For a process supervisor using the reaper API to track process subtrees,
it is very useful to know the state of the processes on the list.
Sponsored by: https://www.patreon.com/valpackett
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D39585
Summary:
Typecasting both parts of the comparison to u_int quiets compiler
warnings about signed/unsigned comparison and takes care of positive
and negative numbers for the file descriptor in a single comparison.
Obtained from: Juniper Netwowrks, Inc.
Reviewers: mjg
Subscribers: imp
Differential Revision: https://reviews.freebsd.org/D39593
In the lua loader, if one sets a password in loader.conf, the
autoboot_delay timer will start before the menu is displayed. One can
interrupt the autoboot and bring up the menu by entering a keyboard
character before the timer expires.
If this is done a prompt for the password is displayed. Entering the
password will bring up the menu, but the timer will again start and
another keyboard character must be entered or autoboot will abort the
menu and boot the system.
PR: 265472
Reviewed by: kevans
MFC after: 3 days
Usually the kernel is loaded later, but there are circumstances where it
could have been loaded earlier than changing BEs. Unload anything that
is already there so that we know we're using artifacts from the proper
environment.
PR: 265471
Reviewed by: kevans
MFC after: 3 days
ccb_h.status has two parts: the actual status and some addition bits to
indicate additional information. It must be masked before comparing
against completion codes. Add new inline function cam_ccb_success to
simplify this to test whether or not the request succeeded. Most of the
code already does this, but a few places don't (the rest likely should
be converted to use cam_ccb_status and/or cam_ccb_success, but that's
for another day). This caused at least one bug in recognizing devices
behind a SATA port multiplexer, though some of these checks were
fine with the special knowledge of the code paths involved.
PR: 270459
Sponsored by: Netflix
MFC After: 1 week (and maybe a EN requst)
Reviewed by: ken, mav
Differential Revision: https://reviews.freebsd.org/D39572
There is one data corruption problem reported and fixed upstream, not
cherry-picked here yet.
On top of it the following fires under load:
VERIFY(zil_replaying(zfsvfs->z_log, tx));
The patch which introduced the entire machinery is a revert candidate,
but as the machinery came with a dedicated feature flag, doing so would
render affected pools read-only at best. To be figured out.
As a temporary bandaid at least stop the active usage.
Note this patch does not make the feature disappear from zpool upgrade.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Add the remaining bus_space*read*_8 functions conditionally for
only arm64 in order to not break KASAN builds with new code using
one of them.
Suggested by: markj
Reviewed by: markj
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D39581
When vm_map_remove() is called from vm_swapout_map_deactivate_pages()
due to swapout, PKRU attributes for the removed range must be kept
intact. Provide a variant of pmap_remove(), pmap_map_delete(), to
allow pmap to distinguish between real removes of the UVA mappings
and any other internal removes, e.g. swapout.
For non-amd64, pmap_map_delete() is stubbed by define to pmap_remove().
Reported by: andrew
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D39556
RLIMIT_CPU applies to CPU time, not real (wall-clock) time.
This test failed in AWS, where the real time was 5-7 seconds.
Sum the user and system CPU time used, and validate that.
While I'm here, don't bother specifying -s exit:0 or -e empty,
since those are checked by default.
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Its possible to induce a crash in either rack or bbr. This would be done
if the rack stack were say the default and bbr was being used by a connection.
If the bbr stack is then unloaded and it was active, we will trigger a MPASS assert
in tcp_hpts since the new stack (default rack) would start a timer, and the old stack
(bbr) would have the inp already in hpts.
Reviewed by: tuexen
Sponsored by: Netflix Inc
Differential Revision:https://reviews.freebsd.org/D39576
Current Netlink message writer code relies on executing callbacks
with arbitrary data (pointer or integer) to flush the completed
messages.
This arbitrary data is stored as a union of { void *, uint64_t }.
At some stage, the message flushing code copied this data, using
direct uint64_t assignment instead of copying the union. It lead
to failure on CHERI, as sizeof(pointer) == 16 there.
Fix the code by making union non-anonymous and copying it entirely.
Reviewed by: br, jhb, jrtc27
Differential Revision: https://reviews.freebsd.org/D39557
MFC after: 2 weeks
This changes intends to reduce the bar to the kernel unit-testing by
introducing a new kernel-testing framework ("ktest") based on Netlink,
loadable test modules and python test suite integration.
