Unconditional writing to MAS7, which doesn't exist on the e500v1 core, in a
TLB miss handler has been in the code for several years now. Since this has
gone unnoticed for so long, it's easily concluded that e500v1 is not in use
with FreeBSD. Simplify the code path a bit, by unconditionally zeroing MAS7
instead of calling a subroutine to do it.
r18 is used to hold the old PCB flags, but cpu_throw doesn't populate r18
with PCB flags, since the old thread is gone. This can lead to panics on
cores that don't have the registers guarded by these flags.
This version fixes the problems identified in r345244.
Reviewed by: kib
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19598
* Replace all instances of freebsd-testing with `#test`. `#test` is the
Phabricator group that focuses on test-related reviews.
* Replace `atf` with contrib/atf, as that's the actual location for the test
framework.
* Remove jmmv@ from the maintainers list for atf. He is the upstream project
owner, but was moved to alumni status after r345787.
* Fix a typo accidentally introduced in r346899 (inpact -> impact).
Add a note to MAINTAINERS requesting pre-commit review from the graphics
team, using phabricator, for changes to the lkpi subsystem. This is done in
order to give us a chance to test the graphics drivers (drm drivers) for
regressions, and to try to avoid breakage, errors and issues with the
graphics drivers.
The review is done via the #x11 group on phabricator.
Please note that hselasky also want to review changes.
Discussed with: hselasky, imp
Approved by: imp
Turning on multicast debug made multicast failure worse
because the strings and #define values no longer matched
up. Fix them, and make sure they stay matched-up.
Submitted by: torek
MFC after: 1 week
Sponsored by: iXsystems, Inc.
This change makes it easier to enable/disable the inclusion of
OPAL flash in the kernel.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D20098
so it does not require a bounce buffer. The only need for this was
to align the buffer address. Implement unaligned access and we don't
need to copy data twice.
o Remove contigmalloc-based bounce buffer from xDMA code since it is
not suitable for arbitrary memory provided by platform, which is
sometimes a dedicated piece of memory that is not managed by OS at all.
Sponsored by: DARPA, AFRL
cursor from 16x16 (with 6 columns unused) to 10x16 and rename it to
the "small" cursor. Add a "large" 19x32 cursor and use it for screen
widths larger than 800 pixels. Use libvgl's too-small indentation for
the large data declarations.
MOUSE_IMG_SIZE = 16 is still part of the API. If an application supplies
invalid bitmaps for the cursor, then the results may be different from
before.
complications in the previous methods.
r346761 broke showing the mouse cursor after changing its state from
off to on (including initially), since showing the cursor uses the
state to decide whether to actually show and the state variable was
not changed until after null showing. Moving the mouse or copying
under the cursor fixed the problem. Fix this and similar problems for
the on to off transition by changing the state variable before drawing
the cursor.
r346641 failed to turn off the mouse cursor on exit from vgl. It hid
the cursor only temporarily for clearing. This doesn't change the state
variable, so unhiding the cursor after clearing restored the cursor if its
state was on. Fix this by changing its state to VGL_MOUSEHIDE using the
application API for changing the state.
Remove the VGLMouseVisible state variable and the extra states given by it.
This was an optimization that was just an obfuscation in at least the
previous version.
Staticize VGLMouseAction(). Remove VGLMousePointerShow/Hide() except as
internals in __VGLMouseMode(). __VGLMouseMouseMode() is the same as the
application API VGLMouseMouseMode() except it returns the previous mode
which callers need to know to restore it after hiding the cursor.
Use the refactoring to make minor improvements in a simpler way than was
possible:
- in VGLMouseAction(), only hide and and unhide the mouse cursor if the
mouse moved
- in VGLClear(), only hide and and unhide the mouse cursor if the clearing
method would otherwise clear the cursor.
These predicates are vestigal and cannot be true today. For example,
idle threads are not allowed to acquire locks.
Also cache curthread in breada().
No functional change intended.
