1. Make sure IPI mask is set before sending the IPI
2. Operate atomically on PS3 PIC outstanding interrupt list
3. Make sure IPIs are EOI'ed before, not after, processing. Without this,
a second IPI could be sent partway through processing the first one,
get erroneously acknowledge by the EOI to the first, and be lost. In
particular in the case of smp_rendezvous(), this can be fatal.
In combination, this makes the PS3 boot SMP again. It probably also fixes
some latent bugs elsewhere.
MFC after: 2 weeks
does an out-of-tree build without setting MAKESYSPATH) and recently
added requirements (JIRA's building the modules in a non-standard
layout). So, when MAKESYSPATH is defined, trust that it will do the
right thing (to catch the JIRA use case). When it isn't defined,
assume a standard FreeBSD tree and reach over to grab bsd.mkopt.mk (to
fix the /usr/ports use case). Both camps cannot be appeased otherwise,
so we have this kludge until it can be sorted out.
If the underlying protocol reported an error (e.g. because a connection was
closed while waiting in the queue), this error was also indicated by
returning a zero-length address. For all other kinds of errors (e.g.
[EAGAIN], [ENFILE], [EMFILE]), *addrlen is unmodified and there are
successful cases where a zero-length address is returned (e.g. a connection
from an unbound Unix-domain socket), so this error indication is not
reliable.
As reported in Austin Group bug #836, modifying *addrlen on error may cause
subtle bugs if applications retry the call without resetting *addrlen.
avoid soft page faults when adding write access to user wired entries in
vm_map_protect(). Previously, we only avoided the soft page fault when
the underlying pages were copy-on-write. In other words, we avoided the
pages faults that might sleep on page allocation, but not the trivial
page faults to update the physical map.
Reviewed by: kib
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
The "bltin/bltin.h" wrappers do not support exit() and attempting
to call it will exit sh completely.
Note that errx() is acceptable but will always return with status 2.
Reported by: jilles (and the testing framework)
Fix by: jilles
Pointyhat: pfg
multiuser again (this commit comes from the PS3 itself). Some problems
still exist with SMP, apparently, as I had to boot a non-SMP kernel to
get here.
or __POSIX_VISIBLE.
Whenever <sys/cdefs.h> sets __BSD_VISIBLE to non-zero, it also sets
__POSIX_VISIBLE and __XSI_VISIBLE to the newest version supported.
No functional change is intended.
running at, guess the nearest value instead of looking for a value within
25 MHz of the observed frequency.
Prior to this change, if a system booted with Intel Turbo Boost enabled,
the dev.cpu.0.freq sysctl is nonfunctional, since the ACPI-reported
frequency for Turbo Boost states does not match the actual clock frequency
(and thus no levels are within 25 MHz of the observed frequency) and the
current performance level is read before a new level is set.
MFC after: 3 days
Relnotes: Bug fix in power management on CPUs with Intel Turbo Boost
the main processing queue, clear the NAK counter for any associated
BULK or CONTROL transfers and poll the endpoint(s) for 1 millisecond
at 125us rate interval, before going into slow, 10ms, NAK polling mode
again. This has the effect that typical ping-ping protocols respond
quicker when initiated from the USB host.
MFC after: 2 weeks
GENERIC64 for PowerPC to use vt with it.
Much to my chagrin, PS3 support seems to have bitrotted somewhat since the
last time I tried it. ehci panics on attach and interrupt handling seems
to be faulty. This should be fixed soon...
On modern ARM SoCs the L2 cache controller sits between the CPU and the
AXI bus, and most on-chip memory-mapped devices are on the AXI bus. We
map the device registers using the 'Device' memory attribute, which means
the memory is not cached, but writes to it are buffered. Ensuring that a
write has made it all the way to a device may require that the L2
controller take some action.
There is currently only one implementation of the new function, for the
PL310 cache controller. It invokes a function that the controller
manual calls "cache sync" but it actually has nothing to do with cache at
all, it triggers a drain of all pending store buffer writes and it blocks
until they complete.
The sheeva and xscale L2 controllers (which predate the concept of Device
memory) don't seem to have a corresponding function. It appears that the
standard armv5 drain_writebuf function includes draining all the way
through the L2 controller.
The last obstacle to switching PowerPC entirely to vt is that the Playstation 3
framebuffer driver needs to be ported over. This only applies for powerpc64,
however.
on my G4 iBook by more than half. Still 10% slower than syscons, but that's
much better than a factor of 2.
The slowness had to do with pathological write performance on 8-bit
framebuffers, which are almost universally used on Open Firmware systems.
Writing 1 byte at a time, potentially nonconsecutively, resulted in many
extra PCI write cycles. This patch, in the common case where it's writing
one or several characters in an 8x8 font, gangs the writes together into
a set of 32-bit writes. This is a port of r143830 to vt(4).
The EFI framebuffer is also extremely slow, probably for the same reason,
and the same patch will likely help there.
H_SAVE_FP is similar to H_SAVE but operates on a FILE* instead of a filename.
This is useful when operating in capability mode.
Reviewed by: christos@NetBSD.org, pfg
On armv4 these are defined as synonyms right now, but it's a bit ambiguous
what NOCACHE means (is buffering/write-combining also enabled or not?); this
is a first step towards replacing PTE_NOCACHE with a less ambiguous name.
actual file storing the semaphore object is different from the file
created on the first open. Store the file st_dev and st_ino members
of the struct stat in the semaphore structure on open, and compare
them with the attributes of the opened file to detect unlink and
re-creation.
This fixes an issue of sem_unlink(3) failing to flush the named entry
in the semaphore list for the current or remote process, making
sem_unlink(3) not correctly operating if the unlinked semaphore is
still opened.
Reported by: Joris Giovannangeli <joris@giovannangeli.fr>
PR: standards/189353
Reviewed by: jilles (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
When getopts finds an invalid option or a missing option-argument, it should
not reset its state and should set OPTIND as normal. This is an old ash bug
that was fixed long ago in dash. Our behaviour now matches most other
shells.
need COW and is writeable (i.e. becoming writeable due to the
mprotect(2) operation), do not create a new backing object for the
entry. The caller of the function is vm_map_protect(), the call is
made to ensure that wired entry has all pages resident and wired in
the top level object and to enable the write. We might need to copy
read-only page from some backing objects into the top object or remap
the page with the write allowed.
This fixes the issue with mishandling of the swap accounting when
read-only wired mapping is upgraded to write-enabled after fork. The
previous code path did not accounted the new object, but it creation
is redundand anyway and the change provides an optimization for the
non-common situation.
Reported by: markj
Suggested and reviewed by: alc (previous version)
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
o KMODDEPS warning is 15 years stale. Remove it.
o MK_CTF will always be defined now, so no need to test to see if it
is defined.
o no need to define MK_FORMAT_EXTENTIONS if undefined anymore.
in them. This is often the case, so just ignore the return
code. Actual errors that are found will also be detected downstream in
the rare cases where the return code is 2 instead of 1.
early built libraries. This should be sufficient for most cases and
has eliminated the issues I've seen with high -j builds. Races likely
still remain, but this knocks the problem down a notch.
