as taking a register number, and that would get multiplied by 4 to make
a register address. But the header file that consumers have to reference
this stuff publishes register addresses, not numbers. So now everything
works in terms of register addresses.
Note that the HDMI init code was writing into the wrong register before
this change. Apparently whatever it wrote to was harmless, and apparently
HDMI was working because uboot had set up the right bits.
and arm64 so move any truncation to the caller.
Submitted by: Mihai Carabas <mihai.carabas@gmail.com>
X-Differential Revision: https://reviews.freebsd.org/D10213
Use them in some existing code that is vulnerable to roundoff errors.
The existing constant SBT_1NS is a honeypot, luring unsuspecting folks into
writing code such as long_timeout_ns*SBT_1NS to generate the argument for a
sleep call. The actual value of 1ns in sbt units is ~4.3, leading to a
large roundoff error giving a shorter sleep than expected when multiplying
by the trucated value of 4 in SBT_1NS. (The evil honeypot aspect becomes
clear after you waste a whole day figuring out why your sleeps return early.)
pmap_remap_vm_attr() function requires indexes to
pte2_attr_tab as the arguments (VM_MEMATTR_).
Mistakenly, instead of them, actual values from the
table were used (PTE2_ATTR_), when applying
work-around for Marvell Armada 38x SoCs.
Submitted by: Marcin Wojtas (mw@semihalf.com)
Reported by: Rafal Kozik (rk@semihalf.com)
Reviewed by: cognet (mentor)
Approved by: cognet (mentor)
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D11704
The TEX index is selected using (TEX0 C B) bits
from the L2 descriptor. Use correct index by masking
and shifting those bits accordingly.
Differential Revision: https://reviews.freebsd.org/D11703
If we cannot get a phy, do not detach the driver, some boards have phy
always enabled and not exposed.
While here do not release the clocks if we fails as we release them
in a10_ehci_detach.
Tested-on: OrangePi-One
It turns out that this is more than a power optization. The OTG port
won't work on boards that have this property unless this setting is honored.
Also ensure that the usb phy device attaches before ehci.
This allows multiple instances of SoCs that use the pl310 driver to be
built within the same kernel:
* Add access to the platform_t object from outside platform.c
* Use this with the pl310 driver
There is a new platform_pl310 interface to replace the existing code. SoCs
need to implement the init method, and if they have special requirements to
write to the two registers we care about will also need to implement the
write_ctrl and write_debug methods.
Differential Revision: https://reviews.freebsd.org/D11546
Implement the MMC/SD/SDIO protocol within a CAM framework. CAM's
flexible queueing will make it easier to write non-storage drivers
than the legacy stack. SDIO drivers from both the kernel and as
userland daemons are possible, though much of that functionality will
come later.
Some of the CAM integration isn't complete (there are sleeps in the
device probe state machine, for example), but those minor issues can
be improved in-tree more easily than out of tree and shouldn't gate
progress on other fronts. Appologies to reviews if specific items
have been overlooked.
Submitted by: Ilya Bakulin
Reviewed by: emaste, imp, mav, adrian, ian
Differential Review: https://reviews.freebsd.org/D4761
merge with first commit, various compile hacks.
This driver is standard rather than optional because it can always provide
time after a reboot, but it will only provide time after a power cycle if
battery power is supplied to the chip's SNVS power domain.
Upstream DTS for A64 SoC doesn't provide a /clocks node as Linux switched
to ccu-ng
This commit adds the necessary bits to boot on pine64 with latest DTS from
upstream.
USB is not working for now and some node aren't present in the DTS (like the
PMU, Power Management Unit).
Tested on: Pine64
--Remove special-case handling of sparc64 bus_dmamap* functions.
Replace with a more generic mechanism that allows MD busdma
implementations to generate inline mapping functions by
defining WANT_INLINE_DMAMAP in <machine/bus_dma.h>. This
is currently useful for sparc64, x86, and arm64, which all
implement non-load dmamap operations as simple wrappers
around map objects which may be bus- or device-specific.
--Remove NULL-checked bus_dmamap macros. Implement the
equivalent NULL checks in the inlined x86 implementation.
For non-x86 platforms, these checks are a minor pessimization
as those platforms do not currently allow NULL maps. NULL
maps were originally allowed on arm64, which appears to have
been the motivation behind adding arm[64]-specific barriers
to bus_dma.h, but that support was removed in r299463.
--Simplify the internal interface used by the bus_dmamap_load*
variants and move it to bus_dma_internal.h
--Fix some drivers that directly include sys/bus_dma.h
despite the recommendations of bus_dma(9)
Reviewed by: kib (previous revision), marius
Differential Revision: https://reviews.freebsd.org/D10729
When a pin is set for input the value in the DR will be the same as the PSR.
