the essentially identical generic implementations instead. The generic
implementations differ only in the spelling of a couple variable names
and some formatting differences.
include it accordingly. The build machinery for universe and tinderbox
tries to build every kernel config whose name begins and ends with [A-Z0-9]
and the common include file that has most of the options isn't buildable
by itself, so the new lowercase .common will avoid building it.
accessed through the direct map unless the kernel configuration actually
includes a direct map. Only a few configurations do, and for the rest the
unnecessary free page pool is a small pessimization.
Tested by: zbb
MFC after: 6 weeks
Use the published compatible strings (our own invention, "ti,mmchs" is
still accepted as well, for now).
Don't blindly turn on 8-bit bus mode, because even though the conroller
supports it, the board has to be wired appropriately as well. Use the
published property (bus-width=<n>) and honor all the valid values (1,4,8).
The eMMC device on a Beaglebone Black is wired for 8-bit, update the dts.
The mmchs controller can inherently do both 1.8v and 3.0v on the first
device and 1.8v only on other devices, unless an external transceiver is
used. Set the voltage automatically for the first device and honor
the published fdt property (ti,dualvolt) for other devices.
Thanks go to Ilya Bakulin for figuring out the voltage compatibility stuff.
threaded handlers.
It's not easy to see from the diffs of this change exactly how it
accomplishes the above. The arm_mask_irq() and arm_unmask_irq() functions
are, respectively, the pre_thread and post_thread hooks. Not seen in
these diffs, the arm_post_filter() routine also EOIs. The post_filter
routine runs after filter handlers if there will be no threaded handlers,
so it just EOIs. The pre_thread routine masks the interrupt (at the
controller, not the source) and EOIs. So one way or another, the EOI
happens at the point where filter handlers are done.
the interrupt handler. If the event callback starts a new short timeout,
the timer can fire before returning from the event callback, and clearing
the interrupt status after that loses the interrupt and hangs until the
counter wraps. Fixing all of this removes the need for the do-nothing
loop at the top of the handler which really just waited for the counter to
roll over and reach the one-shot count again.
Also add a missing return(0) in the periodic timer start case.
Use values of the correct defines to determine statement's result.
ARM_ARCH_ symbols are always defined, hence only values are relevant.
Reviewed by: cognet
Sheeva PJ4Bv6 - based chips were only prototypes for V7 class Armada
SoC family. Current in-tree support for PJ4Bv6 will not work and also
there should be no platforms in active use that would incorporate that
CPU revision.
Loading kernel to 0xf00000 has no practical reason.
Starting it from the u-boot's highest possible end address
(2MB counting from 0x0) makes more sense.
Tested by: kevlo
Depending on u-boot's flavor some boards have their SoC registers
base address configured to 0xD0000000 and other to 0xF1000000.
U-boot is passing currently set value via CP15 register.
In order to create proper mapping for SoC registers and allow further
successful initialization it is necessary to replace fdt_immr_pa with
the real value and eventually fix-up device tree blob.
Tested by: kevlo
Armada XP initialization flow requires SoC registers to be
mapped very early in order to configure Snoop Filter for SMP.
Additional mapping in locore.S is redundant as proper mapping is
made in pmap_devmap_bootstrap() prior to calling cpu_setup() which
configures the Snoop Filter.
For secondaru CPUs it is better to pass VA of the SoC
registers defined in MV_BASE and PA consistent with the value
in the Device Tree.
Tested by: kevlo
vm_pages. Provide trivial implementation which forwards the load to
_bus_dmamap_load_phys() page by page. Right now all architectures use
bus_dmamap_load_ma_triv().
Tested by: pho (as part of the functional patch)
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
The only remaining user was the code that allocates bounce pages for armv4
busdma. It's not clear why bounce pages would need uncached memory, but
if that ever changes, kmem_alloc_attr() would be the way to get it.
really need it. That would be almost everywhere it was included. Add
it in a couple files that really do need it and were previously getting
it by accident via another header.
included by vm/pmap.h, which is a prerequisite for arm/machine/pmap.h
so there's no reason to ever include it directly.
Thanks to alc@ for pointing this out.
of the address space downwards, and then returning the lowest mapped
device address from initarm_lastaddr(). This adds over 500MB of kva
space compared to the old way of hardcoding the end address as 0xE0000000.
