should be noted that newlines are both preserved and included in said byte-
count. If you want to truncate single-line values without regard to line
termination, there's always f_substr() which already exists herein.
FreeBSD. In the IPv6 case, try each interface before returning an error;
each IPv6-enabled interface will have a link-local address even if the link
isn't up.
MFC after: 1 week
PS-POLL support.
This implements PS-POLL awareness i nthe
* Implement frame "leaking", which allows for a software queue
to be scheduled even though it's asleep
* Track whether a frame has been leaked or not
* Leak out a single non-AMPDU frame when transmitting aggregates
* Queue BAR frames if the node is asleep
* Direct-dispatch the rest of control and management frames.
This allows for things like re-association to occur (which involves
sending probe req/resp as well as assoc request/response) when
the node is asleep and then tries reassociating.
* Limit how many frames can set in the software node queue whilst
the node is asleep. net80211 is already buffering frames for us
so this is mostly just paranoia.
* Add a PS-POLL method which leaks out a frame if there's something
in the software queue, else it calls net80211's ps-poll routine.
Since the ath PS-POLL routine marks the node as having a single frame
to leak, either a software queued frame would leak, OR the next queued
frame would leak. The next queued frame could be something from the
net80211 power save queue, OR it could be a NULL frame from net80211.
TODO:
* Don't transmit further BAR frames (eg via a timeout) if the node is
currently asleep. Otherwise we may end up exhausting management frames
due to the lots of queued BAR frames.
I may just undo this bit later on and direct-dispatch BAR frames
even if the node is asleep.
* It would be nice to burst out a single A-MPDU frame if both ends
support this. I may end adding a FreeBSD IE soon to negotiate
this power save behaviour.
* I should make STAs timeout of power save mode if they've been in power
save for more than a handful of seconds. This way cards that get
"stuck" in power save mode don't stay there for the "inactivity" timeout
in net80211.
* Move the queue depth check into the driver layer (ath_start / ath_transmit)
rather than doing it in the TX path.
* There could be some naughty corner cases with ps-poll leaking.
Specifically, if net80211 generates a NULL data frame whilst another
transmitter sends a normal data frame out net80211 output / transmit,
we need to ensure that the NULL data frame goes out first.
This is one of those things that should occur inside the VAP/ic TX lock.
Grr, more investigations to do..
Tested:
* STA: AR5416, AR9280
* AP: AR5416, AR9280, AR9160
If an expander returns 0x00 (no device attached) in the ATTACHED DEVICE
field of the SMP DISCOVER response, ignore the value of ATTACHED SAS
ADDRESS, because it is invalid. Some expanders zero out the address
when the attached device is removed, but others do not. Section
9.4.3.10 of the SAS Protocol Layer 2 revision 04b does not require them
to do so.
Approved by: ken (mentor)
MFC after: 3 weeks
QLogic 8300 Series Adapters
Submitted by: David C Somayajulu (davidcs@freebsd.org) QLogic Corporation
Approved by: George Neville-Neil (gnn@freebsd.org)
specified by passing the XCC, XCXX, and XCPP variables (corresponding to
CC, CXX, and CPP) to buildworld/buildkernel. The compiler must be clang
or be configured to target the appropriate architecture.
To speed build times, if XCC is an absolute path or
WITHOUT_CROSS_COMPILER is defined then no cross compiler will be built
during the cross-tools stage.
Limited documentation of this feature can currently be found at:
https://wiki.freebsd.org/ExternalToolchain
This functionality should be considered experimental and is subject to
change without notice.
Sponsored by: DARPA, AFRL
Discussed with: imp, sjg
PV entries are now roughly half the size.
Instead of using a shared UMA zone for 28 byte pv entries
(two 8-byte tailq nodes, a 4 byte pointer, a 4 byte address and 4 byte
flags), we allocate a page at a time per process.
This provides 252 pv entries per process (actually, per pmap address space)
and eliminates one of the 8-byte tailq entries since we now can track
per-process pv entries implicitly.
The pointer to the pmap can be eliminated by doing address arithmetic to
find the metadata on the page headers to find a single pointer shared by
all 252 entries. There is an 8-int bitmap for the freelist of those 252
entries.
When in serious low memory condition, allocation of another pv_chunk is
possible by freeing some pages in pmap_pv_reclaim().
