at panic+0x43/frame 0xfffffe00e09779e0
icmp_reflect() at icmp_reflect+0x625/frame 0xfffffe00e0977aa0
icmp_error() at icmp_error+0x720/frame 0xfffffe00e0977b10
pf_intr() at pf_intr+0xd5/frame 0xfffffe00e0977b50
ithread_loop() at ithread_loop+0x1c6/frame 0xfffffe00e0977bb0
fork_exit() at fork_exit+0x80/frame 0xfffffe00e0977bf0
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe00e0977bf0
Note that we now enter NET_EPOCH twice if we enter ip_output() from pf_intr(),
but ip_output() will soon be converted to a function that requires epoch, so
entering NET_EPOCH directly from pf_intr() makes more sense.
Discussed with: glebius@
The sentinel value for "use the rest of the region," -1, isn't zero modulo
PAGE_SIZE. Relax the check to permit the intended special value.
X-MFC-With: r353110
Sponsored by: Dell EMC Isilon
Rather than a few scattered places in the tree. Organize flag names in a
contiguous region of specialreg.h.
While here, delete deprecated PCOMMIT from leaf 7.
No functional change.
When the underlying debugport transport is reliable, GDB's additional
checksums and acknowledgements are redundant. NoAckMode eliminates the
the acks and allows us to skip checking RX checksums. The GDB packet
framing does not change, so unfortunately (valid) checksums are still
included as message trailers.
The gdb(4) stub in FreeBSD advertises support for the feature in response to
the client's 'qSupported' request IFF the current debugport has the
gdb_dbfeatures flag GDB_DBGP_FEAT_RELIABLE set. Currently, only netgdb(4)
supports this feature.
If the remote GDB client supports the feature and does not have it disabled
via a GDB configuration knob, it may instruct our gdb(4) stub to enter
NoAckMode. Unless and until it issues that command, we must continue to
transmit acks as usual (and for now, we continue to wait until we receive
them as well, even if we know the debugport is on a reliable transport).
In the kernel sources, the sense of the flag representing the state of the
feature is reversed from that of the GDB command. (I.e., it is
'gdb_ackmode', not 'gdb_noackmode.') This is to avoid confusing double-
negative conditions.
For reference, see:
* https://sourceware.org/gdb/onlinedocs/gdb/Packet-Acknowledgment.html
* https://sourceware.org/gdb/onlinedocs/gdb/General-Query-Packets.html#QStartNoAckMode
Reviewed by: jhb, markj (both earlier version)
Differential Revision: https://reviews.freebsd.org/D21761
Use it to pad the text and read-only data sections to a 4KB boundary.
This will be used to enforce strict memory protections for some
sections of loadable kernel modules.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21970
NetGDB(4) is a component of a system using a panic-time network stack to
remotely debug crashed FreeBSD kernels over the network, instead of
traditional serial interfaces.
There are three pieces in the complete NetGDB system.
First, a dedicated proxy server must be running to accept connections from
both NetGDB and gdb(1), and pass bidirectional traffic between the two
protocols.
Second, the NetGDB client is activated much like ordinary 'gdb' and
similarly to 'netdump' in ddb(4) after a panic. Like other debugnet(4)
clients (netdump(4)), the network interface on the route to the proxy server
must be online and support debugnet(4).
Finally, the remote (k)gdb(1) uses 'target remote <proxy>:<port>' (like any
other TCP remote) to connect to the proxy server.
The NetGDB v1 protocol speaks the literal GDB remote serial protocol, and
uses a 1:1 relationship between GDB packets and sequences of debugnet
packets (fragmented by MTU). There is no encryption utilized to keep
debugging sessions private, so this is only appropriate for local
segments or trusted networks.
Submitted by: John Reimer <john.reimer AT emc.com> (earlier version)
Discussed some with: emaste, markj
Relnotes: sure
Differential Revision: https://reviews.freebsd.org/D21568
- Remove a redundant assignment of ef->address.
- Don't return a Mach error number to the caller if vm_map_find() fails.
- Use ptoa() and fix style.
MFC after: 2 weeks
Sponsored by: Netflix
At least one small update to the out-of-tree DRM drivers is required
now that cdev_pager_free_page() expects an xbusy page.