Also, pre-map most of the SoC's common memory-mapped devices using 1MB
section mappings so that all device access uses just a few TLB entries.
Graphics devices aren't mapped this way yet, but probably should be.
To provide this new functionality without pasting identical code into
multiple imxNN_machdep.c files, rework the imx machdep code so that
things common to the whole family of SoCs are in a new imx_machdep.c file.
The rewritten imxNN_machdep.c files contain just things specific to an
individual SoC.
- The new allocator won't return coherent memory for any size > PAGE_SIZE,
so don't assume we have coherent memory, and explicitely use
bus_dmamap_sync().
Freescale SoCs including the i.MX series. This also works for the newer
SoCs with the ENET gigabit controller, but doesn't use any of the new
hardware features other than enabling gigabit speed.
the right register for power managment. It
was incorrectly using the clock register
which also caused the status to be the
opposite of what it is supposed to be.
1 - its disabled
0 - its enabled
Per kirkwood spec FSS_88F6180_9x_6281_OpenSource.pdf
correctly by doing nothing, then add a panic for the default case, because
that implies that some driver asked for a sync (probably incorrectly) and
nothing was done.
there as "kern.ipc.sendfile.readahead".
- Push all nsfbuf related tunables into MD code. Don't move them
to new namespace in favor of POLA.
Reviewed by: scottl
Approved by: re (gjb)
Previous change applied in r255613 fixed build for ARMv6 but
broke it for previous architecture revisions. This commit
eventually fixes GCC build for all ARM revisions.
Approved by: cognet (mentor)
Approved by: re (kib)
pmap_clear_reference() has had exactly one caller in the kernel for
several years, more precisely, since FreeBSD 8. Now, that call no
longer exists.
Approved by: re (kib)
Sponsored by: EMC / Isilon Storage Division
While here, correct all consumers to pass NULL instead of 0 as we pass
capability rights as pointers now, not uint64_t.
Reported by: Daniel Peyrolon
Tested by: Daniel Peyrolon
Approved by: re (marius)
Apply the given advice to the specified range of addresses within the
given pmap. Depending on the advice, clear the referenced and/or
modified flags in each mapping. Superpage within the given range will
be demoted or destroyed.
Reviewed by: alc
Approved by: cognet (mentor)
Approved by: re
When clearing the modification status of the superpage, one of the
base pages produced during demotion should be marked as write disabled.
The intention is that subsequent write access may repromote.
In the current implementation this was done wrong as write permission was
granted instead of forbidden.
Approved by: cognet (mentor)
Approved by: re
for ARM.
This is quite ugly, because it has to work around a clang bug that does not
allow built-in functions to be defined, even when they're ones that are
expected to be built as part of a library.
Reviewed by: ed
MADV_DONTNEED) and madvise(..., MADV_FREE). Specifically, introduce a new
pmap function, pmap_advise(), that operates on a range of virtual addresses
within the specified pmap, allowing for a more efficient implementation of
MADV_DONTNEED and MADV_FREE. Previously, the implementation of
MADV_DONTNEED and MADV_FREE relied on per-page pmap operations, such as
pmap_clear_reference(). Intuitively, the problem with this implementation
is that the pmap-level locks are acquired and released and the page table
traversed repeatedly, once for each resident page in the range
that was specified to madvise(2). A more subtle flaw with the previous
implementation is that pmap_clear_reference() would clear the reference bit
on all mappings to the specified page, not just the mapping in the range
specified to madvise(2).
Since our malloc(3) makes heavy use of madvise(2), this change can have a
measureable impact. For example, the system time for completing a parallel
"buildworld" on a 6-core amd64 machine was reduced by about 1.5% to 2.0%.
Note: This change only contains pmap_advise() implementations for a subset
of our supported architectures. I will commit implementations for the
remaining architectures after further testing. For now, a stub function is
sufficient because of the advisory nature of pmap_advise().
Discussed with: jeff, jhb, kib
Tested by: pho (i386), marcel (ia64)
Sponsored by: EMC / Isilon Storage Division
Promoting base pages to superpages can increase TLB coverage and allow for
efficient use of page table entries. This development provides FreeBSD/ARM
with superpages management mechanism roughly equivalent to what we have for
i386 and amd64 architectures.