Reviewed by: kib, mckusick
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20066
opcodes when it is needed.
This should fix the problem, when printed by `ipfw show` rule could not
be added due to missing "proto" keyword.
MFC after: 2 weeks
When set, we ignore all the hints that the UEFI boot manager has set
for us. We also always fail back to the OK prompt when we can't find
the right thing to boot rather than failing back to the UEFI boot
manager. This has the side effect of also expanding the cases where we
fail back to the OK prompt to include when we're booted under UEFI,
but UEFI::BootCurrent isn't set in the environment and we can't find a
proper place to boot from.
Reviewed by: bcran
Differential Revision: https://reviews.freebsd.org/D20016
If uefi_rootdev is set in the environment, then treat it like a device
path. Convert the string to a device path and see if we can find a
device that matches. If so, use that device at our root dev no matter
what. If it's bad in any way, the boot will fail.
Reviewed by: bcran
Differential Revision: https://reviews.freebsd.org/D20016
partition as if it were on the command line.
Fetch FreeBSD-LoaderEnv UEFI enviornment variable. If set, read in
loader environment variables from it. Otherwise read in
/efi/freebsd/loader.env. Both are read relative to the device
loader.efi loaded from (they aren't full UEFI device paths)
Next fetch FreeBSD-NextLoaderEnv UEFI environment variable. If
present, read the file it points to in as above and delete the UEFI
environment variable so it only happens once.
This lets one set environment variables in the bootloader.
Unfortunately, we don't have all the mechanisms in place to parse the
file, nor do we have the magic pattern matching in place that
loader.conf has. Variables are of the form foo=bar. No quotes are
supported, so spaces aren't allowed, for example. Also, variables like
foo_load=yes are intercepted when we parse the loader.conf file and
things are done based on that. Since those aren't done here, variables
that cause an action to happen won't work.
Reviewed by: bcran
Differential Revision: https://reviews.freebsd.org/D20016
This is added for letting these long failing test case pass, and for
consistency. The test code should be fixed later to not output this extra
empty line.
Sponsored by: The FreeBSD Foundation
This way its children can attach earlier if needed, and some subsystems are
attached earlier, like the asynchronous token management.
MFC after: 2 weeks
It was reported that without #ifdef INET6 around the declaration of "nbuf",
a build would report an unused variable. For some reason, I didn't see that
warning when I did a build, but it seems reasonable to add these #ifdef INET6's.
Submitted by: dmitryluhtionov@gmail.com
MFC after: 1 week
server in the background. However, when running in the background,
stdin is closed and ncat initiates a graceful shutdown of the SCTP
association. This is not expected by the client. Therefore, the
ncat-based discard server is replaced by a perl-based one.
In addition, to remove the dependency from ncat, which needs to be
installed via the nmap port, also the code testing for a free SCTP port
is changed to use the perl-based client.
Finally, remove some debug output from the report generated.
Reviewed by: lwhsu@
Differential Revision: https://reviews.freebsd.org/D20086
When using -S0, seed the PRNG with the current time in nanoseconds, not
seconds, so consecutive runs don't accidentally use the same seed.
Also, rename some variables for clarity.
Reviewed by: ngie
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20078
It cannot load it automatically at boot, because the root filesystem
is not there yet. An alternative would be adding ispfw(4) to GENERIC,
but it's an additional 1MB.
Reviewed by: mav
MFC after: 2 weeks
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D19369
Add support to enable, save, and restore the following facilities:
* Target Address Register (bctar) -- seemingly just another register to
branch to.
* Event-based branching -- an interrupt-like userspace event handler
subsystem.
* Load-monitored facility -- A facility that allows monitoring a range of
physical memory, and triggering an event on access. Targeted to garbage
collection software features.
The Data Stream Control Register (DSCR) is privileged on POWER7, but
unprivileged (different register) on POWER8 and later. However, it's now
guarded by a new register, the Facility Status and Control Register, instead of
the MSR like other pre-existing facilities (FPU, Altivec). The FSCR must be
managed explicitly, since it's effectively an extension of the MSR.