Discussed with: jeff, zeising
It remains unattached to any client protocol. Netdump is unaffected
(remaining half-duplex). The intended consumer is NetGDB.
Submitted by: John Reimer <john.reimer AT emc.com> (earlier version)
Discussed with: markj
Differential Revision: https://reviews.freebsd.org/D21541
Loosen requirements for connecting to debugnet-type servers. Only require a
destination address; the rest can theoretically be inferred from the routing
table.
Relax corresponding constraints in netdump(4) and move ifp validation to
debugnet connection time.
Submitted by: John Reimer <john.reimer AT emc.com> (earlier version)
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D21482
Follow-up to incomplete pedantic change in r353691 by actually fixing the
default implementation to match the interface type. Mea culpa.
X-MFC-With: r353691, r339754
Add a 'X -s <server> -c <client> [-g <gateway>] -i <interface>' subroutine
to the generic debugnet code. The imagined use is both netdump, shown here,
and NetGDB (vaporware). It uses the ddb(4) lexer, with some new extensions,
to parse out IPv4 addresses.
'Netdump' uses the generic debugnet routine to load a configuration and
start a dump, without any netdump configuration prior to panic.
Loosely derived from work by: John Reimer <john.reimer AT emc.com>
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D21460
After r339754, the additional interface parameter was accidentally left out
of the default acpi_generic_id_probe implementation. Apparently this does
not cause any real problems, so this fix is mostly stylistic.
No functional change intended.
X-MFC-With: r339754
This allows ddb(4) commands to construct a static dumperinfo during
panic/debug and invoke doadump(false) using the provided dumper
configuration (always inserted first in the list).
The intended usecase is a ddb(4)-time netdump(4) command.
Reviewed by: markj (earlier version)
Differential Revision: https://reviews.freebsd.org/D21448
The in-tree netdump code has always ignored non-directed ARP requests, and
that seems to work most of the time for netdump.
In my work and testing on NetGDB, it seems like sometimes the remote FreeBSD
conversant (the non-panic system) will send broadcast-destination ARP
requests to the debugnet kernel; without this change, those are dropped and
the remote will see EHOSTDOWN "Host is down" errors from the userspace
interface of the network stack.
Discussed with: markj
Similar to INET checksums, lazily validate UDP checksums when the driver has
already performed the check for us. Like debugnet(4) INET checksums,
validation in software is left as future work.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D21745
Debugnet is a simplistic and specialized panic- or debug-time reliable
datagram transport. It can drive a single connection at a time and is
currently unidirectional (debug/panic machine transmit to remote server
only).
It is mostly a verbatim code lift from netdump(4). Netdump(4) remains
the only consumer (until the rest of this patch series lands).
The INET-specific logic has been extracted somewhat more thoroughly than
previously in netdump(4), into debugnet_inet.c. UDP-layer logic and up, as
much as possible as is protocol-independent, remains in debugnet.c. The
separation is not perfect and future improvement is welcome. Supporting
INET6 is a long-term goal.
Much of the diff is "gratuitous" renaming from 'netdump_' or 'nd_' to
'debugnet_' or 'dn_' -- sorry. I thought keeping the netdump name on the
generic module would be more confusing than the refactoring.
The only functional change here is the mbuf allocation / tracking. Instead
of initiating solely on netdump-configured interface(s) at dumpon(8)
configuration time, we watch for any debugnet-enabled NIC for link
activation and query it for mbuf parameters at that time. If they exceed
the existing high-water mark allocation, we re-allocate and track the new
high-water mark. Otherwise, we leave the pre-panic mbuf allocation alone.
In a future patch in this series, this will allow initiating netdump from
panic ddb(4) without pre-panic configuration.
No other functional change intended.
Reviewed by: markj (earlier version)
Some discussion with: emaste, jhb
Objection from: marius
Differential Revision: https://reviews.freebsd.org/D21421
r259680 added support to vt(4) for printing double-width characters.
Remove the comment that claims no support.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
This can be used to group all threads belonging to a single logical
entity under a common kernel process.
I am planning to use the new interface for ZFS threads.
MFC after: 4 weeks
This change applies some suggestions by delphij from D21979.
