Uses two GPIO pins as MDC (clock) and MDIO (bidirectional I/O), relies
on mii_bitbang.
Tested on SG-3200 where the PHY for one of the ports is wired independently
of the SoC MDIO bus.
Sponsored by: Rubicon Communications, LLC (Netgate)
While here, call device_delete_children() to detach and dealloc all the
existent children and handle the child's detach errors properly.
Reported by: jenkins, hselasky, ian
Sponsored by: Rubicon Communications, LLC (Netgate)
This is the half of the changes required that work as-is with both in-tree
ZFS and the new hotness, sysutils/openzfs. Highlights are less dependency
on header pollution (from somewhere) and using 'mnttab' instead of
'extmnttab'. In the in-tree ZFS, the latter is a #define for the former,
but in the port extmnttab is actually a distinct struct that's a super-set
of mnttab. We really want mnttab here anyways, so just use it.
This constant was used to reserve space at the top of the stack to
hold translated system call arguments for non-default ABIs (the
"stackgap"). However, none of the compatibility ABIs have used the
stackgap in many years and the last use of SPARE_USRSPACE was removed
in r355373.
Reviewed by: kib
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D22697
Update the comment related to SIIT and v4mapped addresses being rejected
by us when coming from the wire given we have supported IPv6-only kernels
for a few years now.
See also draft-itojun-v6ops-v4mapped-harmful.
Suggested by: melifaro
MFC after: 2 weeks
pp->private just can not be NULL in those places.
In g_disk_start() and g_disk_ioctl() both dp != NULL and !dp->d_destroyed
should always be true if disk_gone() and disk_destroy() are used properly,
since GEOM does not send requests to errored providers. If the protocol is
not followed, then no amount of additional checks here give real safety.
In g_disk_access() though the checks are useful, since GEOM blocks only
new opens for errored providers, but allows closes. It should not happen
if disk_gone() and disk_destroy() are used properly, but may otherwise.
To improve cases when disk_gone() is not used, call it from disk_destroy().
It does not give full guaranties, but it errors the provider and makes
GEOM block unwanted requests at least after some race.
MFC after: 2 weeks
In ip6_input() we apply the same v4mapped address check twice. The only
case which skipps the first one is M_FASTFWD_OURS which should have passed
the check on the firstinput pass and passed the firewall.
Remove the 2nd redundant check.
Reviewed by: kp, melifaro
MFC after: 2 weeks
Sponsored by: Netflix (originally)
Differential Revision: https://reviews.freebsd.org/D22462
Change the remaining caddr_t usages to char * following the removal
of the KAME macros
No functional change.
Requested by: glebius
Reviewed by: glebius
MFC after: 2 weeks
Sponsored by: Netflix (originally)
Differential Revision: https://reviews.freebsd.org/D22399
Two changes to EPOCH_TRACE:
(1) add a sysctl to surpress the backtrace from epoch_trace_report().
Sometimes the log line for the recursion is enough and the
backtrace massively spams the console.
(2) In order to be able to go without the backtrace do not only
print where the previous occurance happened, but also where
the current one happens. That way we have file:line information
for both and can look at them without the need for getting line
numbers from backtrace and a debugging tool.
Reviewed by: glebius
Sponsored by: Netflix (originally)
Differential Revision: https://reviews.freebsd.org/D22641
ConnectX-6 DX.
Currently TLS v1.2 and v1.3 with AES 128/256 crypto over TCP/IP (v4
and v6) is supported.
A per PCI device UMA zone is used to manage the memory of the send
tags. To optimize performance some crypto contexts may be cached by
the UMA zone, until the UMA zone finishes the memory of the given send
tag.
An asynchronous task is used manage setup of the send tags towards the
firmware. Most importantly setting the AES 128/256 bit pre-shared keys
for the crypto context.
Updating the state of the AES crypto engine and encrypting data, is
all done in the fast path. Each send tag tracks the TCP sequence
number in order to detect non-contiguous blocks of data, which may
require a dump of prior unencrypted data, to restore the crypto state
prior to wire transmission.
Statistics counters have been added to count the amount of TLS data
transmitted in total, and the amount of TLS data which has been dumped
prior to transmission. When non-contiguous TCP sequence numbers are
detected, the software needs to dump the beginning of the current TLS
record up until the point of retransmission. All TLS counters utilize
the counter(9) API.
In order to enable hardware TLS offload the following sysctls must be set:
kern.ipc.mb_use_ext_pgs=1
kern.ipc.tls.ifnet.permitted=1
kern.ipc.tls.enable=1
Sponsored by: Mellanox Technologies
Interrupt based driver, implements SPI mode and clock configuration.
Tested on espressobin and SG-3200.
Sponsored by: Rubicon Communications, LLC (Netgate)
and remove a couple scattered local declarations.
Most of these aren't referenced in C code (there are some references in
asm code), and they also aren't documented anywhere. This helps a bit
with the latter.
For normal I/Os consumer and provider statuses are checked by g_io_check().
But ioctl calls often do not go through it, being dispatched directly. This
change makes their semantics more alike, protecting lower levels.
MFC after: 2 weeks
They're in both the old and new places in HEAD for the moment for
discussion and transition. The old locations will be garbage collected
in 4 weeks. MFCs to 12 an 11 will keep the old and new for transition
purposes.