This framework provides the following features:
* Integration to the FreeBSD test suite
* Automatic test discovery
* Automatic test module loading
* Minimal boiler-plate code in both kernel and userland
* Passing any metadata to the test
* Convenient environment pre-setup using python testing framework
* Streaming messages from the kernel to the userland
* Running tests in the dedicated taskqueues
* Skipping or parametrizing tests
Differential Revision: https://reviews.freebsd.org/D39385
MFC after: 2 weeks
RX MCS set defines which MCSs are supported for RX, bits 0-31 are for equal
modulation of the streams, bits 33-76 are for unequal case. Current code checks
txstreams variable instead of rxstreams to set bits from 53 to 76 for 4 spatial
streams case.
The modulations are defined in tables 19-38 and 19-41 of the IEEE Std
802.11-2020.
Spotted by bz in https://reviews.freebsd.org/D39476
Reviewed by: bz
Approved by: bz
Sponsored by: Serenity Cybersecurity, LLC
Differential Revision: https://reviews.freebsd.org/D39568
Current code checks whether or not txstreams are equal to rxstreams and if it
isn't - sets needed bits in "Transmit MCS Set". But if they are equal it sets
whole set to zero, which contradicts the standard, if tx and rx streams are
equal 'Tx MCS Set Defined' (table 9-186, IEEE Std 802.11-2020) must be set to
one.
Reviewed by: bz
Approved by: bz
Sponsored by: Serenity Cybersecurity, LLC
Differential Revision: https://reviews.freebsd.org/D39476
The xen_domain_type and HYPERVISOR_shared_info variables are shared by
all Xen architectures, so they should be in common rather than
reimplemented by each architecture.
hvm_start_flags is used by xen_initial_domain() and so needs to be in
common.
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D28982
The event channel source code or equivalent is needed on all
architectures. Since much of this is viable to share, get this moved out
of x86-land. Each interrupt interface then needs a distinct back-end
implementation.
Reviewed by: royger
Submitted by: Elliott Mitchell <ehem+freebsd@m5p.com>
Original implementation: Julien Grall <julien@xen.org>, 2014-01-13 17:41:04
Differential Revision: https://reviews.freebsd.org/D30236
Simply moving the interrupt allocation and release functions into files
which belong to the architecture. Since x86 interrupt handling is quite
distinct from other architectures, this is a crucial necessary step.
Identifying the border between x86 and architecture-independent is
actually quite tricky. Similarly, getting the prototypes for the
border right is also quite tricky.
Inspired by the work of Julien Grall <julien@xen.org>,
2015-10-20 09:14:56, but heavily adjusted.
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D30936
The x86 PIC interface is very much x86-specific and not used by other
architectures. Since most of xen_intr.c can be shared with other
architectures, the PIC interface needs to be broken off.
Introduce wrappers for calls into the architecture-dependent interrupt
layer. All architectures need roughly the same functionality, but the
interface is slightly different between architectures. Due to the
wrappers being so thin, all of them are implemented as inline in
arch-intr.h.
The original implementation was done by Julien Grall in 2015, but this
has required major updating.
Removal of PVHv1 meant substantial portions disappeared. The original
implementation took care of moving interrupt allocation to
xen_arch_intr.c, but this has required massive rework and was broken
off.
In the original implementation the wrappers were normal functions. Some
had empty stubs in xen_intr.c and were removed.
Reviewed by: royger
Submitted by: Elliott Mitchell <ehem+freebsd@m5p.com>
Original implementation: Julien Grall <julien@xen.org>, 2015-10-20 09:14:56
Differential Revision: https://reviews.freebsd.org/D30909
This value doesn't need to be set in xen_intr_alloc_isrc(). What is
needed is simply to ensure the allocated xenisrc won't appear as free,
even if xi_type is written non-atomically. Since the type is no longer
used to indicate free or not, the calling function should take care of
all non-architecture initialization.
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D31188
Scanning the list of interrupts to find an unused entry is rather
inefficient. Instead overlay a free list structure and use a list
instead.
This also has the useful effect of removing the last use of evtchn_type
values outside of xen_intr.c.