A write-only variable is removed.
There is a diagnostic message if the driver does not recognize the chip.
A chained if-statement is converted to a switch.
MFC after: 3 weeks
Older network equipment used the ethertypes 0x9100, 0x9200, and 0x9300 for
outer VLANs, before standardisation introduced 0x88a8.
Submitted by: Lutz Donnerhacke <lutz_donnerhacke.de>
Differential Revision: https://reviews.freebsd.org/D21846
Automatically apply ldscript.kmod.${MACHINE_ARCH} if it exists.
We already have an i386-specific linker script; rename it accordingly.
Note that the linker script is applied when the object files are
partially linked. (For amd64 this is also the final link.)
Reviewed by: imp, kib
Discussed with: jhb
MFC after: 1 week
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21887
This updates the protection attributes of subranges of the kernel map.
Unlike pmap_protect(), which is typically used for user mappings,
pmap_change_prot() does not perform lazy upgrades of protections.
pmap_change_prot() also updates the aliasing range of the direct map.
Reviewed by: kib
MFC after: 1 month
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21758
After r352110 the page lock no longer protects a page's identity, so
there is no purpose in locking the page in pmap_mincore(). Instead,
if vm.mincore_mapped is set to the non-default value of 0, re-lookup
the page after acquiring its object lock, which holds the page's
identity stable.
The change removes the last callers of vm_page_pa_tryrelock(), so
remove it.
Reviewed by: kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21823
filling in the same defaults that the current userland module uses.
This allows an old geom_nop.so userland module to work with a new kernel.
Approved by: imp (mentor)
Reviewed by: cem
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21972
the request. It is the same as gctl_get_paraml() except that the request
is not marked with an error if the parameter is not present.
Approved by: imp (mentor)
Reviewed by: cem
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21972
From Jake:
When updating the device statistics, report whether or not we have
received any pause frames to the iflib stack. This allows the iflib
stack to avoid generating a Tx hang message while the device is paused.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: gallatin@
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21870
From Jake:
Notify the iflib stack of whether we received any pause frames during
the timer window. This allows the stack to avoid reporting a Tx hang due
to the device being paused.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: gallatin@
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21869
From Jake:
The e1000 driver sets the iflib shared context isc_pause_frames value to
the number of received xoff frames. This is done so that the iflib
watchdog timer won't trigger a Tx Hang due to pause frames.
Unfortunately, the function simply sets it to the value of the xoffrxc
counter. Once the device has received a single XOFF packet, the driver
always reports that we received pause frames. This will prevent the Tx
hang detection entirely from that point on.
Fix this by assigning isc_pause_frames to a non-zero value if we
received any XOFF packets in the last timer interval.
We could attempt to calculate the total number of received packets by
doing a subtraction, but the iflib stack only seems to check if
isc_pause_frames is non-zero.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: gallatin@
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21868
general is allowed to sleep. Don't enter the epoch for the
whole duration. If some event handlers need the epoch, they
should handle that theirselves.
Discussed with: hselasky
in this driver indicate that the SD_CAPA register is write-once and after
being set one time the values in it cannot be changed. That turns out not
to be the case -- the values written to it survive a reset, but they can
be rewritten/changed at any time.
should be) correct, they lead to the eMMC on a Beaglebone failing to work
in some situations.
The TI sdhci hardware is kind of strange. The first device inherently
supports 1.8v and 3.3v and the abililty to switch between them, and the
other two devices must be set to 1.8v in the sdhci power control register to
operate correctly, but doing so actually makes them run at 3.3v (unless an
external level-shifter is present in the signal path). Even the 1.8v on the
first device may actually be 3.3v (or any other value), depending on what
voltage is fed to the VDDS1-VDDS7 power supply pins on the am335x chip.
Another strange quirk is that the convention for am335x sdhci drivers in
linux and uboot and the am335x boot ROM seems to be to set the voltage in
the sdhci capabilities register to 3.0v even though the actual voltage is
3.3v. Why this is done is a complete mystery to me, but it seems to be
required for correct operation.
If we had complete modern support for the am335x chip we could get the
actual voltages from the FDT data and the regulator framework. But our
am335x code currently doesn't have any regulator framework support.