Reviewed by: kib
MFC after: 4 weeks
Sponsored by: Intel
Differential Revision: https://reviews.freebsd.org/D22590
This is a preliminary commit of NFSv4.2 definitions that will be used by
subsequent commits which adds NFSv4.2 support to the NFS client and server.
There will be a series of these preliminary commits that will prepare for
a major commit of the NFSv4.2 client/server changes currently found in
subversion under projects/nfsv42/sys.
Add ATF tests for most gmultipath operations. Add some dtrace probes too,
primarily for configuration changes that happen in response to provider
errors.
PR: 178473
MFC after: 2 weeks
Sponsored by: Axcient
Differential Revision: https://reviews.freebsd.org/D22235
The SES4r3 standard requires that element descriptors may only contain ASCII
characters in the range 0x20 to 0x7e. Some SuperMicro expanders violate
that rule. This patch adds a sanity check to ses(4). Descriptors in
violation will be replaced by "<invalid>".
This patch fixes "sesutil --libxo xml" on such systems. Previously it would
generate non-well-formed XML output.
PR: 241929
Reviewed by: allanjude
MFC after: 2 weeks
Sponsored by: Axcient
When the linker doesn't have this feature, add -mno-relax to CFLAGS
on RISC-V.
Define the feature for ld.bfd, but not lld. If lld gains relaxation
support in a newer version, we can enable it for those versions of lld
in bsd.linker.mk.
Reviewed by: mhorne
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D22659
preempted after an "ic" or "tlbi" instruction but before it performed a
"dsb" instruction. The "ic" and "tlbi" instructions have unusual
synchronization requirements. If the old thread migrates to a new
processor, its completion of a "dsb" instruction on that new processor does
not guarantee that the "ic" or "tlbi" instructions performed on the old
processor have completed.
This issue is not restricted to the kernel. Since locore.S sets the UCI bit
in SCTLR, user-space programs can perform "ic ivau" instructions (as well as
some forms of the "dc" instruction).
Reviewed by: andrew, kib, markj, mmel
X-MFC with: r355145
Differential Revision: https://reviews.freebsd.org/D22622
Coverity points out that we've already dereferenced m by the time we check, so
there's no reason to keep the check. Moreover, it's safe to pass NULL to
m_freem() anyway.
CID: 1019092
The recent rpi-firmware update renamed "0" to "zero" in the RPi0 DTB
filename
It also included the components needed to boot the RPi4, so install those
now -- interested parties can install sysutils/u-boot-rpi4 and copy
config_rpi4.txt to config.txt on the FAT partition in order to boot the
board. Do note that we currently don't support ethernet/usb/pci.
Reviewed by: manu
MFC after: 3 days
While the interaction between this and the ETCSYMLINK option of
security/ca_root_nss isn't necessarily fatal, one should be aware and
attempt to understand the ramifications of mixing the two.
ports-secteam will be contacted to discuss the default option for branches
where certs are being included in base.
The hardware offload is primarily targeted for TLS v1.2 and v1.3,
using AES 128/256 bit pre-shared keys. This patch adds all the needed
hardware structures, capabilites and firmware commands.
Sponsored by: Mellanox Technologies
First, this removes a spurious difference compared to rw locks.
More importantly though this avoids a trip through sleepq code if the lock
happens to be caught in this state.
In most cases with debug disabled this function does nothing, but argument
passing and the call still cost measurable time due to cache misses, etc.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
It closes the race condition and so allows to remove few NULL checks.
Also while there, use dev->si_drv1 in addition to cp->private to store
softc pointer. For calls coming from the dev side it gives reliable cache
hit instead of often miss before.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
This controller is a bit tricky as the STOP condition must be indicated in
the last tranferred byte, some devices will not like the repeated start
behavior of this controller. A proper fix to this issue is in the works.
This driver works in polling mode, can be used early in the boot (required
in some cases).
Tested on espressobin/SG-1100 and the SG-3200.
Obtained from: pfSense
Sponsored by: Rubicon Communications, LLC (Netgate)
This is a preliminary commit of NFSv4.2 definitions that will be used by
subsequent commits which adds NFSv4.2 support to the NFS client and server.
There will be a series of these preliminary commits that will prepare for
a major commit of the NFSv4.2 client/server changes currently found in
subversion under projects/nfsv42/sys.
Conditional branch and jump instructions do not always call via PLT
stubs and thus will not honor LD_PRELOAD, etc. lld warns about using
non-preemptible relocations for preemptible or unknown symbols whereas
bfd does not (at least for RISC-V).
Reviewed by: br, James Clarke
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D22658
This saves an instruction in each case as well as an extra memory
indirection via the GOT for PIC code.
Reviewed by: br, James Clarke
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D22656
If the starting pindex is equal to object->size, there is nothing to do.
This was harmless since the rest of vm_map_pmap_enter() has no effect
when psize == 0.
Submitted by: Wuyang Chung <wuyang.chung1@gmail.com>
Reviewed by: alc, dougm, kib
MFC after: 1 week
Github PR: https://github.com/freebsd/freebsd/pull/417
Differential Revision: https://reviews.freebsd.org/D22678
These are cast to uma_import and uma_release functions. Use the signature
for these in the zone functions.
This was found with an experimental Kernel CFI. It will complain if the
signature is different than what a function pointer expects. The
simplest way to fix these is to correct the signature.
Reviewed by: rlibby
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22671