1. Add mechanism for automatic promotion of 4KB page mappings to 1MB section
mappings (and demotion when not needed, respectively).
2. Managed and non-kernel mappings are now superpages-aware.
3. The functionality can be enabled by setting "vm.pmap.sp_enabled" tunable to
a non-zero value (either in loader.conf or by modifying "sp_enabled"
variable in pmap-v6.c file). By default, automatic promotion is currently
disabled.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Reviewed by: alc
Sponsored by: The FreeBSD Foundation, Semihalf
This allows for enabling and configuring superpages reservation mechanism in
order to allocate and populate 256 4KB base pages (for the purpose of
promotion to a 1MB superpage).
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Reviewed by: alc
Sponsored by: The FreeBSD Foundation, Semihalf
which is the part of struct vmspace, allocated from UMA_ZONE_NOFREE
zone. Initialize the pmap lock in the vmspace zone init function, and
remove pmap lock initialization and destruction from pmap_pinit() and
pmap_release().
Suggested and reviewed by: alc (previous version)
Tested by: pho
Sponsored by: The FreeBSD Foundation
The TI uart hardware is ns16550-compatible, except that before it can
be used the clocks and power have to be enabled and a non-standard
mode control register has to be set to put the device in uart mode
(as opposed to irDa or other serial protocols). This adds the extra
code in an extension to the standard ns8250 probe routine, and the
rest of the driver is just the standard ns8250 code.
The MMCHS hardware is pretty much a standard SDHCI v2.0 controller with a
couple quirks, which are now supported by sdhci(4) as of r254507.
This should work for all TI SoCs that use the MMCHS hardware, but it has
only been tested on AM335x right now, so this enables it on those platforms
but leaves the existing ti_mmchs driver in place for other OMAP variants
until they can be tested.
This initial incarnation lacks DMA support (coming soon). Even without it
this improves performance pretty noticibly over the ti_mmchs driver,
primarily because it now does multiblock IO.
There is no need for calling vm_page_dirty() when clearing "modified" flag as
it is already set for that page in pmap_fault_fixup() or pmap_enter() thanks
to "modified" bit emulation.
Also, there is no need for checking PTE "referenced" or "writeable" flags. If
there is a request to clear a particular flag we should just do it.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Reviewed by: gber
Sponsored by: The FreeBSD Foundation, Semihalf
Last input argument in pmap_modify_pv() should be a mask of flags to be set.
In pmap_change_wiring() however, the straight wired status was used, which
does not represent valid flags (and is of type boolean).
This commit fixes the issue so that wired flag is passed to pmap_modify_pv()
properly.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Reviewed by: gber
Sponsored by: The FreeBSD Foundation, Semihalf
Revise L2_S_PROT_MASK to include all of the protection bits. Notice that
clearing these bits does not always take away the corresponding permissions
(for example, permission is granted when the bit is cleared). The bits are
cleared but are to be set or left cleared accordingly in pmap_set_prot(),
pmap_enter_locked(), etc.
Clear L2_XN along with L2_S_PROT_MASK in pmap_set_prot() so that all
permissions related bits are cleared before actual configuration.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Reviewed by: gber
Sponsored by: The FreeBSD Foundation, Semihalf
- PGA_WRITEABLE indicates that there *might be* a writable mapping for the
particular page, so to avoid frequent sweeping of the pv_entries whenever
pmap_nuke_pv(), pmap_modify_pv(), etc. is called, it is sufficient to
clear that flag if there are no managed mappings for that page anymore
(notice that only pmap_enter is authorized to set this flag).
- Avoid redundant checking for PVF_WIRED flag when this flag cannot be set
anyway.
- Clear PGA_WRITEABLE only once for each vm_page instead of multiple,
redundant clearing it in loop when there are no writeable mappings
to that page anymore.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Reviewed by: gber
Sponsored by: The FreeBSD Foundation, Semihalf
- Use the right address when calling kva_free()
(Is there any reason why the s3c2xx0 comes with its own version of bs_map/
bs_unmap ? It seems to be just the same as in bus_space_generic.c)
Unify the 2 concept into a real, minimal, sxlock where the shared
acquisition represent the soft busy and the exclusive acquisition
represent the hard busy.