Reverting to the prior code will get the popular Beaglebone boards working
again.
This is part of the fix for PR 241301, but also requires r353651 for a
complete fix.
PR: 241301
Discussed with: manu
the slot is flagged as 'embedded'.
The features related to embedded and shared slots were added in v3.0 of
the sdhci spec. Hardware prior to v3 sometimes supported 1.8v on non-
removable devices in embedded systems, but had no way to indicate that
via the standard sdhci registers (instead they use out of band metadata
such as FDT data).
This change adds the controller specification version to the check for
whether to filter out the 1.8v selection. On older hardware, the 1.8v
option is allowed to remain. On 3.0 or later it still requires the
embedded-slot flag to remain.
This is part of the fix for PR 241301 (eMMC not detected on Beaglebone).
Changes to the sdhci_ti driver are also needed for a full fix.
PR: 241301
moea_pvo_remove() might remove the last mapping of a page, in which case
it is clearly no longer writeable. This can happen via pmap_remove(),
or when a CoW fault removes the last mapping of the old page.
Reported and tested by: bdragon
Reviewed by: alc, bdragon, kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22044
This allows to remove a bunch of low level code.
Also, superio(4) provides safer interaction with other drivers
that work with Super I/O configuration registers.
Tested only on PCengines APU2:
superio0: <Nuvoton NCT5104D/NCT6102D/NCT6106D (rev. B+)> at port 0x2e-0x2f on isa0
wbwd0: <Nuvoton NCT6102 (0xc4/0x53) Watchdog Timer> at WDT ldn 0x08 on superio0
The watchdog output is incorrectly wired on that system and the watchdog
does not really do it its job, but the pulse can be seen with a signal
analyzer.
Reviewed by: delphij, bcr (man page)
MFC after: 19 days
Differential Revision: https://reviews.freebsd.org/D21979
This is where it logically belongs.
The change allows to drop a bunch of low lewel code.
Reviewed by: gonzo
MFC after: 19 days
Differential Revision: https://reviews.freebsd.org/D21980
Arm updates these with each new architecture revision. To help keep them
updated use a collection of tables to hold the needed information to
decode these registers.
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22020
The timespec struct holds a seconds value in a time_t and a nanoseconds
value in a long. On most architectures these are the same size, however
on 32-bit architectures other than i386 time_t is 8 bytes and long is
4 bytes.
Most ABIs will then pad a struct holding an 8 byte and 4 byte value to
16 bytes with 4 bytes of padding. When copying one of these structs the
compiler is free to copy the padding if it wishes.
In this case the padding may contain kernel data that is then leaked to
userspace. Fix this by copying the timespec elements rather than the
entire struct.
This doesn't affect Tier-1 architectures so no SA is expected.
admbugs: 651
MFC after: 1 week
Sponsored by: DARPA, AFRL
illumos/illumos-gate@c4ab0d3f46c4ab0d3f46https://www.illumos.org/issues/10809
Port ZoL ee36c709c3 Performance optimization of AVL tree comparator functions
This is a followup to r337567 that imported the ZoL commit directly into
FreeBSD. It seems that at the time we did not have some of the earlier
changes, so some pieces of the ZoL change were not applicable. Also,
the illumos version got a few style cleanups. Some changes were missed
or incorrectly merged (e.g., vdev_cache_lastused_compare and
metaslab_rangesize_compare).
Obtained from: ZoL, illumos
MFC after: 25 days
X-MFC after: r353634
partial fragmented packets before a network interface is detached.
When sending IPv4 or IPv6 fragmented packets and a fragment is lost
before the network device is freed, the mbuf making up the fragment
will remain in the temporary hashed fragment list and cause a panic
when it times out due to accessing a freed network interface
structure.
1) Make sure the m_pkthdr.rcvif always points to a valid network
interface. Else the rcvif field should be set to NULL.
2) Use the rcvif of the last received fragment as m_pkthdr.rcvif for
the fully defragged packet, instead of the first received fragment.