Tested by: Brandon Bergren
We don't have the display engine driver commited in FreeBSD yet so it is
useless to expose the clocks yet (and also it have not been tested on H5).
Reported by: Manuel Stühn (freebsdnewbie@freenet.de)
PR: 237571
MFC after: 1 week
Allwinner H3 and H5 share many internal components, that's why they can
use the same drivers.
This patch adds the compatible strings to enable clock drivers
probing on Allwinner NanoPI NEO2 device.
Tested on: NanoPi NEO2 (by submitter), OrangePi PC2 (by manu)
Submitted by: Manuel Stühn (freebsdnewbie@freenet.de)
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D20069
The POWER8NVL (POWER8 NVLink) architecturally behaves identically to the
POWER8, with a different PVR identifier. Mark it as such, so it shows up
appropriately to the user.
Reported by: Alexey Kardashevskiy
MFC after: 2 weeks
Since the non-volatile registers are restored at the end of cpu_switchin (of
the new thread) they're free for us to use for our own purposes. Load the
PCB_FLAGS into a non-volatile register so it's preserved across the C
function calls that manage FPU and altivec state. This removes 4 loads from
each file. Might be a trivial performance improvement (~12 clock cycles per
context switch).
MFC after: 3 weeks
Some PPC systems (PowerNV) use msdosfs for /boot, which can't handle either
symlinks or hardlinks. So on PPC, copy the module instead. This change fixes
installkernel on such systems after r345350.
Reported by: Brandon Bergren <git_bdragon.rtk0.net>
Reviewed by: jhibbits, rgrimes
MFC after: 2 weeks
MFC-With: 345350, 346441
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19993
cursor must be merged with the shadow buffer on the way to the screen,
and __VGLBitmapCopy() now has an option to do exactly that. This is
insignificantly less efficient.
illumos update: https://www.illumos.org/issues/10598
Add map-vdisk and unmap-vdisk commands to create virtual disk interface on top of file. This will allow to use disk image from file system to load and start the kernel.
By mapping file, we create vdiskX device, the device will be listed by lsdev [-v] and can be accessed directly as ls vdisk0p1:/path or can be used as value for currdev variable.
vdisk strategy function does not use bcache as we have bcache used with backing file. vdisk can be unmapped when all consumers have closed the open files.
In first iteration we do not support the zfs images because zfs pools do keep the device open (there is no "zpool export" mechanism). Adding zfs support is relatively simple, we just need to run zfs disk probe after mapping is done.
Differential Revision: https://reviews.freebsd.org/D19733
display, not just in the unpanned top left corner. This currently
makes no difference since the kernel erroneously doesn't allow moving
the cursor completely outside of the unpanned corner.
Update ci-qemu-test.sh
o Update the path to the OVMF file, which is now in /usr/local/share/uefi-edk2-qemu.
o Use the more modern q35, pc-q35-3.0 (Q35 + ICH9, 2009) QEMU machine
instead of the default, obsolete pc, pc-i440fx-3.0 (i440FX + PIIX, 1996).
For example this adds ACPI support.
o Specify the system firmware using the newer pflash drive syntax instead
of bios.
o Remove extra, unneeded devices by passing -nodefaults.
o Change text to talk about 'firmware' instead of 'bios', since UEFI
isn't a BIOS.
Reviewed by: imp, emaste
Differential Revision: https://reviews.freebsd.org/D20074
hiding the mouse cursor. The showing and hiding is often done
asynchronously in a not very safe signal handler, but the state of
these registers and much more is protected from the signal handler
in a better way by deferring mouse signals while the state is in use.
support for 24-bit modes.
The non-segmented case has worked for a long time, but the segmented
case could never have worked since 24-bit accesses may cross a window
boundary but the window was not changed in the middle of the specialized
24-bit accesses for writing a single pixel.
