Use it wherever COMPAT_FREEBSD11 is currently specified, like r309749.
Reviewed by: imp, jhb, markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D20120
Some UEFI implementations trash this register and, as we use it as a
platform register, the kernel doesn't save it before calling into the UEFI
runtime services. As we have a copy in tpidr_el1 restore from there when
exiting the EFI environment.
PR: 237234, 237055
Reviewed by: manu
Tested On: Ampere eMAG
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Sponsored by: Ampere Computing (hardware)
Differential Revision: https://reviews.freebsd.org/D20127
After latest binding update, this patch enables usage of
the switch on Armada 3720 EspressoBin, so compile it
by default with arm64 GENERIC.
A patch was extracted from https://reviews.freebsd.org/D19036
Submitted by: Bert JW Regeer <xistence@0x58.com>
Reviewed by: manu
The nexus module was missing method for releasing bus resources. As a
result, it couldn't be released and the bus_release_resource() call would
return ENXIO.
Next call to bus_alloc_resource() for the same resource was returning
error, because it wasn't released previously and it was still busy.
The implementation of the nexus_release_resource() is the same as for
arm architecture.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reported-by: Greg V <greg@unrelenting.technology>
Tested-by: cperciva, Greg V <greg@unrelenting.technology>
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
Differential revision: https://reviews.freebsd.org/D19641
Add the infrastructure to allow MD procctl(2) commands, and use it to
introduce amd64 PTI control and reporting. PTI mode cannot be
modified for existing pmap, the knob controls PTI of the new vmspace
created on exec.
Requested by: jhb
Reviewed by: jhb, markj (previous version)
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D19514
PTI mode for the process pmap on exec is activated iff P_MD_PTI is set.
On exec, the existing vmspace can be reused only if pti mode of the
pmap matches the P_MD_PTI flag of the process. Add MD
cpu_exec_vmspace_reuse() callback for exec_new_vmspace() which can
vetoed reuse of the existing vmspace.
MFC note: md_flags change struct proc KBI.
Reviewed by: jhb, markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D19514
In all of the architectures we have today, we always use PAGE_SIZE.
While in theory one could define different things, none of the
current architectures do, even the ones that have transitioned from
32-bit to 64-bit like i386 and arm. Some ancient mips binaries on
other systems used 8k instead of 4k, but we don't support running
those and likely never will due to their age and obscurity.
Reviewed by: imp (who also contributed the commit message)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D19280
The plls frequency are now correctly calculated in fractional mode
and integer mode.
While here add some debug printfs (disabled by default)
Tested with powerd on the little cluster on a RockPro64.
MFC after: 1 week
This allows us to limit the number of CPUs to use, e.g. to debug problems
seen when enabling multiple clusters.
Reviewed by: manu
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D19404
Marvell XHCI is in fact generic-xhci, so move the driver and
add the compatible string.
While here, get and enable the phy if the dtb provide one.
The xhci bindings state that phys should be in a 'phys' property but
Marvell DTS uses 'usb-phy', only add support for 'usb-phy' for now.
Sponsored-by: Rubicon Communications, LCC ("Netgate")
Remove the mode_val from the clock definition as it's a bit unreadable.
Use mode_shift to represent which bit control the mode in the register.
Simplify some case where we can avoid a register read before changing it.
Set the PLL back to normal mode after the PLL have stabilized.
Discussed with: mmel
MFC after: 1 week
No map function was provided before so every regulator lookup resolved
the regulator with id 1, as it uses the default mapper, which is wrong.
Correctly map the regulators.
While here remove some debug printfs and make them disable by default.
MFC after: 1 week
RockChip clocks register have a write mask in the upper 16 bits, if a 1
is present the corresponding bit in the lower 16 ones is set.
Use this instead of always setting the mask to 0xFFFF0000.
This avoids a read of the register.
While here, when switching PLL frequency, first switch it to slow mode.
When set to slow mode the PLL clock will be the external oscillator.
Changing the PLL parameters while its output is used can cause hang (sometimes).
MFC after: 1 week
RockChip clocks register have a write mask in the upper 16 bits, if a 1
is present the corresponding bit in the lower 16 ones is set.
Use this instead of always setting the mask to 0xFFFF0000.
This avoids a read of the register.
While here set the parent after changing its freqeuncy, this reduce the time
between changing the parent and changing the divider for the arm clock.
MFC after: 1 week
RockChip clocks register have a write mask in the upper 16 bits, if a 1
is present the corresponding bit in the lower 16 ones is set.
Use this instead of always setting the mask to 0xFFFF0000.
This avoids a read of the register.
While here add some debug printf useful for debuging clock problems
MFC after: 1 week
RockChip clocks have a write mask in the upper 16bits of the mux register
which wasn't set in the set_mux function.
Also the wrong parent was tested instead of the real current one, when
switch parent, test with the current one before.
Pointy Hat: manu
MFC after: 1 week
Skylake Xeons.
See SDM rev. 68 Vol 3 4.6.2 Protection Keys and the description of the
RDPKRU and WRPKRU instructions.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D18893
Make every rockchip file depend on the multiple soc_rockchip options
While here make rk_i2c and rk_gpio depend on their device options.
Reported by: sbruno
The COVERAGE option breaks xtoolchain-gcc GENERIC kernel early boot
extremely badly and hasn't been fixed for the ~week since it was committed.
Please enable for GENERIC only when it doesn't do that.