Panic backtrace for IPv6:
panic()
icmp6_reflect() # tries to access rcvif->if_afdata[AF_INET6]->xxx
icmp6_error()
frag6_freef()
frag6_slowtimo()
pfslowtimo()
softclock_call_cc()
softclock()
ithread_loop()
Reviewed by: bz
Differential Revision: https://reviews.freebsd.org/D19622
MFC after: 1 week
Sponsored by: Mellanox Technologies
illumos/illumos-gate@7931524763
FreeBSD note: some tweaking was needed to avoid a conflict with
sys/rangelock.h.
Author: Matthew Ahrens <mahrens@delphix.com>
Obtained from: illumos
MFC after: 3 weeks
This reduces the number of references to VLAN_TRUNKDEV() in ibcore.
Currently only VLAN is supported as a child interface in FreeBSD.
Remove superfluous RCU locking.
Sponsored by: Mellanox Technologies
The VM_PAGE_OBJECT_BUSY_ASSERT() in pmap_enter() implementation should
be only asserted when the code is executed as result of pmap_enter(),
not when the same code is entered from e.g. pmap_enter_quick(). This
is relevant for all PowerPC pmap variants, because mmu_*_enter() is
used as the backend, and assert is located there.
Add a PowerPC private pmap_enter() PMAP_ENTER_QUICK_LOCKED flag to
indicate that the call is not from pmap_enter(). For non-quick-locked
calls, assert that the object is locked.
Reported and tested by: bdragon
Reviewed by: alc, bdragon, markj
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D22041
illumos/illumos-gate@52abb70e0752abb70e07https://www.illumos.org/issues/9691
When iterating over a ZAP object, we're almost always certain to
iterate over the entire object. If there are multiple leaf blocks, we
can realize a performance win by issuing reads for all the leaf blocks
in parallel when the iteration begins.
For example, if we have 10,000 snapshots, "zfs destroy -nv
pool/fs@1%9999" can take 30 minutes when the cache is cold. This
change provides a >3x performance improvement, by issuing the reads
for all ~64 blocks of each ZAP object in parallel.
Author: Matthew Ahrens <mahrens@delphix.com>
Obtained from: illumos
MFC after: 2 weeks
illumos/illumos-gate@d0cb1fb926d0cb1fb926https://www.illumos.org/issues/9425
Problem Statement
ZFS Channel program scripts currently require a timeout, so that hung
or long-running scripts return a timeout error instead of causing ZFS
to get wedged. This limit can currently be set up to 100 million Lua
instructions. Even with a limit in place, it would be desirable to
have a sys admin (support engineer) be able to cancel a script that is
taking a long time.
Proposed Solution
Make it possible to abort a channel program by sending an interrupt
signal.In the underlying txg_wait_sync function, switch the cv_wait to
a cv_wait_sig to catch the signal. Once a signal is encountered, the
dsl_sync_task function can install a Lua hook that will get called
before the Lua interpreter executes a new line of code. The
dsl_sync_task can resume with a standard txg_wait_sync call and wait
for the txg to complete. Meanwhile, the hook will abort the script and
indicate that the channel program was canceled. The kernel returns a
EINTR to indicate that the channel program run was canceled.
FreeBSD note: the return value of cv_wait_sig() has inverted meaning
between us and illumos.
Author: Don Brady <don.brady@delphix.com>
Obtained from: illumos
MFC after: 4 weeks
illumos/illumos-gate@a0b03b161ca0b03b161chttps://www.illumos.org/issues/10330
3 recent ZoL changes in the vdev and metaslab code which we can pull over:
PR 8324 c853f382db 8324 Change target size of metaslabs from 256GB to 16GB
PR 8290 b194fab0fb 8290 Factor metaslab_load_wait() in metaslab_load()
PR 8286 419ba59145 8286 Update vdev_is_spacemap_addressable() for new spacemap
encoding
Author: Serapheim Dimitropoulos <serapheimd@gmail.com>
Obtained from: illumos, ZoL
MFC after: 2 weeks
Summary:
The AmigaOne platform, encompassing the X5000 and A1222 at this time, is
based on the mpc85xx platform, but includes some things not listed in
the device tree. Some custom devices, like CPLD, could be added to the
device tree with an overlay, or other means. However, some cannot
easily be done, such as the power button interrupt.