The old VPO_WANTED mechanism becames the hard-path for this new lock
and it becomes per-page rather than per-object.
The vm_object lock becames an interlock for this functionality:
it can be held in both read or write mode.
However, if the vm_object lock is held in read mode while acquiring
or releasing the busy state, the thread owner cannot make any
assumption on the busy state unless it is also busying it.
Also:
- Add a new flag to directly shared busy pages while vm_page_alloc
and vm_page_grab are being executed. This will be very helpful
once these functions happen under a read object lock.
- Move the swapping sleep into its own per-object flag
The KPI is heavilly changed this is why the version is bumped.
It is very likely that some VM ports users will need to change
their own code.
Sponsored by: EMC / Isilon storage division
Discussed with: alc
Reviewed by: jeff, kib
Tested by: gavin, bapt (older version)
Tested by: pho, scottl
line boundary. It has never been 100% correct, and it can't work on SMP,
because nothing prevents another core from accessing data from an unrelated
buffer in the same cache line while we invalidated it. Just use bounce pages
instead.
Reviewed by: ian
Approved by: mux (mentor) (implicit)
Add support for A20 timer.
Correct interrupt offset depending from chip.
Add basic code for CPU configuration module.
For now, add kernel config and dts file
(only FDT blob related problem needs to be solved later in
order to have one kernel for both cubieboard1 and 2).
Approved by: ray@
transparent layering and better fragmentation.
- Normalize functions that allocate memory to use kmem_*
- Those that allocate address space are named kva_*
- Those that operate on maps are named kmap_*
- Implement recursive allocation handling for kmem_arena in vmem.
Reviewed by: alc
Tested by: pho
Sponsored by: EMC / Isilon Storage Division
because an exception may happen at any time. The stack alignment rules on
ARM EABI state the only place the stack must be 8-byte aligned is on a
function boundary.
If an exception happens while a function is setting up or tearing down it's
stack frame it may not be correctly aligned. There is also no requirement
for it to be when the function is a leaf node.
The fix is to align the stack after we have stored a backup of the old stack
pointer, but before we have stored anything in the trapframe. Along with
this we need to adjust the size of the trapframe by 4 bytes to ensure the
stack below it is also correctly aligned.
Instead of hard-coding the uart register addresses for the imx51, use
a variable that defaults to the imx51 address. When debugging another
imx-family SoC, the variable can be set early in initarm() to provide
full console/printf support for debugging early boot.
* Make Yarrow an optional kernel component -- enabled by "YARROW_RNG" option.
The files sha2.c, hash.c, randomdev_soft.c and yarrow.c comprise yarrow.
* random(4) device doesn't really depend on rijndael-*. Yarrow, however, does.
* Add random_adaptors.[ch] which is basically a store of random_adaptor's.
random_adaptor is basically an adapter that plugs in to random(4).
random_adaptor can only be plugged in to random(4) very early in bootup.
Unplugging random_adaptor from random(4) is not supported, and is probably a
bad idea anyway, due to potential loss of entropy pools.
We currently have 3 random_adaptors:
+ yarrow
+ rdrand (ivy.c)
+ nehemeiah
* Remove platform dependent logic from probe.c, and move it into
corresponding registration routines of each random_adaptor provider.
probe.c doesn't do anything other than picking a specific random_adaptor
from a list of registered ones.
* If the kernel doesn't have any random_adaptor adapters present then the
creation of /dev/random is postponed until next random_adaptor is kldload'ed.
* Fix randomdev_soft.c to refer to its own random_adaptor, instead of a
system wide one.
Submitted by: arthurmesh@gmail.com, obrien
Obtained from: Juniper Networks
Reviewed by: obrien
instruction set. Thumb-2 requires an if-then instruction to implement
conditional codes.
When building for ARM mode the it-then instructions do not generate any
assembled instruction as per the ARMv7-A Architecture Reference Manual, and
are safe to use.
While this allows the atomic instructions to be built, it doesn't mean we
fully support Thumb code. It works in small tests, but is still known to
fail in a large number of places.
While here add a check for the armv6t2 architecture.