When a pin is set for output the value in the DR is the value output to the
pad, and the value in the PSR is the actual electrical level sensed on the
pad, and they can be different if the pad is configured for open-drain mode
and some other entity on the board is driving the line low.
H2+ SoC is a stripped down version of H3 without gigabit ethernet and 4K HDMI.
Also add sun8i-h2-plus-orangepi-zero.dts to the build as we run on this board.
Armada 38x SoCs, in order to work properly in IO-coherent mode,
requires an update of the MBUS windows attributesd.
This patch also configures nexus coherent dma tag, because all
busses and children devices have to inherit this setting in runtime.
The latter has to be executed as a sysinit (SI_SUB_DRIVERS type),
so that bus_dma_tag_create() can be executed properly.
Submitted by: Michal Mazur <mkm@semihalf.com>
Marcin Wojtas <mw@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Reviewed by: ian
Differential revision: https://reviews.freebsd.org/D11203
Allow to set the dma tag for nexus in the platform init code,
so that all busses and devices would be able to inherit it.
This change is useful e.g. for setting coherent dma tag for
the platforms with hardware IO cache coherency.
Submitted by: ian
Michal Mazur <mkm@semihalf.com>
Reviewed by: ian
Differential revision: https://reviews.freebsd.org/D11202
- Inherit BUS_DMA_COHERENT flag from parent buses
- Use cacheable memory attributes on dma coherent platform
- Disable cache synchronization on coherent platform
Changes are based on ARMv8 busdma code and commit r299683.
Submitted by: Michal Mazur <mkm@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Reviewed by: ian
Differential revision: https://reviews.freebsd.org/D11201
When a PL310 cache is used on a system that provides hardware
coherency, the outer cache sync operation is useless, and can be
skipped. Moreover, on some systems, it is harmful as it causes
deadlocks between the Marvell coherency mechanism, the Marvell PCIe
or Crypto controllers and the Cortex-A9.
To avoid this, this commit introduces a new Device Tree property
'arm,io-coherent' for the L2 cache controller node, valid only for the
PL310 cache. It identifies the usage of the PL310 cache in an I/O
coherent configuration. Internally, it makes the driver disable the
outer cache sync operation.
Note, that other outer-cache operations are not removed, as they may
be needed for certain situations, such as booting secondary CPUs.
Moreover, in order to enable IO coherent operation, the decision
whether to use L2 cache maintenance callbacks is done in busdma
layer, which was enabled in one of the previous commits.
Submitted by: Michal Mazur <mkm@semihalf.com>
Marcin Wojtas <mw@semihalf.com>
Reviewed by: mmel
Obtained from: Semihalf
Differential revision: https://reviews.freebsd.org/D11245
There is a hardware problem between Cortex-A9 CPUs and on-chip devices
in Armada 38X SoCs that may cause hang on heavy load. This can be
however worked around by mapping all registers and PCI IO
as strongly ordered instead of device memory.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Reviewed by: mmel
Tested by: mw_semihalf.com
Obtained from: Semihalf
Differential revision: https://reviews.freebsd.org/D10218
Starting with DTS from Linux 4.11, the pins list, function, drive and pull
are no longer prefixed with "allwinner,".
Allow the pinctrl driver to handle both case.
load and unload it all the time since the buffer never changes. In
addition, we were loading it with a hardware spin lock held, which
makes the sleepable lock in busdma (for the bounce pages) trigger a
witness warning, as well as ipend being called with it held by uart,
which made it impossible to unload.
These differences don't matter with the v4 busdma implementation, but
they do with the v6 implementation since the latter likes to bounce
transactions more, and will always do so for Atmel's driver.
It's more efficient as well as being more correct.
timecounter instead of the GPT timer, freeing up the more flexible GPT
hardware for other uses. The EPIT driver is a standard (always in the
kernel) driver, and the existing GPT driver is now optional and included
only if you ask for device imx_gpt.
global timer was successful, since the implementation tries to read it.
Notably, if the platform has a variable-frequency global timer (because
of dynamic frequency scaling), it doesn't set up the global timer for use
as a system timecounter, and in that case it also can't use it for DELAY.
Such platforms use different timer hardware for both timecounter and DELAY.
The arm kernel linker scripts place the .init_pagetable section in .bss,
but .init_pagetable had no section flags set, and so did not match the
expected flags for .bss.
GNU ld silently ignores this case, but lld reports an error:
ld: error: incompatible section flags for .bss
>>> locore.o:(.init_pagetable): 0x0
>>> output section .bss: 0x3
PR: 220055
Submitted by: mmel, Rafael Espíndola
MFC after: 3 weeks
Sponsored by: The FreeBSD Foundation
Currently some ARM platforms implement their own platform_probe_and_attach()
function and other use common routine that calls platform's PLATFORM_ATTACH
method.
Keep the old description to match the preferred way of naming things.
Pointed out by: andrew