Added pv_entry/pv_chunk related statistics to pmap.
pv_entry/pv_chunk statistics can be accessed via sysctl vm.pmap.
Ported PTE freelist of KVA allocation and maintenance from i386.
Using an idea from Stephan Uphoff, use the empty pte's that correspond
to the unused kva in the pv memory block to thread a freelist through.
This allows us to free pages that used to be used for pv entry chunks
since we can now track holes in the kva memory block.
As both ARM pmap.c and pmap-v6.c use the same header and pv_entry, pmap and
md_page structures are different, it was needed to separate code designed
for ARMv6/7 from the one for other ARMs.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Reviewed by: alc
Sponsored by: The FreeBSD Foundation, Semihalf
a bug in which certain combinations of arguments produced unexpected results
such as `-dX' (now properly produces debugging and X11), `-XS' (now properly
produces X11 in secure mode), `-df-' (enables debugging when reading a
script from standard-input, etc. Multi-word variations such as `-d -X',
`-X -S', `-d -f-', `-d -f -', etc. also work as expected. Also tested were
variations in argument order, which are now working as expected.
Instead of doing all sorts of weird casting of constants to
pointer-pointers, simply use the standard C offsetof() macro to obtain
the offset of the respective fields in the structures.
Instead of only checking the __STDC_VERSION__, we can also use Clang's
__has_extension() to check for features specifically. This allows us to,
say, use Clang's native _Static_assert() instead of the typedef hack,
making the compiler error messages a lot more readable.
Reviewed by: theraven
Add netif as a requirement of syslogd to get lo0 up. Currently, this
doesn't affect the rc order, because mountcritremote already depends on
netif.
Reviewed by: eadler
Approved by: kenm (mentor)
MFC after: 2 weeks
clang on head between r239347 and r245428.
The former revision introduced CLOCK_PROCESS_CPUTIME_ID as a clock id
for the clock_gettime() function and friends, but it was only added in
<sys/time.h>, not in <time.h>. Any program including <time.h> would
therefore not be able to use CLOCK_PROCESS_CPUTIME_ID, even though the
value of _POSIX_CPUTIME indicates its existence. The latter revision
synchronized the defines again.
Work around this problem by defining the id on the command line for the
particular .cpp file that needs it. If the id ever changes value, this
hack will need to be updated.
* Move the node sleep/wake state under the TX lock rather than the
node lock. Let's leave the node lock protecting rate control only
for now.
* When reassociating, various state needs to be cleared. For example,
the aggregate session needs to be torn down, including any pending
aggregation negotiation and BAR TX waiting.
* .. and we need to do a "cleanup" pass since frames in the hardware
TX queue need to be transmitted.
Modify ath_tx_tid_cleanup() to be called with the TX lock held and push
frames into a completion list. This allows for the cleanup to be
done atomically for all TIDs in a node rather than grabbing and
releasing the TX lock each time.
The cd9660 file system uses that field for the link count and it
was 0. This impacts pwd_mkdb(8) as it checks for st_nlink not being
0 as part of closing a race.
freelist.
o Split the pool of free pages queues really by domain and not rely on
definition of VM_RAW_NFREELIST.
o For MAXMEMDOM > 1, wrap the RR allocation logic into a specific
function that is called when calculating the allocation domain.
The RR counter is kept, currently, per-thread.
In the future it is expected that such function evolves in a real
policy decision referee, based on specific informations retrieved by
per-thread and per-vm_object attributes.
o Add the concept of "probed domains" under the form of vm_ndomains.
It is responsibility for every architecture willing to support multiple
memory domains to correctly probe vm_ndomains along with mem_affinity
segments attributes. Those two values are supposed to remain always
consistent.
Please also note that vm_ndomains and td_dom_rr_idx are both int
because segments already store domains as int. Ideally u_int would
have much more sense. Probabilly this should be cleaned up in the
future.
o Apply RR domain selection also to vm_phys_zero_pages_idle().
Sponsored by: EMC / Isilon storage division
Partly obtained from: jeff
Reviewed by: alc
Tested by: jeff
and the update to 6.1 added SSH_BUG_DYNAMIC_RPORT with the
same value.
Fix the HPN SSH_BUG_LARGEWINDOW bit so it is unique.
Approved by: des
MFC after: 2 weeks