The directory will also become a location to add AmigaOne platform drivers,
such as the aforementioned CPLD, and its children.
Reviewed by: bdragon
Differential Revision: https://reviews.freebsd.org/D21829
The comments in devmap are very ARM specific, this generalizes them for other
architectures.
Submitted by: Nicholas O'Brien <nickisobrien_gmail.com>
Reviewed by: manu, philip
Sponsored by: Axiado
Differential Revision: https://reviews.freebsd.org/D22035
From Zach:
Intel documentation indicates that backplane X550EM_X KR devices do not
support Energy Efficient Ethernet. Prior to this patch, X552 devices
(device ID 0x15AB) will crash the system when transitioning EEE state
via sysctl.
Signed-off-by: Zach Vargas <zvargas@xes-inc.com>
PR: 240320
Submitted by: Zach Vargas <zvargas@xes-inc.com>
Reviewed by: erj@
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D21673
Rescan a PCI bus when the ACPI_NOTIFY_BUS_CHECK event is posted to a
PCI bus.
Reviewed by: scottl
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D21948
Install ACPI notify handlers on PCI devices with an _EJ0 method. This
handler is invoked when devices are added or removed.
- When an ACPI_NOTIFY_DEVICE_CHECK event posts, rescan the parent bus
device. Note that strictly speaking we only need to rescan the
specified device, but BUS_RESCAN is what is available, so we rescan
the entire bus.
- When an ACPI_NOTIFY_EJECT_REQUEST event posts, detach the device
associated with the ACPI handle, invoke the _EJ0 method, and then
delete the device.
Eventually this might be changed to vector notify events to devd in
userspace where devctl can be used instead to permit more complex
actions such as graceful unmounting of filesystems.
Tested by: cperciva
Reviewed by: cperciva, imp, scottl
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21948
Ignore only ENOENT (no DTS properties found) and ENODEV (driver not
present) non-zero return values from ext_resources.
Reviewed by: manu
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22043
This fixes an error with modern ld.bfd and is inline with the changes in
r215251 and r217612.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D22031
- Use a default -march of mips64 on N64 and N32 kernels.
- Set the endianness (via MIPS_ENDIAN) and ABI (via MIPS_ABI) in
CFLAGS from MACHINE_ARCH. ARCH_FLAGS now only sets a different
-march value if needed.
- TRAMP_ARCH_FLAGS inherits MIPS_ENDIAN from MACHINE_ARCH but does
not set the ABI since XLPN32 needs an N64 ABI for the trampoline
loader. When TRAMP_ARCH_FLAGS is used it must set both -march
and -mabi.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D22030
illumos/illumos-gate@e914ace2e9e914ace2e9https://www.illumos.org/issues/10343
On the openzfs feature/porting matrix, this is listed as:
prefix to refcount funcs/types
Having these changes will make it easier to share other work across the
different ZFS operating systems.
PR 7963 424fd7c3e Prefix all refcount functions with zfs_
PR 7885 & 7932 c13060e47 Linux 4.19-rc3+ compat: Remove refcount_t compat
PR 5823 & 5842 4859fe796 Linux 4.11 compat: avoid refcount_t name conflict
Author: Tim Schumacher <timschumi@gmx.de>
Obtained from: illumos, ZoL
MFC after: 3 weeks
illumos/illumos-gate@aa02ea0194aa02ea0194
10572 Fix race in dnode_check_slots_free()
https://www.illumos.org/issues/10572
The Fix from ZoL:
Currently, dnode_check_slots_free() works by checking dn->dn_type
in the dnode to determine if the dnode is reclaimable. However,
there is a small window of time between dnode_free_sync() in the
first call to dsl_dataset_sync() and when the useraccounting code
is run when the type is set DMU_OT_NONE, but the dnode is not yet
evictable, leading to crashes. This patch adds the ability for
dnodes to track which txg they were last dirtied in and adds a
check for this before performing the reclaim.
This patch also corrects several instances when dn_dirty_link was
treated as a list_node_t when it is technically a multilist_node_t.
10579 Don't allow dnode allocation if dn_holds != 0
https://www.illumos.org/issues/10579
The fix from ZoL:
This patch simply fixes a small bug where dnode_hold_impl() could
attempt to allocate a dnode that was in the process of being freed,
but which still had active references. This patch simply adds the
required check.