- We should check is_d32 to see howmany registers we have
- In vfp_restore mark vfpscr as an output register
Without the second part it appears we can return the incorrect value from
vfp_bounce if the VFP condition flags are set as it may override the
register holding the return value.
This follows section 18.4.2.2 SD Soft Reset Flow in the TI AM335x Technical
Reference Manual and seems to fix the "ti_mmchs0: Error: current cmd NULL,
already done?" messages.
Gcc outputs pre-UAL asm and expects the ldcl instruction with a condition
in the form ldc<c>l, where the code produces the instruction in the UAL
form ldcl<c>. Work around this by checking if we are using clang or gcc and
adjusting the instruction.
While here correct the cmp instruction's value to include the # before the
immediate value.
ePWM is controlled by sysctl nodes dev.am335x_pwm.N.period,
dev.am335x_pwm.N.dutyA and dev.am335x_pwm.N.dutyB that controls
PWM period and duty cycles for channels A and B respectively.
Period and duty cycle are measured in clock ticks. Default
clock frequency for AM335x PWM subsystem is 100MHz
pmap_remove_all()
This flag should already be cleared by pmap_nuke_pv()
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Sponsored by: The FreeBSD Foundation, Semihalf
When doing pmap_enter_locked(), enable write permission only when access
type indicates attempt to write. Otherwise, leave the page read only but
mark it writable in pv_flags.
This will result in:
1. Marking page writable during pmap_enter() but only when ensured that it
will be written right away so that we will not get redundant permissions
fault on write attempt.
2. Keeping page read only when it is permitted to be written but there was
no actual write attempt. Hence, we will get permissions fault on write
access and mark page writable in pmap_fault_fixup() what will indicate
modification status.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Sponsored by: The FreeBSD Foundation, Semihalf
Force UMA zone to allocate service structures like slabs using own
allocator. uma_debug code performs atomic ops on uma_slab_t fields
and safety of this operation is not guaranteed for write-back caches
Issues were noted by Bruce Evans and are present on all architectures.
On i386, a counter fetch should use atomic read of 64bit value,
otherwise carry from the increment on other CPU could be lost for the
given fetch, making error of 2^32. If 64bit read (cmpxchg8b) is not
available on the machine, it cannot be SMP and it is enough to disable
preemption around read to avoid the split read.
On x86 the counter increment is not atomic on purpose, which makes it
possible for the store of the incremented result to override just
zeroed per-cpu slot. The effect would be a counter going off by
arbitrary value after zeroing. Perform the counter zeroing on the
same processor which does the increments, making the operations
mutually exclusive. On i386, same as for the fetching, if the
cmpxchg8b is not available, machine is not SMP and we disable
preemption for zeroing.
PowerPC64 is treated the same as amd64.
For other architectures, the changes made to allow the compilation to
succeed, without fixing the issues with zeroing or fetching. It
should be possible to handle them by using the 64bit loads and stores
atomic WRT preemption (assuming the architectures also converted from
using critical sections to proper asm). If architecture does not
provide the facility, using global (spin) mutex would be non-optimal
but working solution.
Noted by: bde
Sponsored by: The FreeBSD Foundation
- Initialize SMAPx registers too although they're unused in QEMU
- Do not pass IO/MEM resources to upper bus for activation, handle them locally.
Previously ACTIVATE method of upper bus was no-op so nothing bad
happened. But now FDT maps physaddr to vaddr and it causes
troubles: fdtbus_activate_resource resource assumes that
bustag/bushandle are already set which in this case is wrong.
past a trapframe.
Use this macro in exception_exit as it is the function the unwinder enters
as the functions that store the frame setting lr to point to it.
Provide both __sync_*-style and __atomic_*-style functions that perform
the atomic operations on ARMv5 by using Restartable Atomic Sequences.
While there, clean up some pieces of code where it's sufficient to use
regular uint32_t to store register contents and don't need full reg_t's.
Also sync this back to the MIPS code.
check which variant we are on, and if it is a VFPv3 or v4, and has 32
double registers we save these. This fixes VFP support on Raspberry Pi.
While here clean fmrx and fmxr up to use the register names from vfp.h
as opposed to the raw register names.
Basically the situation is as follows:
- When using Clang + armv6, we should not need any intrinsics. It should
support it, even though due to a target misconfiguration it does not.