Reviewed by: royger
[royger]
- Make avail_list static.
The evtchn_type enum is only touched by the Xen interrupt code. Other
event channel uses no longer need the value, so that has been moved to
restrict its use.
Copyright note. The current evtchn_type was introduced at 76acc41fb7
by Justin T. Gibbs. This in turn appears to have been heavily inspired
by 30d1eefe39 done by Kip Macy.
Reviewed by: royger
Move the xenisrc structure which needs to be shared between the core Xen
interrupt code and architecture-dependent code into a separate header. A
similar situation exists for the NR_EVENT_CHANNELS constant.
Turn xi_intsrc into a type definition named xi_arch to reflect the new
purpose of being an architectural variable for the interrupt source.
This was originally implemented by Julien Grall, but has been heavily
modified. The core side was renamed "intr-internal.h" and is #include'd
by "arch-intr.h" instead of the other way around. This allows the
architecture to add function definitions which use struct xenisrc.
The original version only moved xi_intsrc into xen_arch_isrc_t. Moving
xi_vector was done by the submitter.
The submitter had also moved xi_activehi and xi_edgetrigger into
xen_arch_isrc_t. Those disappeared with the removal of PVHv1 support.
Copyright note. The current xenisrc structure was introduced at
76acc41fb7 by Justin T. Gibbs. Traces remain, but the strength of
Copyright claims from before 2013 seem pretty weak.
Reviewed by: royger
Submitted by: Elliott Mitchell <ehem+freebsd@m5p.com>, 2021-03-17 19:09:01
Original implementation: Julien Grall <julien@xen.org>, 2015-10-20 09:14:56
Differential Revision: https://reviews.freebsd.org/D30648
[royger]
- Adjust some line lengths
- Fix comment about NR_EVENT_CHANNELS after movement.
- Use #include instead of symlinks.
xen_intr_handle_upcall() has two interfaces. It needs to be called by
the x86 assembly code invoked by the APIC. Second, it needs to be called
as a driver_filter_t for the XenPCI code and for architectures besides
x86.
Unfortunately the driver_filter_t interface was implemented as a wrapper
around the x86-APIC interface. Now create a simple wrapper for the
x86-APIC code, which calls an architecture-independent
xen_intr_handle_upcall().
When called via intr_event_handle(), driver_filter_t functions expect
preemption to be disabled. This removes the need for
critical_enter()/critical_exit() when called this way.
The lapic_eoi() call is only needed on x86 in some cases when invoked
directly as an APIC vector handler.
Additionally driver_filter_t functions have no need to handle interrupt
counters. The intrcnt_add() calling function was reworked to match the
current situation. intrcnt_add() is now only called via one path.
The increment/decrement of curthread->td_intr_nesting_level had
previously been left out. Appears this was mostly harmless, but this
was noticed during implementation and has been added.
CONFIG_X86 is a leftover from use with Linux. While the barrier isn't
needed for FreeBSD on x86, it will be needed for FreeBSD on other
architectures.
Copyright note. xen_intr_intrcnt_add() was introduced at 76acc41fb7
by Justin T. Gibbs. xen_intrcnt_init() was introduced at fd036deac1
by John Baldwin.
sys/x86/xen/xen_arch_intr.c was originally created by Julien Grall in
2015 for the purpose of holding the x86 interrupt interface. Later it
was found xen_intr_handle_upcall() was better earlier, and the x86
interrupt interface better later. As such the filename and header list
belong to Julien Grall, but what those were created for is later.
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D30006
Keeping released xenisrcs in a known state simplifies allocation, but
forces the allocation function to maintain that state. This turns into
a problem when trying to allow for interchangeable allocation functions.
Fix this issue by ensuring xenisrcs are always *fully* initialized
during binding.
Reviewed by: royger
There are actually several distinct locking domains in xen_intr.c, but
all were sharing the same lock. Both xen_intr_port_to_isrc[] and the
x86 interrupt structures needed protection. Split these two apart as a
precursor to splitting the architecture portions off the file.
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D30726
Locking for allocation was being done in xen_intr_bind_isrc(), but the
unlock was inside xen_intr_alloc_isrc(). While the lock acquisition at
the end of xen_intr_alloc_isrc() was to modify xen_intr_port_to_isrc[],
NOT allocation. Fix this garbled (though working) locking scheme.
