space. Where the vm_map tree now has null pointers, store pointers to
next and previous entries in right and left fields, making the binary
tree threaded. Have the predecessor and successor functions compute
what the prev and next fields previously stored.
Reviewed by: markj, kib (previous version)
Tested by: pho (previous version)
Differential Revision: https://reviews.freebsd.org/D21964
In some cases, like is locked bootstrap or device's inability to boot from
removable media, we cannot use standard boot sequence and is necessary to
boot kernel directly from U-Boot.
Discussed with: jhibbits
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D13861
Summary:
This matches r351198 from amd64. This only applies to AIM64 and Book-E.
On AIM64 it short-circuits with one domain, to behave similar to
existing. Otherwise it will allocate 16MB huge pages to hold the page
array, across all NUMA domains. On the first domain it will shift the
page array base up, to "upper-align" the page array in that domain, so
as to reduce the number of pages from the next domain appearing in this
domain. After the first domain, subsequent domains will be allocated in
full 16MB pages, until the final domain, which can be short. This means
some inner domains may have pages accounted in earlier domains.
On Book-E the page array is setup at MMU bootstrap time so that it's
always mapped in TLB1, on both 32-bit and 64-bit. This reduces the TLB0
overhead for touching the vm_page_array, which reduces up to one TLB
miss per array access.
Since page_range (vm_page_startup()) is no longer used on Book-E but is on
32-bit AIM, mark the variable as potentially unused, rather than using a
nasty #if defined() list.
Reviewed by: luporl
Differential Revision: https://reviews.freebsd.org/D21449
Since r355472 added code which clears the XATTRSUPPORT bit for non-NFSv4.2
mounts, it is now safe to set it.
There will be a series of these preliminary commits that will prepare for
a major commit of the NFSv4.2 client/server changes currently found in
subversion under projects/nfsv42/sys.
This commit completes updates to nfsproto.h required by the NFSv4.2.
hardclock IPI is delivered.
In the current code after r355311, critical section is taken only
around hardclockintr() call, and sched_preempt() is called after the
section is exited. If we reschedule after exit, as we typically would
due to conditions that caused IPI, in ULE the runq tdq_ipipending is
not cleared, which blocks generation of further preempt IPIs.
Since all relatively modern (10 years) hardware has per-cpu event
timers, restoring the critical section conditionally does not affect
it.
Reported and tested by: cy
Diagnosed and reviewed by: jeff (previous version)
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D22716
... after the initial common TSS is copied into its final location
during PCPU reallocation.
Reported by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Use the power of variable to avoid spelling out source and generated
files too many times. The previous Makefiles were hard to read, hard to
edit, and badly formatted.
Reviewed by: kevans, emaste
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22714
This patch adds code to macros to clear attribute bits not supported
by NFSv4.2. For now, these bits are never set anyhow, but this prepares
the code for the addition of NFSv4.2 support in a future commit.
There will be a series of these preliminary commits that will prepare for
a major commit of the NFSv4.2 client/server changes currently found in
subversion under projects/nfsv42/sys.
We were not adding CAP_EVENT to input file capabilities, so kevent()
always failed with ENOTCAPABLE. tail implements a fallback mode to
poll the file in this case, so the failure was not apparent.
Reviewed by: emaste
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22709
Suppose that the map entry is wired, so that we later assign
fault_type = entry->protection. Suppose further that we jump back to
RetryLookup. Then fault_type will no longer contain the original
fault protection mask, but instead that of the wired entry.
Submitted by: Wuyang Chung <wuyang.chung1@gmail.com>
Reviewed by: kib
MFC after: 3 days
Github PR: https://github.com/freebsd/freebsd/pull/419
Differential Revision: https://reviews.freebsd.org/D22683
The current version will strip out #include directives appearing inside strings, which is clearly wrong. Improve the processing entirely in the following ways:
- Strip only whole-line comments on every single iteration
- Abort if we see a malformed line that doesn't match the key=value format
- For quoted (backtick or double quote) strings, we'll advance to the end of
the key=value pair and make sure there's not extra stuff left over
- For unquoted key=value pairs, we'll strip any trailing comments and verify
there's no internal whitespace
This has revealed the caveat that key/value pairs can't even include escaped quotes (and haven't been able to). I don't know if this is actually problematic, as we're usually looking at cases like "#include <foo>" or raw identifiers.The current version will strip out #include directives appearing inside strings, which is clearly wrong. Improve the processing entirely in the following ways:
Reviewed and noticed by: brooks
Differential Revision: https://reviews.freebsd.org/D22698
of gpio devices by using kenv to add hints for a new device and then do
'devctl rescan gpiobus4' to make the new device(s) attach.