We should fix this in Clang.
- When using Clang + noarmv6, provide __atomic_* functions that disable
interrupts.
- When using GCC + armv6, we can provide __sync_* intrinsics, similar to
what we did for MIPS. As ARM and MIPS are quite similar, simply base
this implementation on the one I did for MIPS.
- When using GCC + noarmv6, disable the interrupts, like we do for
Clang.
This implementation still lacks functions for noarmv6 userspace. To be
done.
* Stop pretending we support anything other than ELF by removing code
surrounded by #ifdef __ELF__ ... #endif.
* Remove _JB_MAGIC_SETJMP and _JB_MAGIC__SETJMP, they are defined in
setjmp.h, which is able to be included from asm.
* Fix the spelling of dependent.
* Rename END _END and add END and ASEND to complement ENTRY and ASENTRY
respectively
* Add macros to simplify accessing the Global Offset Table, some of these
will be used in the upcoming update to the setjmp functions.
In order to become independent of Coherency Fabric frequency, configure
Timer and Watchdog to operate in 25MHz mode.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Copy the given range of mappings from the source map to the
destination map, thereby reducing the number of VM faults on fork.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Sponsored by: The FreeBSD Foundation, Semihalf
pmap_enter_locked() implementation was very ambiguous and confusing.
Rearrange it so that each part of the mapping creation is separated.
Avoid walking through the redundant conditions.
Extract vector_page specific PTE setup from normal PTE setting.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Sponsored by: The FreeBSD Foundation, Semihalf
Using PVF_MOD, PVF_REF and PVF_EXEC is redundant as we can get the proper
info from PTE bits.
When the mapping is marked as executable and has been referenced we assume
that it has been executed. Similarly, when the mapping is set to be writable
and is referenced, it must have been due to write access to it.
PVF_MOD and PVF_REF flags are kept just for pmap_clearbit() usage,
to pass the information on which bit should be cleared.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Sponsored by: The FreeBSD Foundation, Semihalf
Use pmap_find_pv if needed instead of multiplying its code throughout
pmap-v6.
Avoid possible NULL pointer dereference in pmap_enter_locked()
When trying to get m->md.pv_memattr, make sure that m != NULL,
in particular that vector_page is set to be NULL.
Do not set PGA_REFERENCED flag in pmap_enter_pv().
On ARM any new page reference will result in either entering the new
mapping by calling pmap_enter, etc. or fixing-up the existing mapping in
pmap_fault_fixup().
Therefore we set PGA_REFERENCED flag in the earlier mentioned cases and
setting it later in pmap_enter_pv() is just waste of cycles.
Delete unused pm_pdir pointer from the pmap structure.
Rearrange brackets in the fault cause detection in trap.c
Place the brackets correctly in order to see course of the conditions
instantaneously.
Unify naming in pmap-v6.c and improve style
Use naming common for whole pmap and compatible with other pmaps,
improve style where possible:
pm -> pmap
pg -> m
opg -> om
*pt -> *ptep
*pte -> *ptep
*pde -> *pdep
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Sponsored by: The FreeBSD Foundation, Semihalf
bit in PTE.
Enable Access Flag in CPU control. With AF enabled each valid mapping
needs to have referenced bit in PTE set in order to be able to cache
it in the TLB.
AP[0] bit is to be used as reference flag.
All access permissions are encoded by AP[2:1] wherein AP[1] is in fact
"user enable" and AP[2](APX) is "write disable".
All mappings are always set to be valid. Reference emulation is performed
by setting/clearing reference flag in PTE.
md.pvh_attrs are no longer necessary however pv_flags are still being used
for now.
Marking vm_page as "dirty" or "referenced" is being performed on:
- page or flag fault servicing in pmap_fault_fixup(), basing on the fault
type
- vm_fault servicing in pmap_enter() according to the desired protections
and faulty access type
Redundant page marking has been removed as on ARM we know exactly when the
particular page is referenced or is going to be written.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Sponsored by: The FreeBSD Foundation, Semihalf
o Relax locking assertions for pmap_enter_object() and add them also
to architectures that currently don't have any
o Introduce VM_OBJECT_LOCK_DOWNGRADE() which is basically a downgrade
operation on the per-object rwlock
o Use all the mechanisms above to make vm_map_pmap_enter() to work
mostl of the times only with readlocks.