Now locking for allocation is strictly in xen_intr_alloc_isrc(), while
locking to modify xen_intr_port_to_isrc[] is in xen_intr_bind_isrc().
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D30726
The call structure around xen_intr_alloc_isrc() was rather awful.
Notably finding a structure for reuse is part of allocation, but this
was done outside xen_intr_alloc_isrc(). Move this into
xen_intr_alloc_isrc() so the function handles all allocation steps.
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D30726
As "CPUs", IRQs (vector) and virtual IRQs are always positive integers,
adjust the Xen code to use unsigned integers. Several format strings
need adjustment to match. Additionally single-bit bitfields are
boolean.
No functional change expected.
Reviewed by: royger
This overlaps the purpose of __XEN_INTERFACE_VERSION__. Remove Xen 3.0.2
compatibility. __XEN_INTERFACE_VERSION__ has compatibility to Xen 3.2.8
enabled. As Xen 3.3 was released almost 15 years ago, it seems unlikely
anyone hasn't updated.
Reviewed by: royger
HYPERVISOR_poll(), HYPERVISOR_block(), and HYPERVISOR_crash() appear no
longer used. Further get_system_time() appears to have disappeared at
some point in the past, so HYPERVISOR_poll() was broken anyway.
No functional change intended.
Reviewed by: royger
The present implementation is only for x86. Other architectures need
adjustments for querying presence of EFI.
Xen's EFI support is also quite troublesome on non-x86. This is being
slowly remedied, but until in better shape the EFI clock functionality
should be disabled.
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D31065
Part of the series for allowing FreeBSD/ARM to run on Xen. On ARM the
function is a trivial pass-through, other architectures need distinct
implementations.
While implementing XEN_VCPUID() as a call to XEN_CPUID_TO_VCPUID()
works, that involves multiple accesses to the PCPU region. As such make
this a distinct macro. Only callers in machine independent code have
been switched.
Add a wrapper for the x86 PIC interface to use matching the old
prototype.
Partially inspired by the work of Julien Grall <julien@xen.org>,
2015-08-01 09:45:06, but XEN_VCPUID() was redone by Elliott Mitchell on
2022-06-13 12:51:57.
Reviewed by: royger
Submitted by: Elliott Mitchell <ehem+freebsd@m5p.com>
Original implementation: Julien Grall <julien@xen.org>, 2014-04-19 08:57:40
Original implementation: Julien Grall <julien@xen.org>, 2014-04-19 14:32:01
Differential Revision: https://reviews.freebsd.org/D29404
Previously the upper layer handle was being set before the last
potential error condition. The reasoning appears to have been it was
assumed invalid in case of an error being returned. Now ensure it is
invalid until just before a successful return.
Fixes: 76acc41fb7 ("Implement vector callback for PVHVM and unify event channel implementations")
Fixes: 6d54cab1fe ("xen: allow to register event channels without handlers")
Reviewed by: royger
n further non-LRO testing I found a case where rack is supposed to be waking up but
it is not now. In this special case it sets the flag rc_ack_can_sendout_data. When that is
set we should not prohibit output.
Reviewed by: tuexen
Sponsored by: Netflix Inc
Differential Revision:https://reviews.freebsd.org/D39565
The bridge treated no vlan tag as being equivalent to vlan ID 1, which
causes confusion if the bridge sees both untagged and vlan 1 tagged
traffic.
Use DOT1Q_VID_NULL when there's no tag, and fix up the lookup code by
using 'DOT1Q_VID_RSVD_IMPL' to mean 'any vlan', rather than vlan 0. Note
that we have to account for userspace expecting to use 0 as meaning 'any
vlan'.
PR: 270559
Suggested by: Zhenlei Huang <zlei@FreeBSD.org>
Reviewed by: philip, zlei
Differential Revision: https://reviews.freebsd.org/D39478
It is shorter and more readable.
No functional change intended.
Reviewed by: kp
Fixes: 2d3614fb13 bridge: Log MAC address port flapping
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D39542
The output of hexadecimal bytes are in lowercase. Update the example to
reflect the reality.
Reviewed by: gbe (manpages)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D39543