It's not particularly easy to detect whether the 'at' hint has been deleted
for a child device that's currently attached, so this doesn't handle that.
But the user can use devctl commands to manually detach an existing device.
Don't needlessly pass around qpair pointers when the tracker knows what
qpair it's on. This will simplify code and make it easier to split
submission and completion queues in the future.
Signed-off-by: John Meneghini <johnm@netapp.com>
Uses two GPIO pins as MDC (clock) and MDIO (bidirectional I/O), relies
on mii_bitbang.
Tested on SG-3200 where the PHY for one of the ports is wired independently
of the SoC MDIO bus.
Sponsored by: Rubicon Communications, LLC (Netgate)
While here, call device_delete_children() to detach and dealloc all the
existent children and handle the child's detach errors properly.
Reported by: jenkins, hselasky, ian
Sponsored by: Rubicon Communications, LLC (Netgate)
This is the half of the changes required that work as-is with both in-tree
ZFS and the new hotness, sysutils/openzfs. Highlights are less dependency
on header pollution (from somewhere) and using 'mnttab' instead of
'extmnttab'. In the in-tree ZFS, the latter is a #define for the former,
but in the port extmnttab is actually a distinct struct that's a super-set
of mnttab. We really want mnttab here anyways, so just use it.
This constant was used to reserve space at the top of the stack to
hold translated system call arguments for non-default ABIs (the
"stackgap"). However, none of the compatibility ABIs have used the
stackgap in many years and the last use of SPARE_USRSPACE was removed
in r355373.
Reviewed by: kib
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D22697
Update the comment related to SIIT and v4mapped addresses being rejected
by us when coming from the wire given we have supported IPv6-only kernels
for a few years now.
See also draft-itojun-v6ops-v4mapped-harmful.
Suggested by: melifaro
MFC after: 2 weeks
pp->private just can not be NULL in those places.
In g_disk_start() and g_disk_ioctl() both dp != NULL and !dp->d_destroyed
should always be true if disk_gone() and disk_destroy() are used properly,
since GEOM does not send requests to errored providers. If the protocol is
not followed, then no amount of additional checks here give real safety.
In g_disk_access() though the checks are useful, since GEOM blocks only
new opens for errored providers, but allows closes. It should not happen
if disk_gone() and disk_destroy() are used properly, but may otherwise.
To improve cases when disk_gone() is not used, call it from disk_destroy().
It does not give full guaranties, but it errors the provider and makes
GEOM block unwanted requests at least after some race.
MFC after: 2 weeks
In ip6_input() we apply the same v4mapped address check twice. The only
case which skipps the first one is M_FASTFWD_OURS which should have passed
the check on the firstinput pass and passed the firewall.
Remove the 2nd redundant check.
Reviewed by: kp, melifaro
MFC after: 2 weeks
Sponsored by: Netflix (originally)
Differential Revision: https://reviews.freebsd.org/D22462
Change the remaining caddr_t usages to char * following the removal
of the KAME macros
No functional change.
Requested by: glebius
Reviewed by: glebius
MFC after: 2 weeks
Sponsored by: Netflix (originally)
Differential Revision: https://reviews.freebsd.org/D22399
Two changes to EPOCH_TRACE:
(1) add a sysctl to surpress the backtrace from epoch_trace_report().
Sometimes the log line for the recursion is enough and the
backtrace massively spams the console.
(2) In order to be able to go without the backtrace do not only
print where the previous occurance happened, but also where
the current one happens. That way we have file:line information
for both and can look at them without the need for getting line
numbers from backtrace and a debugging tool.
Reviewed by: glebius
Sponsored by: Netflix (originally)
Differential Revision: https://reviews.freebsd.org/D22641
ConnectX-6 DX.
Currently TLS v1.2 and v1.3 with AES 128/256 crypto over TCP/IP (v4
and v6) is supported.
A per PCI device UMA zone is used to manage the memory of the send
tags. To optimize performance some crypto contexts may be cached by
the UMA zone, until the UMA zone finishes the memory of the given send
tag.
An asynchronous task is used manage setup of the send tags towards the
firmware. Most importantly setting the AES 128/256 bit pre-shared keys
for the crypto context.