Author: Tom Caputi <tcaputi@datto.com>
Reported by: delphij
MFC after: 2 weeks
X-MFC with: r353176
illumos/illumos-gate@946342a260946342a260https://www.illumos.org/issues/10452
illumos is missing a few small follow up ZoL bug fixes for the large dnode
feature. We should pull those in.
Those commits are in the ZoL tree as (newest to oldest):
PR 8435 - 75d6b7ddca - Add missing copyright
notice to large_dnode tests
PR 7433 - e14a32b1c8 - Fix object reclaim when
using large dnodes
PR 6616 - 48fbb9ddbf - Free objects when
receiving full stream as clone
PR 6695 - 39f56627ae - receive_freeobjects()
skips freeing some object
Portions contributed by: Ned Bass <bass6@llnl.gov>
Portions contributed by: Tom Caputi <tcaputi@datto.com>
Author: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Obtained from: illumos, ZoL
MFC after: 2 weeks
X-MFC with: r353176
same after the network stack was epochified. Merge the two into one function
and cleanup all uses of ifnet_byindex_locked().
While at it:
- Add branch prediction macros.
- Make sure the ifnet pointer is only deferred once,
also when code optimisation is disabled.
Sponsored by: Mellanox Technologies
This fixes the following assert when "options RATELIMIT" is used:
panic()
malloc()
sysctl_add_oid()
tcp_rl_ifnet_link()
do_link_state_change()
taskqueue_run_locked()
Sponsored by: Mellanox Technologies
callers hold it.
This simplifies pmap code and removes a dependency on the object lock.
Reviewed by: kib, markj
Tested by: pho
Sponsored by: Netflix, Intel
Differential Revision: https://reviews.freebsd.org/D21596
Atomics are used for page busy and valid state when the shared busy is
held. The details of the locking protocol and valid and dirty
synchronization are in the updated vm_page.h comments.
Reviewed by: kib, markj
Tested by: pho
Sponsored by: Netflix, Intel
Differential Revision: https://reviews.freebsd.org/D21594
busy acquires while held.
This allows code that would need to acquire and release a very large number
of page busy locks to use the old mechanism where busy is only checked and
not held. This comes at the cost of false positives but never false
negatives which the single consumer, vm_fault_soft_fast(), handles.
Reviewed by: kib
Tested by: pho
Sponsored by: Netflix, Intel
Differential Revision: https://reviews.freebsd.org/D21592
This persists busy state across operations like rename and replace.
Reviewed by: kib, markj
Tested by: pho
Sponsored by: Netflix, Intel
Differential Revision: https://reviews.freebsd.org/D21549
This is the first in a series of patches that promotes the page busy field
to a first class lock that no longer requires the object lock for
consistency.
Reviewed by: kib, markj
Tested by: pho
Sponsored by: Netflix, Intel
Differential Revision: https://reviews.freebsd.org/D21548
This adds support for H6 SoC.
Add a CCU driver for H6 that support all PLLs and most of the clocks
that we are intersted in for now (i2c, mmc, usb, etc ...)
MFC after: 1 month
You aren't supposed to changing the freq of a clock when it is
enable so disable the clock before changing the freq and then
re-enable it.
MFC after: 1 month
The former spelling probably confused MOVDIR64B with MOVDIRI64.
MOVDIR_64B is the 64-*byte* direct store instruction; MOVDIR_I64 is the
64-*bit* direct store instruction (underscores added here for clarity; they are
not part of the canonical instruction name).
No functional change.
Sponsored by: Dell EMC Isilon
vm_map_free_{left,right} rather than re-implementing them. Use the
VM_MAP_FOREACH macro where applicable. Fix some indentation.
Suggested by: kib (in a comment on D21964)
Tested by: pho (as part of D21964)
Differential Revision: https://reviews.freebsd.org/D22011
(resets, regulators, clocks) are not available.
Rely on a system initialization done by a bootloader in that cases.
This fixes operation on Terasic DE10-Pro (an Intel Stratix 10
development kit).
Sponsored by: DARPA, AFRL