Sponsored by: EMC / Isilon storage division
Reviewed by: alc
PV entries are now roughly half the size.
Instead of using a shared UMA zone for 28 byte pv entries
(two 8-byte tailq nodes, a 4 byte pointer, a 4 byte address and 4 byte
flags), we allocate a page at a time per process.
This provides 252 pv entries per process (actually, per pmap address space)
and eliminates one of the 8-byte tailq entries since we now can track
per-process pv entries implicitly.
The pointer to the pmap can be eliminated by doing address arithmetic to
find the metadata on the page headers to find a single pointer shared by
all 252 entries. There is an 8-int bitmap for the freelist of those 252
entries.
When in serious low memory condition, allocation of another pv_chunk is
possible by freeing some pages in pmap_pv_reclaim().
Added pv_entry/pv_chunk related statistics to pmap.
pv_entry/pv_chunk statistics can be accessed via sysctl vm.pmap.
Ported PTE freelist of KVA allocation and maintenance from i386.
Using an idea from Stephan Uphoff, use the empty pte's that correspond
to the unused kva in the pv memory block to thread a freelist through.
This allows us to free pages that used to be used for pv entry chunks
since we can now track holes in the kva memory block.
As both ARM pmap.c and pmap-v6.c use the same header and pv_entry, pmap and
md_page structures are different, it was needed to separate code designed
for ARMv6/7 from the one for other ARMs.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Reviewed by: alc
Sponsored by: The FreeBSD Foundation, Semihalf
EABI ARM kernels or clang-compiled ARM kernels.
This fixes a crash seen in clang-compiled ARM
kernels that include WITNESS.
This code could be easily modified to walk the stack
for current clang-generated code (including EABI)
but Andrew Turner has raised concerns that the
stack frame currently emitted by clang isn't actually
required by EABI so such a change might cause problems
down the road.
In case anyone wants to experiment, the change
to support current clang-compiled kernels
involves simply setting FR_RFP=0 and FR_SCP=1.
order to match the MAXCPU concept. The change should also be useful
for consolidation and consistency.
Sponsored by: EMC / Isilon storage division
Obtained from: jeff
Reviewed by: alc
Keep following access permissions:
APX AP Kernel User
1 01 R N
1 10 R R
0 01 R/W N
0 11 R/W R/W
Avoid using reserved in ARMv6 APX|AP settings:
- In case of unprivileged (user) access without permission to write,
the access permission bits were being set to reserved for ARMv6
(but valid for ARMv7) value of APX|AP = 111.
Fix-up faulting userland accesses properly:
- Wrong condition statement in pmap_fault_fixup() caused that
any genuine, unprivileged access was being fixed-up instead of
just skip doing anything and return. Staring from now we ensure
proper reaction for illicit user accesses.
L2_S_PROT_R and L2_S_PROT_U names might be misleading as they do not
reflect real permission levels. It will be clarified in following
patches (switch to AP[2:1] permissions model).
Obtained from: Semihalf
- On ARMADAXP B0 (GP development board) we are not able to use PCI due to
whole 32-bit address space used by 4GB of RAM memory.
- Change is required to destroy unnecessary window to free address space
for PCI and other devices
- Fix offset value for SDRAM decoding windows
Obtained from: Semihalf
to driver specific files.
- window initialization is done during device attach
- CESA TDMA decoding windows values are set based on DTS,
not copied from CPU registers
- remove unnecessary virtual mapping
- update dts file
Obtained from: Semihalf
fork_trampoline (thread entry point) assembler routines, because it's
not possible to unwind beyond those points.
Also insert STOP_UNWINDING in the exception_exit routine, to prevent an
unwind-loop at that point. This is just a stopgap until we get around
to instrumenting all assembler functions with proper unwind metadata.
exit the loop until after printing info about the current frame. Also,
if executing the unwind function for a frame doesn't change the values of
any registers, log that and exit the loop rather than looping endlessly.
Communication on src-commiters, Sat, 27 Apr 2013 22:09:06 -0700,
Subject was: "Re: svn commit: r249997"
As I'm here, fix the style main block comments in files' headers.