Related fallout reported by: lwhsu, tuexen (pr 235611)
When moving from an invalid to a valid entry we don't need to invalidate
the tlb, however we do need to ensure the store is ordered before later
memory accesses. This is because this later access may be to a virtual
address within the newly mapped region.
Add the needed barriers to places where we don't later invalidate the
tlb. When we do invalidate the tlb there will be a barrier to correctly
order this.
This fixes a panic on boot on ThunderX2 when INVARIANTS is turned off:
panic: vm_fault_hold: fault on nofault entry, addr: 0xffff000040c11000
Reported by: jchandra
Tested by: jchandra
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D19097
We need to ensure the page table store has happened before the tlbi.
Reported by: jchandra
Tested by: jchandra
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D19097
acpi_iort.c has added support to query GIC proximity and MSI XREF
ID for GIC ITS blocks. Use this when GIC ITS blocks are initialized
from ACPI.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D18003
Add new file arm64/acpica/acpi_iort.c to support the "IO Remapping
Table" (IORT). The table is specified in ARM document "ARM DEN 0049D"
titled "IO Remapping Table Platform Design Document". The IORT table
has information on the associations between PCI root complexes, SMMU
blocks and GIC ITS blocks in the system.
The changes are to parse and save the information in the IORT table.
The API to use this information is added to sys/dev/acpica/acpivar.h.
The acpi_iort.c also has code to check the GIC ITS nodes seen in the
IORT table with corresponding entries in MADT table (for validity)
and with entries in SRAT table (for proximity information).
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D18002
This allows userspace to trace the kernel using the coverage sanitizer
found in clang. It will also allow other coverage tools to be built as
modules and attach into the same framework.
Sponsored by: DARPA, AFRL
iflib is already a module, but it is unconditionally compiled into the
kernel. There are drivers which do not need iflib(4), and there are
situations where somebody might not want iflib in kernel because of
using the corresponding driver as module.
Reviewed by: marius
Discussed with: erj
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D19041
This will allow multiple consumers of the coverage data to be compiled
into the kernel together. The only requirement is only one can be
registered at a given point in time, however it is expected they will
only register when the coverage data is needed.
A new kernel conflig option COVERAGE is added. This will allow kcov to
become a module that can be loaded as needed, or compiled into the
kernel.
While here clean up the #include style a little.
Reviewed by: kib
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D18955
- Remove CS=2 entry from spigen-rpi2 since it didn't work
- Add spigen-rpi3 overlay for Raspberry Pi 3
- Enable rpi overlay modules for GENERIC kernel on aarch64
PR: 233489
Submitted by: bobf@mrp3.com
Reviewed by: db
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D16088
The cache_handle_range macro to handle the arm64 instruction and data
cache operations would return when it was complete. This causes problems
for arm64_icache_sync_range and arm64_icache_sync_range_checked as they
assume they can execute the i-cache handling instruction after it has been
called.
Fix this by making this assumption correct.
While here add missing instruction barriers and adjust the style to
match the rest of the assembly.
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D18838
cpu_icache_sync_range(), except that it sets pcb_onfault to catch any page
fault, as doing cache maintenance operations for non-mapped generates a
data abort, and use it in freebsd32_sysarch(), so that a userland program
attempting to sync the icache with unmapped addresses doesn't crash the
kernel.
Spotted out by: andrew
When building with KCOV enabled the compiler will insert function calls
to probes allowing us to trace the execution of the kernel from userspace.
These probes are on function entry (trace-pc) and on comparison operations
(trace-cmp).
Userspace can enable the use of these probes on a single kernel thread with
an ioctl interface. It can allocate space for the probe with KIOSETBUFSIZE,
then mmap the allocated buffer and enable tracing with KIOENABLE, with the
trace mode being passed in as the int argument. When complete KIODISABLE
is used to disable tracing.
The first item in the buffer is the number of trace event that have
happened. Userspace can write 0 to this to reset the tracing, and is
expected to do so on first use.
The format of the buffer depends on the trace mode. When in PC tracing just
the return address of the probe is stored. Under comparison tracing the
comparison type, the two arguments, and the return address are traced. The
former method uses on entry per trace event, while the later uses 4. As
such they are incompatible so only a single mode may be enabled.
KCOV is expected to help fuzzing the kernel, and while in development has
already found a number of issues. It is required for the syzkaller system
call fuzzer [1]. Other kernel fuzzers could also make use of it, either
with the current interface, or by extending it with new modes.
A man page is currently being worked on and is expected to be committed
soon, however having the code in the kernel now is useful for other
developers to use.
[1] https://github.com/google/syzkaller
Submitted by: Mitchell Horne <mhorne063@gmail.com> (Earlier version)
Reviewed by: kib
Testing by: tuexen
Sponsored by: DARPA, AFRL
Sponsored by: The FreeBSD Foundation (Mitchell Horne)
Differential Revision: https://reviews.freebsd.org/D14599
In cpu_thread_alloc we would allocate space for the trap frame at the top of
the kernel stack. This is just below the pcb, however due to a missing cast
the pointer arithmetic would use the pcb size, not the trapframe size. As
the pcb is larger than the trapframe this is safe, however later in cpu_fork
we include the case leading to the two disagreeing on the location.
Fix by using the same arithmetic in both locations.
Found by: An early KASAN patch
Sponsored by: DARPA, AFRL
We need to tell vm_fault the reason for the fault was because we tried to
execute from the memory location. Without this it may return with success
as we only request read-only memory, then we return to the same location
and try to execute from the same memory address. This leads to an infinite
loop raising the same fault and returning to the same invalid location.
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D18511