Updating the state of the AES crypto engine and encrypting data, is
all done in the fast path. Each send tag tracks the TCP sequence
number in order to detect non-contiguous blocks of data, which may
require a dump of prior unencrypted data, to restore the crypto state
prior to wire transmission.
Statistics counters have been added to count the amount of TLS data
transmitted in total, and the amount of TLS data which has been dumped
prior to transmission. When non-contiguous TCP sequence numbers are
detected, the software needs to dump the beginning of the current TLS
record up until the point of retransmission. All TLS counters utilize
the counter(9) API.
In order to enable hardware TLS offload the following sysctls must be set:
kern.ipc.mb_use_ext_pgs=1
kern.ipc.tls.ifnet.permitted=1
kern.ipc.tls.enable=1
Sponsored by: Mellanox Technologies
Interrupt based driver, implements SPI mode and clock configuration.
Tested on espressobin and SG-3200.
Sponsored by: Rubicon Communications, LLC (Netgate)
and remove a couple scattered local declarations.
Most of these aren't referenced in C code (there are some references in
asm code), and they also aren't documented anywhere. This helps a bit
with the latter.
For normal I/Os consumer and provider statuses are checked by g_io_check().
But ioctl calls often do not go through it, being dispatched directly. This
change makes their semantics more alike, protecting lower levels.
MFC after: 2 weeks
They're in both the old and new places in HEAD for the moment for
discussion and transition. The old locations will be garbage collected
in 4 weeks. MFCs to 12 an 11 will keep the old and new for transition
purposes.
Reviewed by: kib
MFC after: 4 weeks
Sponsored by: Intel
Differential Revision: https://reviews.freebsd.org/D22590
This is a preliminary commit of NFSv4.2 definitions that will be used by
subsequent commits which adds NFSv4.2 support to the NFS client and server.
There will be a series of these preliminary commits that will prepare for
a major commit of the NFSv4.2 client/server changes currently found in
subversion under projects/nfsv42/sys.
Add ATF tests for most gmultipath operations. Add some dtrace probes too,
primarily for configuration changes that happen in response to provider
errors.
PR: 178473
MFC after: 2 weeks
Sponsored by: Axcient
Differential Revision: https://reviews.freebsd.org/D22235
The SES4r3 standard requires that element descriptors may only contain ASCII
characters in the range 0x20 to 0x7e. Some SuperMicro expanders violate
that rule. This patch adds a sanity check to ses(4). Descriptors in
violation will be replaced by "<invalid>".
This patch fixes "sesutil --libxo xml" on such systems. Previously it would
generate non-well-formed XML output.
PR: 241929
Reviewed by: allanjude
MFC after: 2 weeks
Sponsored by: Axcient
When the linker doesn't have this feature, add -mno-relax to CFLAGS
on RISC-V.
Define the feature for ld.bfd, but not lld. If lld gains relaxation
support in a newer version, we can enable it for those versions of lld
in bsd.linker.mk.
Reviewed by: mhorne
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D22659
preempted after an "ic" or "tlbi" instruction but before it performed a
"dsb" instruction. The "ic" and "tlbi" instructions have unusual
synchronization requirements. If the old thread migrates to a new
processor, its completion of a "dsb" instruction on that new processor does
not guarantee that the "ic" or "tlbi" instructions performed on the old
processor have completed.
This issue is not restricted to the kernel. Since locore.S sets the UCI bit
in SCTLR, user-space programs can perform "ic ivau" instructions (as well as
some forms of the "dc" instruction).
Reviewed by: andrew, kib, markj, mmel
X-MFC with: r355145
Differential Revision: https://reviews.freebsd.org/D22622
Coverity points out that we've already dereferenced m by the time we check, so
there's no reason to keep the check. Moreover, it's safe to pass NULL to
m_freem() anyway.
CID: 1019092
The recent rpi-firmware update renamed "0" to "zero" in the RPi0 DTB
filename
It also included the components needed to boot the RPi4, so install those
now -- interested parties can install sysutils/u-boot-rpi4 and copy
config_rpi4.txt to config.txt on the FAT partition in order to boot the
board. Do note that we currently don't support ethernet/usb/pci.
Reviewed by: manu
MFC after: 3 days
While the interaction between this and the ETCSYMLINK option of
security/ca_root_nss isn't necessarily fatal, one should be aware and
attempt to understand the ramifications of mixing the two.
ports-secteam will be contacted to discuss the default option for branches
where certs are being included in base.
